Running "make uninstall" does not remove all installed files, a
situation which might cause link related issues if xen is re-installed
in a different location.
In order to make uninstall correctly remove the files it is best
the process should be done recursively by mirroring each "install"
target with an "uninstall" who removes the installed files.
An exception to this rule is uninstalling the files produced by
"qemu-xen-dir-remote" and "qemu-xen-traditional-dir", which are external
to the project. These projects do not implement an "uninstall" target so
the files have to be removed manually.
Signed-off-by: Petre Pircalabu <ppircalabu@bitdefender.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Add configuration entries to sysconfig.xencommons for selection of the
xenstore type (domain or daemon) and start the selected xenstore
service via a script called from sysvinit or systemd.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
On a system with systemd the xenstore sockets are created via systemd.
Remove the related configuration files in order to be able to decide
at runtime whether the sockets should be created or not. This will
enable Xen to start xenstore either via a daemon or via a stub domain.
As the xenstore domain start program will exit after it has done its
job prepare the same behaviour to be tolerated by systemd for the
xenstore daemon by specifying the appropriate flags in the service
file.
A rerun of autogen.sh is required.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: David Scott <dave@recoil.org>
Having DefaultDependencies=no means it can be started before / is
remounted read-write, which will result in various failures (to start
with opening the log).
Since "libxl: trigger attach events for devices attached before xl devd
startup" it is no longer important to start it as early as possible,
because it will process devices created before its startup.
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Cc: Wei Liu <wei.liu2@citrix.com>
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
A dedicated Xen driver domain init service starts "xl devd" in domU. But
currently, it is only supplied in the form of a SysV init script, which
systemd users run through a backward compatiblity wrapper automatically
generated by systemd-sysv-generator. This patch adds a (naturally more
lightweight) native systemd unit to be used instead.
The xendriverdomain service is only relevant to domU, but should not run
in dom0. Therefore, the systemd unit uses "ConditionVirtualization=xen",
which evaluates to true in domU and (since systemd version 214, released
on 2014-06-11) to false in dom0. Users or distributors who need to be
compatible with even older systemd versions, but still want to prevent
"xl devd" startup in dom0, could add the following line in [Service]:
ExecStartPre=/bin/sh -c "! grep -q control_d /proc/xen/capabilities"
(Please rerun autogen.sh after applying this patch)
Signed-off-by: Rusty Bird <rustybird@openmailbox.org>
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Cc: Wei Liu <wei.liu2@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
[ wei: rerun autogen.sh ]
Commit 6ef823fd added '-nodefaults' to the qemu args created by
libxl, which is a good step in restricting qemu's default
configuration. This change takes another step by adding
-no-user-config, which ignores any user-provided config files in
sysconfdir. Together, -nodefaults and -no-user-config allow Xen
to avoid unkown and uncontrolled qemu configuration.
Both options are also added to the qemu invocation in the
xen-qemu-dom0-disk-backend systemd service file.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Previously, xenconsoled's daemonize function would do nothing if its
parent process is init (as it is under systemd but not sysv init).
This is confusing. Instead, always daemonize when asked to, but use the
"interactive" switch when running from the systemd service.
Because a pidfile is only written when daemonizing, drop the pidfile
parameters from the service file (systemd keeps track of the pids
anyway).
Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
xendomains will manage guests behind libvirts back:
- libvirt starts a guest
- that guest can be "managed" by libvirt and xl at the same time
- when xendomains runs on shutdown it will save the guest using xl
libvirt does not know about this
- when xendomains runs on boot it will restore the saved guest using xl
libvirt does not know about this, it will just fail to manage the
restored guest
To prevent xendomains from interfering with libvirt add a Conflicts= to
xendomains.service. It will cause libvirt to be stopped if xendomains is
started manually with 'systemctl start'.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Wei Liu <wei.liu2@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
When --with-system-qemu is used, it is possible that we cannot find
qemu-system-i386 in LIBEXEC_BIN, which can cause error in xencommons
init script and xen-qemu-dom0-disk-backend.service systemd service.
