RPM based packaging systems expect binaries to have debug symbols which get
placed in a separate debuginfo RPM.
Split the concept of a debug build up so that binaries can be built with
debugging symbols without having the other gubbins which $(debug) implies, most
notibly frame pointers.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Tested-by: Ian Jackson <ian.jackson@eu.citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
This patch was constructed by grepping for xensource.com over the entire
repository and eyeballing which ones were sensible to update.
In addition, the xen-tools mailing list has been deprecated, so update xentop
to refer to xen-devel instead.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Ian Campbell <ian.campbell@citrix.com>
Currently shared libraries are automatically installed into /usr/lib
or /usr/lib64, depending on the supplied --prefix value and
$(XEN_TARGET_ARCH). Some systems, like recent Debian and Ubuntu releases,
do not use /usr/lib64, but instead /usr/lib/x86_64-linux-gnu.
With this change, packagers can supply the desired location for shared
libraries on the ./configure command line. Packagers need to note that
the default behaviour on 64-bit Linux systems will be to install shared
libraries in /usr/lib, not /usr/lib64, unless a --libdir value is provided
to ./configure.
Additionally, the libfsimage plugins are now loaded explicitly from
$LIBDIR/fs, removing platform-based decision trees in code.
Signed-off-by: Matt Wilson <msw@amazon.com>
Acked-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
[ ijc -- resolve rejects in configure by rerunning autogen.sh. Dropped changes
to remove m4/default_lib.m4 and update m4/pkg.m4 since they cause LIBDIR=/lib
instead of /usr/lib. Reran ./autogen.sh after that too ]
Committed-by: Ian Campbell <ian.campbell@citrix.com>
The xenstore header xs.h is producing conflicts with other software[1].
xs is a too short identifier and does not matche the library. Renaming
the headers to xenstore.h and xenstore_lib.h is the easiest way to make
them easy recognizable and prevent furthe problems.
[1]: http://bugs.debian.org/668550
[ Also update QEMU_TAG, to bring in corresponding change to
qemu-xen-traditional. -iwj ]
Signed-off-by: Bastian Blank <waldi@debian.org>
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
--HG--
rename : tools/xenstore/xs.h => tools/xenstore/xenstore.h
rename : tools/xenstore/xs_lib.h => tools/xenstore/xenstore_lib.h
clang complains about a lot of functions and macros whose return value
is unused. I started on patches to drop some functions' return values
and scatter (void)s around callers, but it was getting too messy.
Just turn off the warning instead.
Signed-off-by: Tim Deegan <tim@xen.org>
Acked-by: Keir Fraser <keir@xen.org>
Committed-by: Tim Deegan <tim@xen.org>
Switch to recently released 1.6.3.2 from upstream. This incorporates all the
changesets which we previously applied to 1.6.3.1.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
When adding autoconf support, the configuration options for XSM and
FLASK_ENABLE were incorrectly removed from Config.mk and added to the
tools configuration. Since these are hypervisor configuration options,
they should not depend on running tools configuration.
Signed-off-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
...when specified in the guest configuration file.
This work is somewhat based on Bei Guan effort during the SoC 2011 and
relies on upstream edk2/ovmf Tianocore ROM to be built separately and
manually copied as:
Build/OvmfX64/DEBUG_GCC44/FV/OVMF.fd ->
tools/firmware/ovmf/ovmf-x64.bin
Build/OvmfIa32/DEBUG_GCC44/FV/OVMF.fd ->
toolf/firmware/ovmf/ovmf-ia32.bin
A way to integrate OVMF build directly into XEN has still be discussed
on the mailing list appropriately.
Signed-off-by: Attilio Rao <attilio.rao@citrix.com>
Disable CONFIG_OVMF by default as ovmf is not integrated into the
build.
Signed-off-by: Keir Fraser <keir@xen.org>
Committed-by: Keir Fraser <keir@xen.org>
Added autotools magic to replace custom check scripts. The previous
checks have been ported to autoconf, and some additional ones have
been added (plus the suggestions from running autoscan). Two files are
created as a result from executing configure script, config/Tools.mk
and config.h.
conf/Tools.mk is included by tools/Rules.mk, and contains most of the
options previously defined in .config, that can now be set passing
parameters or defining environment variables when executing configure
script.
config.h is only used by libxl/xl to detect yajl_version.h.
