Commit d275ec9c introduce ssize_t but not include relevant header,
it will cause compile errors just like below:
./include/xenctrl.h:1485: error: expected '=', ',', ';', 'asm' or
'__attribute__' before 'xc_version_len'
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Changlong Xie <xiecl.fnst@cn.fujitsu.com>
We change the xen_version libxc code to use the new hypercall.
Which of course means every user in the code base has to
be changed over.
It is important to note that the xc_version_op has a different
return semantic than the previous one. It returns negative
values on error (like the old one), but it also returns
an positive value on success (unlike the old one). The positive
value is the number of bytes copied in.
Note that both Ocaml and xenstat use tabs instead of four
spaces so they look quite odd.
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Tested-by: Andrew Cooper <andrew.cooper3@citrix.com> [for the Ocaml stubs]
Acked-by: George Dunlap <george.dunlap@eu.citrix.com> [xenctx bits]
Acked-by: Wei Liu <wei.liu2@citrix.com>
xc_mem_access_enable_emulate() and xc_mem_access_disable_emulate()
are currently no-ops, that is all they do is set a flag that
nobody else checks. The user can already set the EMULATE flags in
the vm_event response if emulation is desired, and having an extra
check above that is not inherently safer, but it does complicate
(currenly unnecessarily) the API. This patch removes these
functions and the corresponding hypervisor code.
Signed-off-by: Razvan Cojocaru <rcojocaru@bitdefender.com>
Acked-by: Tamas K Lengyel <tamas@tklengyel.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Currently in ioreq server, guest write-protected ram pages are
tracked in the same rangeset with device mmio resources. Yet
unlike device mmio, which can be in big chunks, the guest write-
protected pages may be discrete ranges with 4K bytes each. This
patch uses a seperate rangeset for the guest ram pages.
To differentiate the ioreq type between the write-protected memory
ranges and the mmio ranges when selecting an ioreq server, the p2m
type is retrieved by calling get_page_from_gfn(). And we do not
need to worry about the p2m type change during the ioreq selection
process.
Note: Previously, a new hypercall or subop was suggested to map
write-protected pages into ioreq server. However, it turned out
handler of this new hypercall would be almost the same with the
existing pair - HVMOP_[un]map_io_range_to_ioreq_server, and there's
already a type parameter in this hypercall. So no new hypercall
defined, only a new type is introduced.
Signed-off-by: Shuai Ruan <shuai.ruan@linux.intel.com>
Signed-off-by: Yu Zhang <yu.c.zhang@linux.intel.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Paul Durrant <paul.durrant@citrix.com>
This is used only for xc_evtchn_alloc_unbound and the legacy/compat
versions of the old interfaces and avoids redefining the typedef. The
evtchn_port_or_error_t name is now used only be libxenevtchn.
None of the callers of xc_evtchn_alloc_unbound use the type
themselves.
NB xc_evtchn_alloc_unbound differs from xc_evtchn_bind_unbound_port
and the underlying xenevtchn_bind_unbound_port in that it allows the
specification of the local domain rather than assuming self. This is
only useful during domain build.
Reported-by: Olaf Hering <olaf@aepfle.de>
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
libxenforeignmemory will provide a stable API and ABI for mapping
foreign domain memory (subject to appropriate privileges).
The new library exposes an interface equivalent to
xc_map_foreign_memory_bulk, which all the other
xc_map_foreign_memory_* functions (which remain in libxc) are
implemented in terms of.
Upon request (via #define XC_WANT_COMPAT_MAP_FOREIGN_API) libxenctrl
will provide a compat API for the old names. This is used by qemu-xen
and qemu-trad as well as various in tree things (which required
de-dupping various #includes in some too to get the #define before the
first).
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
[ ijc -- updated MINIOS_UPSTREAM_REVISION and QEMU_TRADITIONAL_REVISION ]
It can trivially be replaced by xc_map_foreign_pages which is the
interface I want to move to going forward (by standardising on _bulk
but handling err=NULL as _pages does).
The callers of _batch are checking a mixture of a NULL return or
looking to see if the top nibble of the (usually sole) mfn they pass
has been modified to be non-zero to detect errors. _pages never
modifies the mfn it was given (it's const) and returns NULL on
failure, so adjust the error handling where necessary. Some callers
use a copy of the mfn array, for reuse on failure with _batch, which
is no longer necessary as _pages doesn't modify the array, however I
haven't cleaned that up here.
