Allow the path to be set from a configure command line option.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
[ wei: run autogen.sh ]
Config.mk
MINIOS_UPSTREAM_REVISION } changed from tag to equivalent
QEMU_TRADITIONAL_REVISION } specific commit hash
QEMU_UPSTREAM_REVISION now tracking master again
README, xen/Makefile
Update version number
*/configure
Reran autoconf; only change is version number
tools/Rules.mk, xen/Kconfig.debug
Enable debug.
Reverts 229ff3125b "Use non-debug build for Xen 4.9".
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
There have been reports that Fedora 25 uses /run instead of /var/run.
Add a --with-rundir option ito configure to be able to specify that
directory. Default is still /var/run.
A re-run of autogen.sh is required.
Signed-off-by: Juergen Gross <jgross@suse.com>
[ wei: run autogen.sh ]
Acked-by: Wei Liu <wei.liu2@citrix.com>
It defaults to /var/run/xenstored. It will be used later to remove some
hard-coded paths in tree. There should be no visible change to default
configuration.
Install and remove it in respective Makefile targets.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
This variable defaults to /var/lib/xen. It will be used to substitute
various hard-coded paths in tools.
The new variable points to $localstatedir/lib/xen, which defaults to
/var/lib/xen, so there is no change in default configuration.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
In 936a7a54 ("Open Xen 4.8-unstable), output of autogen.sh was not
included. The configure scripts still referred to 4.7.
Run autogen.sh and commit the result.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
During the make world, git mini-os.git didn't honor the 'configure
--enable-githttp' option. The 'enable-githttp' was only honored in
the tools subdirectory.
Signed-off-by: Paul Lai <paul.c.lai@intel.com>
[ wei: add prefix "build:" to title ]
Acked-by: Wei Liu <wei.liu2@citrix.com>
Release-acked-by: Wei Liu <wei.liu2@citrix.com>
Currently we hardcode various paths such as $libexec/xen/{bin,boot},
however some downstreams (notably Debian) would like instead to
install things into $libexec/xen-X.Y/{bin,boot} as part of allowing
multiple versions of the tools packages to be installed.
Since this currently involves patching configure its a bit fiddly,
provide a configure option for the leaf dir instead, name it
--with-libexec-leaf-dir similar to the existing
--with-sysconfig-leaf-dir.
Rather than have the determination of the full path in both configure
and config/Paths.mk.in move it into configure only. Also for
consistency move the other LIBEXEC_* to configure, even though they
are only substituted into Paths.mk.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Reviewed-by: Doug Goldstein <cardoe@cardoe.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Cc: 805508@bugs.debian.org
[ ijc -- removed stray ` ]
315a8722b4 bumped the version after 4.6
branched. This picks up that change into the generated files.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
The current base directory /var/xen/dump for domU dumps will be patched
to /var/lib/xen/dump by most distros to follow FHS.
This change does three things:
- change the default from /var/xen/dump to /var/lib/xen/dump
- provide a configure option to avoid patching the source.
- update docs to refer to the new default location
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Wei Liu <wei.liu2@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
[ ijc -- s,/var,LOCALSTATEDIR, in help test, ran autogen.sh ]
A pkg-config file for libxl. It also contains two variables
(xenfirmwaredir and libexec_bin) so that tools that are very keen on
knowing the locations of Xen binaries (say, libvirt) can use them to
determine the location of the binaries.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
[ ijc -- ran autogen.sh ]
Various configure scripts have the Xen version built into them by
autoconf. Rereun autogen.sh (on Debian wheezy) so that they all say
4.6. There are no changes other than to doc comments, usage messages,
and so forth.
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Set CONFIG_LEAF_DIR with configure to give control if needed. The
check for the correct value if the option is not specified is tricky.
Since other packages (such as grub2) started to populate also
/etc/default/ a given system may have both directories.
Use "default" only if /etc/sysconfig does not exist. "sysconfig"
remains the default.
