libxencall will provide a stable API and ABI for calling hypercalls
(although those hypercalls themselves may not have a stable API). As
well as the hypercall buffer infrastructure needed in order to safely
provide pointer arguments to hypercalls.
libxenctrl encapsulates a instance of this interface, so users of that
library are not currently subjected to any actual changes. However all
hypercalls made internally by libxc now use the correct interface. It
is expected that most users of this library will be other libraries
providing a higher level interface, rather than applications directly.
Only the basic functionality to allocate hypercall safe memory is
moved, the type safe stuff and bounce buffers remain in libxc.
Note that the functionality to map foreign pages using privcmd is not
yet moved, meaning that an xc_interface will now contain two open
privcmd file descriptors. Foreign memory mapping is logically separate
functionality and will be moved into its own library.
The new library uses a version script to ensure that only expected
symbols are exported and to version them such that ABI guarantees can
be kept in the future.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
[ ijc -- updated MINIOS_UPSTREAM_REVISION and QEMU_TRADITIONAL_REVISION ]
As recommended in http://www.gnu.org/licenses/gpl-howto.en.html.
This is the result of:
$ git grep -El Mass\|Temple\|Franklin | xargs ./fsf.pl
Where fsf.pl is:
#!/usr/bin/perl -w -pi.bak -0777
my $repl = 'If not, see <http://www.gnu.org/licenses/>.';
my $br = qr/(?:\s*\n\s*(?:[\*\#]|\/\/|\.\\" )?\s*|\s+)/;
my $inwt = qr/[Ii]f${br}not,${br}write${br}(?:to${br})?the${br}Free${br}Software${br}Foundation,(?:${br}Inc\.,)?/;
my $mass = qr/675${br}Mass${br}Ave,?${br}Cambridge,?${br}MA${br}02139,?${br}USA,?\.?/;
my $franklin = qr/51${br}Franklin${br}St(?:reet)?(?:,${br}| - )Fifth${br}Floor,?${br}Boston,?${br}MA,?${br}02110-1301,?${br}USA,?\.?/;
my $temple = qr/59${br}Temple${br}Place(?:,${br}| - )Suite${br}330,?${br}Boston,?${br}MA,?${br}021110?-1307,?${br}USA,?\.?/;
s|$inwt$br$mass|$repl|m;
s|$inwt$br$franklin|$repl|m;
s|$inwt$br$temple|$repl|m;
The only remaining mentions of these addresses are in COPYING files which I
haven't touched.
Some of the changed files are imports from elsewhere, however
filtering them out is tricky, I think it is tolerable to have these
files be modified here and then perhaps reverted on the next sync,
since it's only 1-2 lines and obvious what is going on.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
.. and use this new interface to display it along with CPU topology
and NUMA information when 'xl info -n' command is issued
The output will look like
...
cpu_topology :
cpu: core socket node
0: 0 0 0
...
device topology :
device node
0000:00:00.0 0
0000:00:01.0 0
...
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
xc_numainfo() is not expected to be used on a hot path and therefore
hypercall buffer management can be pushed into libxc. This will simplify
life for callers.
Also update error logging macros.
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
xc_cputopoinfo() is not expected to be used on a hot path and therefore
hypercall buffer management can be pushed into libxc. This will simplify
life for callers.
Also update error reporting macros.
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
We export the xc_cpumap_alloc but not the bit operations.
One could include 'xc_bitops.h' but that is naughty - so instead
we just export the proper functions to do it on the xc_cpumap_t
typedef.
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
----
v2: Use our own macro to make sure ARM is not affected negatively
v3: Lifted Ian's explanation.
A number of changes to XEN_SYSCTL_topologyinfo interface:
* Instead of copying data for each field in xen_sysctl_topologyinfo separately
put cpu/socket/node into a single structure and do a single copy for each
processor.
* A NULL cputopo handle passed is a request for maximum number of CPUs
(num_cpus). If cputopo is valid and num_cpus is smaller than the number of
CPUs in the system then -ENOBUFS is returned (and correct num_cpus is provided)
* Do not use max_cpu_index, which is almost always used for calculating number
CPUs (thus requiring adding or subtracting one), replace it with num_cpus.
* There is no need to copy whole op in sysctl to user at the end, we only need
num_cpus.
* Rename xen_sysctl_topologyinfo and XEN_SYSCTL_topologyinfo to reflect the fact
that these are used for CPU topology. Subsequent patch will add support for
PCI topology sysctl.
