Introduce a new domain create field so that toolstack can specify the
maximum grant table version usable by the domain. This is plumbed into
xl and settable by the user as max_grant_version.
Previously this was only settable on a per host basis using the
gnttab command line option.
Note the version is specified using 4 bits, which leaves room to
specify up to grant table version 15. Given that we only have 2 grant
table versions right now, and a new version is unlikely in the near
future using 4 bits seems more than enough.
xenstored stubdomains are limited to grant table v1 because the
current MiniOS code used to build them only has support for grants v1.
There are existing limits set for xenstored stubdomains at creation
time that already match the defaults in MiniOS.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Christian Lindig <christian.lindig@citrix.com>
Reviewed-by: Ian Jackson <iwj@xenproject.org>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Release-Acked-by: Ian Jackson <iwj@xenproject.org>
In order to let the toolstack be able to set the gnttab version on a
per-domain basis, it needs to know which ABIs Xen supports. Introduce
XEN_SYSCTL_PHYSCAP_gnttab_v{1,2} for the purpose, and plumb in down into
userspace.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Christian Lindig <christian.lindig@citrix.com>
Reviewed-by: Ian Jackson <iwj@xenproject.org>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Releae-Acked-by: Ian Jackson <iwj@xenproject.org>
This reverts commit 2075b410ee.
During the discussion [1] that took place after
the patch was merged it was agreed that it should
be reverted to avoid introducing a bad interface.
Furthermore, the patch rejected usage of flag
XEN_DOMCTL_CDF_vpci for x86 which is not true
as it should be set for dom0 PVH.
Due to XEN_DOMCTL_CDF_vpmu being introduced after
XEN_DOMCTL_CDF_vpci, modify its bit position
from 8 to 7.
[1] https://marc.info/?t=163354215300039&r=1&w=2
Signed-off-by: Michal Orzel <michal.orzel@arm.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Christian Lindig <christian.lindig@citrix.com<mailto:christian.lindig@citrix.com>>
Acked-by: Julien Grall <jgrall@amazon.com>
Reviewed-by: Bertrand Marquis <bertrand.marquis@arm.com>
Add parameter vpmu to xl domain configuration syntax
to enable the access to PMU registers by disabling
the PMU traps(currently only for ARM).
The current status is that the PMU registers are not
virtualized and the physical registers are directly
accessible when this parameter is enabled. There is no
interrupt support and Xen will not save/restore the
register values on context switches.
According to Arm Arm, section D7.1:
"The Performance Monitors Extension is common
to AArch64 operation and AArch32 operation."
That means we have an ensurance that if PMU is
present in one exception state, it must also be
present in the other.
Please note that this feature is experimental.
Signed-off-by: Michal Orzel <michal.orzel@arm.com>
Signed-off-by: Julien Grall <julien@xen.org>
Reviewed-by: Bertrand Marquis <bertrand.marquis@arm.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Ian Jackson <iwj@xenproject.org>
Introduce flag XEN_SYSCTL_PHYSCAP_vpmu which
indicates whether the platform supports vPMU
functionality. Modify Xen and tools accordingly.
Take the opportunity and fix XEN_SYSCTL_PHYSCAP_vmtrace
definition in sysctl.h which wrongly use (1 << 6)
instead of (1u << 6).
Signed-off-by: Michal Orzel <michal.orzel@arm.com>
Reviewed-by: Bertrand Marquis <bertrand.marquis@arm.com>
Acked-by: Nick Rosbrook <rosbrookn@ainfosec.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Acked-by: Ian Jackson <iwj@xenproject.org>
Acked-by: Christian Lindig <christian.lindig@citrix.com>
Introduce XEN_DOMCTL_CDF_vpci flag to enable VPCI support in XEN.
Reject the use of this new flag for x86 as VPCI is not supported for
DOMU guests for x86.
Signed-off-by: Rahul Singh <rahul.singh@arm.com>
[stefano: drop _XEN_DOMCTL_CDF_vpci]
Signed-off-by: Stefano Stabellini <stefano.stabellini@xilinx.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Acked-by: Christian Lindig <christian.lindig@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Introduce an option to allow selecting a behavior similar to the pre
Xen 4.15 one for accesses to MSRs not explicitly handled. Since commit
84e848fd7a and 322ec7c89f accesses to MSRs not explicitly
handled by Xen result in the injection of a #GP to the guest. This
is a behavior change since previously a #GP was only injected if
accessing the MSR on the real hardware would also trigger a #GP, or if
the attempted to be set bits wouldn't match the hardware values (for
PV). The reasons for not leaking hardware MSR values and injecting a
#GP are fully valid, so the solution proposed here should be
considered a temporary workaround until all the required MSRs are
properly handled.