Signed-off-by: Ting-Wei Lan <lantw44@gmail.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Don't kill xenstored as part of the usual service shutdown process to
prevent hangs on shutdown where the kernel tries to unplug a VIF
after xenstored has exited.
In an ideal case with all guests cooperating, xendomains will have shut
down all guests before xenstored is killed.
However in the uncooperative case, malicious or crashed guests may still
be running after xendomains has exited and this should not block the
shutdown/reboot of dom0.
Xenstored has no state to sync to disk, and never used to be killed in
the sysvinit case; observe the warning in xencommons. Our testing has
shown regressions caused by the change in behaviour between sysvinit and
systemd when it comes to killing xenstored.
Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
[ ijc -- added systemd to title ]
The original rule to target "distclean" in tools/Rules.mk was in effect
"make clean". It should be "make distclean".
However not all Makefiles in subdirectories have distclean target
defined. So this patch also adds a bunch of distclean targets to various
Makefiles. They only depend on clean target and don't have any actions
in most cases.
With the patch applied, following command outputs 0 results:
find tools -name 'Makefile*' -exec grep -L 'distclean' {} \+ \
| grep -v ocaml | grep -v libfsimage
Ocaml and libfsimage are known to have distclean defined in a dedicated
rules file.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Using SELinux mount options per default breaks several systems.
Either the context= mount option is not known at all to the kernel,
as reported for ArchLinux. Or the default value "none" is unknown to
SELinux, as reported for Fedora. In both cases the unit will fail.
The proper place to specify mount options is /etc/fstab. Apparently
systemd is kind enough to use values from there even if Options= or
What= is specified in a .mount file.
Remove XENSTORED_MOUNT_CTX, the reference to a non-existent
EnvironmentFile and trim default Options= for the mount point.
The removed code was first mentioned in the patch referenced below,
with the following description:
...
* Some systems define the selinux context in the systemd Option for
the /var/lib/xenstored tmpfs:
Options=mode=755,context="system_u:object_r:xenstored_var_lib_t:s0"
For the upstream version we remove that and let systems specify
the context on their system /etc/default/xenstored or
/etc/sysconfig/xenstored $XENSTORED_MOUNT_CTX variable
...
It is nowhere stated (on xen-devel) what "Some systems" means, which
is unfortunately common practice in nearly all opensource projects.
http://lists.xenproject.org/archives/html/xen-devel/2014-03/msg02462.html
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Cc: Wei Liu <wei.liu2@citrix.com>
Cc: Anthony PERARD <anthony.perard@citrix.com>
Cc: M A Young <m.a.young@durham.ac.uk>
Cc: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Release-Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Since commit 4542ae340d ("tools/hotplug:
systemd xenstored dependencies") all service files use the .socket unit
as startup dependency. While this happens to work for boot it fails for
shutdown because a .socket does not seem to enforce ordering. When
xendomains.service runs during shutdown then systemd will stop
xenstored.service at the same time.
Change all "xenstored.socket" to "xenstored.service" to let systemd know
that xenstored has to be shutdown after everything else.
Reported-by: Mark Pryor <tlviewer@yahoo.com>
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
A small helper to draw a graph with dot(1) and show it with display(1):
bash tools/hotplug/Linux/systemd/show_service_dependencies.sh \
tools/hotplug/Linux/systemd/*.in
A red line means Requires= aka "enable it"
A blue line means After=
A green line means Before=
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Every systemd service file uses /proc/xen/capabilites to check if it
runs in a dom0. Update every service file to enable proc-xen.mount with
the Requires= statement and schedule its startup with the After=
statement.
In some places var-lib-xenstored.mount is removed. This is ok because
its optional and this unit is enabled by xenstored itself. After all its
a private directory for xenstored.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Cc: Wei Liu <wei.liu2@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Everything which uses xenstored does this via the socket. Update the
existing service files to enable the xenstored.socket with the Requires=
statement. And schedule startup of the given service files after the
socket is enabled with the After= statement.
