Boot self-tests (also referred to as boot-time tests or power-on
self-tests) are intended to check that Xen has configured the hardware
correctly before bringing up any domains.
Introduce tests to confirm that, using a dedicated SGI (GIC_SGI_TEST):
1. A cpu can send the SGI to itself
2. A cpu can send the SGI to another specific CPU (CPU0)
3. A cpu can send the SGI to all the other CPUs
Each CPU counts the test SGIs it takes. A sender samples those counters
before sending and then waits for the count of every CPU it targeted to
change, which is how it tells that the SGI was really delivered. The
counters are never reset, so comparing against a sample rather than an
absolute value keeps concurrent senders from disturbing each other. The
snapshot is allocated rather than kept on the stack, as NR_CPUS can be
large enough for such an array to overflow it.
A test reports a failure by panic(), so Xen never continues on a
platform where SGI delivery is broken. When the tests pass, Xen carries
on booting normally.
Also introduce a config CONFIG_BOOT_SELFTEST which enables these
tests. It depends on DEBUG and is off unless explicitly enabled.
Also introduce a boolean command line parameter "gic-test", so that a
build with CONFIG_BOOT_SELFTEST enabled can be shipped but the tests
selected at boot. It is documented in
docs/misc/xen-command-line.pandoc.
In order to keep all the boot self-tests together in the binary, a
separate section "initcallboottest" is introduced. Tests are registered
using __initcallboottest() and run once on every CPU by
do_init_boottests(), bracketed by begin/end messages. They run before
any domain is created on the primary core, and before the idle loop is
entered on a secondary core.
Signed-off-by: Ayan Kumar Halder <ayan.kumar.halder@amd.com>
Signed-off-by: Michal Orzel <michal.orzel@amd.com>
Reviewed-by: Julien Grall <julien@xen.org>
Addressing certain issues, in particular related to operations which may
take excessively long and therefore would need preemption, has turned out
overly costly. Since alternatives (HVM/PVH: HAP, PV: shim) are commonly
available, the decision was to deprecate the functionality, while still
retaining it for people to use at their own (security) risk. Memory-wise
small enough guests may still be okay to run.
Some CI testing depends on SHADOW_PAGING. Explicitly enable it when needed.
This is CVE-2026-42493 / XSA-495.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
The configuration uses a mix of dashes and underscores, which is irritating to
develop for. Switch to using the underscore form consistently; it is the more
common form and it has the benefit that it allows splitting on dashes to work
sensibly.
No functional change.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Denis Mukhin <dmukhin@ford.com>
Release-Acked-by: Oleksii Kurochko <oleksii.kurochko@gmail.com>
Perform standard syntax cleanup and make it a non-root container. Switch yajl
for json-c given the deprecation of the former. Drop dev86 which is an
x86-only dependency, and QEMU dependencies as we don't build QEMU in this
environment any more.
When updating the job names, also rename some for consistency so the arm64
fragment comes before the compiler.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Denis Mukhin <dmukhin@ford.com>
Release-Acked-by: Oleksii Kurochko <oleksii.kurochko@gmail.com>
Perform standard syntax cleanup and make it a non-root container. Switch yajl
for json-c given the deprecation of the former.
Add an x86_64 suffix for naming consistency with everything else.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Denis Mukhin <dmukhin@ford.com>
Release-Acked-by: Oleksii Kurochko <oleksii.kurochko@gmail.com>
Rename it to have an x86_64 suffix, updating the build job names and scheduled
rebuild task.
Apply standard cleanups. Trim the package list down to what is actually
needed. Archlinux's base-devel contains most libraries, but some of the
listed packages have never been dependenices for Xen, and a lot are QEMU
dependenices which aren't useful owing to the lack of the ninja package.
This shrinks the container from 533MB to 380MB.
No practical change.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Anthony PERARD <anthony.perard@vates.tech>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
Release-Acked-by: Oleksii Kurochko <oleksii.kurochko@gmail.com>
The default version of python is 3.13, so drop the 3.11 overrides.
Swap yajl for json-c, given the deprecation of the former. Add lz4.
bin86/dev86 are no longer available.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Denis Mukhin <dmukhin@ford.com>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
Release-Acked-by: Oleksii Kurochko <oleksii.kurochko@gmail.com>
Swap yajl for json-c, given the deprecation of the former. Add lz4.
Add 26.04 GCC/Clang debug/non-debug jobs. Drop the 24.04 debug jobs to keep
the overall job count down.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Denis Mukhin <dmukhin@ford.com>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
Release-Acked-by: Oleksii Kurochko <oleksii.kurochko@gmail.com>
This removes qemu-system-aarch64-6.0.0-*-export and fixes the outstanding
TODOs about efi-virtio.rom, now that the QEMU in use has it's /usr/share/
properly packaged.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Michal Orzel <michal.orzel@amd.com>
Exactly as per the Bookworm container, but additionally with the ipxe-qemu and
qemu-system-aarch64 packages. These will be used to remove the export jobs.
