libxl__device_nic_devname used to hardcode backend network interfaces
as "vif<domid>.<handle>", remove this limitation and allow libxl to
deal with OS-specific interface names.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Cc: Ian Jackson <Ian.Jackson@eu.citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Commit 60f7376 "xen/arm: Inject an undefined instruction when the coproc/sysreg
is not handled" replaced panic by gdprintk.
Unfortunately panic message string doesn't need newline, rather than gdprintk
will request one.
Signed-off-by: Julien Grall <julien.grall@linaro.org>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
The function create_xen_entries creates mappings in second-level page tables
which is shared between every CPU.
Only flushing TLBs on local processor may result to wrong behaviour
when io{re,un}map is used.
Signed-off-by: Julien Grall <julien.grall@linaro.org>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
The syndrome value is printed in hexadecimal. Prefix it by 0x for less
confusion.
Signed-off-by: Julien Grall <julien.grall@linaro.org>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
From Xen point of view, ARM guests are PV guest with paging auto translate
enabled.
When IOMMU support will be added for ARM, mapping grant ref will always crash
Xen due to the BUG_ON in __gnttab_map_grant_ref.
On x86:
- PV guests always have paging mode translate disabled
- PVH and HVM guests have always paging mode translate enabled
It means that we can safely replace the check that the domain is a PV guests
by checking if the guest has paging mode translate enabled.
Signed-off-by: Julien Grall <julien.grall@linaro.org>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Cc: Keir Fraser <keir@xen.org>
apply_p2m_changes needs to switch to another VTTBR temporarily to avoid
flush every TLBs.
As it's only needed there, we can restrict the scope where the VTTBR of this
domain is loaded.
Signed-off-by: Julien Grall <julien.grall@linaro.org>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
The memory pointed by this pointer is not modified in clean_xen_dcache_va_range
and clean_and_invalidate_xen_dcache_va_range.
Constify it. This will allow us to use theses helpers later in code which use
const.
Signed-off-by: Julien Grall <julien.grall@linaro.org>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
The current dt_route_irq_to_guest implementation sets IRQ_GUEST even if the
IRQ is correctly setup.
An IRQ can be shared between devices, if the devices are not assigned to the
same domain or Xen, then this could result in routing the IRQ to the domain
instead of Xen ...
Also avoid to relying on wrong the behaviour when Xen is routing an IRQ to
DOM0. Therefore check the return code from route_dt_irq_to_guest in
map_device.
Signed-off-by: Julien Grall <julien.grall@linaro.org>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
When an IRQ is handling by Xen, setup is done in 2 steps:
- Route the IRQ to the current CPU and set priorities
- Set up the handler
For PPIs, these steps are called on every cpu. For SPIs, they are only called
on the boot CPU.
Dividing the setup in two step complicates the code when a new driver is
added to Xen (for instance a SMMU driver). Xen can safely route the IRQ
when the driver sets up the interrupt handler.
Signed-off-by: Julien Grall <julien.grall@linaro.org>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
When multiple action are supported, gic_irq_{startup,shutdown} will have
to be called in the same critical section as setup/release.
Otherwise there is a race condition if at the same time CPU A is calling
release_dt_irq and CPU B is calling setup_dt_irq.
This could end up with the IRQ not being enabled.
At the same time, modify gic_irq_{enable,disable} to require desc.lock be held.
With both of theses changes, ARM's locking requirements is the same as x86's.
Signed-off-by: Julien Grall <julien.grall@linaro.org>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
This function retrieves a domain from an IRQ. It will be used in several
places (such as do_IRQ) to avoid duplicated code when multiple action will be
supported.
Signed-off-by: Julien Grall <julien.grall@linaro.org>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
The file gic.c contains functions and variables which is not related to the GIC:
- release_irq
- setup_irq
- gic_route_irq_to_guest
- {,local_}irq_desc
Move all theses functions/variables in irq.c
Signed-off-by: Julien Grall <julien.grall@linaro.org>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
The function gic_route_irq_to_guest contains code which is not related to the
GIC. Split the function in 2 parts:
- route_dt_irq_to_guest: setup the desc
- gic_route_irq_to_guest: setup correctly the GIC and the desc handler
Signed-off-by: Julien Grall <julien.grall@linaro.org>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
These functions will be used in SMMU driver which request interrupt when
a device is assigned to a guest.
Signed-off-by: Julien Grall <julien.grall@linaro.org>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
The IRQ number is already provided by desc and __setup_irq doesn't use
it in any case.
