Add support for changing max number of hypervisor leaves from configuration
file.
This number can be specified using xl's standard 'cpuid' option. Only lowest
8 bits of leaf's 0x4000xx00 eax register are processed, all others are ignored.
The changes allow us to revert commit 80ecb40362
which is most likely no longer needed now anyway (Solaris bug that it addressed
has been fixed and backported to earlier releases) but leave possibility of
running unpatched version of Solaris by forcing number of leaves to 2 in the
configuration file.
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Remove xc_hvm_[sg]et_mem_access() APIs which have been replaced by
xc_[sg]_mem_access() APIs.
Signed-off-by: Aravindh Puthiyaparambil <aravindp@cisco.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Modify the xen-access test program to use the new mem_access APIs.
Signed-off-by: Aravindh Puthiyaparambil <aravindp@cisco.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
xencommons creates the _hardcoded_ /var/run/xen already, there is no
need to create and package this directory during make install|rpmball.
Without this change installing the resulting xen.rpm will fail on
systems where /var/run is a symlink. rpm complains that '/var/run' (the
symlink) is already owned by some other system rpm package.
Using XEN_RUN_DIR instead of /var/run/xen tree-wide may be done in a
followup patch.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
pygrub stores the temporary kernel+initrd files in /var/run/pygrub, or
any other directory specified with --output-directory=<dir>. If the
default dir is missing pygrub will create it.
Without this change installing the resulting xen.rpm will fail on
systems where /var/run is a symlink. rpm complains that '/var/run' (the
symlink) is already owned by some other system rpm package.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
/var/lock/subsys is used only in tools/hotplug/Linux/init.d/xendomains.
The start() function already does a "mkdir /var/lock/subsys", so its not
required to create this directory during make install|rpmball.
Without this change installing the resulting xen.rpm will fail on
systems where /var/lock is a symlink. rpm complains that '/var/lock'
(the symlink) is already owned by some other system rpm package.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
xenstored already does "mkdir /var/run/xenstored" on startup, so its not
required to create this directory during make install|rpmball.
Without this change installing the resulting xen.rpm will fail on
systems where /var/run is a symlink. rpm complains that '/var/run' (the
symlink) is already owned by some other system rpm package.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
The manage-vtpmmgr.pl script is an example client for interacting with
the TPM Manager; it is intended to run in a management domain with a
vTPM (which may be dom0). It is used to create and manage vTPMs and
vTPM groups.
The calc.pl script is an example manager of a vTPM group. It signs
the configuration lists used by the TPM Manager with a locally held
private key.
Signed-off-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
The "A" constraint, while documented up to gcc 4.5 as "The a and d
registers, as a pair (for instructions that return half the result in
one and half in the other)," never really behaved that (natural) way,
but always meant (and is now also documented so) %eax _or_ %edx (%rax
_or_ %rdx on x86-64) unless the operand was wide enough to require both
(i.e. more than 32 bits on ix86 and more than 64 bits on x86-64).
Interestingly something internal to the compiler changed between 4.4
and 4.5 to actually expose the difference - up to gcc 4.4 I was unable
to construct a case where, when only the low half of the result is
actually looked at, the result would be considered to be in %edx/%rdx
(and %eax/%rax would be treated as unmodified by the instruction).
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Keir Fraser <keir@xen.org>
Tested-by: Don Slutz <dslutz@verizon.com>
The ifdef sections are not enabled at all in tree, and their justification is
out of date now that Xen hypercall support exists upstream in valgrind.
This also removes a commented-out tweak to CFLAGS in the libxc Makefile which
is not being used, and becomes stale given this patch. In the unlikely event
that any developers were using the line, the results can be more easily
achieved by tweaking APPEND_CFLAGS in the environment.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
CC: Ian Jackson <Ian.Jackson@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Fix two unfree()'d allocations in libxl-save-helper, to get them out of the
way of other legitimate complaints from valgrind.
The first is easy; close the interface to libxc when done with it.