Move the variable from StdGNU.mk to Linux.mk because thats the only
place where it is used.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Cc: Wei Liu <wei.liu2@citrix.com>
[ ijc -- ran autogen.sh as requested ]
The current usage of LIBEXEC is bogus. It describes the directory for
private xen executables. Other places create their own, similar
libexecdir path as $prefix/lib/xen/*.
Additional two other variables are used to describe similar paths:
PRIVATE_BINDIR and PRIVATE_PREFIX
The autoconf documentation refers to libexec as a directory for
executables and stuff which is called by other programs, not by the
user.
Adjust all places that want libexecdir as a target path. LIBEXEC refers
now to the base directory. Three convenience variables are used to refer
to paths to private binaries, libs and include files.
In the systemd files LIBEXEC_BIN is substituted, so this variable has to
be present in autoconf. All other variables are expanded in Paths.mk
because they are only used in Makefiles.
Most users of LIBEXEC are updated to use LIBEXEC_BIN because that is
what they want.
Users of PRIVATE_BINDIR are updated to use LIBEXEC_BIN because that is
what they want. PRIVATE_BINDIR and PRIVATE_PREFIX usage is removed by
this patch, in favour of LIBXEC_BIN and LIBEXEC
An internal libxl function was removed. A single helper to retrieve
LIBEXEC_BIN remains.
As suggested by the autoconf documentation, configure appends the
package name to LIBEXEC to make sure the provided directory really
refers to xen. This makes sure "make uninstall" preserves the real
libexecdir.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Cc: George Dunlap <george.dunlap@eu.citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Cc: Samuel Thibault <samuel.thibault@ens-lyon.org>
Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Cc: Wei Liu <wei.liu2@citrix.com>
[ ijc -- ran autogen.sh as requested, updated QEMU_TRADITIONAL_REVISION to
pickup version which uses LIBEXEC_BIN ]
... because they are already in Paths.mk:
BINDIR, LIBEXEC, PRIVATE_BINDIR, PRIVATE_PREFIX, SBINDIR, SHAREDIR,
XEN_CONFIG_DIR, XENFIRMWAREDIR, XEN_LOCK_DIR, XEN_PAGING_DIR,
XEN_RUN_DIR. Remove unused PKG_XEN_PREFIX, which was also incorrectly
assigned to PRIVATE_PREFIX.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Cc: Wei Liu <wei.liu2@citrix.com>
[ ijc -- ran autogen.sh as requested ]
Stubdomain code as-is doesn't compile on FreeBSD, so disable it for
now in order to have a working build.
Please re-run autoconf after committing.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Cc: Ian Jackson <Ian.Jackson@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Otherwise "./configure --prefix=/usr" still ends up with exec_prefix=/usr/local
and therefore LIBDIR, PRIVATE_PREFIX and PRIVATE_BINDIR still point to
/usr/local/foo.
This was broken in 54f28913a2 "autoconf: xen: move standard path variables to
config/Paths.mk.in" which tried to add code to expand exec_prefix earlier.
Reported-by: Julien Grall <julien.grall@linaro.org>
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Cc: Luis R. Rodriguez <mcgrof@suse.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
This moves all generic path variables to a new the config/Paths.mk.in
input source file to be processed at configure time, tons of files use
these so this just share them. This also paves the way to let us
easily dynamically configure these with autoconf, for now we leave the
same presets as was present before.
This work was prompted by looking for an autoconf way to do
replacements for the hotplug global file, while at it I realized
that a few other files use the same variables and have in places
around the tree the same constructs for generating their own
files. This makes use of the old buildmakevars2file() but generalizes
the definition of the paths at configure time and spreads the
new definitions out throughout the build system.
This has no impact on building the hypervisor and extras/mini-os,
you do not need to, and are not expected to, run configure to build
those targets.
While at it lets add some documentation on the for the two files on
the source file, we can expand further details on the wiki [0].
