To combat GPZ SP4 "Speculative Store Bypass", Intel have extended their
speculative sidechannel mitigations specification as follows:
* A feature bit to indicate that Speculative Store Bypass Disable is
supported.
* A new bit in MSR_SPEC_CTRL which, when set, disables memory disambiguation
in the pipeline.
* A new bit in MSR_ARCH_CAPABILITIES, which will be set in future hardware,
indicating that the hardware is not susceptible to Speculative Store Bypass
sidechannels.
For contemporary processors, this interface will be implemented via a
microcode update.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
qemu upstream uses git submodules. git archive does not work with git
submodules (and could not work properly with them, because this is one
of the many things it is inherently impossible to do correctly with
git submodules).
qemu upstream have worked around this by providing a rather scary
shell script which attempts to do roughly the right thing. It's close
enough that we can use it with only minor precautions.
Unfortunately this does mean that `mktarball' now executes the qemu
source code it was using, rather than merely shuffling it about, as it
did previously. I think this is a less bad ill than copying (and,
effectively, forking) the scary script.
CC: Wei Liu <wei.liu2@citrix.com>
CC: George Dunlap <george.dunlap@eu.citrix.com>
CC: Juergen Gross <jgross@suse.com>
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Acked-by: George Dunlap <george.dunlap@citrix.com>
gcc-8 complains:
xen-lowmemd.c: In function 'handle_low_mem':
xen-lowmemd.c:80:55: error: '%s' directive output may be truncated writing up to 511 bytes into a region of size 489 [-Werror=format-truncation=]
snprintf(error, BUFSZ,"Failed to write target %s to xenstore", data);
^~ ~~~~
xen-lowmemd.c:80:9: note: 'snprintf' output between 36 and 547 bytes into a destination of size 512
snprintf(error, BUFSZ,"Failed to write target %s to xenstore", data);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In practice it wouldn't happen, because 'data' contains string
representation of 64-bit unsigned number (20 characters at most).
But place a limit to mute gcc warning.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Release-Acked-by: Juergen Gross <jgross@suse.com>
Now that it is possible to get and set the migration
delay via the SCHEDOP sysctl, use that in xenpm, instead
of the special purpose libxc interface (which will be
removed in a following commit).
The sysctl, however, requires a cpupool-id argument,
for knowing on which scheduler it is operating on. In
this case, since we don't want to alter xenpm's command
line interface, we always use '0', which means xenpm
will always act on the default cpupool ('Pool-0').
>From this commit on, `xenpm {set,get}-vcpu-migration-delay'
commands work again. But that is only for the sake of
backward compatibility, and their use is deprecated, in
favour of 'xl sched-credit -s [-c <poolid>] -m <delay>'.
Signed-off-by: Dario Faggioli <dfaggioli@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
The recent commit 66bf4ef0 "x86/hvm: re-work viridian APIC assist code"
modified one of the field names in struct hvm_viridian_vcpu_context but
did not accordingly modify xen-hvmctx, leading to a failure to build tools.
This patch makes the necessary change to fix the build.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Contemporary processors are gaining Indirect Branch Controls via microcode
updates. Intel are introducing one bit to indicate IBRS and IBPB support, and
a second bit for STIBP. AMD are introducing IBPB only, so enumerate it with a
separate bit.
Furthermore, depending on compiler and microcode availability, we may want to
run Xen with IBRS set, or clear.
To use these facilities, we synthesise separate IBRS and IBPB bits for
internal use. A lot of infrastructure is required before these features are
safe to offer to guests.
This is part of XSA-254.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
It makes more sense to put a tool to be used by other subsystems
to be in 'tools/misc' along 'mkrpm','mkdeb', etc.
The patch titled "xen/livepatch/x86/arm32: Force .livepatch.depends
section to be uint32_t aligned" uses mkhex.
Acked-by: Wei Liu <wei.liu2@citrix.com>
Suggested-by: Julien Grall <julien.grall@arm.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
DEPS_INCLUDE is currently the same as DEPS, so no functional change.
This patch is the result of this perl rune:
git-grep -l 'include.*DEPS' | xargs perl -i -pe 'next unless m/^-?include/; s/\bDEPS\b/DEPS_INCLUDE/'
I have verified that I haven't missed anything, with this rune:
git-grep '\bDEPS\b'
Reported-by: Jan Beulich <JBeulich@suse.com>
CC: Wei Liu <wei.liu2@citrix.com>
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
DEPS_RM is currently the same as DEPS, so no functional change.
