HVMLoader is not relocatable in memory, and 32bit PIC code has a large
overhead. Override the compilers choice of pic/no-pic and force it to be
non-relocatable.
Bloat-o-meter reports a net:
add/remove: 0/0 grow/shrink: 3/107 up/down: 14/-3370 (-3356)
No functional change.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Setup proper dependencies with libacpi so we don't need to run "make
hvmloader" in the "all" target. ("build.o" new prerequisite isn't
exactly proper but a side effect of building the $(DSDT_FILES) is to
generate the "ssdt_*.h" needed by "build.o".)
Make use if "-iquote" instead of a plain "-I".
For "roms.inc" target, use "$(SHELL)" instead of plain "sh". And use
full path to "mkhex" instead of a relative one. Lastly, add "-f" flag
to "mv" to avoid a prompt in case the target already exist and we
don't have write permission.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Luca Fancellu <luca.fancellu@arm.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
hvmloader's last subdir have been removed in 73b72736e6 ("acpi: Move
ACPI code to tools/libacpi"), so there is no need to use "subdirs-*"
target anymore.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
properly and seems to get stuck while trying to generate and load the
ACPI tables. This is caused by the layout of the binary when linked
with LLVM LD.
LLVM LD has a different default linker script that GNU LD, and the
resulting hvmloader binary is slightly different:
LLVM LD:
Program Headers:
Type Offset VirtAddr PhysAddr FileSiz MemSiz Flg Align
PHDR 0x000034 0x000ff034 0x000ff034 0x00060 0x00060 R 0x4
LOAD 0x000000 0x000ff000 0x000ff000 0x38000 0x38000 RWE 0x1000
GNU_STACK 0x000000 0x00000000 0x00000000 0x00000 0x00000 RW 0
GNU LD:
Program Headers:
Type Offset VirtAddr PhysAddr FileSiz MemSiz Flg Align
LOAD 0x000080 0x00100000 0x00100000 0x36308 0x3fd74 RWE 0x10
GNU_STACK 0x000000 0x00000000 0x00000000 0x00000 0x00000 RW 0x4
Note that in the LLVM LD case (as with GNU LD) the .text section does
indeed have the address set to 0x100000 as requested on the command
line:
[ 1] .text PROGBITS 00100000 001000 00dd10 00 AX 0 0 16
There's however the PHDR which is not present when using GNU LD.
Fix this by using a very simple linker script that generates the same
binary regardless of whether LLVM or GNU LD is used. By using a linker
script the usage of -Ttext can also be avoided by placing the desired
.text load address directly in the linker script.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Do not embed IPXE into Rombios anymore. Instead, it is loaded by the
toolstack from a file as a separate module.
Ability to let user specify an IPXE blob will come later.
No user visible change.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
And switch hvmloader/Makefile to use that binary. This will help later
when we change hvmloader to pick a user provided binary.
No functional change.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
It makes more sense to put a tool to be used by other subsystems
to be in 'tools/misc' along 'mkrpm','mkdeb', etc.
The patch titled "xen/livepatch/x86/arm32: Force .livepatch.depends
section to be uint32_t aligned" uses mkhex.
Acked-by: Wei Liu <wei.liu2@citrix.com>
Suggested-by: Julien Grall <julien.grall@arm.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
DEPS_INCLUDE is currently the same as DEPS, so no functional change.
This patch is the result of this perl rune:
git-grep -l 'include.*DEPS' | xargs perl -i -pe 'next unless m/^-?include/; s/\bDEPS\b/DEPS_INCLUDE/'
I have verified that I haven't missed anything, with this rune:
git-grep '\bDEPS\b'
Reported-by: Jan Beulich <JBeulich@suse.com>
CC: Wei Liu <wei.liu2@citrix.com>
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
DEPS_RM is currently the same as DEPS, so no functional change.