The second can be fixed by removing the complexity of creating the logging
instance. Initialise the global 'logger' in place rather than as an
allocation, which requires changing the indirection of its use in 5 locations.
struct xentoollog_logger_tellparent and function createlogger_tellparent() are
now unused and removed.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Now we generate empty map for None, the empty Struct trick is not
necessary anymore.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Two changes included:
1. implement DEBUG_GEN_ALLOC for YAJL2
2. use size_t for variable "len"
without these two fixes it fails to compile when DEBUG_ANSWER is
defined.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Private types are only useful inside libxl. They don't have a valid JSON
generation function by default.
Currently there's only one private type, that's libxl_ev_link. Not
skipping this field causes testidl to fail as the code generated for
this type is NULL.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
- Remove version from installed package name, to make "upgrades" work
- Add conffiles to manage files in /etc on package install/update/remove
- Added in description that this is a .deb for testing only
Signed-off-by: Fabio Fantoni <fabio.fantoni@m2r.biz>
Acked-by: George Dunlap <george.dunlap@eu.citrix.com>
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
When dom0 is not the hardware domain, it can be destroyed in the same
way as any other service domain. To avoid accidental use when a domain
is not resolved, destroying domain 0 requires passing -f to xl destroy.
Since the hypervisor already prevents a domain from destroying itself,
this patch is only useful in a disaggregated environment.
Signed-off-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Keir Fraser <keir@xen.org>
314c9815e2 "tools: implement initial ramdisk support for ARM." broke starting
guests with <= 128 MB ram by placing the boot modules (dtb and initrd)
immediately after the kernel in this case, running the risk of them being
overwritten. Instead place the modules at the end of RAM, as the hypervisor
does for dom0.
The hypervisor also falls back to placing things before the kernel as a last
resort before failing, so add that here too.
Tested with the Debian installer initrd and guests of 96MB, 128MB, 256MB and
1GB. All work, also tested with 64MB but the installer doesn't run with so
little RAM (but our placement of the initrd is correct).
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Julien Grall <julien.grall@linaro.org>
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
This add a set of trace events that track the setup of various
emulated devices related to timers in domU.
This set is hpet, pit (i8253, i8254), rtc (MC146818), apic (lapic),
and pic (i8259). The pmtimer is not traced since it does not have a
changeable rate.
Signed-off-by: Don Slutz <dslutz@verizon.com>
Reviewed-by: Tim Deegan <tim@xen.org>
Acked-by: George Dunlap <george.dunlap@eu.citrix.com>
The ramdisk is passed to the kernel as a property in the chosen node of the
device tree. This is somewhat tricky since in order to place the ramdisk and
dtb in ram we first need to know the size of the dtb. So we initially create a
DTB with placeholders for the ramdisk and finalise the value (which doesn't
change the size) once we know where everything is.
Rename libxl__arch_domain_configure to xl__arch_domain_init_hw_description to
better reflect its use and to be consistent with the new
libxl__arch_domain_finalise_hw_description.
The common xc_dom_build_image() function did not support explicit placement of
the ramdisk, instead passing 0 to xc_dom_alloc_segment, meaning "pick
somewhere". This change instead passes ramdisk_seg.vstart. If nothing has set
vstart then it will be zero because the entire dom struct is zeroed on
allocation in xc_dom_allocate(). Therefore there is no change to the behaviour
on x86. This is also consistent with how other segments (kernel, dtb) are
handled.
Furthermore if the ramdisk has been explicitly placed then xc_dom_build_image()
assumes that it is not to be decompressed (since that would muck up the sizings
used on placement).
With all that I'm able to boot a domain using the current Debian Jessie armhf
installer initrd and have it complete successfully.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Julien Grall <julien.grall@linaro.org>
[ ijc -- s/itherwise/otherwise and dropped bogus emacs magic change ]
Intel recently released some new features, including RDSEED, ADX, and
PREFETCHW. This patch exposes these new features to pv and hvm.
Signed-off-by: Xudong Hao <xudong.hao@intel.com>
Signed-off-by: Liu Jinsong <jinsong.liu@intel.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Guest's configuration parameters (e.g. timer_mode) are used by the hypervisor
during runtime. We should therefore set them during restore.
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
print_special() uses the width argument to both select output format
and array size. So by passing 4 it expects an array of uint32_t.
But an array of uint64_t is passed.
So copy and mask the registers to 32 bits.