This patch is the result of two perl runes:
git-grep -l 'rm.*DEPS' | xargs perl -i~ -pe 'next unless m/^\t+rm\b/; s/\bDEPS\b/DEPS_RM/;'
git-grep -l 'RM.*DEPS' | xargs perl -i~ -pe 'next unless m/^\t+\$\(RM\)/; s/\bDEPS\b/DEPS_RM/;'
And editing tools/xenstat/libxenstat/Makefile by hand.
I verified that I didn't miss anything with this rune:
git-grep '\bDEPS\b' | grep -v include |less
Reported-by: Jan Beulich <JBeulich@suse.com>
CC: Wei Liu <wei.liu2@citrix.com>
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Running "make uninstall" does not remove all installed files, a
situation which might cause link related issues if xen is re-installed
in a different location.
In order to make uninstall correctly remove the files it is best
the process should be done recursively by mirroring each "install"
target with an "uninstall" who removes the installed files.
An exception to this rule is uninstalling the files produced by
"qemu-xen-dir-remote" and "qemu-xen-traditional-dir", which are external
to the project. These projects do not implement an "uninstall" target so
the files have to be removed manually.
Signed-off-by: Petre Pircalabu <ppircalabu@bitdefender.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
As both xen-netfront and xen-blkfront support multi-queue, they would
consume a lot of grant table references when there are many paravirtual
devices and vcpus assigned to guest. Guest domU might panic or hang due to
grant allocation failure when nr_grant_frames in guest has reached its max
value.
This utility would help the administrators to diagnose xen issue. There is
only one command gnttab_query_size so far to monitor the guest grant table
frame usage on dom0 side so that it is not required to debug on guest
kernel side for crash/hang analysis anymore.
It is extensible for adding new commands for more diagnostic functions and
the framework of xen-diag.c is from xen-livepatch.c.
Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Instead of relying on cpuid instruction behaviour to tell which domain
type we are just try asking the kernel via the appropriate sysfs node
(added in Linux kernel 4.13).
Keep the old detection logic as a fallback for older kernels.
Signed-off-by: Juergen Gross <jgross@suse.com>
User can set max freq to specific cpu by
"xenpm set-scaling-maxfreq [cpuid] <HZ>"
or set max freq to all cpu with default cpuid by
"xenpm set-scaling-maxfreq <HZ>".
Set max freq with default cpuid will cause
segmentation fault after commit id d4906b5d05.
This patch will fix this issue and add ability
to set max freq with default cpuid.
Signed-off-by: Luwei Kang <luwei.kang@intel.com>
Compile-tested-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Release-acked-by: Julien Grall <julien.grall@arm.com>
GCC7 complains about a possible overflow/truncation in xenlockprof.
xenlockprof.c: In function ‘main’:
xenlockprof.c:100:53: error: ‘%s’ directive writing up to 39 bytes into a
region of size between 17 and 37 [-Werror=format-overflow=]
sprintf(name, "unknown type(%d) %d lock %s", data[j].type,
^~
xenlockprof.c:100:13: note: ‘sprintf’ output between 24 and 83 bytes
into a destination of size 60
sprintf(name, "unknown type(%d) %d lock %s", data[j].type,
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
data[j].idx, data[j].name);
~~~~~~~~~~~~~~~~~~~~~~~~~~
This increases the size of name to 100. Not the most scalable solution,
but certainly the "cheapest", as it doesn't add dependencies for
asprintf.
Signed-off-by: Seraphime Kirkovski <kirkseraph@gmail.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
The Hypervisor Top Level Functional Specification v5.0a has many differences
from previous versions and introduces whole new sections.
This patch:
- Updates the URL at the top of the source.
- Fixes up section references accordingly.
- Modifies the MSR naming convention in the code to match the specification.
- Rename the apic_assist page to the vp_assist page to reflect the change
in the specification.
(The APIC assist feature itself is inconsistently named in the
specification so stick wth the current feature name).
- Updates the handling of CPUID leaf 3.
There is one functional change in this patch: The vp_assist page is
mapped (and completely zeroed) regardless of whether the APIC assist
feature is enabled. This reflects its new wider remit and simplifies the
code slightly.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
The variable virq_port of type uint32_t was compared to being greater than
-1. This check always results in false for unsigned data types, resulting
in never cleaning up the memory. Furthermore, the initialization with a
negative variable for an unsigned type has been fixed.