This reduces the twist maze of xc_map_foreign_* by one, which will be
useful when trying to come up with an underlying stable interface.
NetBSD and Solaris implemented xc_map_foreign_bulk in terms of
xc_map_foreign_batch via a compat layer, so xc_map_foreign_batch
becomes an internal osdep for them.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: George Dunlap <george.dunlap@citrix.com>
Cc: George Dunlap <george.dunlap@eu.citrix.com>
The alternative backend (a xen-api/xapi shim) is no longer around and
so this stuff is now just baggage which is getting in the way of
refactoring libxenctrl.
Nested virt probably suffices for this use case now.
This was the last component of the osdep infrastructure, so all the
dynamic loading etc stuff all falls away too.
As part of this I was forced to investigate the twisty
xc_map_foreign_* maze, which I have added to the
toolstack-library-apis doc in the hopes of doing something sensible.
NetBSD and Solaris now call xc_map_foreign_bulk_compat directly from
their xc_map_foreign_bulk, which could have been achieved by using
some ifdefs around a renamed function. This will fall out in the wash
when these functions move to their own library.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: David Scott <dave.scott@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
libxengnttab will provide a stable API and ABI for accessing the
grant table devices.
The functions are moved into the xengnt{tab,shr} namespace to make a
clean break from libxc and avoid ambiguity regarding which interfaces
are stable.
All in-tree users are updated to use the new names.
Upon request (via #define XC_WANT_COMPAT_GNTTAB_API) libxenctrl will
provide a compat API for the old names. This is used by qemu-xen for
the time being. qemu-xen-traditional is updated in lockstep.
This leaves a few grant table related functions which go via privcmd
(GNTTABOP) rather than ioctls on the /dev/xen/gnt* devices in
libxenctrl. Specifically:
- xc_gnttab_get_version
- xc_gnttab_map_table_v1
- xc_gnttab_map_table_v2
- xc_gnttab_op
These functions do not appear to be needed by qemu-dm, qemu-pv
(provision of device model to HVM guests and PV backends respectively)
or by libvchan suggesting they are not needed by non-toolstack uses of
event channels.
The new library uses a version script to ensure that only expected
symbols are exported and to version them such that ABI guarantees can
be kept in the future.
After this change libxenvchan no longer needs to link against
libxenctrl. It still needs xenctrl.h in one file for xen_mb and
friends.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
[ ijc -- updated MINIOS_UPSTREAM_REVISION and QEMU_TRADITIONAL_REVISION ]
The alternative backend (a xen-api/xapi shim) is no longer around and
so this stuff is now just baggage which is getting in the way of
refactoring libxenctrl.
Nested virt probably suffices for this use case now.
It is now necessary to provide explicit versions of things for
platforms which do not implement this functionality, since the osdep
dispatcher cannot fulfil this need any more. These are provided by
appropriate xc_nognt???.c files which are compiled and linked on the
appropriate platforms. In them open and close return failure and
everything else aborts, since if open fails they should never be
called.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
libxenevtchn will provide a stable API and ABI for accessing the
evtchn device.
The functions are moved into the xenevtchn namespace to make a clean
break from libxc and avoid ambiguity regarding which interfaces are
stable.
All in-tree users are updated to use the new names.
Upon request (via #define XC_WANT_COMPAT_EVTCHN_API) libxenctrl will
provide a compat API for the old names. This is used by qemu-xen for
the time being. qemu-xen-traditional is updated in lockstep.
This leaves a few event channel related functions which go via privcmd
(EVTCHNOP) rather than ioctls on the /dev/xen/evtchn device in
libxenctrl. Specifically:
- xc_evtchn_alloc_unbound
- xc_evtchn_reset
- xc_evtchn_status
Note that xc_evtchn_alloc_unbound's functionality is also provided by
xenevtchn_bind_unbound_port() (née xc_evtchn_bind_unbound_port) and is
probably redundant.
These functions do not appear to be needed by qemu-dm, qemu-pv
(provision of device model to HVM guests and PV backends respectively)
or by libvchan suggesting they are not needed by non-toolstack uses of
event channels. QEMU does use these in hw/xenpv/xen_domainbuild.c but
that is a "toolstack use".
The new library uses a version script to ensure that only expected
symbols are exported and to version them such that ABI guarantees can
be kept in the future.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
[ ijc -- updated MINIOS_UPSTREAM_REVISION and QEMU_TRADITIONAL_REVISION ]
The alternative backend (a xen-api/xapi shim) is no longer around and
so this stuff is now just baggage which is getting in the way of
refactoring libxenctrl.