Signed-off-by: Don Slutz <dslutz@verizon.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Start with adding the code to the 64 bit path that the 32 bit path
has.
Next disable the "Stack Trace" or "Call Trace".
Finally allow stack dump.
Signed-off-by: Don Slutz <dslutz@verizon.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
This makes it easier to know which vcpu the registers belong to and
when not all vcpus are online, which vcpu it is.
Signed-off-by: Don Slutz <dslutz@verizon.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
For example can change:
gs: 0000 @ ffffffff803ac000/0000000000000000
to
gs: 0000 @ ffffffff803ac000/0000000000000000 boot_cpu_pda/
Signed-off-by: Don Slutz <dslutz@verizon.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
A new enum has been added to allow the caller to determine if this
kernel address is a text or data address. This is currenlty not
used, but will be in the next patch.
Add both _end and __bss_stop as kernel_end.
Signed-off-by: Don Slutz <dslutz@verizon.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Also switch from read_stack_word to read_mem_word since the provided
address may not be aligned.
Signed-off-by: Don Slutz <Don@CloudSwitch.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
To do this correctly the program name must be remembered since argv
is adjusted at the end of option parsing.
Switch all uses of argv[0] to prog.
Signed-off-by: Don Slutz <dslutz@verizon.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Currently not supported on ARM.
New routine read_mem_word() will correctly read a word that crosses
a page boundary. It will not fault if the 2nd page can not be
mapped.
Moved xenctx because guest_word_t is not defined where it was.
Here is an example:
Memory (address ffffffff803ddf90):
ffffffff80048d19 0000000000200800 ffffffff803e7801 0000000000086800
0000000000000000 ffffffff80430720 ffffffff803e722f 80008e000010019c
00000000ffffffff 0000000000000000 0000000000000000 0000000000200000
0000000000000000 0000000000000000 0000000000000000 00cf9b000000ffff
00af9b000000ffff 00cf93000000ffff 00cffb000000ffff 00cff3000000ffff
Signed-off-by: Don Slutz <Don@CloudSwitch.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
If specified, add stack address to dump.
This is not the default because the result exceeds 80 characters per line.
Here is an example:
Stack:
ffffffff803ddf90: ffffffff80048d19 0000000000200800 ffffffff803e7801 0000000000086800
ffffffff803ddfb0: 0000000000000000 ffffffff80430720 ffffffff803e722f 80008e000010019c
ffffffff803ddfd0: 00000000ffffffff 0000000000000000 0000000000000000 0000000000200000
ffffffff803ddff0: 0000000000000000 0000000000000000
Signed-off-by: Don Slutz <Don@CloudSwitch.com>
Reviewed-by: George Dunlap <george.dunlap@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
If specified, output ascii version of stack also.
This is not the default because the result exceeds 80 characters per line.
Here is an example:
Stack:
ffffffff80048d19 0000000000200800 ffffffff803e7801 0000000000086800 .......... ......x>......h......
0000000000000000 ffffffff80430720 ffffffff803e722f 80008e000010019c ........ .C...../r>.............
00000000ffffffff 0000000000000000 0000000000000000 0000000000200000 .......................... .....
0000000000000000 0000000000000000 ................
Signed-off-by: Don Slutz <Don@CloudSwitch.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
-b <bytes>, --bytes-per-line <bytes>
change the number of bytes per line output for Stack.
(default 32) Note: rounded to native size (4 or 8 bytes).
This option allows you to change the width of the output line. When
used with the -D option and/or -t, the output can be adjusted with
this to less then 80 columns.
-l <lines>, --lines <lines>
change the number of lines output for Stack. (default 5)
Can be specified as MAX. Note: Fewer lines will be output
if stack limit reached.
The default value show a reasonable amount of the raw stack. The -S
option will output all of it one line at a time. This can be used
to select something in the middle.
Signed-off-by: Don Slutz <dslutz@verizon.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Boris Ostrovsky
Aravindh Puthiyaparambil
Jan Beulich
Olaf Hering
Daniel De Graaf
Ian Campbell
Andrew Cooper
Wei Liu
Fabio Fantoni
Don Slutz
Liu Jinsong
Don Slutz