The original rule to target "distclean" in tools/Rules.mk was in effect
"make clean". It should be "make distclean".
However not all Makefiles in subdirectories have distclean target
defined. So this patch also adds a bunch of distclean targets to various
Makefiles. They only depend on clean target and don't have any actions
in most cases.
With the patch applied, following command outputs 0 results:
find tools -name 'Makefile*' -exec grep -L 'distclean' {} \+ \
| grep -v ocaml | grep -v libfsimage
Ocaml and libfsimage are known to have distclean defined in a dedicated
rules file.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Newer iasl complains about this being violated.
Also convert a ShiftLeft(<constant>, <constant>) to a plain constant.
Reported-by: Ian Campbell <Ian.Campbell@citrix.com>
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Newer iasl validly complains that such routines would otherwise need to
be marked Serialized (in the SSDT case it can't know that explicit
serialization is being enforced), which is undesirable. Use Local<N>
instead.
Reported-by: Ian Campbell <Ian.Campbell@citrix.com>
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
The VM generation ID support in libxc/libxl was based on a draft
specification which subsequently changed considerably. Remove much of
the code in anticipation of introducing something simpler that
conforms to the current specification from Microsoft.
Switch to using a HVM param (HVM_PARAM_VM_GENERATION_ID_ADDR) instead
of the hvmloader/generation-id-address XenStore key. This simplifies
save/restore since it only needs to transfer the value of this param.
There are no changes to the migration stream format or the public
libxl API.
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
[ ijc -- updated xc_nomigrate.c for interface change ]
WinXP and Win2K3, while having no problem with the QWordMemory resource
(there was another one there before), don't like operations on 64-bit
fields. Split the fields d0688669 ("hvmloader: also cover PCI MMIO
ranges above 4G with UC MTRR ranges") added to 32-bit ones, handling
carry over explicitly.
Sadly the constructs needed to create the sub-fields - nominally
CreateDWordField(PRT0, \_SB.PCI0._CRS._Y02._MIN, MINL)
CreateDWordField(PRT0, Add(\_SB.PCI0._CRS._Y02._MIN, 4), MINH)
- can't be used: The former gets warned upon by newer iasl, i.e. would
need to be replaced by the latter just with the addend changed to 0,
and the latter doesn't translate properly with recent iasl). Hence,
short of having an ASL/iasl expert at hand, we need to work around the
shortcomings of various iasl versions. See the code comment.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
While most of them support what we have now, Wheezy's dislikes the
empty range. Put a fake one in place - it's getting overwritten upon
evaluation of _CRS anyway.
The range could be grown (downwards) if necessary; the way it is now
it is
- the highest possible one below the 36-bit boundary (with 36 bits
being the lowest common denominator for all supported systems),
- the smallest possible one that said iasl accepts.
Reported-by: Sander Eikelenboom <linux@eikelenboom.it>
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
When adding support for BAR assignments to addresses above 4G, the MTRR
side of things was left out.
Additionally the MMIO ranges in the DSDT's \_SB.PCI0._CRS were having
memory types not matching the ones put into MTRRs: The legacy VGA range
is supposed to be WC, and the other ones should be UC.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
This should help to reduce a CPU hotplug race window where a cpu hotplug
event while not be seen by the OS.
When hotplugging more than one vcpu, some of those vcpus might not be
seen as plugged by the guest.
This is what is currently happenning:
1. hw adds cpu, sets GPE.2 bit and sends SCI
2. OSPM gets SCI, reads GPE00.sts and masks GPE.2 bit in GPE00.en
3. OSPM executes _L02 (level-triggered event associate to cpu hotplug)
4. hw adds second cpu and sets GPE.2 bit but SCI is not asserted
since GPE00.en masks event
5. OSPM resets GPE.2 bit in GPE00.sts and umasks it in GPE00.en
as result event for step 4 is lost because step 5 clears it and OS
will not see added second cpu.
ACPI 50 spec: 5.6.4 General-Purpose Event Handling
defines GPE event handling as following:
1. Disables the interrupt source (GPEx_BLK EN bit).
2. If an edge event, clears the status bit.
3. Performs one of the following:
* Dispatches to an ACPI-aware device driver.
* Queues the matching control method for execution.
* Manages a wake event using device _PRW objects.
4. If a level event, clears the status bit.
5. Enables the interrupt source.
So, by using edge-triggered General-Purpose Event instead of a
level-triggered GPE, OSPM is less likely to clear the status bit of the
addition of the second CPU. On step 5, QEMU will resend an interrupt if
the status bit is set.
This description apply also for PCI hotplug since the same step are
followed by QEMU, so we also change the GPE event type for PCI hotplug.
This does not apply to qemu-xen-traditional because it does not resend
an interrupt if necessary as a result of step 5.
