The special watches "@introduceDomain" and "@releaseDomain" should be
allowed for privileged callers only, as they allow to gain information
about presence of other guests on the host. So send watch events for
those watches via privileged connections only.
In order to allow for disaggregated setups where e.g. driver domains
need to make use of those special watches add support for calling
"set permissions" for those special nodes, too.
This is part of XSA-115.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Julien Grall <jgrall@amazon.com>
Reviewed-by: Paul Durrant <paul@xen.org>
RDRAND/RDSEED can be hidden using cpuid= to mitigate SRBDS if microcode
isn't available.
This is part of XSA-320 / CVE-2020-0543.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Julien Grall <jgrall@amazon.com>
(cherry picked from commit 7028534d84)
See patch documentation and comments.
This is part of XSA-320 / CVE-2020-0543
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
(cherry picked from commit 6a49b9a792)
The CONTROL command (former DEBUG command) isn't specified in the
xenstore protocol doc. Add it.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Backport: 4.9+
(cherry picked from commit f910c3ebc6)
(cherry picked from commit daf71f0053)
DIRECTORY_PART was missing in docs/misc/xenstore.txt. Add it.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Paul Durrant <pdurrant@amazon.com>
Acked-by: Wei Liu <wl@xen.org>
Backport: 4.9+
(cherry picked from commit 94a0252c10)
(cherry picked from commit 5c1b607e8a)
The written ABI states that %es will be set up, but libxc doesn't do so. In
practice, it breaks `rep movs` inside guests before they reload %es.
The written ABI doesn't mention %ss, but libxc does set it up. Having %ds
different to %ss is obnoxous to work with, as different registers have
different implicit segments.
Modify the spec to state that %ss is set up as a flat read/write segment.
This a) matches the Multiboot 1 spec, b) matches what is set up in practice,
and c) is the more sane behaviour for guests to use.
Fixes: 68e1183411 ('libxc: introduce a xc_dom_arch for hvm-3.0-x86_32 guests')
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Wei Liu <wl@xen.org>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
x86/pvh: Adjust dom0's starting state
Fixes: b25fb1a04e "xen/pvh: Fix segment selector ABI"
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Wei Liu <wl@xen.org>
Acked-by: Jan Beulich <jbeulich@suse.com>
master commit: b25fb1a04e
master date: 2020-02-10 15:26:09 +0000
master commit: 6ee1031362
master date: 2020-02-11 11:04:26 +0000
Due to AMD and Hygon being unable to selectively trap CR4 bit modifications
running 32-bit PV guest inside PV shim comes with significant performance
hit. Moreover, for SMEP in particular every time CR4.SMEP changes on context
switch to/from 32-bit PV guest, it gets trapped by L0 Xen which then
tries to perform global TLB invalidation for PV shim domain. This usually
results in eventual hang of a PV shim with at least several vCPUs.
Since the overall security risk is generally lower for shim Xen as it being
there more of a defense-in-depth mechanism, choose to disable SMEP/SMAP in
it by default on AMD and Hygon unless a user chose otherwise.
Signed-off-by: Igor Druzhinin <igor.druzhinin@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
master commit: b05ec9263e
master date: 2020-01-17 16:18:20 +0100
XSA-302 relies on the use of libxl's "assignable-add" feature to prepare
devices to be assigned to untrusted guests.
Unfortunately, this is not considered a strictly required step for
device assignment. The PCI passthrough documentation on the wiki
describes alternate ways of preparing devices for assignment, and
libvirt uses its own ways as well. Hosts where these alternate methods
are used will still leave the system in a vulnerable state after the
device comes back from a guest.
Default to always quarantining PCI devices, but provide a command line
option to revert back to prior behavior (such that people who both
sufficiently trust their guests and want to be able to use devices in
Dom0 again after they had been in use by a guest wouldn't need to
"manually" move such devices back from DomIO to Dom0).
This is XSA-306.
Reported-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Wei Liu <wl@xen.org>
master commit: ba2ab00bbb
master date: 2019-11-26 14:15:01 +0100
See patch documentation and comments.