This patch is the result of two perl runes:
git-grep -l 'rm.*DEPS' | xargs perl -i~ -pe 'next unless m/^\t+rm\b/; s/\bDEPS\b/DEPS_RM/;'
git-grep -l 'RM.*DEPS' | xargs perl -i~ -pe 'next unless m/^\t+\$\(RM\)/; s/\bDEPS\b/DEPS_RM/;'
And editing tools/xenstat/libxenstat/Makefile by hand.
I verified that I didn't miss anything with this rune:
git-grep '\bDEPS\b' | grep -v include |less
Reported-by: Jan Beulich <JBeulich@suse.com>
CC: Wei Liu <wei.liu2@citrix.com>
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
There is no reason to build, for example, dsdt_pvh.asl for hvmloader. We
pass which DSDTs to build via DSDT_FILES parameter.
If DSDT_FILES is empty all DSDTs for a particular architecture will be built.
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Release-acked-by: Wei Liu <wei.liu2@citrix.com>
We now have permission from Lenovo to relicense commit 801d469ad8
("[HVM] ACPI support patch 3 of 4: ACPI _PRT table") to LGPLv2.1
This essentially means reverting commits c3397311a6 ("acpi: Prevent
GPL-only code from seeping into non-GPL binaries") and 26c4f0b8a4
("tools/libacpi: fix sed usage")
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Acked-by: Ken Lancaster <klancaster@lenovo.com>
Reviewed-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Release-acked-by: Wei Liu <wei.liu2@citrix.com>
In prepearation to moving acpi sources into generally available
libacpi:
1. Pass IOAPIC/LAPIC/PCI mask values via struct acpi_config
2. Modify include files search paths to point to acpi directory
3. Macro-ise include file for build.c that defines various
utilities used by that file. Users of libacpi will be expected
to define this macro when compiling build.c
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
ACPI sources will be available to various component which will build
them according to their own rules. ACPI's Makefile will only generate
necessary source files.
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Some code (specifically, introduced by commit 801d469ad ("[HVM] ACPI
support patch 3 of 4: ACPI _PRT table.")) has only been licensed under
GPLv2. We want to prevent this code from showing up in non-GPL
binaries which might become possible after we make ACPI builder code
available to users other than hvmloader.
There are two pieces that we need to be careful about:
(1) A small chunk of code in dsdt.asl that implements _PIC method
(2) A chunk of ASL generator in mk_dsdt.c that describes with PCI
interrupt routing.
This code will now be generated by a GPL-only script which will be
invoked only when ACPI builder's Makefile is called with GPL variable
set.
We also strip license header from generated ASL files to prevent
inadverent use of those files with incorrect license.
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Reviewed-by: Wei Liu <wei.liu2@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
... and do not include the SeaBIOS ROM into hvmloader anymore.
This also fix the dependency on roms.inc, hvmloader.o does not include it.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Currently __XEN_TOOLS__ is defined in the global CFLAGS used for tools
builds, exposing them all to the various unstable hypercall interfaces.
However there are places where we do not want this (in particular all
the stable libraries now under tools/libs), and there is a risk of
such uses slipping in unnoticed (currently there are none, but I
tripped over the mixed nature of the HVMOPs just now in some new code
I was putting together).
Instead only define __XEN_TOOLS__ for things which explicitly want the
unstable APIs. The vast majority of these are consumers of libxenctrl,
which have opted into unstable interfaces by using libxenctrl already,
so adding -D__XEN_TOOLS__ to CFLAGS_libxenctrl covers these without
needing to patch the dozen or so tools manually.
The libxc build itself, which doesn't use CFLAGS_libxenctrl, now needs
the define too. As does gdbsx's own low level hypercall binding
library xg.
hvmloader no longer needs to undefine the symbol.
The ocaml evtchn bindings don't actually need sysctl.h and therefore
don't actually need __XEN_TOOLS__ either.
qemu-xen-traditional doesn't use CFLAGS_libxenctrl and so we pass the
define there (via --extra-cflags) too.