* Replace INVALID_TOPOLOGY_ID with "XEN_"-prefixed macros for each invalid type
(core, socket, node).
Update sysctl version to 0x0000000C
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
If max_elem is not zero then hypervisor's spinlock_profile_ucopy_elem()
will attempt to copy profile data into user's data buffer. Since this
buffer is explicitly set to (the equivalent of) NULL the copy will fail,
causing xenlockprof to fail as well.
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Remove xc_hvm_[sg]et_mem_access() APIs which have been replaced by
xc_[sg]_mem_access() APIs.
Signed-off-by: Aravindh Puthiyaparambil <aravindp@cisco.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
c/s 2e82c18cd8 changed the error returns of
xc_get_{cpu,node}map_size() to now include returning -1. This invalidated the
error checks from callers, which expected 0 to be the only error case.
Coverity ID: 1135907 1135908 1135909 1135910 1135911 1135912 1135913 1135914
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Ian Campbell <Ian.Campbell@citrix.com>
CC: Ian Jackson <Ian.Jackson@eu.citrix.com>
CC: George Dunlap <george.dunlap@eu.citrix.com>
In libxc, make xc_get_max_{cpus,node}() always return either a
positive number or -1, and change all the callers to deal with
that.
In libxl, make libxl_get_max_{cpus,nodes}() always return either a
positive number or a libxl error code. Thanks to that, it is also
possible to fix loggig for libxl_{cpu,node}_bitmap_alloc(), which
now happens inside the functions themselves, more accurately
reporting what happened.
Signed-off-by: Dario Faggioli <dario.faggioli@citrix.com>
Acked-by: George Dunlap <george.dunlap@eu.citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
The emacs variable to set the C style from a local variable block is
c-file-style, not c-set-style.
Signed-off-by: David Vrabel <david.vrabel@citrix.com
Make some NUMA node information available to the toolstack. Achieve
this by means of xc_numainfo(), which exposes memory size and amount
of free memory of each node, as well as the relative distances of
each node to all the others.
For properly exposing distances we need the IDL to support arrays.
Signed-off-by: Dario Faggioli <dario.faggioli@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Ian Campbell <ian.campbell@citrix.com>
* Creates HVMOPs for setting and getting memory access. The hypercalls
can set individual pages or the default access for new/refreshed
pages.
* Added functions to libxc to access these hypercalls.
Signed-off-by: Joe Epstein <jepstein98@gmail.com>
Reviewed-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Keir Fraser <keir@xen.org>
Acked-by: Tim Deegan <Tim.Deegan@citrix.com>
Now that this file exists it is a better home for these than xc_misc.c
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Ian Jackson <ian.jackson.citrix.com>
The size should be in bytes not 32-bit words. Fixes graphics
corruption issues for HVM guests due to bouncing too little data.
Also the dirty_bitmap buffer is output only and therefore only needs
bouncing in one direction.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Cpumap types in tools (libxc and libxl) are changed to be based on bytes like
in the interface to the hypervisor.
To make handling easier the size of used cpumaps is always based on the
number of physical cpus supported by the hypervisor. This eliminates the need
to keep track of the cpumap size in external interfaces.
In libxl a macro for cycling through a cpumap is added (libxl_for_each_cpu).
Interfaces changed:
libxl_set_vcpuaffinity()
libxl_cpumap_alloc()
xc_vcpu_setaffinity()
xc_vcpu_getaffinity()
xc_cpupool_freeinfo()
Signed-off-by: Juergen Gross <juergen.gross@ts.fujitsu.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
To be able to support arbitrary numbers of physical cpus it was necessary to
include the size of cpumaps in the xc-interfaces for cpu pools.
These were:
definition of xc_cpupoolinfo_t
xc_cpupool_getinfo()
xc_cpupool_freeinfo()
xc_cpupool_getinfo() and xc_cpupool_freeinfo() are changed to allocate the
needed buffer and return it.
Signed-off-by: juergen.gross@ts.fujitsu.com
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Current function has heavily overloaded semantics for the various
arguments. Separate out into more specific functions.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Current function has heavily overloaded semantics for the various
arguments. Separate out into more specific functions.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
We want the size of the struct not the pointer (although rounding up
to page size in lock_pages probably saves us).
