Wire the per-cpupool admission-control switch through libxl
to xl sched-rtds, and document it.
Add -s/--schedparam to list or set pool-wide RTDS scheduler
parameters, and -a/--admission to enable or disable admission
control for a cpupool ("-c pool -s -a 0/1").
Signed-off-by: Furkan Caliskan <frn1furkan10@gmail.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Acked-by: Anthony PERARD <anthony.perard@vates.tech>
Nul-terminated strings are passed in all cases, so the strlen() can very
well be invoked by the function itself. In preparation for a hypervisor
change also include the nul terminator in the size calculation.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Anthony PERARD <anthony.perard@vates.tech>
Reviewed-by: Daniel P. Smith <dpsmith@apertussolutions.com>
More similar to other implementation.
posix_memalign was adde in NetBSD 8.0, released on July 17, 2018
and went out of support on May 4, 2024.
Signed-off-by: Frediano Ziglio <frediano.ziglio@cloud.com>
Acked-by: Anthony PERARD <anthony.perard@vates.tech>
Otherwise it's not possible for device models to map IRQs of devices on
segments different than 0. Keep the same function prototype and pass the
segment in the high 16bits of the bus parameter, like it's done for the
hypercall itself.
Amends: 7620c0cf9a ("PCI multi-seg: add new physdevop-s")
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Release-Acked-by: Oleksii Kurochko <oleksii.kurochko@gmail.com>
Reviewed-by: Anthony PERARD <anthony.perard@vates.tech>
We extract cppc info from "struct xen_get_cpufreq_para", where it acts as
a member of union, and share the space with governor info.
However, it may fail in amd-cppc passive mode, in which governor info and
CPPC info could co-exist, and both need to be printed together via xenpm tool.
If we tried to still put it in "struct xen_get_cpufreq_para" (e.g. just move
out of union), "struct xen_get_cpufreq_para" will enlarge too much to further
make xen_sysctl.u exceed 128 bytes.
So we introduce a new sub-field GET_CPUFREQ_CPPC to dedicatedly acquire
CPPC-related para, and make get-cpufreq-para invoke GET_CPUFREQ_CPPC
if available.
New helpers print_cppc_para() and get_cpufreq_cppc() are introduced to
extract CPPC-related parameters process from cpufreq para.
Signed-off-by: Penny Zheng <Penny.Zheng@amd.com>
Acked-by: Jan Beulich <jbeulich@suse.com> # hypervisor
Acked-by: Anthony PERARD <anthony.perard@vates.tech>
As we are going to add "struct xen_cppc_para" in "struct xen_sysctl_pm_op" as
a new xenpm sub-op later to specifically dealing with CPPC-info, we need to
follow the naming pattern, to change the struct name to "xen_get_cppc_para",
which is more suitable than "xen_cppc_para".
Signed-off-by: Penny Zheng <Penny.Zheng@amd.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Anthony PERARD <anthony.perard@vates.tech>
This was found by the lintian tool (Debian package checker) during
packaging xen for Debian.
Signed-off-by: Maximilian Engelhardt <maxi@daemonizer.de>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
... which converts binary content to hex automatically.
Update libxl to match. No API/ABI change.
This removes a latent libxl bug for cases when the buildid is longer than 4092
bytes.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
... which uses XENVER_extraversion2.
In order to do this sensibly, use manual hypercall buffer handling. Not only
does this avoid an extra bounce buffer (we need to strip the xen_varbuf_t
header anyway), it's also shorter and easlier to follow.
Update libxl and the ocaml stubs to match. No API/ABI change in either.
With this change made, `xl info` can now correctly access a >15 char
extraversion:
# xl info xen_version
4.18-unstable+REALLY LONG EXTRAVERSION
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Christian Lindig <christian.lindig@citrix.com>
Add a new "llc_colors" parameter that defines the LLC color assignment for
a domain. The user can specify one or more color ranges using the same
syntax used everywhere else for color config described in the
documentation.
The parameter is defined as a list of strings that represent the color
ranges.
Documentation is also added.
Golang bindings are regenerated.
