Such macro just clamps the passed version to fit in the designated
bits of the domctl field. The main purpose is to make it clearer in
the code when max grant version is being set in the grant_opts field.
Existing users that where setting the version in the grant_opts field
are switched to use the macro.
No functional change intended.
Requested-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Bertrand Marquis <bertrand.marquis@arm.com>
Acked-by: Julien Grall <jgrall@amazon.com>
Reviewed-by: Ian Jackson <iwj@xenproject.org>
Release-Acked-by: Ian Jackson <iwj@xenproject.org>
Introduce a new domain create field so that toolstack can specify the
maximum grant table version usable by the domain. This is plumbed into
xl and settable by the user as max_grant_version.
Previously this was only settable on a per host basis using the
gnttab command line option.
Note the version is specified using 4 bits, which leaves room to
specify up to grant table version 15. Given that we only have 2 grant
table versions right now, and a new version is unlikely in the near
future using 4 bits seems more than enough.
xenstored stubdomains are limited to grant table v1 because the
current MiniOS code used to build them only has support for grants v1.
There are existing limits set for xenstored stubdomains at creation
time that already match the defaults in MiniOS.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Christian Lindig <christian.lindig@citrix.com>
Reviewed-by: Ian Jackson <iwj@xenproject.org>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Release-Acked-by: Ian Jackson <iwj@xenproject.org>
In order to let the toolstack be able to set the gnttab version on a
per-domain basis, it needs to know which ABIs Xen supports. Introduce
XEN_SYSCTL_PHYSCAP_gnttab_v{1,2} for the purpose, and plumb in down into
userspace.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Christian Lindig <christian.lindig@citrix.com>
Reviewed-by: Ian Jackson <iwj@xenproject.org>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Releae-Acked-by: Ian Jackson <iwj@xenproject.org>
This reverts commit 2075b410ee.
During the discussion [1] that took place after
the patch was merged it was agreed that it should
be reverted to avoid introducing a bad interface.
Furthermore, the patch rejected usage of flag
XEN_DOMCTL_CDF_vpci for x86 which is not true
as it should be set for dom0 PVH.
Due to XEN_DOMCTL_CDF_vpmu being introduced after
XEN_DOMCTL_CDF_vpci, modify its bit position
from 8 to 7.
[1] https://marc.info/?t=163354215300039&r=1&w=2
Signed-off-by: Michal Orzel <michal.orzel@arm.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Christian Lindig <christian.lindig@citrix.com<mailto:christian.lindig@citrix.com>>
Acked-by: Julien Grall <jgrall@amazon.com>
Reviewed-by: Bertrand Marquis <bertrand.marquis@arm.com>
Add parameter vpmu to xl domain configuration syntax
to enable the access to PMU registers by disabling
the PMU traps(currently only for ARM).
The current status is that the PMU registers are not
virtualized and the physical registers are directly
accessible when this parameter is enabled. There is no
interrupt support and Xen will not save/restore the
register values on context switches.
According to Arm Arm, section D7.1:
"The Performance Monitors Extension is common
to AArch64 operation and AArch32 operation."
That means we have an ensurance that if PMU is
present in one exception state, it must also be
present in the other.
Please note that this feature is experimental.
Signed-off-by: Michal Orzel <michal.orzel@arm.com>
Signed-off-by: Julien Grall <julien@xen.org>
Reviewed-by: Bertrand Marquis <bertrand.marquis@arm.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Ian Jackson <iwj@xenproject.org>
Introduce flag XEN_SYSCTL_PHYSCAP_vpmu which
indicates whether the platform supports vPMU
functionality. Modify Xen and tools accordingly.
Take the opportunity and fix XEN_SYSCTL_PHYSCAP_vmtrace
definition in sysctl.h which wrongly use (1 << 6)
instead of (1u << 6).
Signed-off-by: Michal Orzel <michal.orzel@arm.com>
Reviewed-by: Bertrand Marquis <bertrand.marquis@arm.com>
Acked-by: Nick Rosbrook <rosbrookn@ainfosec.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Acked-by: Ian Jackson <iwj@xenproject.org>
Acked-by: Christian Lindig <christian.lindig@citrix.com>
Introduce XEN_DOMCTL_CDF_vpci flag to enable VPCI support in XEN.