Patch and description inspired by SeaBIOS's commit:
Replace level gpe event with edge gpe event for hot-plug handlers
9c6635bd48d39a1d17d0a73df6e577ef6bd0037c
from Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Keir Fraser <keir@xen.org>
With hvmloader telling the guest that it may skip REG_C reads during
the processing of RTC interrupts, the emulation code must not depend
upon these reads to occur. Introduce two modes of operation for the
emulation code, and short of a HVM parameter (too late to be
introduced for 4.3) hard code the mode determination to always assume
that Windows-conforming one for the time being.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Tested-by: Roger Pau Monné <roger.pau@citrix.com> (FreeBSD guest)
This device was removed due to change in specifications.
Original patch written by Paul Durrant
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Signed-off-by: Frediano Ziglio <frediano.ziglio@citrix.com>
First draft specification document it as a 64bit counter, now are a 128bit
value handled as a couple of 64bit values.
Allow to disable the device is values are all zeroes.
Add documentation for platform/generation-id key.
Signed-off-by: Frediano Ziglio <frediano.ziglio@citrix.com>
The emacs variable to set the C style from a local variable block is
c-file-style, not c-set-style.
Signed-off-by: David Vrabel <david.vrabel@citrix.com
ACPI table passthrough support allowing additional static tables and
SSDTs (AML code) to be loaded. These additional tables are added at
the end of the secondary table list in the RSDT/XSDT tables.
Signed-off-by: Ross Philipson <ross.philipson@citrix.com>
Committed-by: Keir Fraser <keir@xen.org>
Microsoft have now published their VM generation ID specification at
https://www.microsoft.com/en-us/download/details.aspx?id=30707.
It differs from the original specification upon which I based my
implementation in several key areas. Particularly, it is no longer
an incrementing 64-bit counter and so this patch is to remove
the incr_generationid field from the build_info and also disable the
ACPI device before 4.2 is released.
I will follow up with further patches to implement the VM generation
ID to the new specification.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Committed-by: Keir Fraser <keir@xen.org>
Do not expose the ACPI power management "_PS0/3" Method to guest
firmware. According to section 3.4 of the APCI specification 4.0, PCI
device control the device power through its own specification but not
through APCI.
Qemu pushes "_PS0/3" to guest will cause a mess between ACPI PM and
PCI PM as a result of incorrect ACPI table shipped with the guest
BIOS, it may cause a failure of PCI device PM state transition(from
PCI_UNKNOWN to PCI_D0).
Signed-off-by: Xudong Hao <xudong.hao@intel.com>
Signed-off-by: Haitao Shan <haitao.shan@intel.com>
Committed-by: Keir Fraser <keir@xen.org>
Unfortunately a HID of PNP0A06 will not work for an existing client
driver so this patch aims to choose something that's pretty certain
not to class with anything else.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Committed-by: Keir Fraser <keir@xen.org>
and populate it at boot time with a value read from
"platform/generation_id". Also add code to libxl to populate this
xenstore key with the value of a new 'generation_id' parameter in the
VM config file. Populate the ADDR package of VM_Gen_Counter ACPI
device such that the first integer evaluates to the low order 32 bits
of the buffer address and the second integer evaluates to the high
order 32 bits of the buffer address.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Committed-by: Keir Fraser <keir@xen.org>
evaluating to two integers, and with _CID and _DDN set to
"VM_Gen_Counter".
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Committed-by: Keir Fraser <keir@xen.org>
Introduce acpi_s3 and acpi_s4 configuration options (default=1). The
S3 and S4 packages are moved into separate SSDTs and their inclusion
is controlled by the new configuration options.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Committed-by: Keir Fraser <keir@xen.org>
This avoids a conflict with SeaBIOS's memory management. Moreover
there is no reason that acp_info must live below 1MB, and moving it
out actually simplifies our code.
Signed-off-by: Keir Fraser <keir@xen.org>
In order to have two different DSDT tables for rombios and SeaBIOS,
this patch introduce a new parameter to acpi_build_tables() which
contain the DSDT table to load.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Committed-by: Keir Fraser <keir@xen.org>
The ACPI PIIX4 device in QEMU upstream as not the same behavior to
handle PCI hotplug. This patch introduce the necessary change to the
DSDT ACPI table to behave as expceted by the new QEMU.
To switch to this new DSDT table version, there is a new option
--dm-version to mk_dsdt.
Change are inspired by SeaBIOS DSDT source code.
There is few things missing with the new QEMU:
- QEMU provide the plugged/unplugged status only per slot (and not
per func like qemu-xen-traditionnal.
- I did not include the _STA ACPI method that give the status of a
device (present, functionning properly) because qemu-xen does not
handle it.
- I did not include the _RMV method that say if the device can be
removed,
because the IO port of QEMU that give this status always return
true. In
SeaBIOS table, they have a specific _RMV method for VGA, ISA that
return
false. But I'm not sure that we can do the same in Xen.