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
The double indirection has been unnecessary since 9867:ec61a8c25429,
there is no possibility of the buffer being reallocated now.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Not actually used here but useful to confirm that a handle is passed
down to each location where it will be required once we switch to
hypercall buffers.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
# User Ian Campbell <ian.campbell@citrix.com>
# Date 1282671421 -3600
# Node ID d1dd29a470ef1b9d2c77478a123326036dfe90bb
# Parent d7a4adad9c328decbd384d87b23001aea8951b86
tools/libxc, tools/libelf: Relicense under LGPL v2.1
Relicense these two libraries under LGPL v2.1 only except where
individual files already included the "or later" provision.
Copyright holders have been contacted by Stephen Spector and have all
agreed this change.
Removed tools/libxc/ia64/aclinux.h since it appeared to be
unused. There is a separate, more up to date, copy in
xen/include/acpi/platform/aclinux.h which does appear to be used.
Clarify the license of MiniOS privcmd.h under the same terms as other
tools/include/xen-sys headers.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Stephen Spector <stephen.spector@citrix.com>
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Previously, the code was inconsistent: some calls to PERROR passed \n
and some did not. With the new logging arrangements, passing \n is
definitely incorrect.
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
This patch eliminate the global variables in libxenctrl (used for
logging and error reporting).
Instead the information which was in the global variables is now in a
new xc_interface* opaque structure, which xc_interface open returns
instead of the raw file descriptor; furthermore, logging is done via
xentoollog.
There are three new parameters to xc_interface_open to control the
logging, but existing callers can just pass "0" for all three to get
the old behaviour.
All libxc callers have been adjusted accordingly.
Also update QEMU_TAG for corresponding qemu change.
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
'xm info' command now also gives the cpu topology & host numa
information. This will be later used to build guest numa support. The
patch basically changes physinfo sysctl, and adds topology_info &
numa_info sysctls, and also changes the python & libxc code
accordingly.
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Using a function, and then declaring it weak later, has undefined
behaviour:
cc1: warnings being treated as errors
xc_misc.c:388: error: weak declaration of 'xc_map_foreign_bulk'
after first use results in unspecified behavior
So swap the functions xc_map_foreign_pages and xc_map_foreign_bulk.
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
This is mainly for software trigger MCE operation, so that test suites
can trigger software MCE.
Signed-off-by: Jiang, Yunhong <yunhong.jiang@intel.com>
Just like the kernel, the fallback implementation of
xc_map_foreign_bulk() should clear the error indication array upon
success.
Also, a few allocations were needlessly using calloc() instead of
malloc().
Finally, in xc_domain_save() allocate the error indicator array once
(along with the other arrays) instead of using realloc() (without
error checking) in the loop body.
Signed-off-by: Jan Beulich <jbeulich@novell.com>
Allow certain performance-critical hypercall wrappers to register data
buffers via a new interface which allows them to be 'bounced' into a
pre-mlock'ed page-sized per-thread data area. This saves the cost of
mlock/munlock on every such hypercall, which can be very expensive on
modern kernels.
Signed-off-by: Keir Fraser <keir.fraser@citrix.com>
Replace all calls to xc_map_foreign_batch() where the caller doesn't
look at the passed in array to check for errors by calls to
xc_map_foreign_pages(). Replace all remaining calls by such to the
newly introduced xc_map_foreign_bulk().
As a sideband modification (needed while writing the patch to ensure
they're unused) eliminate unused parameters to
uncanonicalize_pagetable() and xc_map_foreign_batch_single(). Also
unmap live_p2m_frame_list earlier in map_and_save_p2m_table(),
reducing the peak amount of virtual address space required.
All supported OSes other than Linux continue to use the old ioctl for
the time being.
Also change libxc's MAJOR to 4.0 to reflect the API change.
Signed-off-by: Jan Beulich <jbeulich@novell.com>
hypervisor about memory changes.
The impact on disk performance is typically making it from 71.5MBps
down to 70.5Mbps during the live migration. The impact on network
performance is actually even hard to measure.
Signed-off-by: Samuel Thibault <samuel.thibault@eu.citrix.com>
This adds a new HVM op that enables tracking dirty bits of a range of
video RAM. The idea is to optimize just for the most common case
(only one guest mapping, with sometimes some temporary other
mappings), which permits to keep the overhead on shadow as low as
possible.
Signed-off-by: Samuel Thibault <samuel.thibault@eu.citrix.com>
Ian Campbell
Boris Ostrovsky
Konrad Rzeszutek Wilk
Aravindh Puthiyaparambil
Andrew Cooper
Dario Faggioli
David Vrabel
Dario Faggioli
Keir Fraser
Xudong Hao
Wei Liu
Joe Epstein
Jan Beulich
Juergen Gross
Keir Fraser
Keir Fraser