Signed-off-by: Norbert Manthey <nmanthey@amazon.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
The following incorrect format specifiers and incorrect number of parameters
passed to printf like functions are reported by clang:
mce.c:601:18: error: data argument not used by format string [-Werror,-Wformat-extra-args]
smp_processor_id());
^
xenpm.c:102:23: error: data argument not used by format string [-Werror,-Wformat-extra-args]
what, argv[argc > 1]);
^
libxl_internal.c:25:69: error: data argument not used by format string
[-Werror,-Wformat-extra-args]
libxl__log(ctx, XTL_CRITICAL, ENOMEM, 0,0, func, INVALID_DOMID, L);
^
libxl_internal.c:24:17: note: expanded from macro 'L'
func, (unsigned long)nmemb, (unsigned long)size
^
libxl_internal.c:26:21: error: data argument not used by format string
[-Werror,-Wformat-extra-args]
fprintf(stderr, L);
^
libxl_internal.c:24:17: note: expanded from macro 'L'
func, (unsigned long)nmemb, (unsigned long)size
^
This patch contains the fixes for them and enables -Wformat for clang.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Exit with 0 for success.
Exit with 1 for an error.
Exit with 2 if the operation should be retried for any reason (e.g. a
timeout or because another operation was in progress).
This allows a program or script driving xen-livepatch to determine if
the operation should be retried without parsing the output.
Acked-by: Wei Liu <wei.liu2@citrix.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
The default timeout in the hypervisor for a livepatch operation is 30 ms,
but xen-livepatch currently waits for up to 30 seconds for the operation
to complete. Instead, remove the retry loop and simply wait for 2 * 30 ms
for the operation to complete. The extra period is to account for the
time to actually start the operation.
Furthermore, have xen-livepatch set the hypervisor timeout rather than
relying on the hypervisor default since the tool doesn't know how long
it will be. Use nanosleep rather than usleep since usleep has been
removed from POSIX.1-2008.
Acked-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Improving the output of xen-livepatch, which is currently hard to read,
especially when an error occurs.
Some examples of the changes:
Before:
$ xen-livepatch apply test
Performing apply:. completed
After:
$ xen-livepatch apply test
Applying test:. completed
Before:
$ xen-livepatch apply test2
test2 failed with 22(Invalid argument)
Performing apply: (no newline)
After:
$ xen-livepatch apply test2
Applying test2: failed
Error 22: Invalid argument
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Using both stdout and stderr interleaved without newlines can result in
strange output when using line buffered mode (e.g. a terminal) or when
fully buffered (e.g. redirected to a file). Set stdout to unbuffered mode
to fix this (stderr is always unbuffered by default).
Acked-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Somewhat confusingly, before the action has been executed the patch is
expected to be in the "allow" state, not the "expected" state. The
check for this was correct but the subsequent error message was not.
Fix the error message to show this state correctly.
Before:
$ xen-livepatch unload test
test: in wrong state (APPLIED), expected (unknown)
After:
$ xen-livepatch unload test
test: in wrong state (APPLIED), expected (CHECKED)
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Provide two tools: a small C program to extract data from hypervisor and
a python script to split data into multiple files.
The file xencov.c is salvaged and modified from the original xencov.c.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
The internal data structure and code are tied to an old gcov format.
It's easier to just redo everything from scratch.
Salvage the reusable parts: leave xen/common/gcov and an empty Makefile
there, leave gcov support in Kconfig but mark that as broken. Also
reserve the sysctl number for later use (but delete relevant sysctl
structures).
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Add two new AVX512 subfeatures support for guest.
AVX512_4VNNIW:
Vector instructions for deep learning enhanced word variable precision.
AVX512_4FMAPS:
Vector instructions for deep learning floating-point single precision.
Signed-off-by: Luwei Kang <luwei.kang@intel.com>
Signed-off-by: He Chen <he.chen@linux.intel.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
That way we can print out the header if we are sure the
hypervisor has been compiled with Xen Livepatching.
Reviewed-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
There has not been any substantial update to them since 2011. My quick
check shows that they don't work.
Just delete them. It would be easy to resurrect them from git log should
people still need them.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Initialise j to 0 to make some versions of gcc (e.g., gcc4.5/4.3) happy to
avoid compilation error by commit beba3693f7.
