Avoid generating *.map files or running headers.chk when all we need
is the libxen*.a.
Also, allow force make to check again if libxen*.a needs rebuilt by
adding a '.PHONY' prerequisite.
Also, remove DESTDIR= as we don't do installation in this target, so
the value of DESTDIR doesn't matter.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Today the build will fail if --disable-pv-grub as a parameter of
configure, as the main Makefile will unconditionally try to build a
32-bit pv-grub stubdom.
Fix that by introducing a pv-grub-if-enabled target in
stubdom/Makefile taking care of this situation.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: Ian Jackson <iwj@xenproject.org>
Add two patches:
vtpm-microsecond-duration.patch fixes the units for timeouts and command
durations.
vtpm-command-duration.patch increases the timeout linux uses to allow
commands to succeed.
Linux works around low timeouts, but not low durations. The second
patch allows commands to complete that often timeout with the lower
command durations.
Signed-off-by: Jason Andryuk <jandryuk@gmail.com>
Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: Daniel P. Smith <dpsmith@apertussolutions.com>
vtpmmgr was changed to print size_t with the %z modifier, but newlib
isn't compiled with %z support. So you get output like:
root seal: zu; sector of 13: zu
root: zu v=zu
itree: 36; sector of 112: zu
group: zu v=zu id=zu md=zu
group seal: zu; 5 in parent: zu; sector of 13: zu
vtpm: zu+zu; sector of 48: zu
Enable the C99 formats in newlib so vtpmmgr prints the numeric values.
Fixes: 9379af08cc ("stubdom: vtpmmgr: Correctly format size_t with %z when printing.")
Signed-off-by: Jason Andryuk <jandryuk@gmail.com>
Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: Daniel P. Smith <dpsmith@apertussolutions.com>
Add a PVH xenstore stubdom in order to support a Xenstore stubdom on
a hypervisor built without PV-support.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Acked-by: Wei Liu <wl@xen.org>
tools/libxc now contains libxenguest only. Move it to tools/libs/guest.
When generating the pkg-config file for libxenguest a filter is now
required for replacing "xenctrl" by "xencontrol" in the
"Requires.private:" entry. Add this filter to tools/libs/libs.mk.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org> (stubdom parts)
Today tools/libxc needs to be built after tools/libs as libxenctrl is
depending on some libraries in tools/libs. This in turn blocks moving
other libraries depending on libxenctrl below tools/libs.
So carve out libxenctrl from tools/libxc and move it into
tools/libs/ctrl.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org> (stubdom parts)
Acked-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com> (python parts)
Acked-by: Wei Liu <wl@xen.org>
For each library built two variants of pkg-config files are created
from a per-library template: an "official" one for installation on
the user's system, and one used for building internal tools, like e.g.
qemu.
Instead of the template which is looking very similar for all libraries
generate the pkg-config files directly from make variables.
This will reduce the need to specify some pkg-config file entries in
the templates, as the contents can easily be generated from available
data (e.g. "Version:" and "Requires.private:" entries).
Especially the variant used for building internal tools needs to gain
additional runtime link parameters for the internally used libraries,
as otherwise those won't be found by the users (e.g. qemu).
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Wei Liu <wl@xen.org>
make 3.81 doesn't support multiline variables defined with
define var =
...
endef
Dropping the "=" in the first line will fix the issue.
Fixes: ded08cdfa7 ("tools: generate most contents of library make variables")
Fixes: ddb2934a91 ("stubdom: add correct dependencies for Xen libraries")
Reported-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Ian Jackson <ian.jackson@eu.citrix.com>
The pattern for building a Xen library with sources under tools/libs
is always the same. Simplify stubdom/Makefile by defining a callable
make program for those libraries.
Even if not needed right now add the possibility for defining
additional dependencies for a library.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
The stubdom Makefile is missing several dependencies between Xen
libraries. Add them.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
This prevents syntax highlighting from believing the rest of the file is a
string.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Julien Grall <jgrall@amazon.com>
newlib has a hardcoded dependency on texinfo, which in turn means that
Xen has this dependency when building the stub domains. The files that
newlib generates are never used or exposed by the Xen build system so
its really a wasted effort to require a heavy (size wise) package for
the build of something that's thrown away. Instead of adding it as a
requirement this patches out the code path in newlib that uses it so
that the files are never generated.
