Since 23565:72eafe80ebc1 the xenstore entries for the stubdomain's PCI were
never created and therefore the stubdom ends up waiting forever for the devices
which it has been asked to insert to show up.
Since the stubdomain is already running when we call the libxl_device_pci_add
loop in do_domain_create we should treat it as if "starting == 0".
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson.citrix.com>
Committed-by: Ian Jackson <ian.jackson.citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
When user wants to change entry in grub2 menu in pygrub, there's no
response in case of appending command line arguments ('a' key).
Append malfunction is caused by change of keyword used for kernel
record. Grub uses 'kernel' for line with linux kernel but grub2 uses
'linux' instead. This patch adds checking for both grub 1 and 2 keywords.
Signed-off-by: Miroslav Rezanina <mrezanin@redhat.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
When user wants to change entry in grub2 menu in pygrub, there
may be crash of pygrub in case of editing item ('e' key).
Crash on editing is caused longer entry list in case of grub2. As entry
window is 10 lines high, it can hold only 8 entries (2 lines for border).
Adding line outside of windows high causes crash. Patch add handling
for longer lists and scrolling through them.
Signed-off-by: Miroslav Rezanina <mrezanin@redhat.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
It has been hiding actual mistakes, and there are not too many changes
necessary to make things build without suppressing this warning.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Keir Fraser <keir@xen.org>
Replace
libxl__gc gc = LIBXL_INIT_GC(ctx);
...
libxl__free_all(&gc);
with
GC_INIT(ctx);
...
GC_FREE;
throughout with a couple of perl runes.
We must then adjust uses of the resulting gc for pointerness, which is
mostly just replacing all occurrences of "&gc" with "gc". Also a
couple of unusual uses of LIBXL_INIT_GC needed to be fixed up by hand.
Here are those runes:
perl -i -pe 's/\Q libxl__gc gc = LIBXL_INIT_GC(ctx);/ GC_INIT(ctx);/' tools/libxl/*.c
perl -i -pe 's/\Q libxl__free_all(&gc);/ GC_FREE;/' tools/libxl/*.c
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
libxl_internal.h now #includes libxl.h and various system headers.
This
1. makes the order of header inclusion more predictable
2. explicitly allows libxl_internal.h to use objects defined in libxl.h
3. removes the need for individual files to include these headers
Also
- remove some unnecessary #includes of libxl_utils.h,
flexarray.h, etc. in some libxl*.c files,
- include libxl_osdeps.h at the top of libxl_internal.h
- add missing includes of libxl_osdeps.h to a couple of files
- change libxl.h to libxl_internal.h in a couple of files
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Provide some macros which are useful shorthands for use within libxl:
* GC_INIT to initialise a gc from a ctx and GC_FREE to free it
* CTX(gc) to give you back the ctx
* LIBXL_TAILQ_INSERT_SORTED for inserting things into sorted lists
These will be used by later patches.
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
GCC and C99 allow declarations to be mixed with code. This is a good
idea because:
* It allows variables to be more often initialised as they are
declared, thus reducing the occurrence of uninitialised variable
errors.
* Certain alloca-like constructs (arrays allocated at runtime on the
stack) can more often be written without a spurious { } block.
Such blocks are confusing to read.
* It makes it easier to write and use macros which declare and
initialise formulaic variables and do other function setup code,
because there is no need to worry that such macros might be
incompatible with each other or have strict ordering constraints.
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Instead of generating:
typedef struct {
...
} libxl_foo;
Produce:
typedef struct libxl_foo {
...
} libxl_foo;
This makes it possible to refer to libxl idl-generated structs and
unions, as incomplete types, before they have been defined.
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
This provides for fields in libxl datatypes which are only present in
the C version of structures and are used only by libxl itself. This
is useful when a libxl datatype wants to contain fields which are used
by libxl internally and which are only present in the structure to
avoid additional memory allocation inconvenience.
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
We would like some linked list macros which are (a) well known to be
sane and (b) typesafe. BSD's queue.h meets these criteria.
We also provide some simple perlery to arrange to add the libxl_
namespace prefix to the macros. This will allow us to #include
_libxl_list.h in our public header file without clashing with anyone
else who is also using another version of queue.h.
(A note on copyright: The FreeBSD files we are adding have an
[L]GPL-compatible licence, so there is no need to change our COPYING.
Although FreeBSD's queue.3 still contains the advertising clause, this
has been withdrawn by UCB as recorded in the FreeBSD COPYRIGHT file,
which is included in tools/libxl/external/ for reference.)