Failure manifests with gcc 4.5 as:
[ 153s] cc1: warnings being treated as errors
[ 153s] xen-livepatch.c: In function 'main':
[ 153s] xen-livepatch.c:415:12: error: 'j' may be used uninitialized in this function
[ 153s] make[3]: *** [xen-livepatch.o] Error 1
Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Local variable "j" would be used only when "i == ARRAY_SIZE(main_options)"
is true. Thus, it is not necessary to update "j" when "i ==
ARRAY_SIZE(main_options)" is false.
Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Specifically:
s/\.xsplice/\.livepatch/
s/XSPLICE/LIVEPATCH/
s/xsplice/livepatch/
s/livepatch_patch_func/livepatch_func/
s/xSplice/Xen Live Patch/
s/livepatching/livepatch/
s/arch_livepatch_enter/arch_livepatch_quiesce/
s/arch_livepatch_exit/arch_livepatch_revive/
And then modify some of the function arguments
to have two more characters.
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Release-acked-by: Wei Liu <wei.liu2@citrix.com>
A simple tool that allows an system admin to perform
basic xsplice operations:
- Upload a xsplice file (with an unique name)
- List all the xsplice payloads loaded.
- Apply, revert, replace, or unload the payload using the
unique name.
- Do all two - upload, and apply the payload in one go (load).
Also will use the name of the file as the <name>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Release-acked-by: Wei Liu <wei.liu2@citrix.com>
It is able to reports the current featuresets; both the static masks and
dynamic featuresets from Xen, or to decode an arbitrary featureset into
`/proc/cpuinfo` style strings.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Commit 78c5f59e "x86/hvm/viridian: save APIC assist vector" changed
the name of a field in the viridian vcpu save record. Unfortunately this
record has a decode function in xen-hvmctx and so it no longer builds.
This patch fixes the field name in xen-hvmctx and also adds a decode of
the additional field that was added to the save record.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
After "Drop unused functions do_cstate and single_cstate helper" make
all the remaining functions and global data static and in the process
allow the compiler to notice that cond_rec_init() is also unused, thus
remove it.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
These have always been dead code since the code was added AFAICT.
This eliminates the code containing CID 10567079, 10567080, 10567081
and 10567082 (all apparently some confusion between max_cx_num vs
MAX_CX_NR, but given the lack of callers its hard to tell what was
intended)
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
libxenforeignmemory will provide a stable API and ABI for mapping
foreign domain memory (subject to appropriate privileges).
The new library exposes an interface equivalent to
xc_map_foreign_memory_bulk, which all the other
xc_map_foreign_memory_* functions (which remain in libxc) are
implemented in terms of.
Upon request (via #define XC_WANT_COMPAT_MAP_FOREIGN_API) libxenctrl
will provide a compat API for the old names. This is used by qemu-xen
and qemu-trad as well as various in tree things (which required
de-dupping various #includes in some too to get the #define before the
first).
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
[ ijc -- updated MINIOS_UPSTREAM_REVISION and QEMU_TRADITIONAL_REVISION ]
libxencall will provide a stable API and ABI for calling hypercalls
(although those hypercalls themselves may not have a stable API). As
well as the hypercall buffer infrastructure needed in order to safely
provide pointer arguments to hypercalls.
libxenctrl encapsulates a instance of this interface, so users of that
library are not currently subjected to any actual changes. However all
hypercalls made internally by libxc now use the correct interface. It
is expected that most users of this library will be other libraries
providing a higher level interface, rather than applications directly.
Only the basic functionality to allocate hypercall safe memory is
moved, the type safe stuff and bounce buffers remain in libxc.
Note that the functionality to map foreign pages using privcmd is not
yet moved, meaning that an xc_interface will now contain two open
privcmd file descriptors. Foreign memory mapping is logically separate
functionality and will be moved into its own library.
The new library uses a version script to ensure that only expected
symbols are exported and to version them such that ABI guarantees can
be kept in the future.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
[ ijc -- updated MINIOS_UPSTREAM_REVISION and QEMU_TRADITIONAL_REVISION ]
Andrew Cooper
Ian Jackson
Marek Marczykowski-Górecki
Jan Beulich
Dario Faggioli
Roger Pau Monné
Paul Durrant
Konrad Rzeszutek Wilk
Petre Pircalabu
Dongli Zhang
Wei Liu
Juergen Gross
Luwei Kang
Seraphime Kirkovski
Norbert Manthey
He Chen
Ross Lagerwall
Ian Campbell