Signed-off-by: Doug Goldstein <cardoe@cardoe.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
gcc8 spotted this error:
error: 'memcmp' reading 20 bytes from a region of size 8 [-Werror=stringop-overflow=]
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Remove the executable bits of vtpm files by using _DATA instead of _PROG.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Wei Liu <wei.liu2@citrix.com>
We need to do this before we start to make the other libraries call
into xentoolcore, or we break the stubdom build.
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Running "make uninstall" does not remove all installed files, a
situation which might cause link related issues if xen is re-installed
in a different location.
In order to make uninstall correctly remove the files it is best
the process should be done recursively by mirroring each "install"
target with an "uninstall" who removes the installed files.
An exception to this rule is uninstalling the files produced by
"qemu-xen-dir-remote" and "qemu-xen-traditional-dir", which are external
to the project. These projects do not implement an "uninstall" target so
the files have to be removed manually.
Signed-off-by: Petre Pircalabu <ppircalabu@bitdefender.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
GCC-7 have -Wimplicit-fallthrough enabled with -Wextra. Add appropriate
comment which both mute the warning and improve readibility.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Build can fail if stubdom build is run before tools build because:
1. tools/include build uses relative path and depends on XEN_OS
2. stubdom needs tools/include to be built, at which time XEN_OS is
mini-os and corresponding symlinks are created
3. libraries inside tools needs tools/include to be built, at which
time XEN_OS is the host os name, but symlinks won't be created
because they are already there
4. libraries get the wrong headers and fail to build
Since both tools and stubdom build need the public headers, we build
tools/include before stubdom and tools. Remove runes in stubdom and
tools to avoid building tools/include more than once.
Provide a new dist target for tools/include. Hook up the install,
clean, dist and distclean targets for tools/include.
The new arrangement ensures tools build gets the correct headers
because XEN_OS is set to host os when building tools/include. As for
stubdom, it explicitly links to the mini-os directory without relying
on XEN_OS so it should be fine.
Reported-by: Steven Haigh <netwiz@crc.id.au>
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Tested-by: Steven Haigh <netwiz@crc.id.au>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Release-acked-by: Julien Grall <julien.grall@arm.com>
Acked-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Instead of setting the PKG_CONFIG_DIR make variable in each library
Makefile do it in tools/Makefile and stubdom/Makefile globally.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
When configuring the build of qemu the configure script is building
various test programs to determine the exact version of libxencontrol.
Instead of a try and error approach needing updates for nearly each
new version of Xen just provide xencontrol.pc to be used via
pkg-config.
In the end we need two different variants of that file: one for the
target system where eventually someone wants to build qemu, and one
for the local system to be used for building qemu as part of the Xen
build process.
The local variant is created in a dedicated directory in order to be
able to collect more pkg-config files used for building tools there.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
The new xendevicemodel library is intended to be used by all Xen device
models such that the only hypercall that use will be the dm_op hypercall
added by commit 524a98c2.
This patch adds the boilerplate for the new library, with only open() and
close() entry points, and calls to those from libxenctrl in preparation
for the compat layer added by a subsequent patch.
[ Also: update MINIOS_UPSTREAM_REVISION and QEMU_TRADITIONAL_REVISION
to the commits with the corresponding changes to those other trees
- Ian Jackson ]
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Acked-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Cc: Wei Liu <wei.liu2@citrix.com>
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Several stubdom libraries are being rebuilt each time a top level make
is called as they depend on stubdom/ioemu/linkfarm.stamp which is
depending on tools/qemu-xen-traditional-dir. Unfortunately this
directory is modified by each "make tools" call.
This can be avoided by writing stubdom/ioemu/linkfarm.stamp only if
a source file beneath tools/qemu-xen-traditional-dir has been added
or removed.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
When building stubdoms EXTRA_CFLAGS_XEN_TOOLS and
EXTRA_CFLAGS_QEMU_TRADITIONAL should be cleared as they might contain
flags not suitable for all stubdom builds (e.g. "-m64" often to be
found in $RPM_OPT_FLAGS will break building 32 bit stubdoms).