[ tools/config.sub and config.guess copied from
autotools-dev 20100122.1 from Debian squeeze i386,
which is GPLv2.
tools/configure generated using the included ./autogen.sh
which ran autoconf 2.67-2 from Debian squeeze i386. autoconf
is GPLv3+ but has a special exception for the autoconf output;
this exception applies to us and exempts us from complying
with GPLv3+ for configure, which is good as Xen is GPL2 only.
- Ian Jackson ]
Signed-off-by: Roger Pau Monne <roger.pau@entel.upc.edu>
Tested-by: Ian Jackson <ian.jackson@eu.citrix.com>
Committed-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
This patch introduces configuration options allowing to built either a
rombios only or a seabios only hvmloader.
Building option ROMs like vgabios or etherboot is only enabled for a
rombios hvmloader, since SeaBIOS takes care or extracting option ROMs
itself from the PCI devices (these option ROMs are provided by the
device model and do not need to be built in hvmloader).
The Makefile in tools/firmware/ now only checks for bcc if rombios is
enabled.
These two configuration options are left on by default to remain
compatible.
Signed-off-by: Julian Pidancet <julian.pidancet@gmail.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
To remain consistent with how other ROMs are built into hvmloader,
call mkhex on etherboot ROMs from the hvmloader directory, instead of
the etherboot directory. In other words, eb-roms.h is not used any
more.
Introduce ETHERBOOT_NICS config option to choose which ROMs should be
built (kept rtl8139 and 8086100e per default as before).
Signed-off-by: Julian Pidancet <julian.pidancet@gmail.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Build tests as part of the tools build.
It is enabled with CONFIG_TESTS in Config.mk
Currently disabled build of tests/regressions and tests/xen-access (in
32-bit mode) as they fail.
Signed-off-by: Andres Lagar-Cavilla <andres@lagarcavilla.org>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Keir Fraser <keir@xen.org>
This patch adds support for yajl versions 2.x, while retaining 1.x
compatibility. All the needed ifdefs can be found in libxl_json.h.
Signed-off-by: Roger Pau Monne <roger.pau@entel.upc.edu>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
The latter is GPL which makes the whole of mini-os GPL rather than BSD
as intended. In tree users are all GPL or GPL-compatible but we should
fix this so that mini-os is BSD. Do so by using the same BSD
sys/queue.h as we use in libxl.
Tested with the builtin mini-os test app and qemu stubdomain, both of which
appear to still function as expected.
Move tools/libxl/external and the associated sed script to
tools/include/xen-external to allow more sensible access from mini-os.
Also add s/NULL/0/ in the sed script due to NULL not always being
defined in stubdom code when mini-os/wait.h is included.
As well as the obvious ABI changes there are a few API updates
associated with the change:
- struct rw_semaphore.wait_list is unused
- remove_waiter needs to take the wait_queue_head
The latter requires a qemu update, so there is also a QEMU_TAG
update in this changeset.
I sprinkled some extra-emacs local variables around the files I edited
which didn't have them.
I think this should be backported to the stable branches since
external users of mini-os may have been mislead into thinking they
could safely link mini-os against GPL-incompatible code.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Detect if libiconv is present in the system, since we will have to
link against it when using iconv.
Signed-off-by: Roger Pau Monne <roger.pau@entel.upc.edu>
Committed-by: Ian Jackson <ian.jackson.citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
GNU make prior to 3.81 doesn't support $(realpath ...). This fixes a
regression introduced in 23368:0f670f5146c8 (the option tested via
cc-option-add got interpreted as the argument of the -I compiler
option, as its intended argument was blank, and hence the compiler was
falsely considered to support *any* option in the pciutils sub-tree).
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Keir Fraser <keir@xen.org>
It has been hiding actual mistakes, and there are not too many changes
necessary to make things build without suppressing this warning.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Keir Fraser <keir@xen.org>
Keir Fraser
Ian Jackson
Andrew Cooper
Matt Wilson
Ian Campbell
Roger Pau Monne
Tim Deegan
Attilio Rao
Daniel De Graaf
Julian Pidancet
Andres Lagar-Cavilla
Roger Pau Monne
Jan Beulich