Once something tries to access the socket systemd will launch xenstored.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Cc: Wei Liu <wei.liu2@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
ConditionVirtualization= checks if systemd runs in some sort of guest.
It is not supposed to detect host capabilities. The current
implementation happens to work because systemd-detect-virt from v208
returns also 'xen' in a dom0. In v210 and later 'none' is returned and
no service files will be started.
Adjust the checks to detect a dom0 vs. native boot. Mounting xenfs
depends on /proc/xen, but should only be done for pvops because xenfs
exists only there. All other service files should not be started in
domU. The file /proc/xen/capabilities exists in both dom0 and domU in a
pvops kernel, but only in dom0 it contains 'control_d'. The existing
ExecStartPre= check will prevent starting in a domU.
ConditionVirtualization=!xen is true in a dom0. But this check is broken
in systemd v208, so its not used.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Cc: Wei Liu <wei.liu2@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
This reverts commit eac3f5122f.
The "all" target should never depend on "install", it is supposed to only build
not install.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
This replaces config/Linux.modules with a configure option. As a result
of this change only a single xencomons.in is required, instead of a
xencomons.in.in and sed hackery.
After this change blktap2 and blktap will be loaded at the same time.
This is already done in out-of-tree xencommons scripts, and systemd will
load both modules as well. No harm is expected by loading both modules.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Cc: Wei Liu <wei.liu2@citrix.com>
[ ijc -- ran autogen.sh as requested ]
The current usage of LIBEXEC is bogus. It describes the directory for
private xen executables. Other places create their own, similar
libexecdir path as $prefix/lib/xen/*.
Additional two other variables are used to describe similar paths:
PRIVATE_BINDIR and PRIVATE_PREFIX
The autoconf documentation refers to libexec as a directory for
executables and stuff which is called by other programs, not by the
user.
Adjust all places that want libexecdir as a target path. LIBEXEC refers
now to the base directory. Three convenience variables are used to refer
to paths to private binaries, libs and include files.
In the systemd files LIBEXEC_BIN is substituted, so this variable has to
be present in autoconf. All other variables are expanded in Paths.mk
because they are only used in Makefiles.
Most users of LIBEXEC are updated to use LIBEXEC_BIN because that is
what they want.
Users of PRIVATE_BINDIR are updated to use LIBEXEC_BIN because that is
what they want. PRIVATE_BINDIR and PRIVATE_PREFIX usage is removed by
this patch, in favour of LIBXEC_BIN and LIBEXEC
An internal libxl function was removed. A single helper to retrieve
LIBEXEC_BIN remains.
As suggested by the autoconf documentation, configure appends the
package name to LIBEXEC to make sure the provided directory really
refers to xen. This makes sure "make uninstall" preserves the real
libexecdir.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Cc: George Dunlap <george.dunlap@eu.citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Cc: Samuel Thibault <samuel.thibault@ens-lyon.org>
Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Cc: Wei Liu <wei.liu2@citrix.com>
[ ijc -- ran autogen.sh as requested, updated QEMU_TRADITIONAL_REVISION to
pickup version which uses LIBEXEC_BIN ]
A make -j8 will call the xen.conf rule twice. The move-if-changed
macro may fail if the tmp file was already removed by the other make
process. Fix this by let the all target depend on install.
Also remove the generated file with make clean.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Wei Liu <wei.liu2@citrix.com>
[ ijc -- fixed s/of/if/ typo in commit message ]
This adds the systemd xen service / module files and integrates
support into the build system.
This goes in with AX_AVAILABLE_SYSTEMD() which will enable
systemd if development libraries have been found on your
build system. If you don't have systemd on target systems
for binaries built with systemd then the binary will not
work, you must explicitly disable systemd support if you
do not want to build systemd support.
When systemd libraries are present only systems that
have booted into systemd go through the systemd initialization,
otherwise the SysVinit is used.
These are originally based on the Fedora systemd files.