This is part of XSA-305 / CVE-2019-11135
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
To protect against the TSX Async Abort speculative vulnerability, Intel have
released new microcode for affected parts which introduce the MSR_TSX_CTRL
control, which allows TSX to be turned off. This will be architectural on
future parts.
Introduce tsx= to provide a global on/off for TSX, including its enumeration
via CPUID. Provide stub virtualisation of this MSR, as it is not exposed to
guests at the moment.
VMs may have booted before microcode is loaded, or before hosts have rebooted,
and they still want to migrate freely. A VM which booted seeing TSX can
migrate safely to hosts with TSX disabled - TSX will start unconditionally
aborting, but still behave in a manner compatible with the ABI.
The guest-visible behaviour is equivalent to late loading the microcode and
setting the RTM_DISABLE bit in the course of live patching.
This is part of XSA-305 / CVE-2019-11135
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
CVE-2018-12207 covers a set of errata on various Intel processors, whereby a
machine check exception can be generated in a corner case when an executable
mapping changes size or cacheability without TLB invalidation. HVM guest
kernels can trigger this to DoS the host.
To mitigate, in affected hardware, all EPT superpages are marked NX. When an
instruction fetch violation is observed against the superpage, the superpage
is shattered to 4k and has execute permissions restored. This prevents the
guest kernel from being able to create the necessary preconditions in the iTLB
to exploit the vulnerability.
This does come with a workload-dependent performance overhead, caused by
increased TLB pressure. Performance can be restored, if guest kernels are
trusted not to mount an attack, by specifying ept=exec-sp on the command line.
This is part of XSA-304 / CVE-2018-12207
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: George Dunlap <george.dunlap@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
When SILO is enabled, there would be no page-sharing or event notifications
between unprivileged VMs (no grant tables or event channels).
Signed-off-by: Xin Li <xin.li@citrix.com>
Acked-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Introduce new boot parameter xsm to choose which xsm module is enabled,
and set default to dummy. And add new option in Kconfig to choose the
default XSM implementation.
Signed-off-by: Xin Li <xin.li@citrix.com>
Acked-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
The Microarchitectural Data Sampling vulnerability is split into categories
with subtly different properties:
MLPDS - Microarchitectural Load Port Data Sampling
MSBDS - Microarchitectural Store Buffer Data Sampling
MFBDS - Microarchitectural Fill Buffer Data Sampling
MDSUM - Microarchitectural Data Sampling Uncacheable Memory
MDSUM is a special case of the other three, and isn't distinguished further.
These issues pertain to three microarchitectural buffers. The Load Ports, the
Store Buffers and the Fill Buffers. Each of these structures are flushed by
the new enhanced VERW functionality, but the conditions under which flushing
is necessary vary.
For this concise overview of the issues and default logic, the abbreviations
SP (Store Port), FB (Fill Buffer), LP (Load Port) and HT (Hyperthreading) are
used for brevity:
* Vulnerable hardware is divided into two categories - parts which suffer
from SP only, and parts with any other combination of vulnerabilities.
* SP only has an HT interaction when the thread goes idle, due to the static
partitioning of resources. LP and FB have HT interactions at all points,
due to the competitive sharing of resources. All issues potentially leak
data across the return-to-guest transition.
* The microcode which implements VERW flushing also extends MSR_FLUSH_CMD, so
we don't need to do both on the HVM return-to-guest path. However, some
parts are not vulnerable to L1TF (therefore have no MSR_FLUSH_CMD), but are
vulnerable to MDS, so do require VERW on the HVM path.
Note that we deliberately support mds=1 even without MD_CLEAR in case the
microcode has been updated but the feature bit not exposed.
This is part of XSA-297, CVE-2018-12126, CVE-2018-12127, CVE-2018-12130, CVE-2019-11091.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
(cherry picked from commit 3c04c258ab)
The MD_CLEAR feature can be automatically offered to guests. No
infrastructure is needed in Xen to support the guest making use of it.