Note that the intention is to move this into a separate library
shortly.
Nested virt probably suffices for this use case now.
One incorrect instance of using xc_interface where xc_evtchn (in ocaml
stubs) is removed, this used to work because they were typedefs to the
same struct, but is no longer permitted.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Support the xenstore domain flag for obtaining domain info.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
With the addition of HVMlite the hypervisor now always requires a non-null
arch domain config, which is different between HVM and PV guests.
Add a new parameter to xc_domain_create that contains a pointer to an arch
domain config. If the pointer is null, create a default arch domain config
based on guest type.
Fix all the in-tree callers to provide a null arch domain config in order to
mimic previous behaviour.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
This is the xl/xc changes to support Intel Code/Data Prioritization.
CAT xl commands to set/get CBMs are extended to support CDP.
Add new CDP options with CAT commands in xl interface man page.
Add description of CDP in xl-psr.markdown.
Signed-off-by: He Chen <he.chen@linux.intel.com>
Reviewed-by: Chao Peng <chao.p.peng@linux.intel.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Reviewed-by: Wei Liu <wei.liu2@citrix.com>
Previously, if vm_event emulation support was enabled, then REP
optimizations were disabled when emulating REP-compatible
instructions. This patch allows fine-tuning of this behaviour by
providing a dedicated libxc helper function.
Signed-off-by: Razvan Cojocaru <rcojocaru@bitdefender.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
And use it almost everywhere. It is easy to use it for the
sysctl since the hypervisor and toolstack are intertwined.
But for the tmem hypercall we need to be dilligient (as it
is guest facing) so delaying that to another patch:
"tmem: Use 'struct xen_tmem_oid' for every user" to help
with bisection issues.
We also move some of the parameters on functions to be within
the right location.
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Acked-by: Jen Beulich <jbeulich@suse.com>
It mentions it but it is never used. The hypercall interface
knows nothing of this sort of thing either. Lets just remove it.
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Acked-by: Wei Liu <wei.liu2@citrix.com> [release + toolstack]
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
As recommended in http://www.gnu.org/licenses/gpl-howto.en.html.
This is the result of:
$ git grep -El Mass\|Temple\|Franklin | xargs ./fsf.pl
Where fsf.pl is:
#!/usr/bin/perl -w -pi.bak -0777
my $repl = 'If not, see <http://www.gnu.org/licenses/>.';
my $br = qr/(?:\s*\n\s*(?:[\*\#]|\/\/|\.\\" )?\s*|\s+)/;
my $inwt = qr/[Ii]f${br}not,${br}write${br}(?:to${br})?the${br}Free${br}Software${br}Foundation,(?:${br}Inc\.,)?/;
my $mass = qr/675${br}Mass${br}Ave,?${br}Cambridge,?${br}MA${br}02139,?${br}USA,?\.?/;
my $franklin = qr/51${br}Franklin${br}St(?:reet)?(?:,${br}| - )Fifth${br}Floor,?${br}Boston,?${br}MA,?${br}02110-1301,?${br}USA,?\.?/;
my $temple = qr/59${br}Temple${br}Place(?:,${br}| - )Suite${br}330,?${br}Boston,?${br}MA,?${br}021110?-1307,?${br}USA,?\.?/;
s|$inwt$br$mass|$repl|m;
s|$inwt$br$franklin|$repl|m;
s|$inwt$br$temple|$repl|m;
The only remaining mentions of these addresses are in COPYING files which I
haven't touched.
Some of the changed files are imports from elsewhere, however
filtering them out is tricky, I think it is tolerable to have these
files be modified here and then perhaps reverted on the next sync,
since it's only 1-2 lines and obvious what is going on.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Added support for a new class of vm_events: VM_EVENT_REASON_REQUEST,
sent via HVMOP_request_vm_event. The guest can request that a
generic vm_event (containing only the vm_event-filled guest registers
as information) be sent to userspace by setting up the correct
registers and doing a VMCALL. For example, for a 32-bit guest, this
means: EAX = 34 (hvmop), EBX = 24 (HVMOP_guest_request_vm_event),
ECX = 0 (NULL required for the hypercall parameter, reserved).
Signed-off-by: Razvan Cojocaru <rcojocaru@bitdefender.com>
Acked-by: Tamas K Lengyel <tlengyel@novetta.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Acked-by: George Dunlap <george.dunlap@eu.citrix.com>
Release-acked-by: Wei Liu <wei.liu2@citrix.com>
This is the xc/xl changes to support Intel Cache Allocation
Technology(CAT).