Switch qemu-arm{32,64} test jobs to use this container, and add two new build
tests.
No functional change.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Michal Orzel <michal.orzel@amd.com>
Rework the container to user heredocs for readability, derive from
bookworm-slim and use apt-get --no-install-recommends to keep the size down.
Additionally:
* Make it a non-root container.
* Drop libext2fs-dev which is an x86-only dependency.
* Add libncurses5-dev for xentop and zlib1g-dev which was missing from the
libxenguest decompressors.
* As there's no ninja, the container can no loger build QEMU so drop
libglib2.0-dev and libpixman-1-dev too.
* Swap libyajl-dev for libjson-c-dev given the deprecation of the former.
Rename the job to debian-12-arm64-* to follow the naming scheme of all the
other CI jobs.
This reduces the size of the debian:12-arm64v8 from 2.25GB down to 1.62GB.
Signed-off-by: Javi Merino <javi.merino@cloud.com>
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Michal Orzel <michal.orzel@amd.com>
Rework the container to user heredocs for readability, derive from
bookworm-slim and use apt-get --no-install-recommends to keep the size down.
Convert it to being a non-root container. Add checkpolicy as FLASK is an
available build option for arm32 under Randconfig testing.
Rename the CI jobs to debian-12-arm32-* to follow the naming scheme of all the
other CI jobs.
No functional change.
Signed-off-by: Javi Merino <javi.merino@cloud.com>
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Michal Orzel <michal.orzel@amd.com>
When one of the linking passes fails, additional intermediate files are
still in place. Having them available for analysis of the underlying
problem can be pretty helpful. Collect some into a new intermediates/
directory. (Nothing new will be collected if linking succeeds.)
As the script is run with -e passed to bash, defer exit if the main
"make" (or substituent script thereof) failed. This way more artifacts
are collected, potentially making it easier to analyze the failure.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Rework the container to derive from bookworm-slim, and to build and run
cppcheck as a normal user. User heredocs for readability and use apt-get
--no-install-recommends to keep the size down.
Changed the libpcre3-dev dependency to libpcre3, as the -dev package
is only needed for building, not for running.
Signed-off-by: Javi Merino <javi.merino@cloud.com>
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
With the imminent decommission of CirrusCI we will lose the limited macOS
build testing done there. Introduce two Gitlab macOS build jobs that
reproduce the ones present on CirrusCI.
According to the "Community programs" Gitlab documentation [0] we get
50,000 compute minutes per month. The arm64 job takes ~1m 15s, and the
x86_64 one ~2m. I think it's likely enough given the amount of minutes we
have available. We might need to reconsider if we add more tasks that
consume compute minutes.
[0] https://docs.gitlab.com/subscriptions/community_programs/#gitlab-for-open-source
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
When the variable is set, only build jobs that are used in tests are
scheduled. This saves a lot of time, for example when scheduling a test
pipeline with alternative linux branch.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Anthony PERARD <anthony.perard@vates.tech>
We'd rather have the full spelling in Kconfig. Adjusts every other
reference to the name too.
Not a functional change.
Signed-off-by: Alejandro Vallejo <alejandro.garciavallejo@amd.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
The selected jobs regex was assumed to be possibly empty in some places
and setting a default value for the regex caused the hardware jobs to
bypass some rules checks.
To fix this, adjust the rules to remove the check for empty and
instead just match the regex.
Fixes: 485ab1b5db
Signed-off-by: Victor Lira <victorm.lira@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
The original yocto config had a hidden default of allow_failure: true for the
manual job while the hidden default for rules is false. This causes the
stages with manual jobs to show as blocked.
Set it explicitly to true to avoid the analyze and build stages being shown as
blocked.
Fixes: 485ab1b5db
Signed-off-by: Victor Lira <victorm.lira@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Filtering jobs using the selected jobs regex is missing for
qemu-export + yocto jobs when running regular pipelines and eclair jobs
when running scheduled pipelines.
First, set a default value for the selected jobs regex to remove the
need to always check if the variable is empty.
Then add the missing rules to filter out those jobs.
Signed-off-by: Victor Lira <victorm.lira@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
With the exception of the custom IBT job, copy all Debian 12 jobs making
Debian 13 versions, then trim the Debian 12 ranconfig jobs.
Update the test jobs using Debian 12 to use 13.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Denis Mukhin <dmukhin@ford.com>
Reviewed-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
Everything works fine with Debian 13. Provide two new build jobs (for a total
of 6), and update the test jobs.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Denis Mukhin <dmukhin@ford.com>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
Everything works fine with Debian 13. Provide two new build jobs, and update
both the randconfig the test jobs.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Oleksii Kurochko <oleksii.kurochko@gmail.com>
Just like for RISCV and PPC, the earlier we enable the CI build the
better.