Reject the use of this new flag for x86 as VPCI is not supported for
DOMU guests for x86.
Signed-off-by: Rahul Singh <rahul.singh@arm.com>
[stefano: drop _XEN_DOMCTL_CDF_vpci]
Signed-off-by: Stefano Stabellini <stefano.stabellini@xilinx.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Acked-by: Christian Lindig <christian.lindig@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
For log-dirty operations a 64-bit field is being truncated to become an
"int" return value. Seeing the large number of arguments the present
function takes, reduce its set of parameters to that needed for all
operations not involving the log-dirty bitmap, while introducing a new
wrapper for the log-dirty bitmap operations. This new function in turn
doesn't need an "mb" parameter, but has a 64-bit return type. (Using the
return value in favor of a pointer-type parameter is left as is, to
disturb callers as little as possible.)
While altering xc_shadow_control() anyway, also adjust the types of the
last two of the remaining parameters.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Christian Lindig <christian.lindig@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Acked-by: Ian Jackson <iwj@xenproject.org>
Current unit8_t for pirq argument in this interface is too restrictive
causing failures on modern hardware with lots of GSIs. That extends down to
XEN_DOMCTL_irq_permission ABI structure where it needs to be fixed up
as well.
Internal Xen structures appear to be fine. Existing users of the interface
in tree (libxl, ocaml and python bindings) are currently using signed int
for pirq representation which should be wide enough. Converting them to
uint32_t now is desirable to avoid accidental passing of a negative
number (probably denoting an error code) by caller as pirq, but left for
the future clean up.
Domctl interface version is needed to be bumped with this change but that
was already done by 918b8842a8 ("arm64: Change type of hsr, cpsr, spsr_el1
to uint64_t") in this release cycle.
Additionally, take a change and convert allow_access argument to bool.
Signed-off-by: Igor Druzhinin <igor.druzhinin@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Christian Lindig <christian.lindig@citrix.com>
Acked-by: Julien Grall <jgrall@amazon.com>
If PAGE_SIZE is already defined in the system (e.g. in /usr/include/limits.h
header) then gcc will trigger a redefinition error because of -Werror. This
patch replaces usage of PAGE_* macros with XC_PAGE_* macros in order to avoid
confusion between control domain page granularity (PAGE_* definitions) and
guest domain page granularity (which is what we are dealing with here).
Same issue applies for redefinitions of Val_none and Some_val macros which
can be already define in the OCaml system headers (e.g.
/usr/lib/ocaml/caml/mlvalues.h).
Signed-off-by: Costin Lupu <costin.lupu@cs.pub.ro>
Reviewed-by: Julien Grall <jgrall@amazon.com>
Acked-by: Ian Jackson <iwj@xenproject.org>
Tested-by: Dario Faggioli <dfaggioli@suse.com>
Instead of open coding the mapping of the p2m list use the already
existing xc_core_arch_map_p2m() call, especially as the current code
does not support guests with the linear p2m map. It should be noted
that this code is needed for colo/remus only.
Switching to xc_core_arch_map_p2m() drops the need to bail out for
bitness of tool stack and guest differing.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Christian Lindig <christian.lindig@citrix.com>
Acked-by: Wei Liu <wl@xen.org>
Introduce an option to allow selecting a behavior similar to the pre
Xen 4.15 one for accesses to MSRs not explicitly handled. Since commit
84e848fd7a and 322ec7c89f accesses to MSRs not explicitly
handled by Xen result in the injection of a #GP to the guest. This
is a behavior change since previously a #GP was only injected if
accessing the MSR on the real hardware would also trigger a #GP, or if
the attempted to be set bits wouldn't match the hardware values (for
PV). The reasons for not leaking hardware MSR values and injecting a
#GP are fully valid, so the solution proposed here should be
considered a temporary workaround until all the required MSRs are
properly handled.
This seems to be problematic for some guests, so introduce an option
to fallback to this kind of legacy behavior without leaking the
underlying MSR values to the guest.
When the option is set, for both PV and HVM don't inject a #GP to the
guest on MSR read if reading the underlying MSR doesn't result in a
#GP, do the same for writes and simply discard the value to be written
on that case.
