DEPS_INCLUDE is currently the same as DEPS, so no functional change.
This patch is the result of this perl rune:
git-grep -l 'include.*DEPS' | xargs perl -i -pe 'next unless m/^-?include/; s/\bDEPS\b/DEPS_INCLUDE/'
I have verified that I haven't missed anything, with this rune:
git-grep '\bDEPS\b'
Reported-by: Jan Beulich <JBeulich@suse.com>
CC: Wei Liu <wei.liu2@citrix.com>
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
DEPS_RM is currently the same as DEPS, so no functional change.
This patch is the result of two perl runes:
git-grep -l 'rm.*DEPS' | xargs perl -i~ -pe 'next unless m/^\t+rm\b/; s/\bDEPS\b/DEPS_RM/;'
git-grep -l 'RM.*DEPS' | xargs perl -i~ -pe 'next unless m/^\t+\$\(RM\)/; s/\bDEPS\b/DEPS_RM/;'
And editing tools/xenstat/libxenstat/Makefile by hand.
I verified that I didn't miss anything with this rune:
git-grep '\bDEPS\b' | grep -v include |less
Reported-by: Jan Beulich <JBeulich@suse.com>
CC: Wei Liu <wei.liu2@citrix.com>
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Running "make uninstall" does not remove all installed files, a
situation which might cause link related issues if xen is re-installed
in a different location.
In order to make uninstall correctly remove the files it is best
the process should be done recursively by mirroring each "install"
target with an "uninstall" who removes the installed files.
An exception to this rule is uninstalling the files produced by
"qemu-xen-dir-remote" and "qemu-xen-traditional-dir", which are external
to the project. These projects do not implement an "uninstall" target so
the files have to be removed manually.
Signed-off-by: Petre Pircalabu <ppircalabu@bitdefender.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
As recommended in http://www.gnu.org/licenses/gpl-howto.en.html.
This is the result of:
$ git grep -El Mass\|Temple\|Franklin | xargs ./fsf.pl
Where fsf.pl is:
#!/usr/bin/perl -w -pi.bak -0777
my $repl = 'If not, see <http://www.gnu.org/licenses/>.';
my $br = qr/(?:\s*\n\s*(?:[\*\#]|\/\/|\.\\" )?\s*|\s+)/;
my $inwt = qr/[Ii]f${br}not,${br}write${br}(?:to${br})?the${br}Free${br}Software${br}Foundation,(?:${br}Inc\.,)?/;
my $mass = qr/675${br}Mass${br}Ave,?${br}Cambridge,?${br}MA${br}02139,?${br}USA,?\.?/;
my $franklin = qr/51${br}Franklin${br}St(?:reet)?(?:,${br}| - )Fifth${br}Floor,?${br}Boston,?${br}MA,?${br}02110-1301,?${br}USA,?\.?/;
my $temple = qr/59${br}Temple${br}Place(?:,${br}| - )Suite${br}330,?${br}Boston,?${br}MA,?${br}021110?-1307,?${br}USA,?\.?/;
s|$inwt$br$mass|$repl|m;
s|$inwt$br$franklin|$repl|m;
s|$inwt$br$temple|$repl|m;
The only remaining mentions of these addresses are in COPYING files which I
haven't touched.
Some of the changed files are imports from elsewhere, however
filtering them out is tricky, I think it is tolerable to have these
files be modified here and then perhaps reverted on the next sync,
since it's only 1-2 lines and obvious what is going on.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
The original rule to target "distclean" in tools/Rules.mk was in effect
"make clean". It should be "make distclean".
However not all Makefiles in subdirectories have distclean target
defined. So this patch also adds a bunch of distclean targets to various
Makefiles. They only depend on clean target and don't have any actions
in most cases.
With the patch applied, following command outputs 0 results:
find tools -name 'Makefile*' -exec grep -L 'distclean' {} \+ \
| grep -v ocaml | grep -v libfsimage
Ocaml and libfsimage are known to have distclean defined in a dedicated
rules file.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Patch generated by the following semantic patch
(http://coccinelle.lip6.fr/):
@@
expression *P;
@@
- if(P) free(P);
+ free(P);
...and then by filtering through the following command:
filterdiff -p1 -x 'stubdom/*' -x 'tools/firmware/*' -x 'tools/qemu-*' -x 'tools/blktap*'
Signed-off-by: Matthew Daley <mattjd@gmail.com>
Acked-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
I'm not mad keen on propagating these sorts of asm atomic operations throughout
our code base. Other options would be:
- use libatomic-ops, http://www.hpl.hp.com/research/linux/atomic_ops/, although
this doesn't seem to be as widespread as I would like (not in RHEL5 for
example)
- use a pthread lock. This is probably the simplest/best option but I wasn't
able to figure out the locking hierarchy of this code
So I've copped out and just copied the appropriate inlines here.