This seems to be problematic for some guests, so introduce an option
to fallback to this kind of legacy behavior without leaking the
underlying MSR values to the guest.
When the option is set, for both PV and HVM don't inject a #GP to the
guest on MSR read if reading the underlying MSR doesn't result in a
#GP, do the same for writes and simply discard the value to be written
on that case.
Note that for guests restored or migrated from previous Xen versions
the option is enabled by default, in order to keep a compatible
MSR behavior. Such compatibility is done at the libxl layer, to avoid
higher-level toolstacks from having to know the details about this flag.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Christian Lindig <christian.lindig@citrix.com>
Reviewed-by: Ian Jackson <iwj@xenproject.org>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Tested-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Release-Acked-by: Ian Jackson <iwj@xenproject.org>
We're about to introduce support for Intel Processor Trace, but similar
functionality exists in other platforms.
Aspects of vmtrace can reasonably can be common, so start with
XEN_SYSCTL_PHYSCAP_vmtrace and plumb the signal from Xen all the way down into
`xl info`.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
One can specify the domid to use when creating the domain, but this was
hardcoded to 0.
Keep the existing `domain_create` function, and make domid an optional
argument. When not specified, default to 0.
Controlling the domid can be useful during testing or migration.
Signed-off-by: Edwin Török <edvin.torok@citrix.com>
Acked-by: Christian Lindig <christian.lindig@citrix.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Like other major areas of functionality, nested virt (or not) needs to be
known at domain creation time for sensible CPUID handling, and wants to be
known this early for sensible infrastructure handling in Xen.
Introduce XEN_DOMCTL_CDF_nested_virt and modify libxl to set it appropriately
when creating domains. There is no need to adjust the ARM logic to reject the
use of this new flag.
No functional change yet.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Wei Liu <wl@xen.org>
Acked-by: Christian Lindig <christian.lindig@citrix.com>
...and hence the ability to disable IOMMU mappings, and control EPT
sharing.
This patch introduces a new 'libxl_passthrough' enumeration into
libxl_domain_create_info. The value will be set by xl either when it parses
a new 'passthrough' option in xl.cfg, or implicitly if there is passthrough
hardware specified for the domain.
If the value of the passthrough configuration option is 'disabled' then
the XEN_DOMCTL_CDF_iommu flag will be clear in the xen_domctl_createdomain
flags, thus allowing the toolstack to control whether the domain gets
IOMMU mappings or not (where previously they were globally set).
If the value of the passthrough configuration option is 'sync_pt' then
a new 'iommu_opts' field in xen_domctl_createdomain will be set with the
value XEN_DOMCTL_IOMMU_no_sharept. This will override the global default
set in iommu_hap_pt_share, thus allowing the toolstack to control whether
EPT sharing is used for the domain.
If the value of passthrough is 'enabled' then xl will choose an appropriate
default according to the type of domain and hardware support.
NOTE: The 'iommu_memkb' overhead in libxl_domain_build_info will now only
be set if passthrough is 'sync_pt' (or xl has chosen this mode as
a default).
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Christian Lindig <christian.lindig@citrix.com>
Acked-by: Julien Grall <julien.grall@arm.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
This patch defines a new bit reported in the hw_cap field of struct
xen_sysctl_physinfo to indicate whether the platform supports sharing of
HAP page tables (i.e. the P2M) with the IOMMU. This informs the toolstack
whether the domain needs extra memory to store discrete IOMMU page tables
or not.
NOTE: This patch makes sure iommu_hap_pt_shared is clear if HAP is not
supported or the IOMMU is disabled, and defines it to false if
!CONFIG_HVM.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Christian Lindig <christian.lindig@citrix.com>
Acked-by: Wei Liu <wl@xen.org>
Acked-by: Julien Grall <julien.grall@arm.com>
This patch introduces a common domain creation flag to determine whether
the domain is permitted to make use of the IOMMU. Currently the flag is
always set for both dom0 and any domU created by libxl if the IOMMU is
globally enabled (i.e. iommu_enabled == 1). sanitise_domain_config() is
modified to reject the flag if !iommu_enabled.
A new helper function, is_iommu_enabled(), is added to test the flag and
iommu_domain_init() will return immediately if !is_iommu_enabled(). This is
slightly different to the previous behaviour based on !iommu_enabled where
the call to arch_iommu_domain_init() was made regardless, however it appears
that this call was only necessary to initialize the dt_devices list for ARM
such that iommu_release_dt_devices() can be called unconditionally by
domain_relinquish_resources(). Adding a simple check of is_iommu_enabled()
into iommu_release_dt_devices() keeps this unconditional call working.
No functional change should be observed with this patch applied.
Subsequent patches will allow the toolstack to control whether use of the
IOMMU is enabled for a domain.