Based on original work from: Luca Miccio <lucmiccio@gmail.com>
Signed-off-by: Carlo Nonato <carlo.nonato@minervasys.tech>
Signed-off-by: Marco Solieri <marco.solieri@minervasys.tech>
Reviewed-by: Anthony PERARD <anthony.perard@vates.tech>
Instead of having to include xenctrl.h for getting definitions of cpu
barriers, add a dedicated header for that purpose.
Switch the xen-9pfsd daemon to use the new header instead of xenctrl.h.
This is in preparation of making Xenstore independent from libxenctrl.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Anthony PERARD <anthony.perard@vates.tech>
When dom0 is PVH, and passthrough a device to dumU, xl will
use the gsi number of device to do a pirq mapping, see
pci_add_dm_done->xc_physdev_map_pirq, but the gsi number is
got from file /sys/bus/pci/devices/<sbdf>/irq, that confuses
irq and gsi, they are in different space and are not equal,
so it will fail when mapping.
To solve this issue, to get the real gsi and add a new function
xc_physdev_map_pirq_gsi to get a free pirq for gsi.
Note: why not use current function xc_physdev_map_pirq, because
it doesn't support to allocate a free pirq, what's more, to
prevent changing it and affecting its callers, so add
xc_physdev_map_pirq_gsi.
Besides, PVH dom0 doesn't have PIRQs flag, it doesn't do
PHYSDEVOP_map_pirq for each gsi. So grant function callstack
pci_add_dm_done->XEN_DOMCTL_irq_permission will fail at function
domain_pirq_to_irq. And old hypercall XEN_DOMCTL_irq_permission
requires passing in pirq, it is not suitable for PVH dom0 that
doesn't have PIRQs to grant irq permission.
To solve this issue, use the another hypercall
XEN_DOMCTL_gsi_permission to grant the permission of irq(
translate from gsi) to dumU when dom0 has no PIRQs.
Signed-off-by: Jiqian Chen <Jiqian.Chen@amd.com>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Chen Jiqian <Jiqian.Chen@amd.com>
Reviewed-by: Anthony PERARD <anthony.perard@vates.tech>
On PVH dom0, when passthrough a device to domU, QEMU and xl tools
want to use gsi number to do pirq mapping, see QEMU code
xen_pt_realize->xc_physdev_map_pirq, and xl code
pci_add_dm_done->xc_physdev_map_pirq, but in current codes, the gsi
number is got from file /sys/bus/pci/devices/<sbdf>/irq, that is
wrong, because irq is not equal with gsi, they are in different
spaces, so pirq mapping fails.
And in current codes, there is no method to get gsi for userspace.
For above purpose, add new function to get gsi, and the
corresponding ioctl is implemented on linux kernel side.
Signed-off-by: Jiqian Chen <Jiqian.Chen@amd.com>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Chen Jiqian <Jiqian.Chen@amd.com>
Reviewed-by: Anthony PERARD <anthony.perard@vates.tech>
Introduce a --force option to xen-ucode, in order to bypass certain checks
when applying microcode.
Update libxc's xc_microcode_update() to take an extra parameter, and to use
the new XENPF_microcode_update2 hypercall instead.
Signed-off-by: Fouad Hilly <fouad.hilly@cloud.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
With the XEN_DOMCTL_dt_overlay DOMCTL added, users should be able to
attach (in the future also detach) devices from the provided DT overlay
to domains. Support this by introducing a new "xl dt-overlay" command
and related documentation, i.e. "xl dt-overlay attach. Slightly rework
the command option parsing logic.
Signed-off-by: Henry Wang <xin.wang2@amd.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@amd.com>
Reviewed-by: Jason Andryuk <jason.andryuk@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Introduce a xen-livepatch tool --force option, that's propagated into the
hyerpvisor for livepatch operations. The intention is for the option to be
used to bypass some checks that would otherwise prevent the patch from being
loaded.
Re purpose the pad field in xen_sysctl_livepatch_op to be a flags field that
applies to all livepatch operations. The flag is currently only set by the
hypercall wrappers for the XEN_SYSCTL_LIVEPATCH_UPLOAD operation, as that's so
far the only one where it will be used initially. Other uses can be added as
required.