Note that for guests restored or migrated from previous Xen versions
the option is enabled by default, in order to keep a compatible
MSR behavior. Such compatibility is done at the libxl layer, to avoid
higher-level toolstacks from having to know the details about this flag.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Christian Lindig <christian.lindig@citrix.com>
Reviewed-by: Ian Jackson <iwj@xenproject.org>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Tested-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Release-Acked-by: Ian Jackson <iwj@xenproject.org>
We're about to introduce support for Intel Processor Trace, but similar
functionality exists in other platforms.
Aspects of vmtrace can reasonably can be common, so start with
XEN_SYSCTL_PHYSCAP_vmtrace and plumb the signal from Xen all the way down into
`xl info`.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
One can specify the domid to use when creating the domain, but this was
hardcoded to 0.
Keep the existing `domain_create` function, and make domid an optional
argument. When not specified, default to 0.
Controlling the domid can be useful during testing or migration.
Signed-off-by: Edwin Török <edvin.torok@citrix.com>
Acked-by: Christian Lindig <christian.lindig@citrix.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Xenmmap.unmap sets the address to MAP_FAILED in xenmmap_stubs.c. If due to a
bug there were still references to the Xenbus and we attempt to use it then we
crash. Raise an exception instead of crashing.
Signed-off-by: Edwin Török <edvin.torok@citrix.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
On NetBSD xen/sys/evtchn.h is not available any more. Just remove it as it's
not needed.
Signed-off-by: Manuel Bouyer <bouyer@netbsd.org>
Acked-by: Christian Lindig <christian.lindig@citrix.com>
... to be used by callers of libxl_device_pci_assignable_list().
Currently there is no API for callers of libxl_device_pci_assignable_list()
to free the list. The xl function pciassignable_list() calls
libxl_device_pci_dispose() on each element of the returned list, but
libxl_pci_assignable() in libxl_pci.c does not. Neither does the implementation
of libxl_device_pci_assignable_list() call libxl_device_pci_init().
This patch adds the new API function, makes sure it is used everywhere and
also modifies libxl_device_pci_assignable_list() to initialize list
entries rather than just zeroing them.
Signed-off-by: Paul Durrant <pdurrant@amazon.com>
Acked-by: Christian Lindig <christian.lindig@citrix.com>
Reviewed-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Acked-by: Wei Liu <wl@xen.org>
Currently, oxenstored checks the length of paths against 1024, then
prepends "/local/domain/$DOMID/" to relative paths. This allows a domU
to create paths which can't subsequently be read by anyone, even dom0.
This also interferes with listing directories, etc.
Define a new oxenstored.conf entry: quota-path-max, defaulting to 1024
as before. For paths that begin with "/local/domain/$DOMID/" check the
relative path length against this quota. For all other paths check the
entire path length.
This ensures that if the domid changes (and thus the length of a prefix
changes) a path that used to be valid stays valid (e.g. after a
live-migration). It also ensures that regardless how the client tries
to access a path (domid-relative or absolute) it will get consistent
results, since the limit is always applied on the final canonicalized
path.
Delete the unused Domain.get_path to avoid it being confused with
Connection.get_path (which differs by a trailing slash only).
Rewrite Util.path_validate to apply the appropriate length restriction
based on whether the path is relative or not. Remove the check for
connection_path being absolute, because it is not guest controlled data.
This is part of XSA-323.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Edwin Török <edvin.torok@citrix.com>
Acked-by: Christian Lindig <christian.lindig@citrix.com>
Instead of each library having an own include directory move the
official headers to tools/include instead. This will drop the need to
link those headers to tools/include and there is no need any longer
to have library-specific include paths when building Xen.
While at it remove setting of the unused variable
PKG_CONFIG_CFLAGS_LOCAL in libs/*/Makefile.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Christian Lindig <christian.lindig@citrix.com>
Tested-by: Bertrand Marquis <bertrand.marquis@arm.com>
Acked-by: Ian Jackson <iwj@xenproject.org>
Like other major areas of functionality, nested virt (or not) needs to be
known at domain creation time for sensible CPUID handling, and wants to be
known this early for sensible infrastructure handling in Xen.
Introduce XEN_DOMCTL_CDF_nested_virt and modify libxl to set it appropriately
when creating domains. There is no need to adjust the ARM logic to reject the
use of this new flag.
No functional change yet.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Wei Liu <wl@xen.org>
Acked-by: Christian Lindig <christian.lindig@citrix.com>
Carve out all libxenlight related sources and move them to
tools/libs/light in order to use the generic library build environment.