Having removed __XEN_TOOLS__ replace it with
__XEN_INTERFACE_VERSION__=__XEN_LATEST_INTERFACE_VERSION__ so that in
tree code is always using the latest APIs.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
As recommended in http://www.gnu.org/licenses/gpl-howto.en.html.
This is the result of:
$ git grep -El Mass\|Temple\|Franklin | xargs ./fsf.pl
Where fsf.pl is:
#!/usr/bin/perl -w -pi.bak -0777
my $repl = 'If not, see <http://www.gnu.org/licenses/>.';
my $br = qr/(?:\s*\n\s*(?:[\*\#]|\/\/|\.\\" )?\s*|\s+)/;
my $inwt = qr/[Ii]f${br}not,${br}write${br}(?:to${br})?the${br}Free${br}Software${br}Foundation,(?:${br}Inc\.,)?/;
my $mass = qr/675${br}Mass${br}Ave,?${br}Cambridge,?${br}MA${br}02139,?${br}USA,?\.?/;
my $franklin = qr/51${br}Franklin${br}St(?:reet)?(?:,${br}| - )Fifth${br}Floor,?${br}Boston,?${br}MA,?${br}02110-1301,?${br}USA,?\.?/;
my $temple = qr/59${br}Temple${br}Place(?:,${br}| - )Suite${br}330,?${br}Boston,?${br}MA,?${br}021110?-1307,?${br}USA,?\.?/;
s|$inwt$br$mass|$repl|m;
s|$inwt$br$franklin|$repl|m;
s|$inwt$br$temple|$repl|m;
The only remaining mentions of these addresses are in COPYING files which I
haven't touched.
Some of the changed files are imports from elsewhere, however
filtering them out is tricky, I think it is tolerable to have these
files be modified here and then perhaps reverted on the next sync,
since it's only 1-2 lines and obvious what is going on.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
This being an in-guest component, it shouldn't get to see (and even
less so use) tools-only public interfaces.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Hvmloader issues XENMEM_get_vnumainfo hypercall and stores the
information retrieved in scratch space for later use.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
The original rule to target "distclean" in tools/Rules.mk was in effect
"make clean". It should be "make distclean".
However not all Makefiles in subdirectories have distclean target
defined. So this patch also adds a bunch of distclean targets to various
Makefiles. They only depend on clean target and don't have any actions
in most cases.
With the patch applied, following command outputs 0 results:
find tools -name 'Makefile*' -exec grep -L 'distclean' {} \+ \
| grep -v ocaml | grep -v libfsimage
Ocaml and libfsimage are known to have distclean defined in a dedicated
rules file.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Debian Jessie at least contains an ovmf package that includes
/usr/share/ovmf/OVMF.fd. It's also possible that user may want to supply
his/her own ovmf binary.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
for consistency with other foo-dir e.g. qemu, seabios.
Remove obsolete ovmf-find target.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
If this option is given don't bother building seabios ourselves.
Likely to be handy for distros who have an existing seabios
package which they want to reuse.
Signed-off-by: Fabio Fantoni <fabio.fantoni@m2r.biz>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
- Remove the 15cpus hack from ovmf because it should be unnecessary on
nowadays windows/EFI supported.
Signed-off-by: Attilio Rao <attilio.rao@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Keir Fraser <keir@xen.org>
...when specified in the guest configuration file.
This work is somewhat based on Bei Guan effort during the SoC 2011 and
relies on upstream edk2/ovmf Tianocore ROM to be built separately and
manually copied as:
Build/OvmfX64/DEBUG_GCC44/FV/OVMF.fd ->
tools/firmware/ovmf/ovmf-x64.bin
Build/OvmfIa32/DEBUG_GCC44/FV/OVMF.fd ->
toolf/firmware/ovmf/ovmf-ia32.bin
A way to integrate OVMF build directly into XEN has still be discussed
on the mailing list appropriately.
Signed-off-by: Attilio Rao <attilio.rao@citrix.com>
Disable CONFIG_OVMF by default as ovmf is not integrated into the
build.
