As recommended in http://www.gnu.org/licenses/gpl-howto.en.html.
This is the result of:
$ git grep -El Mass\|Temple\|Franklin | xargs ./fsf.pl
Where fsf.pl is:
#!/usr/bin/perl -w -pi.bak -0777
my $repl = 'If not, see <http://www.gnu.org/licenses/>.';
my $br = qr/(?:\s*\n\s*(?:[\*\#]|\/\/|\.\\" )?\s*|\s+)/;
my $inwt = qr/[Ii]f${br}not,${br}write${br}(?:to${br})?the${br}Free${br}Software${br}Foundation,(?:${br}Inc\.,)?/;
my $mass = qr/675${br}Mass${br}Ave,?${br}Cambridge,?${br}MA${br}02139,?${br}USA,?\.?/;
my $franklin = qr/51${br}Franklin${br}St(?:reet)?(?:,${br}| - )Fifth${br}Floor,?${br}Boston,?${br}MA,?${br}02110-1301,?${br}USA,?\.?/;
my $temple = qr/59${br}Temple${br}Place(?:,${br}| - )Suite${br}330,?${br}Boston,?${br}MA,?${br}021110?-1307,?${br}USA,?\.?/;
s|$inwt$br$mass|$repl|m;
s|$inwt$br$franklin|$repl|m;
s|$inwt$br$temple|$repl|m;
The only remaining mentions of these addresses are in COPYING files which I
haven't touched.
Some of the changed files are imports from elsewhere, however
filtering them out is tricky, I think it is tolerable to have these
files be modified here and then perhaps reverted on the next sync,
since it's only 1-2 lines and obvious what is going on.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Thus far mem_access and mem_sharing memops had been able to signal
to Xen to start pulling responses off the corresponding rings. In this patch
we retire these memops and add them to the option to the vm_event_op domctl.
The vm_event_op domctl suboptions are the same for each ring thus we
consolidate them into XEN_VM_EVENT_ENABLE/DISABLE/RESUME.
As part of this patch in libxc we also rename the mem_access_enable/disable
functions to monitor_enable/disable and move them into xc_monitor.c.
Signed-off-by: Tamas K Lengyel <tamas.lengyel@zentific.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Tim Deegan <tim@xen.org>
In this patch we mechanically rename mem_event to vm_event. This patch
introduces no logic changes to the code. Using the name vm_event better
describes the intended use of this subsystem, which is not limited to memory
events. It can be used for off-loading the decision making logic into helper
applications when encountering various events during a VM's execution.
Signed-off-by: Tamas K Lengyel <tamas.lengyel@zentific.com>
Acked-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Acked-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
The only use-case of the mem_event_op structure had been in mem_paging,
thus renaming the structure mem_paging_op and relocating its associated
functions clarifies its actual usage.
As part of this fix-up we also convert the gfn's in the toolstack to be
explicitely 64-bit wide and clean the code a bit.
Signed-off-by: Tamas K Lengyel <tamas.lengyel@zentific.com>
Acked-by: Tim Deegan <tim@xen.org>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
The name of one of the mem_event rings still implies it is used only
for memory accesses, which is no longer the case. It is also used to
deliver various HVM events, thus the name "monitor" is more appropriate
in this setting.
Couple functions incorrectly labeled as part of mem_event is also renamed
to reflect that they belong to mem_access.
The mem_event subop definitions are also shortened to be more meaningful.
The tool side changes are only mechanical renaming to match these new names.
Signed-off-by: Tamas K Lengyel <tamas.lengyel@zentific.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
The emacs variable to set the C style from a local variable block is
c-file-style, not c-set-style.
Signed-off-by: David Vrabel <david.vrabel@citrix.com
This solves a long-standing issue in which the pages backing these rings were
pages belonging to dom0 user-space processes. Thus, if the process would die
unexpectedly, Xen would keep posting events to a page now belonging to some
other process.
We update all API-consumers in tree (xenpaging and xen-access).
This is an API/ABI change, so please speak up if it breaks your accumptions.
The patch touches tools, hypervisor x86/hvm bits, and hypervisor x86/mm bits.
Signed-off-by: Andres Lagar-Cavilla <andres@lagarcavilla.org>
Acked-by: Tim Deegan <tim@xen.org>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Tim Deegan <tim@xen.org>
Don't use the superfluous shared page, return the event channel directly as
part of the domctl struct, instead.
In-tree consumers (xenpaging, xen-access) updated. This is an ABI/API change,
so please voice any concerns.
Known pending issues:
- pager could die and its ring page could be used by some other process, yet
Xen retains the mapping to it.
- use a saner interface for the paging_load buffer.
This change also affects the x86/mm bits in the hypervisor that process the
mem_event setup domctl.