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
The stubdom Makefile is setting up links for various libraries. This
is done only once when qemu links are created and each library's links
are updated/created only if the link for the Makefile of the library
isn't already existing. In case a source is added to one library after
doing the first make of stubdom the new source won't be linked by a
new call of make.
Instead of testing the existence of the Makefile link use a make
dependency which will catch changes of the linked Makefile, too.
At the same time don't repeat the same link pattern 7 times but use a
make macro to do the linking.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
[ wei: move "touch $@" to correct location in do_links ]
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
The debug option in Config.mk affects hypervisor, tools and stubdom by
appending different flags to CFLAGS. Mini-os under extra is not
affected because it already has its own build system when it is
separated from xen.git.
It is undesirable because now hypervisor build is affected by both
Kconfig and debug.
Disentangle the semantics of debug by pushing relevant options to
individual sub-systems.
For hypervisor, the flags previously added by debug option is now
controlled by CONFIG_DEBUG.
For tools, flags are moved from config/*.mk into tools/Rules.mk.
For stubdom, because it unilaterally sets debug=y before including
top-level Config.mk, we only need to move the debug build set of flags
into stubdom Makefile.
Specifically there are some considerations on what flags are picked:
1. we don't need -fno-optimize-sibling-calls anymore because gcc doc
indicates that it is not enabled for -O1, which we already set in the
debug build.
2. for tools we use -O0 -g3 in Rules.mk because they already take
precedence over the flags set in config/*.mk.
3. for hypervisor we don't add -fno-omit-frame-pointer to debug build
because that's controlled by CONFIG_FRAME_POINTER.
This patch doesn't intend to tune those flags, but to provide identical
set of effective flags as before. The debug option in Config.mk will
only affect tools components after this patch is applied.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Release-acked-by: Wei Liu <wei.liu2@citrix.com>
stubdom-vtpm needs gmp and expects it under
stubdom/cross-root-x86_64/x86_64-xen-elf/lib while gmp seems to install
it under stubdom/cross-root-x86_64/x86_64-xen-elf/lib64 at least in an
openSUSE environment.
Modify gmp configure parameters to explicitly specify --libdir.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Release-acked-by: Wei Liu <wei.liu2@citrix.com>
Append --build and --host flags to GMP's configure script so that it
knows it is being cross-compiled.
This should fix the issue that GMP doesn't compile with gcc 6, because
configure script won't try to test the host environment anymore.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Release-acked-by: Wei Liu <wei.liu2@citrix.com>
make distclean tries to remove stubdom/gmp-4.3.2.tar.gz, while the
downloaded file is stubdom/gmp-4.3.2.tar.bz2
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Release-acked-by: Wei Liu <wei.liu2@citrix.com>
Mini-OS apps need to be compiled with the appropriate config settings
of Mini-OS, as there are various dependencies on those settings in
header files included by the apps.
Enhance stubdom Makefile to set the appropriate CPPFLAGS when calling
the apps' make.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
[ wei: fold in change to Config.mk to update mini-os commit ]
Previously in the three problematic libraries all public headers were
linked to source code directory. We should have created an include
directory for each library and linked public headers there.
Note that there was no breakage for those three libraries before this
patch. This patch merely changes the location headers are linked to so
that all libraries follow the same pattern.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
libxenforeignmemory will provide a stable API and ABI for mapping
foreign domain memory (subject to appropriate privileges).
The new library exposes an interface equivalent to
xc_map_foreign_memory_bulk, which all the other
xc_map_foreign_memory_* functions (which remain in libxc) are
implemented in terms of.
Upon request (via #define XC_WANT_COMPAT_MAP_FOREIGN_API) libxenctrl
will provide a compat API for the old names. This is used by qemu-xen
and qemu-trad as well as various in tree things (which required
de-dupping various #includes in some too to get the #define before the
first).