'xl psr-hwinfo' is updated to show CAT info and two new commands
for CAT are introduced:
- xl psr-cat-cbm-set [-s socket] <domain> <cbm>
Set cache capacity bitmasks(CBM) for a domain.
- xl psr-cat-show <domain>
Show CAT domain information.
Examples:
[root@vmm-psr vmm]# xl psr-hwinfo --cat
Cache Allocation Technology (CAT):
Socket ID : 0
L3 Cache : 12288KB
Maximum COS : 15
CBM length : 12
Default CBM : 0xfff
[root@vmm-psr vmm]# xl psr-cat-cbm-set 0 0xff
[root@vmm-psr vmm]# xl psr-cat-show
Socket ID : 0
L3 Cache : 12288KB
Default CBM : 0xfff
ID NAME CBM
0 Domain-0 0xff
Signed-off-by: Chao Peng <chao.p.peng@linux.intel.com>
Reviewed-by: Dario Faggioli <dario.faggioli@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
The number of slots per page being 511 (i.e. not a power of two) means
that the (32-bit) read and write indexes going beyond 2^32 will likely
disturb operation. Extend I/O req server creation so the caller can
indicate that it is using suitable atomic accesses where needed (not
all accesses to the two pointers really need to be atomic), allowing
the hypervisor to atomically canonicalize both pointers when both have
gone through at least one cycle.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
As suggested by Andrew Cooper, this patch attempts to remove
some redundancy and allow for an easier time when adding vm_events
for new control registers in the future, by having a single
VM_EVENT_REASON_WRITE_CTRLREG vm_event type, meant to serve CR0,
CR3, CR4 and (newly introduced) XCR0. The actual control register
will be deduced by the new .index field in vm_event_write_ctrlreg
(renamed from vm_event_mov_to_cr).
Signed-off-by: Razvan Cojocaru <rcojocaru@bitdefender.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Tim Deegan <tim@xen.org>
Said commit ("libxl_set_memory_target: retain the same maxmem offset on
top of the current target") caused a regression for "xl mem-set"
against Dom0: While prior to creation of the first domain this works,
the first domain creation involving ballooning breaks. Due to "enforce"
not being set in the domain creation case, and due to Dom0's initial
->max_pages (in the hypervisor) being UINT_MAX, the calculation of
"memorykb" in the first "xl mem-set" adusting the target upwards
subsequent to domain creation and termination may cause an overflow,
resulting in Dom0's maximum getting to a very small value. This small
maximum will the make the subsequent setting of the PoD target fail.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
When we use a DECLARE_HYPERCALL_BUFFER_SHADOW it defines a user
pointer '_name' and a shadow xc_hypercall_buffer_t.
When calling xc_hypercall_buffer_free_pages(_xch, _name, _nr),
the complier will report '_name' unused error, because
xc_hypercall_buffer_free_pages() is a MACRO and '_name' is
transparently converted to the hypercall buffer. it confuses
the caller because xc_hypercall_buffer_free_pages() looks
like a function and takes '_name' as an arg.
Add an if check to let the compiler think we are actually
using the argument '_name'.
Signed-off-by: Yang Hongyang <yanghy@cn.fujitsu.com>
CC: Ian Campbell <Ian.Campbell@citrix.com>
CC: Ian Jackson <Ian.Jackson@eu.citrix.com>
CC: Wei Liu <wei.liu2@citrix.com>
CC: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Ian Campbell <Ian.Campbell@citrix.com>
[ ijc -- some rewording of the commit message ]
There are cases where we only need to use the hypercall buffer data,
and do not use the xc_hypercall_buffer_t struct.
DECLARE_HYPERCALL_BUFFER_SHADOW defines a user pointer that can allow
us to access the hypercall buffer data but it also defines a
xc_hypercall_buffer_t that we don't use, the compiler will report arg
unused error.
Add __attribute__((unused)) before xc_hypercall_buffer_t to avoid
the compiler error.
Example cases:
In send_all_pages(), we only need to use the hypercall buffer data
which is a dirty bitmap, we set the dirty bitmap to all dirty and call
send_dirty_pages, we will not use the xc_hypercall_buffer_t and hypercall
to retrieve the dirty bitmap.
In send_some_pages(), we will also only need to use the dirty_bitmap.
the retrieve dirty bitmap hypercall are done by the caller.