The closely related sources for libxl-save-helper and the libxl test
environment are being moved, too.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Wei Liu <wl@xen.org>
dbc84d2983 (Xen >= 4.9.0) deleted XS_RESTRICT
from oxenstored, which caused all the following opcodes to be shifted by 1:
reset_watches became off-by-one compared to the C version of xenstored.
Looking at the C code the opcode for reset watches needs:
XS_RESET_WATCHES = XS_SET_TARGET + 2
So add the placeholder `Invalid` in the OCaml<->C mapping list.
(Note that the code here doesn't simply convert the OCaml constructor to
an integer, so we don't need to introduce a dummy constructor).
Igor says that with a suitably patched xenopsd to enable watch reset,
we now see `reset watches` during kdump of a guest in xenstored-access.log.
Signed-off-by: Edwin Török <edvin.torok@citrix.com>
Tested-by: Igor Druzhinin <igor.druzhinin@citrix.com>
Acked-by: Christian Lindig <christian.lindig@citrix.com>
The OCaml code has been fixed to handle properly -safe-string in Xen
4.11, however the stubs part were missed.
On OCaml newer than 4.06.1, String_Val() will return a const char *
when using -safe-string leading to build failure when this is used
in place where char * is expected.
The main use in Xen code base is when a new string is allocated. The
suggested approach by the OCaml community [1] is to use the helper
caml_alloc_initialized_string() but it was introduced by OCaml 4.06.1.
The next best approach is to cast String_val() to (char *) as the helper
would have done. So use it when we need to update the new string using
memcpy().
Take the opportunity to remove the unnecessary cast of the source as
mempcy() is expecting a void *.
[1] https://github.com/ocaml/ocaml/pull/1274
Reported-by: Dario Faggioli <dfaggioli@suse.com>
Signed-off-by: Julien Grall <jgrall@amazon.com>
Acked-by: Christian Lindig <christian.lindig@citrix.com>
Commit ec7d54dd1a "ocaml/libs/xb: Use bytes in place of strings for
mutable buffers" switch mutable buffers from string to bytes. However
the C code were still using String_Val() to access them.
While the underlying structure is the same between string and bytes, a
string is meant to be immutable. OCaml 4.06.1 and later will enforce it.
Therefore, it will not be possible to build the OCaml libs when using
-safe-string. This is because String_val() will return a const value.
To avoid plain cast in the code, the code is now switched to use
Bytes_val(). As the macro is not defined in older OCaml version, we need
to provide a stub.
Take the opportunity to switch to const the buffer in
ml_interface_write() as it should not be modified.
Reported-by: Dario Faggioli <dfaggioli@suse.com>
Signed-off-by: Julien Grall <jgrall@amazon.com>
Acked-by: Christian Lindig <christian.lindig@citrix.com>
stub_header_of_string() should not modify the header. So mark the
variable 'hdr' as const.
Signed-off-by: Julien Grall <jgrall@amazon.com>
Acked-by: Christian Lindig <christian.lindig@citrix.com>
xc_vcpu_getcontext() may fail to retrieve the vcpu context. Rather than
ignoring the return value, check it and throw an error if needed.
Signed-off-by: Julien Grall <jgrall@amazon.com>
Acked-by: Christian Lindig <christian.lindig@citrix.com>
gcc (GCC) 9.2.0 complains:
xentoollog_stubs.c: In function ‘stub_xtl_ocaml_vmessage’:
xentoollog_stubs.c:93:16: error: initialization discards ‘const’ qualifier from pointer target type [-Werror=discarded-qualifiers]
93 | value *func = caml_named_value(xtl->vmessage_cb) ;
| ^~~~~~~~~~~~~~~~
This patch constifies the pointer returned by caml_named_value in order
to the accommodate newer versions of OCaml.
In OCaml >= 4.09 the return value pointer of caml_named_value is
declared const.
https://github.com/ocaml/ocaml/commit/4f03a1467d29cf587df5a191830f1525506ee0e3
Signed-off-by: Petre Pircalabu <ppircalabu@bitdefender.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Release-acked-by: Juergen Gross <jgross@suse.com>
Acked-by: Wei Liu <wl@xen.org>
[ wei: remove spaces before semicolons ]
Signed-off-by: Wei Liu <wl@xen.org>
Currently only suspend power control requests wait for an ack from the
domain, while power off or reboot requests simply write the command to
xenstore and exit.