Note that helpers would set the .pad field to 0, that's been removed since the
structure is already zero initialized at definition.
No functional usages of the new flag introduced in this patch.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
xc_dt_overlay() sends the device tree binary overlay, size of .dtbo and overlay
operation type i.e. add or remove to xen.
Signed-off-by: Vikram Garhwal <vikram.garhwal@amd.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Add xc_set_cpufreq_cppc to allow calling xen_systctl_pm_op
SET_CPUFREQ_CPPC.
Signed-off-by: Jason Andryuk <jandryuk@gmail.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Add a union and struct so that most of the scaling variables of struct
xen_get_cpufreq_para are within in a binary-compatible layout. This
allows cppc_para to live in the larger union and use uint32_ts - struct
xen_cppc_para will be 10 uint32_t's.
The new scaling struct is 3 * uint32_t + 16 bytes CPUFREQ_NAME_LEN + 4 *
uint32_t for xen_ondemand = 11 uint32_t. That means the old size is
retained, int32_t turbo_enabled doesn't move and it's binary compatible.
The out-of-context memcpy() in xc_get_cpufreq_para() now handles the
copying of the fields removed there.
Signed-off-by: Jason Andryuk <jandryuk@gmail.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Like it's done with CPUID, introduce support for passing MSR values to
xc_cpuid_apply_policy(). The chosen format for expressing MSR policy
data matches the current one used for CPUID. Note that existing
callers of xc_cpuid_apply_policy() can pass NULL as the value for the
newly introduced 'msr' parameter in order to preserve the same
functionality, and in fact that's done in libxl on this patch.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
It previously mimicked the getdomaininfo sysctl semantics by returning
the first domid higher than the requested domid that does exist. This
unintuitive behaviour causes quite a few mistakes and makes the call
needlessly slow in its error path.
This patch removes the fallback search, returning -ESRCH if the requested
domain doesn't exist. Domain discovery can still be done through the sysctl
interface as that performs a linear search on the list of domains.
With this modification the xc_domain_getinfo() function is deprecated and
removed to make sure it's not mistakenly used expecting the old behaviour.
The new xc wrapper is xc_domain_getinfo_single().
All previous callers of xc_domain_getinfo() have been updated to use
xc_domain_getinfo_single() or xc_domain_getinfolist() instead. This also
means xc_dominfo_t is no longer used by anything and can be purged.
Resolves: xen-project/xen#105
Signed-off-by: Alejandro Vallejo <alejandro.vallejo@cloud.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Currently it's hard to get CPU's microcode revision from Xen after late
loading without looking into Xen logs, which is not always convenient.
Add a new platform op in order to get the required data from Xen and
provide a wrapper for libxenctrl.
Signed-off-by: Sergey Dyasli <sergey.dyasli@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
It's a stricter version of xc_domain_getinfo() where the returned domid
always matches the requested domid or the error code shows an error instead.
A few patches ahead usages of xc_domain_getinfo() are removed until only
xc_domain_getinfo_single() and xc_domain_getinfolist() remain.
Signed-off-by: Alejandro Vallejo <alejandro.vallejo@cloud.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
xc_domain_getinfo() is slow and prone to races because N hypercalls are
needed to find information about N domains. xc_domain_getinfolist() finds
the same information in a single hypercall as long as a big enough buffer
is provided. Plus, xc_domain_getinfo() is disappearing on a future patch
so migrate the callers interested in more than 1 domain to the the *list()
version.
Signed-off-by: Alejandro Vallejo <alejandro.vallejo@cloud.com>
Acked-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
The existing XEN_DOMCTL_SHADOW_OP_{GET,SET}_ALLOCATION have problems:
* All set_allocation() flavours have an overflow-before-widen bug when
calculating "sc->mb << (20 - PAGE_SHIFT)".
* All flavours have a granularity of 1M. This was tolerable when the size of
the pool could only be set at the same granularity, but is broken now that
ARM has a 16-page stopgap allocation in use.
* All get_allocation() flavours round up, and in particular turn 0 into 1,
meaning the get op returns junk before a successful set op.
* The x86 flavours reject the hypercalls before the VM has vCPUs allocated,
despite the pool size being a domain property.