This is part of XSA-297, CVE-2018-12126, CVE-2018-12127, CVE-2018-12130, CVE-2019-11091.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
(cherry picked from commit d4f6116c08)
The CPUID bit and MSR are deliberately not exposed to guests, because they
won't exist on newer processors. As vPMU isn't security supported, the
misbehaviour of PCR3 isn't expected to impact production deployments.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
master commit: 6be613f29b
master date: 2019-03-12 17:05:21 +0000
It's unsafe to disable IOMMU on a live system which is the case
if we're crashing since remapping hardware doesn't usually know what
to do with ongoing bus transactions and frequently raises NMI/MCE/SMI,
etc. (depends on the firmware configuration) to signal these abnormalities.
This, in turn, doesn't play well with kexec transition process as there is
no handling available at the moment for this kind of events resulting
in failures to enter the kernel.
Modern Linux kernels taught to copy all the necessary DMAR/IR tables
following kexec from the previous kernel (Xen in our case) - so it's
currently normal to keep IOMMU enabled. It might require minor changes to
kdump command line that enables IOMMU drivers (e.g. intel_iommu=on /
intremap=on) but recent kernels don't require any additional changes for
the transition to be transparent.
A fallback option is still left for compatibility with ancient crash
kernels which didn't like to have IOMMU active under their feet on boot.
Signed-off-by: Igor Druzhinin <igor.druzhinin@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
master commit: 12c36f577d
master date: 2019-03-12 14:38:12 +0100
In order to have a simple and easy to remember means to suppress all the
more or less recent workarounds for hardware vulnerabilities, force
settings not controlled by "spec-ctrl=" also to their original defaults,
unless they've been forced to specific values already by earlier command
line options.
This is part of XSA-273.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
(cherry picked from commit d8800a82c3)
This mitigation requires up-to-date microcode, and is enabled by default on
affected hardware if available, and is used for HVM guests
The default for SMT/Hyperthreading is far more complicated to reason about,
not least because we don't know if the user is going to want to run any HVM
guests to begin with. If a explicit default isn't given, nag the user to
perform a risk assessment and choose an explicit default, and leave other
configuration to the toolstack.
This is part of XSA-273 / CVE-2018-3620.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
(cherry picked from commit 3bd36952da)
Shadowing a PV guest is only available when shadow paging is compiled in.
When shadow paging isn't available, guests can be crashed instead as
mitigation from Xen's point of view.
Ideally, dom0 would also be potentially-shadowed-by-default, but dom0 has
never been shadowed before, and there are some stability issues under
investigation.
This is part of XSA-273 / CVE-2018-3620.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
(cherry picked from commit 66a4e98681)
It was never expected to work, the implementation is incomplete.
As a side effect, it also prevents guests from triggering a
"BUG_ON(page_get_owner(pg) != d)" in gnttab_unpopulate_status_frames().
This is XSA-268.
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
Acked-by: Jan Beulich <jbeulich@suse.com>
(cherry picked from commit 9a5c16a3e7)
Shared resources (L1 cache and TLB in particular) present a risk of
information leak via side channels. Provide a means to avoid use of
hyperthreads in such cases.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
master commit: d8f974f1a6
master date: 2018-07-19 13:43:33 +0100
Intel Core processors since at least Nehalem speculate past #NM, which is the
mechanism by which lazy FPU context switching is implemented.
On affected processors, Xen must use fully eager FPU context switching to
prevent guests from being able to read FPU state (SSE/AVX/etc) from previously
scheduled vcpus.
This is part of XSA-267 / CVE-2018-3665
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
To combat GPZ SP4 "Speculative Store Bypass", Intel have extended their
speculative sidechannel mitigations specification as follows:
* A feature bit to indicate that Speculative Store Bypass Disable is
supported.
* A new bit in MSR_SPEC_CTRL which, when set, disables memory disambiguation
in the pipeline.
* A new bit in MSR_ARCH_CAPABILITIES, which will be set in future hardware,
indicating that the hardware is not susceptible to Speculative Store Bypass
sidechannels.
For contemporary processors, this interface will be implemented via a
microcode update.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
AMD processors will execute loads and stores with the same base register in
program order, which is typically how a compiler emits code.
Therefore, by default no mitigating actions are taken, despite there being
corner cases which are vulnerable to the issue.