Signed-off-by: Julien Grall <julien.grall@linaro.org>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
The function gic_set_irq_properties is only called in two places:
- gic_route_irq: the gic.lock is only taken for the call to the
former function.
- gic_route_irq_to_guest: the gic.lock is taken for the duration of
the function. But the lock is only useful when gic_set_irq_properties.
So we can safely move the lock in gic_set_irq_properties and restrict the
critical section for the gic.lock in gic_route_irq_to_guest.
Signed-off-by: Julien Grall <julien.grall@linaro.org>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Most of no_irq_type callback are already defined in common/irq.c. We don't
need to recreate our own callbacks.
Signed-off-by: Julien Grall <julien.grall@linaro.org>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
The function is nearly only used to retrieve the IRQ number.
There is one place where the IRQ type is used (in domain_build.c) but
as the timer IRQ is virtualised for guest we might not have the same property
(e.g active-low level sensitive interrupt).
Replace timer_dt_irq by timer_get_irq which will return the IRQ number.
Signed-off-by: Julien Grall <julien.grall@linaro.org>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
In a number of cases, loops over each vCPU in a domain are involved
here. For large numbers of vCPU-s these may still take some time to
complete, but we're limiting them at a couple of thousand at most, so I
would think this should not by itself be an issue. I wonder though
whether it shouldn't be possible to have XSM restrict the vCPU count
that can be set through XEN_DOMCTL_max_vcpus.
XEN_DOMCTL_pausedomain:
A loop over vcpu_sleep_sync() for each of vCPU in the domain. That
function itself has a loop waiting for the subject vCPU to become non-
runnable, which ought to complete quickly (involving an IPI to be sent
and acted on). No other unbounded resource usage.
XEN_DOMCTL_unpausedomain:
Simply a loop calling vcpu_wake() (not having any loops or other
resource usage itself) for each of vCPU in the domain.
XEN_DOMCTL_getdomaininfo:
Two loops (one over all domains, i.e. bounded by the limit of 32k
domains, and another over all vCPU-s in the domain); no other
unbounded resource usage.
XEN_DOMCTL_getpageframeinfo:
Inquiring just a single MFN, i.e. no loops and no other unbounded
resource usage.
XEN_DOMCTL_getpageframeinfo{2,3}:
Number of inquired MFNs is limited to 1024. Beyond that just like
XEN_DOMCTL_getpageframeinfo.
XEN_DOMCTL_getvcpuinfo:
Only obtaining information on the vCPU, no loops or other resource
usage.
XEN_DOMCTL_setdomainhandle:
Simply a memcpy() of a very limited amount of data.
XEN_DOMCTL_setdebugging:
A domain_{,un}pause() pair (see XEN_DOMCTL_{,un}pausedomain) framing
the setting of a flag.
XEN_DOMCTL_hypercall_init:
Initializing a guest provided page with hypercall stubs. No other
resource consumption.
XEN_DOMCTL_arch_setup:
IA64 leftover, interface structure being removed from the public
header.
XEN_DOMCTL_settimeoffset:
Setting a couple of guest state fields. No other resource consumption.
XEN_DOMCTL_getvcpuaffinity:
XEN_DOMCTL_getnodeaffinity:
Involve temporary memory allocations (approximately) bounded by the
number of CPUs in the system / number of nodes built for, which is
okay. Beyond that trivial operation.
XEN_DOMCTL_real_mode_area:
PPC leftover, interface structure being removed from the public
header.
XEN_DOMCTL_resumedomain:
A domain_{,un}pause() pair framing operation very similar to
XEN_DOMCTL_unpausedomain (see above).
XEN_DOMCTL_sendtrigger:
Injects an interrupt (SCI or NMI) without any other resource
consumption.
XEN_DOMCTL_subscribe:
Updates the suspend event channel, i.e. affecting only the controlled
domain.
XEN_DOMCTL_disable_migrate:
XEN_DOMCTL_suppress_spurious_page_faults:
Just setting respective flags on the domain.
XEN_DOMCTL_get_address_size:
Simply reading the guest property.
XEN_DOMCTL_set_opt_feature:
Was already tagged IA64-only.
XEN_DOMCTL_set_cpuid:
MAX_CPUID_INPUT bounded loop, which is okay. No other resource
consumption.
XEN_DOMCTL_get_machine_address_size:
Simply obtaining the value set by XEN_DOMCTL_set_machine_address_size
(or the default set at domain creation time).
XEN_DOMCTL_gettscinfo:
XEN_DOMCTL_settscinfo:
Reading/writing of a couple of guest state fields wrapped in a
domain_{,un}pause() pair.