I also nuked some stray ia64 support and fixed a coment in the arm32 version
while I was here.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Per page operations in the paging, sharing, and access tracking subsystems are
all implemented with domctls (e.g. a domctl to evict one page, or to share one
page).
Under heavy load, the domctl path reveals a lack of scalability. The domctl
lock serializes dom0's vcpus in the hypervisor. When performing thousands of
per-page operations on dozens of domains, these vcpus will spin in the
hypervisor. Beyond the aggressive locking, an added inefficiency of blocking
vcpus in the domctl lock is that dom0 is prevented from re-scheduling any of
its other work-starved processes.
We retain the domctl interface for setting up and tearing down
paging/sharing/mem access for a domain. But we migrate all the per page
operations to use the memory_op hypercalls (e.g XENMEM_*).
Signed-off-by: Andres Lagar-Cavilla <andres@lagarcavilla>
Signed-off-by: Adin Scannell <adin@scannell.ca>
Acked-by: Tim Deegan <tim@xen.org>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Committed-by: Tim Deegan <tim@xen.org>
This patch is the folded version of API updates, along with the associated tool
changes to ensure that the build is always consistent.
API updates:
- The source domain in the sharing calls is no longer assumed to be dom0.
- Previously, the mem sharing code would return an opaque handle to index
shared pages (and nominees) in its global hash table. By removing the hash
table, the handle becomes a version, to avoid sharing a stale version of a
page. Thus, libxc wrappers and tools need to be updated to recall the share
functions with the information needed to fetch the page (which they readily
have).
Tool updates:
The only (in-tree, that we know of) consumer of the mem sharing API is the
memshr tool. This is updated to use the new API.
Signed-off-by: Andres Lagar-Cavilla <andres@lagarcavilla.org>
Signed-off-by: Adin Scannell <adin@scannell.ca>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Tim Deegan <tim@xen.org>
This patch addresses some of the compile and link issues with the memshr
module.
Signed-off-by: Adin Scannell <adin@scannell.ca>
Signed-off-by: Andres Lagar-Cavilla <andres@lagarcavilla.org>
Acked-by: Ian Jackson <ian.jackson.citrix.com>
Committed-by: Ian Jackson <ian.jackson.citrix.com>
19025:bd78714b8594 switched to "-MMD -MF" in preference, adding the
correct runes to tools/Rules.mk but appears to have missed some other
uses of -Wp,...
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
Otherwise make can search the path relative to certain standard paths
such as /usr/include (e.g., the line '-include $(XEN_ROOT)/.config' in
Config.mk suffers from this).
Signed-off-by: Keir Fraser <keir@xen.org>
This patch eliminate the global variables in libxenctrl (used for
logging and error reporting).
Instead the information which was in the global variables is now in a
new xc_interface* opaque structure, which xc_interface open returns
instead of the raw file descriptor; furthermore, logging is done via
xentoollog.
There are three new parameters to xc_interface_open to control the
logging, but existing callers can just pass "0" for all three to get
the old behaviour.
All libxc callers have been adjusted accordingly.
Also update QEMU_TAG for corresponding qemu change.
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
detect sharable memory pages). This patch establishes unique id for each disk
image opened by tapdisk2, and stores it in shared memory region, thus making it
available to the remaining tapdisk2s.
Signed-off-by: Grzegorz Milos <Grzegorz.Milos@citrix.com>
the tapdisk2 process if sharing is enabled (tapdisk2 is not normally aware what
domain it is working for).
Signed-off-by: Grzegorz Milos <Grzegorz.Milos@citrix.com>
a single map is used to store mappings between sharing handles and disk blocks.
This is used to share pages which store data read of the same blocks on
(virtual) disk.
Note that the map is stored in a shared memory region, as it needs to be
accessed by multiple tapdisk processes. This complicates memory allocation
(malloc cannot be used), prevents poniters to be stored directly (as the shared
memory region might and is mapped at different base address) and finally pthread
locks need to be multi-process aware.
Signed-off-by: Grzegorz Milos <Grzegorz.Milos@citrix.com>
Ian Jackson