* Even the hypercall names are long-obsolete.
Implement a better interface, which can be first used to unit test the
behaviour, and subsequently correct a broken implementation. The old
interface will be retired in due course.
The unit of bytes (as opposed pages) is a deliberate API/ABI improvement to
more easily support multiple page granularities.
This is part of XSA-409 / CVE-2022-33747.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Release-acked-by: Henry Wang <Henry.Wang@arm.com>
xc_psr.c:161:5: error: conflicting types for 'xc_psr_cmt_get_data'
due to enum/integer mismatch;
Signed-off-by: Charles Arnold <carnold@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Make the do_memory_op function accessible to tools linking with libxc.
Similar functions are already available for both domctl and sysctl. As part
of this patch we also change the input 'cmd' to be unsigned int to accurately
reflect what the hypervisor expects.
Signed-off-by: Tamas K Lengyel <tamas.lengyel@intel.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Add monitor event that hooks the vmexit handler allowing for both sync and
async monitoring of events. With async monitoring an event is placed on the
monitor ring for each exit and the rest of the vmexit handler resumes normally.
If there are additional monitor events configured those will also place their
respective events on the monitor ring.
With the sync version an event is placed on the monitor ring but the handler
does not get resumed, thus the sync version is only useful when the VM is not
expected to resume normally after the vmexit. Our use-case is primarily with
the sync version with VM forks where the fork gets reset after sync vmexit
event, thus the rest of the vmexit handler can be safely skipped. This is
very useful when we want to avoid Xen crashing the VM under any circumstance,
for example during fuzzing. Collecting all vmexit information regardless of
the root cause makes it easier to reason about the state of the VM on the
monitor side, hence we opt to receive all events, even for external interrupt
and NMI exits and let the monitor agent decide how to proceed.
Signed-off-by: Tamas K Lengyel <tamas.lengyel@intel.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Need to separately specify if the reset is for the memory or for the VM state,
or both.
Signed-off-by: Tamas K Lengyel <tamas.lengyel@intel.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Do this before adding any more stuff to xg_cpuid_x86.c.
The placement in xenctrl.h is wrong, as they are implemented by the
xenguest library. Note that xg_cpuid_x86.c needs to include
xg_private.h, and in turn also fix xg_private.h to include
xc_bitops.h. The bitops definition of BITS_PER_LONG needs to be
changed to not be an expression, so that xxhash.h can use it in a
preprocessor if directive.
As a result also modify xen-cpuid to include xenguest.h.
Reported-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
We need to pass info about maximum supported guest physical
address space size to the toolstack on Arm in order to properly
calculate the base and size of the extended region (safe range)
for the guest. The extended region is unused address space which
could be safely used by domain for foreign/grant mappings on Arm.
The extended region itself will be handled by the subsequent
patch.
Currently the same guest physical address space size is used
for all guests (p2m_ipa_bits variable on Arm, the x86 equivalent
is hap_paddr_bits).
Add an explicit padding after "gpaddr_bits" field and also
(while at it) after "domain" field.
Also make sure that full structure is cleared in all cases by
moving the clearing into getdomaininfo(). Currently it is only
cleared by the sysctl caller (and only once).
Please note, we do not need to bump XEN_DOMCTL_INTERFACE_VERSION
as a bump has already occurred in this release cycle. But we do
need to bump XEN_SYSCTL_INTERFACE_VERSION as the structure is
re-used in a sysctl.
Suggested-by: Julien Grall <jgrall@amazon.com>
Signed-off-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Reviewed-by: Ian Jackson <iwj@xenproject.org>
[hypervisor parts]
Reviewed-by: Jan Beulich <jbeulich@suse.com>
For log-dirty operations a 64-bit field is being truncated to become an
"int" return value. Seeing the large number of arguments the present
function takes, reduce its set of parameters to that needed for all
operations not involving the log-dirty bitmap, while introducing a new
wrapper for the log-dirty bitmap operations. This new function in turn
doesn't need an "mb" parameter, but has a 64-bit return type. (Using the
return value in favor of a pointer-type parameter is left as is, to
disturb callers as little as possible.)