For performance testing, or for users with particularly sensitive workloads,
the `spec-ctrl=ssbd` command line option is available to force Xen to disable
Memory Disambiguation on applicable hardware.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
"make -C docs all" fails due to incorrect markdown syntax in
livepatch.markdown. Correct it.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Misc fixes:
* Insert real URLs
* Drop trailing whitespace
* Consistent alignment and indentation for code blocks and lists
* Consistent capitalisation
* Consistent use of `` blocks for command line arguments and function names
* Rearrange things not to leave < and > in the text
No change in content. The document now reads rather more consistently in HTML
and PDF form.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
In hindsight, the options for `bti=` aren't as flexible or useful as expected
(including several options which don't appear to behave as intended).
Changing the behaviour of an existing option is problematic for compatibility,
so introduce a new `spec-ctrl=` in the hopes that we can do better.
One common way of deploying Xen is with a single PV dom0 and all domUs being
HVM domains. In such a setup, an administrator who has weighed up the risks
may wish to forgo protection against malicious PV domains, to reduce the
overall performance hit. To cater for this usecase, `spec-ctrl=no-pv` will
disable all speculative protection for PV domains, while leaving all
speculative protection for HVM domains intact.
For coding clarity as much as anything else, the suboptions are grouped by
logical area; those which affect the alternatives blocks, and those which
affect Xen's in-hypervisor settings. See the xen-command-line.markdown for
full details of the new options.
While changing the command line options, take the time to change how the data
is reported to the user. The three DEBUG printks are upgraded to unilateral,
as they are all relevant pieces of information, and the old "mitigations:"
line is split in the two logical areas described above.
Sample output from booting with `spec-ctrl=no-pv` looks like:
(XEN) Speculative mitigation facilities:
(XEN) Hardware features: IBRS/IBPB STIBP IBPB
(XEN) Compiled-in support: INDIRECT_THUNK
(XEN) Xen settings: BTI-Thunk RETPOLINE, SPEC_CTRL: IBRS-, Other: IBPB
(XEN) Support for VMs: PV: None, HVM: MSR_SPEC_CTRL RSB
(XEN) XPTI (64-bit PV only): Dom0 enabled, DomU enabled
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Wei Liu <wei.liu2@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Release-acked-by: Juergen Gross <jgross@suse.com>
credit2_cap_period_ms isn't mentioned in xen-command-line.markdown.
Add a description.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Many of the architecture specific boot parameters are not qualified
as such. Correct that. Reorder PKU to be alphabetical.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Avoid flushing the complete TLB when switching %cr3 for mitigation of
Meltdown by using the PCID feature if available.
We are using 4 PCID values for a 64 bit pv domain subject to XPTI and
2 values for the non-XPTI case:
- guest active and in kernel mode
- guest active and in user mode
- hypervisor active and guest in user mode (XPTI only)
- hypervisor active and guest in kernel mode (XPTI only)
We use PCID only if PCID _and_ INVPCID are supported. With PCID in use
we disable global pages in cr4. A command line parameter controls in
which cases PCID is being used.
As the non-XPTI case has shown not to perform better with PCID at least
on some machines the default is to use PCID only for domains subject to
XPTI.
With PCID enabled we always disable global pages. This avoids having to
either flush the complete TLB or do a cycle through all PCID values
when invalidating a single global page.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
If possible use the INVPCID instruction for flushing the TLB instead of
toggling cr4.pge for that purpose.
While at it remove the dependency on cr4.pge being required for mtrr
loading, as this will be required later anyway.
Add a command line option "invpcid" for controlling the use of
INVPCID (default to true).
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Instead of switching XPTI globally on or off add a per-domain flag for
that purpose. This allows to modify the xpti boot parameter to support
running dom0 without Meltdown mitigations. Using "xpti=no-dom0" as boot
parameter will achieve that.
Move the xpti boot parameter handling to xen/arch/x86/pv/domain.c as
it is pv-domain specific.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Some underscores are not escaped in xen-command-line.markdown.