NOTE: The introduction of the is_iommu_enabled() helper function might
seem excessive but its use is expected to increase with subsequent
patches. Also, having iommu_domain_init() bail before calling
arch_iommu_domain_init() is not strictly necessary, but I think the
consequent addition of the call to is_iommu_enabled() in
iommu_release_dt_devices() makes the code clearer.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Reviewed-by: "Roger Pau Monné" <roger.pau@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Christian Lindig <christian.lindig@citrix.com>
Acked-by: Julien Grall <julien.grall@arm.com>
Report whether shadow paging is supported by the hypervisor, since it
can be disabled at build time.
Reuse and tweak LIBXL_HAVE_PHYSINFO_CAP_HAP as it hasn't appeared in a
released version of Xen yet.
Requested-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Current libxl code will always enable Hardware Assisted Paging (HAP),
expecting that the hypervisor will fallback to shadow if HAP is not
available. With the changes to DOMCTL_createdomain that's not the case
any longer, and the hypervisor will raise an error if HAP is not
available instead of silently falling back to shadow.
In order to keep the previous functionality report whether HAP is
available or not in XEN_SYSCTL_physinfo, so that the toolstack can
select a sane default if there's no explicit user selection of whether
HAP should be used.
Note that on ARM hardware HAP capability is always reported since it's
a required feature in order to run Xen.
Fixes: d0c0ba7d3d ('x86/hvm/domain: remove the 'hap_enabled' flag')
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Paul Durrant <paul.durrant@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Julien Grall <julien.grall@arm.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Christian Lindig <christian.lindig@citrix.com>
c/s f089fddd94 broke the Ocaml ABI by renumering XEN_SYSCTL_PHYSCAP_directio
without adjusting the Ocaml physinfo_cap_flag enumeration. Fix this by
inserting CAP_PV between CAP_HVM and CAP_DirectIO.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Ian Jackson <ian.jackson@eu.citrix.com>
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
This functionality is obsolete. It was introduced by c/s 41296317a3 into
Xend, but was never exposed in libxl.
Nothing limits this to PV guests, but it makes no sense for HVM guests.
Looking through the XenServer templates, this was used to work around bugs in
the 32bit RHEL/CentOS 4.7 and 4.8 kernels (fixed in 4.9) and RHEL/CentOS/OEL
5.2 and 5.3 kernels (fixed in 5.4). RHEL 4 as a major version went out of
support in 2017, whereas the 5.2/5.3 kernels went out of support when 5.4 was
released in 2009.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Acked-by: Christian Lindig <christian.lindig@citrix.com>
Acked-by: Wei Liu <wl@xen.org>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Commit 81946a73dc removed
Xenctrl.with_intf based on its undesirable behaviour of opening and
closing a Xenctrl connection with every invocation. This commit
re-introduces with_intf but with an updated behaviour: it maintains a
global Xenctrl connection which is opened upon first usage and kept
open. This handle can be obtained by clients using new functions
get_handle() and close_handle().
The main motivation of re-introducing with_intf is that otherwise
clients will have to implement this functionality individually.
Signed-off-by: Christian Lindig <christian.lindig@citrix.com>
Reviewed-by: Ian Jackson <ian.jackson@eu.citrix.com>
This wrapper hides an opening and closing of the xenctrl handle, which amongst
other things opens and closes multiple device files.
A process should create one handle at the start of day and reuse that; indeed
there is no guarentee that the process will retain sufficient permissions to
re-open /dev/xen/privcmd at a later point.
With the final user of Xenctrl.with_intf removed, drop the wrapper entirely.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Christian Lindig <christian.lindig@citrix.com>
XEN_DOMCTL_max_vcpus is a mandatory hypercall, but nothing actually prevents a
toolstack from unpausing a domain with no vcpus.
Originally, d->vcpus[] was an embedded array in struct domain, but c/s
fb442e217 "x86_64: allow more vCPU-s per guest" in Xen 4.0 altered it to being
dynamically allocated. A side effect of this is that d->vcpu[] is NULL until
XEN_DOMCTL_max_vcpus has completed, but a lot of hypercalls blindly
dereference it.
Even today, the behaviour of XEN_DOMCTL_max_vcpus is a mandatory singleton
call which can't change the number of vcpus once a value has been chosen.
In preparation to remote the hypercall, extend xen_domctl_createdomain with
the a max_vcpus field and arrange for all callers to pass the appropriate
value. There is no change in construction behaviour yet, but later patches
will rearrange the hypervisor internals.
For the python stubs, extend the domain_create keyword list to take a
max_vcpus parameter, in lieu of deleting the pyxc_domain_max_vcpus function.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Acked-by: Christian Lindig <christian.lindig@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
XEN_DOMCTL_set_gnttab_limits is a fairly new hypercall, and is strictly
mandatory. As it pertains to domain limits, it should be provided at
createdomain time.