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Ian Campbell <Ian.campbell@citrix.com>
Tested-by: Roger Pau Monne <roger.pau@entel.upc.edu>
Committed-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Event-driven programs want to wait until the xs_fileno triggers for
reading, and then repeatedly call xs_check_watch.
Also xs_read_watch exposes a useless "num" out parameter, which should
always (if things aren't going hideously wrong) be at least 2 and
which the caller shouldn't be interested in. So xs_check_watch
doesn't have one of those.
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
either GCC 4.6.1 or Ubuntu add -Werror=format-security to the -Wall set,
so libxl compilation breaks:
libxl_create.c: In function 'store_libxl_entry':
libxl_create.c:454:9: error: format not a string literal and no
format arguments [-Werror=format-security]
cc1: all warnings being treated as errors
Attached patch fixes this and another occurrence.
Patch from: Uwe Dannowski
Signed-off-by: Andre Przywara <andre.przywara@amd.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
Fix insufficient quoting between "tap-ctl list" and
xend/server/BlktapController.py
The "line.split(None, 4)" needs to be a "3", because 3 splits needs to
be done to get the 4 parts. Sorry for the mixup.
[ fix to 24335:3915bd95ade5. -iwj ]
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
This patch is used to prepare exposing PCID/INVPCID features to hvm
guest.
The specific exposure result depend on hvm paging mode (hap/shadow),
which would be handled at next patch.
Signed-off-by: Liu, Jinsong <jinsong.liu@intel.com>
Committed-by: Keir Fraser <keir@xen.org>
Do not expose the ACPI power management "_PS0/3" Method to guest
firmware. According to section 3.4 of the APCI specification 4.0, PCI
device control the device power through its own specification but not
through APCI.
Qemu pushes "_PS0/3" to guest will cause a mess between ACPI PM and
PCI PM as a result of incorrect ACPI table shipped with the guest
BIOS, it may cause a failure of PCI device PM state transition(from
PCI_UNKNOWN to PCI_D0).
Signed-off-by: Xudong Hao <xudong.hao@intel.com>
Signed-off-by: Haitao Shan <haitao.shan@intel.com>
Committed-by: Keir Fraser <keir@xen.org>
The 32-bit tools need to support 64-bit addresses, so use the correct
printf/scanf formats. Also, some systems declare fscanf with attribute
warn_unused_result, so check the result instead of relying on the
value of start being unmodified across a failed call.
Signed-off-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Committed-by: Keir Fraser <keir@xen.org>
Unfortunately a HID of PNP0A06 will not work for an existing client
driver so this patch aims to choose something that's pretty certain
not to class with anything else.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Committed-by: Keir Fraser <keir@xen.org>
This allows a PCI device and its associated resources to be labeled
without hardcoding addresses (which may change from system to system)
in the security policy.
Signed-off-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Committed-by: Keir Fraser <keir@xen.org>
The domU SID is never used before a policy load, and so does not
belong in the initial_sids list.
The PIRQ SID is now incorrectly named; it should simply be called IRQ.
Signed-off-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Committed-by: Keir Fraser <keir@xen.org>
The PHYSDEVOP_alloc_irq_vector hypercall is a noop, so its XSM check
is not useful. Remove it and the "event vector" FLASK permission.
Signed-off-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Committed-by: Keir Fraser <keir@xen.org>
Version 26 of checkpolicy (shipped with Fedora 16) now requires that
roles be declared prior to setting types for a role. Add a declaration
of the system_r role to fix the build of default XSM/FLASK policy.
Signed-off-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Committed-by: Keir Fraser <keir@xen.org>
Pushing stuff onto the stack on x86-64 when we do not specify
-mno-red-zone is unsafe. Since the complicated asm is due to register
pressure on i386, we simply implement an all-new simpler alternative
for x86-64.
Signed-off-by: Keir Fraser <keir@xen.org>
Acked-by: Jan Beulich <jbeulich@novell.com>
It's not really any more useful than explicitly setting new M2P
entries to the invalid value.
Signed-off-by: Tim Deegan <tim@xen.org>
Committed-by: Keir Fraser <keir@xen.org>
Supports the xl subcommand sched-sedf.
The man page is only a minimal version (copy from xm man page without
examples). BTW: the xm man page seems not to be in sync with xm sched-sedf -h
regarding the time units. I used milliseconds in the xl implementation.
Only minimal semantical checks of parameters.