Signed-off-by: Keir Fraser <keir@xen.org>
Committed-by: Keir Fraser <keir@xen.org>
This patch introduces configuration options allowing to built either a
rombios only or a seabios only hvmloader.
Building option ROMs like vgabios or etherboot is only enabled for a
rombios hvmloader, since SeaBIOS takes care or extracting option ROMs
itself from the PCI devices (these option ROMs are provided by the
device model and do not need to be built in hvmloader).
The Makefile in tools/firmware/ now only checks for bcc if rombios is
enabled.
These two configuration options are left on by default to remain
compatible.
Signed-off-by: Julian Pidancet <julian.pidancet@gmail.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Make load_rom field in struct bios_config an optionnal callback rather
than a boolean value. It allow BIOS specific code to implement it's
own option ROM loading methods.
Facilities to scan PCI devices, extract an deploy ROMs are moved into
a separate file that can be compiled optionnaly.
Signed-off-by: Julian Pidancet <julian.pidancet@gmail.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
To remain consistent with how other ROMs are built into hvmloader,
call mkhex on etherboot ROMs from the hvmloader directory, instead of
the etherboot directory. In other words, eb-roms.h is not used any
more.
Introduce ETHERBOOT_NICS config option to choose which ROMs should be
built (kept rtl8139 and 8086100e per default as before).
Signed-off-by: Julian Pidancet <julian.pidancet@gmail.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
32bitbios_support.c only contains code specific to rombios, and should
not be built-in when building hvmloader for SeaBIOS only (as for
rombios.c).
Signed-off-by: Julian Pidancet <julian.pidancet@gmail.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
These have broken the build and it seems to be difficult to fix. So
we will revert the whole lot for now, and await corrected patch(es).
Revert "fix the build when CONFIG_QEMU is specified by the user"
Revert "tools: fix permissions of git-checkout.sh"
Revert "scripts/git-checkout.sh: Is not bash specific. Invoke with /bin/sh."
Revert "Clone and build Seabios by default"
Revert "Clone and build upstream Qemu by default"
Revert "Rename ioemu-dir as qemu-xen-traditional-dir"
Revert "Move the ioemu-dir-find shell script to an external file"
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
The SeaBIOS integration here is only semi-complete and is targetted at
developers and very early adopters who can be expected to cope with
some rough edges. In particular the user must clone, patch as
necessary and compile SeaBIOS themselves since this patchset does not
cover any of that (in the same way we currently do not integrate
upstream qemu clone+build). Include a big comment to that effect next
to the Config.mk option.
Many of the bios_config callback functions are not yet used by
SeaBIOS.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson.citrix.com>
Committed-by: Ian Jackson <ian.jackson.citrix.com>
Also, generate roms.inc file in a scratch location and then move in
place. This is more reliable if make is terminated at an arbitrary
point.
Signed-off-by: Keir Fraser <keir@xen.org>
For now abstract away the actual ROM bits themselves and the various
load addresses.
Create a rombios.c to contain the ROMBIOS specific parts. ROMBIOS is
still statically selected for the time being.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Keir Fraser <keir@xen.org>
Add an option to use debug Cirrus video BIOS, simply as a convenience.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Keir Fraser <keir@xen.org>
Pass the table address as a paramter to the build function and cause
it to return the number of entries. Pass both base and offset as
parameters to the dump function.
This adds a duplicated e820.h header to ROMBIOS. Since the e820 data
structure is well defined by existing BIOS implementations I think
this is OK and simplifies the cross talk between hvmloader and
ROMBIOS.
Reduces the cross talk between ROMBIOS and hvmloader.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Keir Fraser <keir@xen.org>
Andrew Cooper
Anthony PERARD
Roger Pau Monné
Wei Liu
Konrad Rzeszutek Wilk
Ian Jackson
Jan Beulich
Boris Ostrovsky
Ian Campbell
Wen Congyang
Olaf Hering
David Vrabel
Fabio Fantoni
Attilio Rao
Julian Pidancet
Paul Durrant
Keir Fraser