So, the only way to remove a device is from outside of the guest (like
with xl pci-detatch), and can not be initiated from inside.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Committed-by: Keir Fraser <keir@xen.org>
Use __attribute__((format(printf,..))) for the function _stmt to
prevent any mistake.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Committed-by: Keir Fraser <keir@xen.org>
This patch move the IO port range reservation from the dsdt.asl to
mk_dsdt. This IO port range need to be generated by mk_dsdt, because
qemu-xen use different port. The IO port for qemu-xen will be added in
a later patch.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Committed-by: Keir Fraser <keir@xen.org>
With this new option, there is no need to compile mk_dsdt for each
DSDT table that we want. The Makefile is a bit reorganize to handle
this new option and to prepare more change in a coming patch.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
In particular the madt_lapic0_addr and madt_csum_addr fields are
filled in while building the tables.
This fixes a bluescreen on shutdown with certain versions of Windows.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Reported-by: Christoph Egger <Christoph.Egger@amd.com>
Tested-and-acked-by: Christoph Egger <Christoph.Egger@amd.com>
When booting a Windows guest, the OS report an issue with the ACPI (in
a BSOD). The exact issue is "SCI_EN never becomes set in PM1 Control
Register." (quoted from WinDbg help).
So this patch enables the flags SCI_EN if it is not yet enabled.
Reported-by: Tobias Geiger <tobias.geiger@vido.info>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Keir Fraser <keir@xen.org>
I mistakenly thought that the "struct bios_info" was a ROMBIOS
specific data structure and so caused it to be populated only in the
ROMBIOS case.
However it turns out that the majority of the struct's fields are
actually referenced from the ACPI DSDT and hence are needed for
SeaBIOS too.
While in principal it might have been possible to continue to mix
ROMBIOS and ACPI bits in this datastructure this is, evidently,
confusing but also leads to header file dependencies from
ROMBIOS->hvmloader which I had been hoping to avoid so as to head-off
future accidental re-entanglement of ROMBIOS and hvmloader.
So instead I have split the ACPI parts into a new "struct acpi_info"
which is defined entirely within the acpi building code in hvmloader
and which comes with a big comment pointing to the DSDT interaction.
This new ACPI info is placed at 0x9F000 which is available under both
ROMBIOS and SeaBIOS. This address is in a reserved region of the E820
and is just above the ROMBIOS stack.
The resulting "struct rombios_info" is hardly worthy of its own
structure but keep it anyway.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Rather than building the tables twice, once purely to figure out the
size, just allocate each individual table as we go.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Windows SVVP tests require an HPET table even if the HPET is disabled.
This makes sense since the HPET _is_ in the DSDT and, while the OS
does not know that, in principle it's status may change.
(For what it's worth SeaBIOS, in addition to doing this, totally
ignores QEMU's -no-hpet flag and always reports 0x0f for the HPET's
_STA method).
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Keir Fraser <keir@xen.org>
Instead of hardcoding in a header.
Reduces the cross talk between ROMBIOS and hvmloader.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Keir Fraser <keir@xen.org>
It's not needed unless you are including headers in the current
directory _and_ you can't use "" instead of <> because the headers are
to be installed.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
Otherwise make can search the path relative to certain standard paths
such as /usr/include (e.g., the line '-include $(XEN_ROOT)/.config' in
Config.mk suffers from this).
Signed-off-by: Keir Fraser <keir@xen.org>
This change some fadt values -- the address of the acpi ioports -- and
the pm1a_evt_address value wrote for the pci bus.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
As part of the QEMU/Xen merge, this patch comes to change the value of
sleep states and add some information in the PCI registers to match the
implementation of the BIOS of QEMU.
It also does a hypercall (HVM_PARAM_ACPI_IOPORTS_LOCATION) that tell the
Xen to use the new Port I/O instead of the old one.
[ Also, in this patch, update QEMU_TAG to the qemu-xen revision
with the corresponding qemu change. -iwj ]
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
...because the default timesource (TSC) drifts under load.
The flag is only defined in ACPI 3.0, and we provide ACPI 2.0 tables,
but Windows seems happy enough to obey it anyway.
Signed-off-by: Tim Deegan <Tim.Deegan@citrix.com>
Fix an ACPI asl bug by explicitly convert PRS to buffer, otherwise PRS
would be parsed as integer if less than 32/64 bits (according to ACPI
1.0 or 2.0).
Signed-off-by: Liu, Jinsong <jinsong.liu@intel.com>
Move processor from \_PR to \_SB. ACPI processor can be defined
under \_PR or \_SB. However, recently os like linux 2.6.30/32 support
cpu hotplug better for \_SB processor object.
Signed-off-by: Jiang, Yunhong <yunhong.jiang@intel.com>
Signed-off-by: Liu, Jinsong <jinsong.liu@intel.com>
Signed-off-by: Keir Fraser <keir.fraser@citrix.com>
Wei Liu
Jan Beulich
David Vrabel
Anthony PERARD
Frediano Ziglio
Ross Philipson
Paul Durrant
Xudong Hao
Keir Fraser
Andrew Cooper
Ian Campbell
Paolo Bonzini
Keir Fraser