Signed-off-by: juergen.gross@ts.fujitsu.com
Acked-by: Ian Jackson <ian.jackson.citrix.com>
Committed-by: Ian Jackson <ian.jackson.citrix.com>
Just a typo...
Signed-off-by: juergen.gross@ts.fujitsu.com
Acked-by: Ian Jackson <ian.jackson.citrix.com>
Committed-by: Ian Jackson <ian.jackson.citrix.com>
Supports the xl subcommand sched-credit2.
Signed-off-by: juergen.gross@ts.fujitsu.com
Acked-by: Ian Jackson <ian.jackson.citrix.com>
Committed-by: Ian Jackson <ian.jackson.citrix.com>
Adds cpupool awareness to output of xl sched-credit. Output can now be
restricted to a specific cpupool. The domains are printed for each cpupool
seperately.
The loop over cpupools and domains is seperated from the main command
implementation to be able to support other schedulers as well.
Signed-off-by: juergen.gross@ts.fujitsu.com
Acked-by: Ian Jackson <ian.jackson.citrix.com>
Committed-by: Ian Jackson <ian.jackson.citrix.com>
The help text of xl sched-credit supported long options. Neither the man page
nor the implementation did.
Signed-off-by: juergen.gross@ts.fujitsu.com
Acked-by: Ian Jackson <ian.jackson.citrix.com>
Committed-by: Ian Jackson <ian.jackson.citrix.com>
insufficient quoting between "tap-ctl list" and xend/server/BlktapController.py
BlktapController splits the output into lines using \n, then each line
at each space, and finally each of these 'words' at the '=', which
fails if the filename contains spaces.
As a quick work-around, the attached patch fixes the problem for me. That is,
until tap-ctl changes it's output format.
A more permanent solution would be to add proper quoting / escaping to tap-ctl
and un-quoting / de-escaping to BlktapController.py
Signed-off-by: Philipp Hahn <hahn@univention.de>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
There is currently no code in the kernel to trigger autoload of the
evtchn or gntdev drivers. Load them manually during xencommons start.
Handle both pvops and xenlinux module names.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
Currently xencommons prints an error that /proc/xen/capabilities does
not exist when started on a non-xen kernel.
Update the xencommons script to run only when needed:
- do not run if /proc/xen does not exist
- check if /proc/xen/capabilities exists before doing the grep for dom0
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
The notify offset and event channels are both unsigned variables, so
testing for >= 0 will not correctly detect the use of -1 to indicate
the field is unused. Remove the useless comparison and replace with
correct range checks or comparisons to -1.
Reported-by: Anil Madhavapeddy <anil@recoil.org>
Signed-off-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Ian Jackson <ian.jackson.citrix.com>
Committed-by: Ian Jackson <ian.jackson.citrix.com>
This command works in two steps. First, a fd is sent to QEMU through the QMP
socket. And then, the second command "migrate" use the fd previously sent to
ask QEMU to save its states.
This comes with an alternative qmp_send function that can send a fd.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Ian Jackson <ian.jackson.citrix.com>
Committed-by: Ian Jackson <ian.jackson.citrix.com>
This patch prepares for the next patch, that will introduce an
alternative send function.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Ian Jackson <ian.jackson.citrix.com>
Committed-by: Ian Jackson <ian.jackson.citrix.com>
Since libxc is re-entrant, there is no need for the OCaml bindings to
prevent more than one thread from entering libxc concurrently.
Previously, the OCaml bindings had prevented re-entrancy by not using
caml_{enter,leave}_blocking_section in the C stubs. The absence of
these calls meant that the global lock remained held during
hypercalls. This caused multi-threaded applications to completely lock
up during long-running hypercalls.
Calls to these functions were present but commented out in the OCaml
bindings some years ago when libxc was not fully re-entrant.
Instead, we now do call caml_{enter,leave}_blocking_section in all the
places it used to be commented out, meaning that the global lock is
released during those hypercalls. We also no longer assert the
XC_OPENFLAG_NON_REENTRANT flag when calling xc_interface_open because
the caller no longer does re-entrancy prevention at those places.
This patch has now gone through a XenRT nightly test; no problems were
observed.
Signed-off-by: Jonathan Davies <jonathan.davies@citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
Ian Campbell
Miroslav Rezanina
Jan Beulich
Ian Jackson
Andre Przywara
Philipp Hahn
Liu, Jinsong
Xudong Hao
Daniel De Graaf
Paul Durrant
Keir Fraser
Tim Deegan
Juergen Gross
Olaf Hering
Andres Lagar-Cavilla
Anthony PERARD
Jonathan Davies