Introduce a 1 minute wait for the domain to acknowledge the request, or
else return an error. The suspend code is slightly modified to use the
new infrastructure added, but shouldn't have any functional change.
Fix the ocaml bindings and also provide a backwards compatible
interface for the reboot and poweroff libxl API functions.
Reported-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Release-acked-by: Juergen Gross <jgross@suse.com>
Acked-by: Christian Lindig <christian.lindig@citrix.com>
[ wei: change ret to rc to fix build ]
Signed-off-by: Wei Liu <wl@xen.org>
...and hence the ability to disable IOMMU mappings, and control EPT
sharing.
This patch introduces a new 'libxl_passthrough' enumeration into
libxl_domain_create_info. The value will be set by xl either when it parses
a new 'passthrough' option in xl.cfg, or implicitly if there is passthrough
hardware specified for the domain.
If the value of the passthrough configuration option is 'disabled' then
the XEN_DOMCTL_CDF_iommu flag will be clear in the xen_domctl_createdomain
flags, thus allowing the toolstack to control whether the domain gets
IOMMU mappings or not (where previously they were globally set).
If the value of the passthrough configuration option is 'sync_pt' then
a new 'iommu_opts' field in xen_domctl_createdomain will be set with the
value XEN_DOMCTL_IOMMU_no_sharept. This will override the global default
set in iommu_hap_pt_share, thus allowing the toolstack to control whether
EPT sharing is used for the domain.
If the value of passthrough is 'enabled' then xl will choose an appropriate
default according to the type of domain and hardware support.
NOTE: The 'iommu_memkb' overhead in libxl_domain_build_info will now only
be set if passthrough is 'sync_pt' (or xl has chosen this mode as
a default).
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Christian Lindig <christian.lindig@citrix.com>
Acked-by: Julien Grall <julien.grall@arm.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
If the end of one enum is the `type' line for the next enum, we would
not notice it.
Fix this by reordering the code, and getting rid of the else: now if
the "we are within an enum" branch decides that it's the end of the
enum, it unsets $ei and we then immediately process the line as a "not
within an enum" line - ie as the start of the next one.
Reported-by: Paul Durrant <paul.durrant@citrix.com>
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Acked-by: Christian Lindig <christian.lindig@citrix.com>
The following libxl API became asynchronous and gained an additional
`ao_how' parameter:
libxl_domain_pause()
libxl_domain_unpause()
libxl_send_trigger()
Adapt the ocaml binding.
Build tested only.
Fixes: edaa631ddc
Fixes: 95627b87c3
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
This patch defines a new bit reported in the hw_cap field of struct
xen_sysctl_physinfo to indicate whether the platform supports sharing of
HAP page tables (i.e. the P2M) with the IOMMU. This informs the toolstack
whether the domain needs extra memory to store discrete IOMMU page tables
or not.
NOTE: This patch makes sure iommu_hap_pt_shared is clear if HAP is not
supported or the IOMMU is disabled, and defines it to false if
!CONFIG_HVM.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Christian Lindig <christian.lindig@citrix.com>
Acked-by: Wei Liu <wl@xen.org>
Acked-by: Julien Grall <julien.grall@arm.com>
This patch introduces a common domain creation flag to determine whether
the domain is permitted to make use of the IOMMU. Currently the flag is
always set for both dom0 and any domU created by libxl if the IOMMU is
globally enabled (i.e. iommu_enabled == 1). sanitise_domain_config() is
modified to reject the flag if !iommu_enabled.
A new helper function, is_iommu_enabled(), is added to test the flag and
iommu_domain_init() will return immediately if !is_iommu_enabled(). This is
slightly different to the previous behaviour based on !iommu_enabled where
the call to arch_iommu_domain_init() was made regardless, however it appears
that this call was only necessary to initialize the dt_devices list for ARM
such that iommu_release_dt_devices() can be called unconditionally by
domain_relinquish_resources(). Adding a simple check of is_iommu_enabled()
into iommu_release_dt_devices() keeps this unconditional call working.
No functional change should be observed with this patch applied.
Subsequent patches will allow the toolstack to control whether use of the
IOMMU is enabled for a domain.