Signed-off-by: Yang Hongyang <yanghy@cn.fujitsu.com>
CC: Ian Campbell <Ian.Campbell@citrix.com>
CC: Ian Jackson <Ian.Jackson@eu.citrix.com>
CC: Wei Liu <wei.liu2@citrix.com>
CC: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Ian Campbell <Ian.Campbell@citrix.com>
.. and use this new interface to display it along with CPU topology
and NUMA information when 'xl info -n' command is issued
The output will look like
...
cpu_topology :
cpu: core socket node
0: 0 0 0
...
device topology :
device node
0000:00:00.0 0
0000:00:01.0 0
...
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Add set_xen_guest_handle_offset() macro that can be used for setting
xen_guest_handle to an offset into hypercall buffer.
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
xc_numainfo() is not expected to be used on a hot path and therefore
hypercall buffer management can be pushed into libxc. This will simplify
life for callers.
Also update error logging macros.
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
xc_cputopoinfo() is not expected to be used on a hot path and therefore
hypercall buffer management can be pushed into libxc. This will simplify
life for callers.
Also update error reporting macros.
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
A device node is described by a path. It will be used to retrieve the
node in the device tree and assign the related device to the domain.
Only non-PCI devices protected by an IOMMU can be assigned to a guest.
Also document the behavior of XEN_DOMCTL_deassign_device in the public
headers which differ between non-PCI and PCI.
Signed-off-by: Julien Grall <julien.grall@linaro.org>
Acked-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Cc: Wei Liu <wei.liu2@citrix.com>
On x86, an IRQ is assigned in 2 steps to an HVM guest:
- The toolstack is calling PHYSDEVOP_map_pirq in order to create a
guest PIRQ (IRQ bound to an event channel)
- The emulator (QEMU) is calling DOMCTL_bind_pt_irq in order to
bind the IRQ
On ARM, there is no concept of PIRQ as the IRQ can be assigned to a
virtual IRQ using the interrupt controller.
It's not clear if we will need 2 different hypercalls on ARM to assign
IRQ and, for now, only the toolstack will manage IRQ.
In order to avoid re-using a fixed ABI hypercall (PHYSDEVOP_*) for a
different purpose and allow us more time to figure out the right out,
only DOMCTL_{,un}bind_pt_pirq is implemented on ARM.
The DOMCTL is extended with a new type PT_IRQ_TYPE_SPI and only IRQ ==
vIRQ (i.e machine_irq == spi) is supported.
In order to keep the same XSM checks done by the 2 hypercalls on x86,
call both xsm_map_domain_irq & xsm_bind_pt_irq in the ARM implementation.
Note: The toolstack changes for routing an IRQ to a guest will be done
in a separate patch.
Signed-off-by: Julien Grall <julien.grall@linaro.org>
Acked-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Cc: Jan Beulich <jbeulich@suse.com>
xentrace is the only caller at the moment. Split the cpu and event
mask setting out into seperate functions, but leave the current limit
of 32 bits for masks passed in from the command-line.
Based on a patch from Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: George Dunlap <george.dunlap@eu.citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
We export the xc_cpumap_alloc but not the bit operations.
One could include 'xc_bitops.h' but that is naughty - so instead
we just export the proper functions to do it on the xc_cpumap_t
typedef.
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
----
v2: Use our own macro to make sure ARM is not affected negatively
v3: Lifted Ian's explanation.
Thus far mem_access and mem_sharing memops had been able to signal
to Xen to start pulling responses off the corresponding rings. In this patch
we retire these memops and add them to the option to the vm_event_op domctl.
The vm_event_op domctl suboptions are the same for each ring thus we
consolidate them into XEN_VM_EVENT_ENABLE/DISABLE/RESUME.
As part of this patch in libxc we also rename the mem_access_enable/disable
functions to monitor_enable/disable and move them into xc_monitor.c.
Signed-off-by: Tamas K Lengyel <tamas.lengyel@zentific.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Tim Deegan <tim@xen.org>
Chong Li
Wei Liu
Olaf Hering
Konrad Rzeszutek Wilk
Changlong Xie
Jan Beulich
Razvan Cojocaru
Shuai Ruan
Ian Campbell
Juergen Gross
Roger Pau Monne
He Chen
Vitaly Kuznetsov
Tamas K Lengyel
Julien Grall
Tiejun Chen
Chao Peng
Dario Faggioli
Yang Hongyang
Boris Ostrovsky
Julien Grall
Andrew Cooper
George Dunlap
Tamas K Lengyel