In preparation to remove the hypercall, extend xen_domctl_createdomain with
the fields and arrange for all callers to pass appropriate details. There is
no change in construction behaviour yet, but later patches will rearrange the
hypervisor internals, then delete the hypercall.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Acked-by: Christian Lindig <christian.lindig@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
set_max_evtchn is somewhat weird. It was introduced with the event_fifo work,
but has never been used. Still, it is a bounding on resources consumed by the
event channel infrastructure, and should be part of createdomain, rather than
editable after the fact.
Drop XEN_DOMCTL_set_max_evtchn completely (including XSM hooks and libxc
wrappers), and retain the functionality in XEN_DOMCTL_createdomain.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Acked-by: Christian Lindig <christian.lindig@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
The underlying C function is about to make the same change, and the structure
is going to gain extra fields.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Christian Lindig <christian.lindig@citrix.com>
This function is entirely internal to xenctrl stubs, and serves only to
convert the uuid string to an integer array (making 16 memory allocations as
it goes), while the C stubs turns the integer array back into a binary array.
Instead, pass the string all the way down into C, and have sscanf() unpack it
directly into a xen_domain_handle_t object.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Christian Lindig <christian.lindig@citrix.com>
c/s 4ddf474e2 "tools/xen-mceinj: Pass in GPA when injecting through
MSR_MCI_ADDR" removed the remaining user of hypercall.
It has been listed as broken, deprecated and wont-fix since XSA-74, so take
this opportunity to remove it completely.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Christian Lindig <christian.lindig@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
There are no current users which I can locate. One piece of xend which didn't
move forwards into xl/libxl is this:
# Configure host CPUID consistency checks, which must be satisfied for this
# VM to be allowed to run on this host's processor type:
#cpuid_check=[ '1:ecx=xxxxxxxxxxxxxxxxxxxxxxxxxx1xxxxx' ]
# - Host must have VMX feature flag set
The implementation of xc_cpuid_check() is conceptually broken. Dom0's view of
CPUID is not the approprite view to check, and will be wrong in the presence
of CPUID masking/faulting, and for HVM-based toolstack domains.
If it turns out that the functionality is required, it should be implemented
in terms of XEN_SYSCTL_get_cpuid_policy to use the proper CPUID view.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
The alternative backend (a xen-api/xapi shim) is no longer around and
so this stuff is now just baggage which is getting in the way of
refactoring libxenctrl.
Nested virt probably suffices for this use case now.
This was the last component of the osdep infrastructure, so all the
dynamic loading etc stuff all falls away too.
As part of this I was forced to investigate the twisty
xc_map_foreign_* maze, which I have added to the
toolstack-library-apis doc in the hopes of doing something sensible.
NetBSD and Solaris now call xc_map_foreign_bulk_compat directly from
their xc_map_foreign_bulk, which could have been achieved by using
some ifdefs around a renamed function. This will fall out in the wash
when these functions move to their own library.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: David Scott <dave.scott@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
According to public/sched.h, there is a new shutdown_reason called
soft_reset. Propagate that value to ocaml.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: David Scott <dave@recoil.org>
As defined by the Xen public header the fifth value of
shutdown_reason is watchdog.
Signed-off-by: Simon Rowe <simon.rowe@eu.citrix.com>
Acked-by: David Scott <dave@recoil.org>
Add a new field 'max_nr_cpus' to the physinfo type in the ocaml xc bindings
Signed-off-by: Zheng Li <zheng.li@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell.com>
Committed-by: Ian Jackson <ian.jackson.citrix.com>
The library was only minimally used, and was really rather redundant.
Signed-off-by: Zheng Li <zheng.li@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell.com>
Committed-by: Ian Jackson <ian.jackson.citrix.com>
Acked-by: Jon Ludlam <jonathan.ludlam@eu.citrix.com>
ocamlfind does not support namespaces, so to avoid
name clashes the module names have become longer.
Additionally, the xenstore and xenbus subdirs, which
contain several modules each, have been packed into
toplevel Xenstore and Xenbus modules.
xb becomes xenbus, xc becomes xenctrl, xl becomes xenlight,
xs becomes xenstore, eventchn becomes xeneventchn and
mmap becomes xenmmap.
[ Patch modified from that submitted, to update the .hgignore, and to
cope with intervening changes to mmap_stubs.c -iwj ]
Signed-off-by: Jon Ludlam <jonathan.ludlam@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
Roger Pau Monne
Andrew Cooper
Michal Orzel
Rahul Singh
Edwin Török
Paul Durrant
Ian Jackson
Christian Lindig
Jon Ludlam
Ian Campbell
Wei Liu
Simon Rowe
Jon Ludlam