NOTE: The introduction of the is_iommu_enabled() helper function might
seem excessive but its use is expected to increase with subsequent
patches. Also, having iommu_domain_init() bail before calling
arch_iommu_domain_init() is not strictly necessary, but I think the
consequent addition of the call to is_iommu_enabled() in
iommu_release_dt_devices() makes the code clearer.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Reviewed-by: "Roger Pau Monné" <roger.pau@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Christian Lindig <christian.lindig@citrix.com>
Acked-by: Julien Grall <julien.grall@arm.com>
Report whether shadow paging is supported by the hypervisor, since it
can be disabled at build time.
Reuse and tweak LIBXL_HAVE_PHYSINFO_CAP_HAP as it hasn't appeared in a
released version of Xen yet.
Requested-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Current libxl code will always enable Hardware Assisted Paging (HAP),
expecting that the hypervisor will fallback to shadow if HAP is not
available. With the changes to DOMCTL_createdomain that's not the case
any longer, and the hypervisor will raise an error if HAP is not
available instead of silently falling back to shadow.
In order to keep the previous functionality report whether HAP is
available or not in XEN_SYSCTL_physinfo, so that the toolstack can
select a sane default if there's no explicit user selection of whether
HAP should be used.
Note that on ARM hardware HAP capability is always reported since it's
a required feature in order to run Xen.
Fixes: d0c0ba7d3d ('x86/hvm/domain: remove the 'hap_enabled' flag')
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Paul Durrant <paul.durrant@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Julien Grall <julien.grall@arm.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Christian Lindig <christian.lindig@citrix.com>
gcc (GCC) 4.8.5 20150623 (Red Hat 4.8.5-28) complains:
xenctrl_stubs.c: In function 'stub_xc_domain_create':
xenctrl_stubs.c:216:28: error: 'val' may be used uninitialized
in this function [-Werror=maybe-uninitialized]
cfg.arch.emulation_flags = ocaml_list_to_c_bitmap
^
xenctrl_stubs.c:198:12: error: 'val' may be used uninitialized
in this function [-Werror=maybe-uninitialized]
cfg.flags = ocaml_list_to_c_bitmap
^
cc1: all warnings being treated as errors
GCC doesn't point at the correct piece of code, but the diagnostic text is
correct, and can occur when the list is empty. Initialise val to 0.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Christian Lindig <christian.lindig@citrix.com>
Fix a broken regexp which would mention `$/' when it ought to have
mentioned `$'. The result would be that it would match lines like
type some_ocaml_type = Thing | Other_Thing
but ignore everything but the type name, giving wrong answers.
Check that we check mentioned types. Otherwise if we fail to spot
some suitable thing in the ocaml, we would just omit checking this
type !
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Andrew Cooper <Andrew.Cooper3@citrix.com>
Acked-by: Christian Lindig <christian.lindig@citrix.com>
In the generated C, add some comments saying where we found the ocaml
type. This helps with debugging. (I considered emitting #line
directives but decided this would be more confusing than helpful.)
Improve two dies.
Use better-named filehandles (perl prints thier names when it dies).
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Andrew Cooper <Andrew.Cooper3@citrix.com>
Acked-by: Christian Lindig <christian.lindig@citrix.com>
c/s f089fddd94 broke the Ocaml ABI by renumering
XEN_SYSCTL_PHYSCAP_directio without adjusting the Ocaml
physinfo_cap_flag enumeration.
Add build machinery which will check the ABI correspondence.
This will result in a compile time failure whenever constants get
renumbered/added without a compatible adjustment to the Ocaml ABI.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Christian Lindig <christian.lindig@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <Andrew.Cooper3@citrix.com>
c/s f089fddd94 broke the Ocaml ABI by renumering XEN_SYSCTL_PHYSCAP_directio
without adjusting the Ocaml physinfo_cap_flag enumeration. Fix this by
inserting CAP_PV between CAP_HVM and CAP_DirectIO.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Ian Jackson <ian.jackson@eu.citrix.com>
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Roger Pau Monné
Andrew Cooper
Michal Orzel
Rahul Singh
Jan Beulich
Igor Druzhinin
Costin Lupu
Juergen Gross
Edwin Török
Manuel Bouyer
Paul Durrant
Julien Grall
Petre Pircalabu
Paul Durrant
Ian Jackson
Anthony PERARD