Similar to the existing ENODEV and EXDEV error codes, add EMDEV to
indicate that iommu passthrough is not compatible with paging.
All error codes are just made-up return codes to give proper error
messages in the pager.
Also update the HAP related error message now that paging is enabled
also on AMD hosts.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Ian Jackson <Ian.Jackson@citrix.com>
Acked-by: Tim Deegan <tim@xen.org>
Committed-by: Tim Deegan <tim@xen.org>
Check for this tools, and set the proper paths on config/Tool.mk.
Signed-off-by: Roger Pau Monne <roger.pau@entel.upc.edu>
Committed-by: Ian Jackson <ian.jackson.citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
xc_domain_send_trigger returns -1 and sets errno on failure so use
LIBXL__LOG_ERRNO not LIBXL__LOG_ERRNOVAL(rc).
Change the default case of the switch to set rc=-1,errno=EINVAL too.
Also we weren't actually returning the error code we'd decided on.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
By default pciback only allows PV guests to write "known safe" values into
PCI config space. But many devices require writes to other areas of config
space in order to operate properly. One way to do that is with the "quirks"
interface, which specifies areas known safe to a particular device; the
other way is to mark a device as "permissive", which tells pciback to allow
all config space writes for that domain and device.
This adds a "permissive" flag to the libxl_pci struct and teaches libxl how
to write the appropriate value into sysfs to enable the permissive feature for
devices being passed through. It also adds the permissive config options either
on a per-device basis, or as a global option in the xl command-line.
Because of the potential stability and security implications of enabling
permissive, the flag is left off by default.
Signed-off-by: George Dunlap <george.dunlap@eu.citrix.com>
Committed-by: Ian Jackson <ian.jackson.citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Config parsing functions do not properly belong in libxl. Move them into
libxlu so that others can use them or not as they see fit.
No functional changes. One side-effect was making public a private libxl
utility function which just set the elements of a structure from the function
arguments passed in.
Signed-off-by: George Dunlap <george.dunlap@eu.citrix.com>
Committed-by: Ian Jackson <ian.jackson.citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Move the inclusion of Rules.mk up so that things like CFLAGS get initialized
properly. Currently only zfs appends CFLAGS. If CFLAGS get reset by Rules.mk
the private settings are lost and compilation of zfs support fails.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Committed-by: Ian Jackson <ian.jackson.citrix.com>
In blktap2 MEMSHR_DIR is used before it is set. This removes the
required -D_GNU_SOURCE from CFLAGS, its used as option for -I
Fix this by moving memshr related flags to the place where its actually
used.
The failure is a missing O_DIRECT define.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Committed-by: Ian Jackson <ian.jackson.citrix.com>
QEMU upstream need to kown the amount of RAM given to a guest. This patch give
the correct value.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
Change disable/enable feature macros to have a more significative name
of what they actually do, to avoid confusions.
New macros have the following names:
AX_ARG_DEFAULT_ENABLE: feature is enabled by default, provides the
--disable-{feature} option to disable it.
AX_ARG_DEFAULT_DISABLE: feature is disabled by default, provides the
--enable-{feature] option to enable it.
Signed-off-by: Roger Pau Monne <roger.pau@entel.upc.edu>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Olaf Hering <olaf@aepfle.de>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
At the moment the only easy way to get at these is to strace xl.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Ian Jackson <ian.jackson.citrix.com>
qemu-xen does currently not find the firmware files, such as
vgabios-cirrus.bin. The reason is that qemu-xen uses the default prefix
/usr/local. Use SHAREDIR/qemu-xen as directory so that it can coexist
with qemu-traditional which is installed in SHAREDIR/xen/qemu.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
Linking tpmd will fail with recent toolchains because -lgmp is passed
via LDFLAGS instead of LDLIBS. With this change -lgpm is placed at the
end of the gcc cmdline and linking tpmd succeeds again.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
Upstream the "xen/acpi-processor: C and P-state driver that
uploads said data to hypervisor." takes care of uploading power information
information that normally a cpu frequency scaling driver would using
in the initial domain. We want the hypervisor to take that data and
make good usage of it.
Fortunatly for us we do not have to worry about the native cpu frequency
scaling drivers being loaded first, as the upstream commit:
"xen/cpufreq: Disable the cpu frequency scaling drivers from loading."
takes care of that. Meaning we can load the xen-acpi-processor at any time.
By default that driver is built as a module - and since we are
the only user of it - we should load it.
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Committed-by: Ian Jackson <ian.jackson.citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
One of the bottlenecks with foreign page-in request is the poor retry
handling in linux_privcmd_map_foreign_bulk(). It sends one request per
paged gfn at a time and it waits until the gfn is accessible. This
causes long delays in mmap requests from qemu-dm and xc_save.