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
[ ijc -- updated MINIOS_UPSTREAM_REVISION and QEMU_TRADITIONAL_REVISION ]
libxencall will provide a stable API and ABI for calling hypercalls
(although those hypercalls themselves may not have a stable API). As
well as the hypercall buffer infrastructure needed in order to safely
provide pointer arguments to hypercalls.
libxenctrl encapsulates a instance of this interface, so users of that
library are not currently subjected to any actual changes. However all
hypercalls made internally by libxc now use the correct interface. It
is expected that most users of this library will be other libraries
providing a higher level interface, rather than applications directly.
Only the basic functionality to allocate hypercall safe memory is
moved, the type safe stuff and bounce buffers remain in libxc.
Note that the functionality to map foreign pages using privcmd is not
yet moved, meaning that an xc_interface will now contain two open
privcmd file descriptors. Foreign memory mapping is logically separate
functionality and will be moved into its own library.
The new library uses a version script to ensure that only expected
symbols are exported and to version them such that ABI guarantees can
be kept in the future.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
[ ijc -- updated MINIOS_UPSTREAM_REVISION and QEMU_TRADITIONAL_REVISION ]
libxengnttab will provide a stable API and ABI for accessing the
grant table devices.
The functions are moved into the xengnt{tab,shr} namespace to make a
clean break from libxc and avoid ambiguity regarding which interfaces
are stable.
All in-tree users are updated to use the new names.
Upon request (via #define XC_WANT_COMPAT_GNTTAB_API) libxenctrl will
provide a compat API for the old names. This is used by qemu-xen for
the time being. qemu-xen-traditional is updated in lockstep.
This leaves a few grant table related functions which go via privcmd
(GNTTABOP) rather than ioctls on the /dev/xen/gnt* devices in
libxenctrl. Specifically:
- xc_gnttab_get_version
- xc_gnttab_map_table_v1
- xc_gnttab_map_table_v2
- xc_gnttab_op
These functions do not appear to be needed by qemu-dm, qemu-pv
(provision of device model to HVM guests and PV backends respectively)
or by libvchan suggesting they are not needed by non-toolstack uses of
event channels.
The new library uses a version script to ensure that only expected
symbols are exported and to version them such that ABI guarantees can
be kept in the future.
After this change libxenvchan no longer needs to link against
libxenctrl. It still needs xenctrl.h in one file for xen_mb and
friends.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
[ ijc -- updated MINIOS_UPSTREAM_REVISION and QEMU_TRADITIONAL_REVISION ]
libxenevtchn will provide a stable API and ABI for accessing the
evtchn device.
The functions are moved into the xenevtchn namespace to make a clean
break from libxc and avoid ambiguity regarding which interfaces are
stable.
All in-tree users are updated to use the new names.
Upon request (via #define XC_WANT_COMPAT_EVTCHN_API) libxenctrl will
provide a compat API for the old names. This is used by qemu-xen for
the time being. qemu-xen-traditional is updated in lockstep.
This leaves a few event channel related functions which go via privcmd
(EVTCHNOP) rather than ioctls on the /dev/xen/evtchn device in
libxenctrl. Specifically:
- xc_evtchn_alloc_unbound
- xc_evtchn_reset
- xc_evtchn_status
Note that xc_evtchn_alloc_unbound's functionality is also provided by
xenevtchn_bind_unbound_port() (née xc_evtchn_bind_unbound_port) and is
probably redundant.
These functions do not appear to be needed by qemu-dm, qemu-pv
(provision of device model to HVM guests and PV backends respectively)
or by libvchan suggesting they are not needed by non-toolstack uses of
event channels. QEMU does use these in hw/xenpv/xen_domainbuild.c but
that is a "toolstack use".
The new library uses a version script to ensure that only expected
symbols are exported and to version them such that ABI guarantees can
be kept in the future.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
[ ijc -- updated MINIOS_UPSTREAM_REVISION and QEMU_TRADITIONAL_REVISION ]
In attempting to disaggregate libxenctrl I found that many of the
pieces were going to want access to this library, so split it out (as
it probably should always have been).
Various build adjustments are needed. In particular things which use
xtl_* themselves now need to explicity link against the library.