Signed-off-by: Andres Lagar-Cavilla <andres@lagarcavilla.org>
Acked-by: Tim Deegan <tim@xen.org>
Acked-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Tim Deegan <tim@xen.org>
With changeset 24364:0964341efd65 an event channel based notification of
new responses in the ringbuffer is implemented. This makes the memevent
interface obsolete. Currently a call to p2m_mem_paging_resume() is
triggered twice by xenpaging, once per memevent and once per even
channel. In practice this double call does not lead to issues because
p2m_mem_paging_resume() processes only available events.
xenpaging used the event channel notification since the beginning, but
it was a no-op until changeset mentioned above. This change removes the
unneeded XENMEM_paging_op_resume functionality. Pagers are notified via
an event channel of new requests, and now they are required to notify
the hypervisor about their responses also with an event channel.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Tim Deegan <tim@xen.org>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
Per page operations in the paging, sharing, and access tracking subsystems are
all implemented with domctls (e.g. a domctl to evict one page, or to share one
page).
Under heavy load, the domctl path reveals a lack of scalability. The domctl
lock serializes dom0's vcpus in the hypervisor. When performing thousands of
per-page operations on dozens of domains, these vcpus will spin in the
hypervisor. Beyond the aggressive locking, an added inefficiency of blocking
vcpus in the domctl lock is that dom0 is prevented from re-scheduling any of
its other work-starved processes.
We retain the domctl interface for setting up and tearing down
paging/sharing/mem access for a domain. But we migrate all the per page
operations to use the memory_op hypercalls (e.g XENMEM_*).
Signed-off-by: Andres Lagar-Cavilla <andres@lagarcavilla>
Signed-off-by: Adin Scannell <adin@scannell.ca>
Acked-by: Tim Deegan <tim@xen.org>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Committed-by: Tim Deegan <tim@xen.org>
mlock and munlock are implemented as macros in mini-os. Their usage
requires casting in common code. Convert them to C syntax and provide
an empty dummy function. Remove the now unneeded (void) cast from two
munlock calls.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Bring xc_mem_paging.c in line with other users of munlock in libxc.
Otherwise it trips over -Werror=unused-value
Signed-off-by: Tim Deegan <tim@xen.org>
xc_mem_paging_load() does not pass errors in errno and the actual
errno from xc_mem_event_control() is overwritten by munlock().
xenpaging_populate_page() needs to check errno, but with the switch to
xc_mem_paging_load() it could not receive ENOMEM anymore.
Update xc_mem_paging_load() to return -1 and preserve errno during
munlock().
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Andres Lagar-Cavilla <andres@lagarcavilla.org>
Committed-by: Keir Fraser <keir@xen.org>
Up to now a single ring buffer was used for mem_share, xenpaging and
xen-access. Each helper would have to cooperate and pull only its own
requests from the ring. Unfortunately this was not implemented. And
even if it was, it would make the whole concept fragile because a crash
or early exit of one helper would stall the others.
What happend up to now is that active xenpaging + memory_sharing would
push memsharing requests in the buffer. xenpaging is not prepared for
such requests.
This patch creates an independet ring buffer for mem_share, xenpaging
and xen-access and adds also new functions to enable xenpaging and
xen-access. The xc_mem_event_enable/xc_mem_event_disable functions will
be removed. The various XEN_DOMCTL_MEM_EVENT_* macros were cleaned up.
Due to the removal the API changed, so the SONAME will be changed too.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Tim Deegan <tim@xen.org>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Committed-by: Tim Deegan <tim@xen.org>
# User Ian Campbell <ian.campbell@citrix.com>
# Date 1282671421 -3600
# Node ID d1dd29a470ef1b9d2c77478a123326036dfe90bb
# Parent d7a4adad9c328decbd384d87b23001aea8951b86
tools/libxc, tools/libelf: Relicense under LGPL v2.1
Relicense these two libraries under LGPL v2.1 only except where
individual files already included the "or later" provision.
Copyright holders have been contacted by Stephen Spector and have all
agreed this change.
Removed tools/libxc/ia64/aclinux.h since it appeared to be
unused. There is a separate, more up to date, copy in
xen/include/acpi/platform/aclinux.h which does appear to be used.
Clarify the license of MiniOS privcmd.h under the same terms as other
tools/include/xen-sys headers.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Stephen Spector <stephen.spector@citrix.com>
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
This patch eliminate the global variables in libxenctrl (used for
logging and error reporting).
Instead the information which was in the global variables is now in a
new xc_interface* opaque structure, which xc_interface open returns
instead of the raw file descriptor; furthermore, logging is done via
xentoollog.
There are three new parameters to xc_interface_open to control the
logging, but existing callers can just pass "0" for all three to get
the old behaviour.
All libxc callers have been adjusted accordingly.
Also update QEMU_TAG for corresponding qemu change.
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Ian Campbell
Tamas K Lengyel
Olaf Hering
David Vrabel
Tim Deegan
Andres Lagar-Cavilla
Keir Fraser