XEN_DOMCTL_audit_p2m:
Enabled only in debug builds.
XEN_DOMCTL_set_max_evtchn:
While the limit set here implies other (subsequent) resource usage,
this is the purpose of the operation.
I also verified that all removed domctls' handlers don't leak
hypervisor memory contents .
Inspected but questionable (and hence left in place for now):
XEN_DOMCTL_max_mem:
While only setting the field capping a domain's allocation (this
implies potential successive resource usage, but that's the purpose of
the operation). However, XSM doesn't see the value that's being set
here, so the net effect would be potential unbounded memory use.
XEN_DOMCTL_set_virq_handler:
This modifies a global array. While that is the purpose of the
operation, if multiple domains are granted permission they can badly
interfere with one another. Hence I'd appreciate a second opinion
here. [Andrew confirms that this being the nature of the operation,
it's fine to be removed from the list - will be done in a 2nd round.]
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Tim Deegan <tim@xen.org>
The way XEN_DOMCTL_set_cpuid got handled so far allowed for surprises
to the caller. With this set of operations
- set leaf A (using array index 0)
- set leaf B (using array index 1)
- clear leaf A (clearing array index 0)
- set leaf B (using array index 0)
- clear leaf B (clearing array index 0)
the entry for leaf B at array index 1 would still be in place, while
the caller would expect it to be cleared.
While looking at the use sites of d->arch.cpuid[] I also noticed that
the allocation of the array needlessly uses the zeroing form - the
relevant fields of the array elements get set in a loop immediately
following the allocation.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Tim Deegan <tim@xen.org>
Set bits in hypervisor CPUID leaf indicating that HW provides (and the
hypervisor enables) HW support for APIC and x2APIC virtualization.
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Reviewed-off-by: Jan Beulich <jbeulich@suse.com>
Add support for changing max number of hypervisor leaves from configuration
file.
This number can be specified using xl's standard 'cpuid' option. Only lowest
8 bits of leaf's 0x4000xx00 eax register are processed, all others are ignored.
The changes allow us to revert commit 80ecb40362
which is most likely no longer needed now anyway (Solaris bug that it addressed
has been fixed and backported to earlier releases) but leave possibility of
running unpatched version of Solaris by forcing number of leaves to 2 in the
configuration file.
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Instead leverage the NPF VM exit enforcement by marking just the top
level entries as needing recalculation of their type, building on the
respective range type change modifications.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Tim Deegan <tim@xen.org>
This builds on the fact that in order for no NPF VM exit to occur,
_PAGE_USER must always be set. I.e. by clearing the flag we can force a
VM exit allowing us to do similar lazy type changes as on EPT.
That way, the generic entry-wise code can go away, and we could remove
the range restriction in enforced on HVMOP_track_dirty_vram for XSA-27.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Tim Deegan <tim@xen.org>
This requires a new P2M backend hook and a little bit of extra care on
accounting in the generic function.
Note that even on leaf entries we must not immediately set the new
type (in an attempt to avoid the EPT_MISCONFIG VM exits), since the
global accounting in p2m_change_type_range() gets intentionally done
only after updating page tables (or else the update there would
conflict with the function's own use of p2m_is_logdirty_range()), and
the correct type can only be calculated with that in place.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Tim Deegan <tim@xen.org>
Instead leverage the EPT_MISCONFIG VM exit by marking just the top
level entries as needing recalculation of their type, propagating the
the recalculation state down as necessary such that the actual
recalculation gets done upon access.
For this to work, we have to
- restrict the types between which conversions can be done (right now
only the two types involved in log dirty tracking need to be taken
care of)
- remember the ranges that log dirty tracking was requested for as well
as whether global log dirty tracking is in effect
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Tim Deegan <tim@xen.org>
The function calls prepare_ring_for_helper() to acquire a mapping for the
given gmfn, then checks (under lock) to see if the ioreq page is already
set up but, if it is, the function then releases the in-use ioreq page
mapping on the error path rather than the one it just acquired. This patch
fixes this bug.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
CID 1150562
tmem_rwlock is unnecessary in tmem_relinquish_pages(), as
such lock is used as gate for hypercalls. However
tmem_relinquish_pages deals with pages that are no longer
owned by any domain - hence there is no need for tmem_rwlock.
Also the function is protected by the 'heap_lock' which
is the only calleer of this function.
This patch drops said lock.