Instead of sending one request at a time, walk the entire gfn list and
send batches of mmap requests. They will eventually end up in the pager's
request ring (if it has room again), and will fill up this ring so that
in turn the pager can also process page-in in batches.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Committed-by: Ian Jackson <ian.jackson.citrix.com>
Implement "rtc_timeoffset" and "localtime" options compatible as xm.
rtc_timeoffset is the offset between host time and guest time.
localtime means to specify whether the emulted RTC appears as UTC or is
offset by the host.
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Lin Ming <mlin@ss.pku.edu.cn>
Committed-by: Ian Jackson <ian.jackson.citrix.com>
---
docs/man/xl.cfg.pod.5 | 8 ++++++++
tools/libxl/libxl_create.c | 11 +++++++++++
tools/libxl/libxl_dom.c | 3 +++
tools/libxl/libxl_types.idl | 2 ++
tools/libxl/xl_cmdimpl.c | 5 +++++
5 files changed, 29 insertions(+), 0 deletions(-)
The e820_sanitize() function in libxl_pci.c expects one of its arguments to
be non-zero; but since a recent changeset, it can typically expect *to be*
zero. Since the zero case is handled properly, just remove the check.
Signed-off-by: George Dunlap <george.dunlap@eu.citrix.com>
Committed-by: Ian Jackson <ian.jackson.citrix.com>
Toolstacks which use libxl should not need to use libxc.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Ian Jackson <ian.jackson.citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Check for uuid/uuid.h and if found check for -luuid usability (Linux
case), if not, check for uuid (NetBSD). One of this tests has to
succeed to be able to build Xen tools.
Signed-off-by: Roger Pau Monne <roger.pau@entel.upc.edu>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
Since seabios-dir is cloned during build we need to check that it exists before
recursing into it for clean, following the pattern used for qemu-*-dir etc.
Also remove usage of "buildmakevars2shellvars" except when used to poopulate
the environment for qemu-xen-traditional's xen-setup script, which is the only
user.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
Allow a scheduler to provide a callback to display pool-wide information,
providing a default. This is in preparation for displaying pool-wide
scheduler parameters on this line.
Signed-off-by: George Dunlap <george.dunlap@eu.citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
The domain name stored in /local/domain/$domid/name is simpler to
access and is the only domain name modified by "xl rename". Use this
domain name in libxenstat's reporting.
Signed-off-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
Check for a curses compatible library (curses or ncurses basically).
One of those is needed to compile Xen tools (gtraceview and xentop).
Modify Makefiles/sources to use configure output (fetch CURSES_LIBS
from tools/Tools.mk and header to include from tools/config.h)
Signed-off-by: Roger Pau Monne <roger.pau@entel.upc.edu>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
This limits the ability of the guest to play around with its own rings, and DoS
itself.
Signed-off-by: Andres Lagar-Cavilla <andres@lagarcavilla.org>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Tim Deegan <tim@xen.org>
This solves a long-standing issue in which the pages backing these rings were
pages belonging to dom0 user-space processes. Thus, if the process would die
unexpectedly, Xen would keep posting events to a page now belonging to some
other process.
We update all API-consumers in tree (xenpaging and xen-access).
This is an API/ABI change, so please speak up if it breaks your accumptions.
The patch touches tools, hypervisor x86/hvm bits, and hypervisor x86/mm bits.
Signed-off-by: Andres Lagar-Cavilla <andres@lagarcavilla.org>
Acked-by: Tim Deegan <tim@xen.org>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Tim Deegan <tim@xen.org>
Don't use the superfluous shared page, return the event channel directly as
part of the domctl struct, instead.
In-tree consumers (xenpaging, xen-access) updated. This is an ABI/API change,
so please voice any concerns.
Known pending issues:
- pager could die and its ring page could be used by some other process, yet
Xen retains the mapping to it.
- use a saner interface for the paging_load buffer.
This change also affects the x86/mm bits in the hypervisor that process the
mem_event setup domctl.
Signed-off-by: Andres Lagar-Cavilla <andres@lagarcavilla.org>
Acked-by: Tim Deegan <tim@xen.org>
Acked-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Tim Deegan <tim@xen.org>
This fixes a PV guest breakage causes by 24932:6eac4a1ee646 "libxl: Select BIOS
using libxl_domain_build_info_setdefaults".