[0] http://wiki.xen.org/wiki/Category:Host_Configuration#System_wide_xen_configuration
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Cc: Samuel Thibault <samuel.thibault@ens-lyon.org>
Cc: Jan Beulich <jbeulich@suse.com>
Cc: Keir Fraser <keir@xen.org>
Cc: Tim Deegan <tim@xen.org>
Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
[ ijc -- reran autogen.sh ]
We haven't shipped a XenoLinux kernel for more releases than I can remember.
We held onto these because osstest was using them but this is no longer the
case.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
This is the version from Debian Wheezy which is what both Ian Jackson and
myself run on our workstations. As committers it is useful to minimise
regeneration noise.
This is purely a run of autogen.sh. I have not tried to build the result.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Tested-by: Ian Jackson <ian.jackson@citrix.com>
Now that the hotplug scripts have been fixed to remove hardcoded paths lets
try this again. From 26470:acaf29203cf9:
This is the defacto (or FHS mandated?) standard location for software
built from source, in order to avoid clashing with packaged software
which is installed under /usr/bin etc.
I think there is benefit in having Xen's install behave more like the
majority of other OSS software out there.
The major downside here is in the transition from 4.2 to 4.3 where
people who have built from source will innevitably discover breakage
because 4.3 no longer overwrites stuff in /usr like it used to so they
pickup old stale bits from /usr instead of new stuff from /usr/local.
Packages will use ./configure --prefix=/usr or whatever helper macro
their package manager gives them. I have confirmed that doing this
results in the same list of installed files as before this patch was
applied.
The hypervisor remains in /boot/ and there is no intention to move it.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Roger Pau Monné <roger.pau@citrix.com>
26470:acaf29203cf9 missed a bunch of hardcoded paths, e.g. in the
initscripts. I think at this juncture it is appropriate to revert
this change and try again after some more testing.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Roger Pau Monné <roger.pau@citrix.com>
Committed-by: Ian Campbell <ian.campbell@citrix.com>
This is the defacto (or FHS mandated?) standard location for software
built from source, in order to avoid clashing with packaged software
which is installed under /usr/bin etc.
I think there is benefit in having Xen's install behave more like the
majority of other OSS software out there.
The major downside here is in the transition from 4.2 to 4.3 where
people who have built from source will innevitably discover breakage
because 4.3 no longer overwrites stuff in /usr like it used to so they
pickup old stale bits from /usr instead of new stuff from /usr/local.
Packages will use ./configure --prefix=/usr or whatever helper macro
their package manager gives them. I have confirmed that doing this
results in the same list of installed files as before this patch was
applied.
The hypervisor remains in /boot/ and there is no intention to move it.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Matt Wilson <msw@amazon.com>
Committed-by: Ian Campbell <ian.campbell@citrix.com>
Added autotools magic to replace custom check scripts. The previous
checks have been ported to autoconf, and some additional ones have
been added (plus the suggestions from running autoscan). Two files are
created as a result from executing configure script, config/Tools.mk
and config.h.
conf/Tools.mk is included by tools/Rules.mk, and contains most of the
options previously defined in .config, that can now be set passing
parameters or defining environment variables when executing configure
script.
config.h is only used by libxl/xl to detect yajl_version.h.
[ tools/config.sub and config.guess copied from
autotools-dev 20100122.1 from Debian squeeze i386,
which is GPLv2.
tools/configure generated using the included ./autogen.sh
which ran autoconf 2.67-2 from Debian squeeze i386. autoconf
is GPLv3+ but has a special exception for the autoconf output;
this exception applies to us and exempts us from complying
with GPLv3+ for configure, which is good as Xen is GPL2 only.
- Ian Jackson ]
Signed-off-by: Roger Pau Monne <roger.pau@entel.upc.edu>
Tested-by: Ian Jackson <ian.jackson@eu.citrix.com>
Committed-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Ian Jackson