Signed-off-by: Bob Liu <bob.liu@oracle.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
- drop unused variable "mfn"
- consistently do not use "else" when the prior "if" ends in "goto"
- use printk() referencing the target domain instead of gdprintk()
(which references the current domain) and slightly shorten message
- annotate -EINVAL results in paging/shared paths to actually need
switching to -EAGAIN (possible only when preemption logic got fixed
to use -ERESTART)
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Tim Deegan <tim@xen.org>
While generally such guest side changes ought to be followed by guest
initiated flushes, we're flushing the cache under similar conditions
elsewhere (e.g. when the guest sets CR0.CD), so let's do so here too.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Tim Deegan <tim@xen.org>
This was inadvertently left out of aa9114ed ("x86/EPT: force
re-evaluation of memory type as necessary"). Note that this
intentionally doesn't use memory_type_changed(): Changes to the pinned
ranges are independent of IOMMU presence, which that function uses to
determine whether to call the underlying p2m_memory_type_changed().
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Tim Deegan <tim@xen.org>
This wasn't done properly by 4d66f069 ("x86: fix pinned cache attribute
handling"): The passed in GFN shouldn't be assumed to be order aligned.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Tim Deegan <tim@xen.org>
With need_iommu() only ever true when iommu_enabled is also true, and
with the former getting set when a PCI device gets added to a guest,
the checks can be consolidated. The range set check are left in place
just in case raw MMIO or I/O port ranges get passed to a guest.
At once drop open-coding of cache_flush_permitted().
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Tim Deegan <tim@xen.org>
CNTKCTL_EL1 is used by the guest to control access to the timer from
userspace. It therefore needs to be save/restored by Xen as part of
the VCPU state.
By default Linux on ARM64 exposes the timer to userspace. Furthermore on
ARM64, Linux provides helpers in a VDSO (gettimeofday/__do_get_tspec)
that use the timer counter. Conversely, during CPU bring up, Xen will
set CNTKCTL_EL1 to 0 (i.e disallow timer access to the userspace). As
a result, currently, if dom0 has 1 VCPU which is migrated to another
PCPU, init might crash.
Alternatively, a guest (malicious or not) might decide to disable
access to the timer from userspace. If the register is not
save/restored, when a DOM0 VCPU runs again, a similar crash would
result.
Also, drop CNTKCTL_EL1 initialization in init_timer_interrupt. Xen
should let the guest deal with this register.
This is XSA-91 / CVE-2014-3125.
Reported-by: Chen Baozi <baozich@gmail.com>
Signed-off-by: Julien Grall <julien.grall@linaro.org>
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
To correctly migrate a PV guest, the toolstack must remove Xen mappings from
the guest pagetables. For 32bit PV guests, the pagetables cannot be walked
from the top so upon encountering an L2 table, the toolstack must decide
whether it contains Xen mappings or not, to avoid corrupting L2s without Xen
mappings.
The migration code performs this search efficiently by knowing that the Xen
mappings will start at a known L2e and point to a known mfn, which will be the
first mfn in the m2p table.
Unfortunately there are two m2p tables in use; the regular and the
compatibility one. The toolstack looks for the first mfn of its own m2p table
in the guest pagetables. This only works if the toolstack is the same bitness
as the 32bit domain being migrated, and leaves a problem for 64bit toolstacks
which will never be able to find its regular m2p in a compat guest.
It appears that this bug for 64bit toolstacks was discovered, but hacked
around in an unsafe manner. The code currently shoots any invalid L2es and
doesn't report a failure for L2 tables in a 32 bit guest, even after the guest
is paused. This means that non Xen entries which should fail the migration
don't, and the guest will resume on the far side with unexpectedly fewer
present pagetable entries.
This patch introduces XENMEM_machphys_compat_mfn_list which permits a 64bit
toolstack to access the compat m2p mfn list, for the purpose of correctly
identifying Xen entries in a 32bit guest.
It is worth noting for completeness that 64bit PV guests don't have any of
these games to play. The Xen mappings are present at a known location in all
L4 tables, so can be safely shot by 32 and 64bit toolstacks without looking at
where the mapping points to.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Half of __high_start is strictly for the BSP and will only be run once on
boot. To complement 'start_secondary', create 'start_bsp' and move it into
the init.text section.
The interrupt handler 'ignore_int' is patched into the BSPs IDT, but fully
replaced with real handlers early during boot. The BSPs IDT is used by APs
until midway through start_secondary, but after the real handlers have been
installed. Therefore, 'ignore_int' can move to init.text. Furthermore, its
strings can move to init.rodata.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Roger Pau Monne
Julien Grall
Jan Beulich
Boris Ostrovsky
Aravind Gopalakrishnan
Paul Durrant
Bob Liu
Andrew Cooper