This has a nice side effect which is that users of libxl no longer
need to link against libxenctrl just to create a logger, which was
counter to the principal that applications using libxl shouldn't be
required to look behind the curtain. This means that xl no longer
links against libxenctrl.
The new library uses a version script to ensure that only expected
symbols are exported and to version them such that ABI guarantees can
be kept in the future.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
[ ijc -- dropped QEMU_TRADITIONAL_REVISION update, this had since
progressed to 569eac99e8dd which is after 9fad9ed28583, the
commit needed here. ]
... rather than in the libxc rule.
This puts all the header dependencies in one place and will allow us
to avoid races when more libraries which need these headers are
introduced. I observed issues with the xen-foreign/tmp.size file
getting deleted in parallel with another process trying to use it.
The mini-os links are already created in the
mk-headers-$(XEN_TARGET_ARCH) target so the other places which do so
are redundant, in the case of polarssl and vtpmmgr indirectly through
their eventual dependency on newlib which in turn depends on
mk-headers-$(XEN_TARGET_ARCH).
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Cc: samuel.thibault@ens-lyon.org
This reverts commit c7d3afbb44 which
broke the libvirt build, since libvirt uses xtl_* and hence needs
updating to link against the new library when necessary.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
In attempting to disaggregate libxenctrl I found that many of the
pieces were going to want access to this library, so split it out (as
it probably should always have been).
Various build adjustments are needed. In particular things which use
xtl_* themselves now need to explicity link against the library.
This has a nice side effect which is that users of libxl no longer
need to link against libxenctrl just to create a logger, which was
counter to the principal that applications using libxl shouldn't be
required to look behind the curtain. This means that xl no longer
links against libxenctrl.
The new library uses a version script to ensure that only expected
symbols are exported and to version them such that ABI guarantees can
be kept in the future.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
[ ijc -- Update QEMU_TRADITIONAL_REVISION and MINIOS_UPSTREAM_REVISION ]
Currently, the flags are not interpreted by vTPM. They are just
packed and sent to vtpmmgr.
Signed-off-by: Emil Condrea <emilcondrea@gmail.com>
Acked-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Clean and distclean targets need not depend on existence of the mini-os
tree. Don't check for mini-os and don't try to blindly include
mini-os's Config.mk when doing clean and distclean.
Note that one subtle issue is that $(XEN_ROOT)/Config.mk tries to
include $(XEN_ROOT)/config/$(XEN_OS).mk. In stubdom's case XEN_OS is
"MiniOS". Then $(XEN_ROOT)/config/MiniOS.mk tries to include mini-os's
Config.mk.
Since clean and distclean don't enforce existence of mini-os tree, don't
include $(XEN_ROOT)/Config.mk to avoid getting error due to the
aforementioned issue.
Reported-by: Sander Eikelenboom <linux@eikelenboom.it>
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Cc: Samuel Thibault <samuel.thibault@ens-lyon.org>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Provide mini-os url and revision in Config.mk
Make stubdom targets depend on mini-os-dir target. Make
subtree-force-update{,-all} depend on mini-os-dir-force-update.
Also make mktarball script generate mini-os archive.
Original mini-os directory is renamed to mini-os-intree to help reduce
patch length. That directory will be deleted in a separate patch.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
---
Changes in v3:
1. Put mini-os targets in main Makefile.
2. Stubdom clean and distclean don't depend on mini-os-dir.
Changes in v2:
1. Use hash in Config.mk.
In commit 8962a8f951 CONFIG_QEMU was
replaced by QEMU_TRADITIONAL_LOC. However stubdom/Makefile still uses
CONFIG_QEMU so building stubdom is likely to fail. This patch
replaces CONFIG_QEMU with QEMU_TRADITIONAL_LOC in stubdom/Makefile as
well.
Signed-off-by: Michael Young <m.a.young@durham.ac.uk>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Release-Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Anthony PERARD
Juergen Gross
Jason Andryuk
Olaf Hering
Andrew Cooper
Doug Goldstein
Ian Jackson
Petre Pircalabu
Marek Marczykowski-Górecki
Wei Liu
Paul Durrant
Ian Campbell
Emil Condrea
M A Young