Correct that.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Release-acked-by: Juergen Gross <jgross@suse.com>
Some of the boot parameters in docs/misc/xen-command-line.markdown are
not in the correct alphabetically order. Correct that.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Release-acked-by: Juergen Gross <jgross@suse.com>
This archaeology script:
- figures out what the current and previous Xen versions were
- looks for appropriate git branches for them
- finds SUPPORT.md for each one
- feeds its findings to parse-support-md
We do not intend to integrate this into docs/Makefile, because it
relies on the git history. Instead, we will take the rune provided in
the head comment and paste a variant of it into an appropriate cronjob
on xenbits.
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Release-acked-by: Juergen Gross <jgross@suse.com>
Acked-by: Lars Kurth <lars.kurth@citrix.com>
---
v3: Provide -D option.
Add pvcalls support to libxl and xl. Create the appropriate pvcalls
entries in xenstore.
Signed-off-by: Stefano Stabellini <stefano@aporeto.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
All this information is now covered in SUPPORT.md.
Most of the emulated hardware is obvious a couple of the items are
worth pointing out specifically.
"xen_disk" is listed under "Blkback"
"...the PCI host bridge and the PIIX3 chipset...": This statement is
redundant -- the PCI host bridge is a part of the piix3 chipset, which
is listed as supported.
xenfb: The "graphics" side of "xenfb" is listed under "PV Framebuffer
(backend)", and the "input" side of "xenfb" (including both keyboard
and mouse) is listed under "PV Keyboard (backend)".
Backing storage image format is listed in the "Blkback" section.
Fix 'stdvga' spelling while we're here.
Signed-off-by: George Dunlap <george.dunlap@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Xen does not properly support big.LITTLE platform. All vCPUs of a guest
will always have the MIDR of the boot CPU (see arch_domain_create).
At best the guest may see unreliable performance (vCPU switching between
big and LITTLE), at worst the guest will become unreliable or insecure.
This is becoming more apparent with branch predictor hardening in Linux
because they target a specific kind of CPUs and may not work on other
CPUs.
For the time being, park any CPUs with a MDIR different from the boot
CPU. This will be revisited in the future once Xen gains understanding
of big.LITTLE.
[1] https://lists.xenproject.org/archives/html/xen-devel/2016-12/msg00826.html
Signed-off-by: Julien Grall <julien.grall@arm.com>
Reviewed-by: Oleksandr Tyshchenkko <oleksandr_tyshchenko@epam.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Acked-by: Jan Beulich <jbeulich@suse.com>
This patch was originally released as part of XSA-226. It retains the same
command line syntax (as various downstreams are mitigating XSA-226 using this
mechanism) but the defaults have been updated due to the revised XSA-226
patched, after which transitive grants are believed to functioning
properly.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
The current XPTI implementation isolates the directmap (and therefore a lot of
guest data), but a large quantity of CPU0's state (including its stack)
remains visible.
Furthermore, an attacker able to read .text is in a vastly superior position
to normal when it comes to fingerprinting Xen for known vulnerabilities, or
scanning for ROP/Spectre gadgets.
Collect together the entrypoints in .text.entry (currently 3x4k frames, but
can almost certainly be slimmed down), and create a common mapping which is
inserted into each per-cpu shadow. The stubs are also inserted into this
mapping by pointing at the in-use L2. This allows stubs allocated later (SMP
boot, or CPU hotplug) to work without further changes to the common mappings.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
So it can be used by both gcc and clang. Just add the Kconfig option
and modify the makefiles so the llvm coverage specific code can be
added in a follow up patch.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
[jb: also change the shim config]
Support both a "disable everything" and a "disable all RSB overwriting"
sub-option.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Issuing an IBPB command flushes the Branch Target Buffer, so that any poison
left by one vcpu won't remain when beginning to execute the next.
The cost of IBPB is substantial, and skipped on transition to idle, as Xen's
idle code is robust already. All transitions into vcpu context are fully
serialising in practice (and under consideration for being retroactively
declared architecturally serialising), so a cunning attacker cannot use SP1 to
try and skip the flush.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Juergen Gross
Andrew Cooper
Igor Druzhinin
Jan Beulich
Xin Li
Stefano Stabellini
Wei Liu
Ian Jackson
Amit Singh Tomar
George Dunlap
Julien Grall
Roger Pau Monné