I have also included a sanity check on b_info->type.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Committed-by: Ian Campbell <ian.campbell@citrix.com>
`xenpvnetboot' supports getting boot images from following locations:
- http://host/path
- https://host/path
- ftp://host/path
- file:///path
- tftp://host/path
- nfs:host:/path
- /path
- /path/file.iso
- /path/filesystem.img
- /dev/sda1
- nfs+iso:host:/path/file.iso
- nfs+iso:host:/path/filesystem.img
To use it, make `xenpvnetboot' as bootloader for PV guest::
bootloader = '/usr/bin/xenpvnetboot'
To get boot images from various locations, set the right bootloader
arguments, e.g.:
bootloarder_args = ['--location=http://192.168.0.1/fedora/x86_64']
bootloarder_args = ['--location=ftp://192.168.0.1/fedora/x86_64']
bootloarder_args = ['--location=file:///fedora/x86_64']
bootloarder_args = ['--location=tftp://192.168.0.1/fedora/x86_64']
bootloarder_args = ['--location=/fedora/x86_64']
bootloarder_args = ['--location=/fedora/Fedora-16-x86_64-DVD.iso']
bootloarder_args = ['--location=nfs:192.168.0.1:/fedora/x86_64']
bootloarder_args = ['--location=nfs+iso:192.168.0.1:/fedora/Fedora-16-x86_64-DVD.iso']
You can use `kernel' and `ramdisk' to specify the relative path of
boot kernel and ramdisk. `xenpvnetboot' will join them with the
location to find the boot kernel and ramdisk, e.g.:
kernel = 'images/pxeboot/vmlinuz'
ramdisk = 'images/pxeboot/initrd.img'
bootloarder_args = ['--location=http://192.168.0.1/fedora/x86_64']
kernel = 'fedora/x86_64/images/pxeboot/vmlinuz'
ramdisk = 'fedora/x86_64/images/pxeboot/initrd.img'
bootloarder_args = ['--location=http://192.168.0.1/']
You can also omit the `--location' option and specify the full URL for
`kernel' and `ramdisk' directly, e.g.:
kernel = 'http://192.168.0.1/fedora/x86_64/images/pxeboot/vmlinuz'
ramdisk = 'http://192.168.0.1/fedora/x86_64/images/pxeboot/initrd.img'
If only `--location' is specified and `kernel' and `ramdisk' are not
specified, `xenpvnetboot' will search the following places for boot
images from the location::
('images/xen/vmlinuz', 'images/xen/initrd.img'), # Fedora <= 10 and OL = 5
('boot/i386/vmlinuz-xen', 'boot/i386/initrd-xen'), # openSUSE >= 10.2 and SLES >= 10
('boot/x86_64/vmlinuz-xen', 'boot/x86_64/initrd-xen'), # openSUSE >= 10.2 and SLES >= 10
('current/images/netboot/xen/vmlinuz', 'current/images/netboot/xen/initrd.gz'), # Debian
('images/pxeboot/vmlinuz', 'images/pxeboot/initrd.img'), # Fedora >=10 and OL >= 6
('isolinux/vmlinuz', 'isolinux/initrd.img'), # Fedora >= 10 and OL >= 6
`xenpvnetboot' requires python module `urlgrabber'
http://urlgrabber.baseurl.org/.
Signed-off-by: Zhigang Wang <zhigang.x.wang@oracle.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
Build stubxenstore only when building stubdomains.
Fixes build failure on platforms w/o the relevant ioctl.
Signed-off-by: Christoph Egger <Christoph.Egger@amd.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
Introduce an empty implementation of the arch specific ARM functions in
xc_core_arm.c and xc_core_arm.h; define barriers on ARM.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Committed-by: Ian Jackson <ian.jackson.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Even if python version is 2.4.3 which is newer than the required
version 2.3, the configure script still raises a version issue. I
tested my patch with python 2.6.6 and 2.4.3. It will fix a syntax
error like the following.
checking for python version >= 2.3 ... Traceback (most recent call last):
File "<string>", line 1, in ?
TypeError: 'str' object is not callable
no
configure: error: Python 2.4.3 is too old, minimum required version is 2.3
Signed-off-by: Yongjie Ren <yongjie.ren@intel.com>
Acked-by: Roger Pau Monne <roger.pau@entel.upc.edu>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
Olaf Hering
Roger Pau Monne
Ian Campbell
George Dunlap
Anthony PERARD
Konrad Rzeszutek Wilk
Lin Ming
Attilio Rao
Jan Beulich
Andrew Cooper
Fabio Fantoni
Ian Jackson
Marek Marczykowski
Daniel De Graaf
Wei Liu
Andres Lagar-Cavilla
Tim Deegan
Zhigang Wang
Christoph Egger
Stefano Stabellini
Yongjie Ren