While altering xc_shadow_control() anyway, also adjust the types of the
last two of the remaining parameters.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Christian Lindig <christian.lindig@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Acked-by: Ian Jackson <iwj@xenproject.org>
_hcbuf_buf1 has been there only for a pointer comparison to validate
type compatibility. The same can be achieved by not using typeof() on
the definition of what so far was _hcbuf_buf2, as the initializer has
to also be type-compatible. Drop _hcbuf_buf1 and the comaprison;
rename _hcbuf_buf2.
Since we're already using compiler extensions here, don't be shy and
also omit the middle operand of the involved ?: operator.
Bring line continuation character placement in line with that of
related macros.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Current unit8_t for pirq argument in this interface is too restrictive
causing failures on modern hardware with lots of GSIs. That extends down to
XEN_DOMCTL_irq_permission ABI structure where it needs to be fixed up
as well.
Internal Xen structures appear to be fine. Existing users of the interface
in tree (libxl, ocaml and python bindings) are currently using signed int
for pirq representation which should be wide enough. Converting them to
uint32_t now is desirable to avoid accidental passing of a negative
number (probably denoting an error code) by caller as pirq, but left for
the future clean up.
Domctl interface version is needed to be bumped with this change but that
was already done by 918b8842a8 ("arm64: Change type of hsr, cpsr, spsr_el1
to uint64_t") in this release cycle.
Additionally, take a change and convert allow_access argument to bool.
Signed-off-by: Igor Druzhinin <igor.druzhinin@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Christian Lindig <christian.lindig@citrix.com>
Acked-by: Julien Grall <jgrall@amazon.com>
The guest suspend functionality is already part of libxenguest. Move
the resume functionality from libxenctrl to libxenguest, too.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Wei Liu <wl@xen.org>
It is bad form in C, perhaps best demonstrated by trying to read
xc_cpu_policy_destroy(), and causes const qualification to have
less-than-obvious behaviour (the hidden pointer becomes const, not the thing
it points at).
xc_cpu_policy_set_domain() needs to drop its (now normal) const qualification,
as the policy object is modified by the serialisation operation.
This also shows up a problem with the x86_cpu_policies_are_compatible(), where
the intermediate pointers are non-const.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Roger Pau Monné <roger.pau@citrix.com>
Such helpers is just a wrapper to the existing
x86_cpu_policies_are_compatible function. This requires building
policy.c from libx86 on user land also.
No user of the interface introduced.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Introduce a helper to update the MSR policy using an array of
xen_msr_entry_t entries. Note the MSRs present in the input
xen_msr_entry_t array will replace any existing entries on the
policy.
No user of the interface introduced on this patch.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Introduce a helper to update the CPUID policy using an array of
xen_cpuid_leaf_t entries. Note the leaves present in the input
xen_cpuid_leaf_t array will replace any existing leaves on the policy.
No user of the interface introduced on this patch.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Such helper is very similar to the existing xc_set_domain_cpu_policy
interface, but takes an opaque xc_cpu_policy_t instead of arrays of
CPUID leaves and MSRs.
No callers of the interface introduced in this patch.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
With the introduction of xc_cpu_policy_get_{system,domain} and
xc_cpu_policy_serialise the current users of
xc_get_{system,domain}_cpu_policy can be switched to the new
interface.
Note that xc_get_{system,domain}_cpu_policy is removed from the public
interface and the functions are made static, since there are still
internal consumers in xg_cpuid_x86.c
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Such helper allow converting a cpu policy into an array of
xen_cpuid_leaf_t and xen_msr_entry_t elements, which matches the
current interface of the CPUID/MSR functions. This is required in
order for the user to be able to parse the CPUID/MSR data.
No user of the interface introduced in this patch.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Such helper is based on the existing functions to fetch a CPUID and
MSR policies, but uses the xc_cpu_policy_t type to return the data to
the caller.
No user of the interface introduced on the patch.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Such helper is based on the existing functions to fetch a CPUID and
MSR policies, but uses the xc_cpu_policy_t type to return the data to
the caller.
Note some helper functions are introduced, those are split from
xc_cpu_policy_get_system because they will be used by other functions
also.
No user of the interface introduced on the patch.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Furkan Caliskan