Changes made from Fedora's systemd files:
* split sockets into two files to claim different permissions
* Use /bin/sh -c exec to for a simple launcher implementation
* enables systemd socket activation for C xenstored and Ocaml
oxenstored
* use sd_notify(), so change the service to Type=notify, because of
this we remove the PIDFile specification as we don't care for it, and let
systemd do its magic for us, this also means we don't have to fork
so we use --no-fork with systemd
* defines a modules-load.d, its original source file will be shared
between systemd and old init systems
* simplify service files with ConditionVirtualization=xen which uses
the built in systemd virtualization backend detection, these
service files will not be available to start on systems that do not
boot with xen as a hypervisor
* use autoconf to replace @variable@ paths for us which piggy
backs on top of the latest autoconf changes to xen
* removes oxenstored service file in favor of a system variable which
controls which which xentored to use at run time, we avoid multiple
service files this way.
* simplifies startup to not require polling on the sockets
as initial socket management is handled by systemd, we just
take on the socket later once anything pokes at it, a simple nc -U
(as root) on any of the sockets files can activate the service for example.
Anything queued up will be sent to us once we start. Socket activation
should in theory also let us dynamically switch between xenstores but more
importantly we could upgrade xenstored while keeping all active
socket communication queued up, but in order to take advantage of
this we eventually would need to remove the requirement of not being
able to bring down the xenstored. Even though active sockets are
supported since most libxl communication doesn't triggger a check
on the unix socket first administrators are encouraged to enable
the xenstored.service to triggger an initialization of the xenstored
upon bring up. Some systems also never use unix sockets for
communication with the xenstored and as such active sockets will
not be used there.
* allow for xenstored configuration through *either* of these
configuration files:
- /etc/sysconfig/xenstored
- /etc/default/xenstored
The /etc/default/xenstored will let debian based systems do
the same, while SUSE/OpenSUSE/Fedora/RedHat can keep on chugging
with sysconfig. We leave these files all commented out by default
though given that for systemd we want to encourage not using them.
* ensures we create the run directory as most systems will likely
be using a tmpfs for run dirs for the pid files
* Some systems define the selinux context in the systemd Option for the
/var/lib/xenstored tmpfs:
Options=mode=755,context="system_u:object_r:xenstored_var_lib_t:s0"
For the upstream version we remove that and let systems specify the
context on their system /etc/default/xenstored or /etc/sysconfig/xenstored
$XENSTORED_MOUNT_CTX variable, with a default to none.
* takes advantage of the shared xendomains helper for the xendomains
service
* Add the new dom0 that gets kicked off for disk backend access into
its own systemd service associated to xen
We end up with these systemd files:
General requirements:
* proc-xen.mount
* var-lib-xenstored.mount
xenstored:
* xenstored.service
* xenstored.socket
* xenstored_ro.socket
* xenconsoled.service
* xen-qemu-dom0-disk-backend.service.in
Optional:
* xendomains.service
* xen-watchdog.service
As for integration with xen, we house keep all the systemd files
under a new directory tools/hotplug/Linux/systemd/ and will be targeted
by default when building on Linux systems if systemd development
libraries are present at build time.
The systemd files will be sanitized for meta @VARIABLES@ upon
configuration and installed upon the install target. Systems that
do not use systemd can still get systemd service unit files installed
if the build system enabled systemd support, this however does not
mandate a requirement of having systemd libraries present. Old init
scripts are always installed.
If you don't specify a prefix you will end up with the services
files under /usr/local/lib/systemd/system/ by default, and systemd
modules-load.d conf files under /usr/local/lib/modules-load.d/ which
systemd does look for (although it seems this is not documented).
Distributions are expected to provide their /usr/ prefix to end up in
the more generic location upon distribution install at
/usr/lib/systemd/system/ and /usr/lib/modules-load.d/ respectively.
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Jan Rękorajski <baggins@pld-linux.org>
Cc: M A Young <m.a.young@durham.ac.uk>
Cc: Jacek Konieczny <jajcus@jajcus.net>
Cc: xen-devel@lists.xenproject.org
Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
[ ijc -- ran autogen.sh ]
Petre Pircalabu