Signed-off-by: Michal Orzel <michal.orzel@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
All the x86 hardware runners are out of date, to varying degrees, in terms of
microcode.
Microcode must be uncompressed and prepended to the initrd in order for Xen to
be able to use it during early boot.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Anthony PERARD <anthony.perard@vates.tech>
Linux 6.6.56 was already added to test-artifacts for the argo testing, and
this removes one moving part while cleaning things up.
Drop the associated export job, and dockerfile.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Drop CentOS 7 entirely. It's way to old now.
Ubuntu 22.04 is the oldest Ubuntu with a suitable version of Clang, so swap
the 16.04 clang builds for 22.04.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
Reviewed-by: Anthony PERARD <anthony.perard@vates.tech>
Use more generic CONFIG_VM_EVENT name throughout Xen code instead of
CONFIG_MEM_ACCESS. This reflects the fact that vm_event is a higher level
feature, with mem_access & monitor depending on it.
Suggested-by: Tamas K Lengyel <tamas@tklengyel.com>
Acked-by: Tamas K Lengyel <tamas@tklengyel.com>
Signed-off-by: Sergiy Kibrik <Sergiy_Kibrik@epam.com>
There are two reasons for that:
1. In the README, GCC baseline is chosen to be 12.2, whereas Debian 11
uses GCC 10.2.1.
2. Xen requires mandatory some Z extensions, but GCC 10.2.1 does not
support Z extensions in -march, causing the compilation to fail.
Signed-off-by: Oleksii Kurochko <oleksii.kurochko@gmail.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Debugging sometimes involves running specific jobs on different
versions. It's useful to easily avoid running all of the not interesting
ones (for given case) to save both time and CI resources. Doing so used
to require changing the yaml files, usually in several places.
Ease this step by adding SELECTED_JOBS_ONLY variable that takes a regex.
Note that one needs to satisfy job dependencies on their own (for
example if a test job needs a build job, that specific build job
needs to be included too).
The variable can be specified via Gitlab web UI when scheduling a
pipeline, but it can be also set when doing git push directly:
git push -o ci.variable=SELECTED_JOBS_ONLY="/job1|job2/"
More details at https://docs.gitlab.co.jp/ee/user/project/push_options.html
The variable needs to include regex for selecting jobs, including
enclosing slashes.
A coma/space separated list of jobs to select would be friendlier UX,
but unfortunately that is not supported:
https://gitlab.com/gitlab-org/gitlab/-/issues/209904 (note the proposed
workaround doesn't work for job-level CI_JOB_NAME).
On the other hand, the regex is more flexible (one can select for
example all arm32 jobs).
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
Also enable -fno-sanitize=alignment like x86 since support for unaligned
accesses is guaranteed by the ISA and the existing OPAL setup code
relies on it.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Shawn Anastasio <sanastasio@raptorengineering.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
RISC-V has less complicated headers, so update ubsan.c to pull in everything
it needs. Provide dump_execution_state(), and update the printk() message to
make it more obvious that it's an outstanding task.
As with commit 8ef2ac727e ("automation: enable UBSAN for debug tests"),
enable UBSAN in RISC-V testing too.
No functional change.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Oleksii Kurochko <oleksii.kurochko@gmail.com>
Release-Acked-by: Oleksii Kurochko <oleksii.kurochko@gmail.com>
automation: enable UBSAN for debug tests
Enable CONFIG_UBSAN and CONFIG_UBSAN_FATAL for the ARM64 and x86_64
build jobs, with debug enabled, which are later used for Xen tests on
QEMU and/or real hardware.
Signed-off-by: Stefano Stabellini <stefano.stabellini@amd.com>
Reviewed-by: Michal Orzel <michal.orzel@amd.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
R-Acked-by: Oleksii Kurochko <oleksii.kurochko@gmail.com>
If randconfig enables coverage support the build times out due to GNU LD
taking too long. For the time being prevent coverage from being enabled in
clang randconfig job.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
Release-Acked-by: Oleksii Kurochko<oleksii.kurochko@gmail.com>
... and hook it up for RISC-V and PPC.
On RISC-V at least, no combination of headers pulls in errno.h, so include it
explicitly.
Guard the hypercalls array declaration based on NR_hypercalls existing. This
is sufficient to get PERF_COUNTERS fully working on RISC-V and PPC, so drop
the randconfig override.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Oleksii Kurohcko <oleksii.kurochko@gmail.com>
Except setting CONFIG_QEMU_PLATFORM=y in tiny64_defconfig,
CONFIG_QEMU_PLATFORM should be fixed for RISC-V's randconfig job.
Otherwise, an expected compilation error for RISC-V's randconfig job
will occur since clean_and_invalidate_dcache_va_range() and
clean_dcache_va_range() are currently implemented only for the QEMU
platform.
Additionally, sort the EXTRA_FIXED_RANDCONFIG list alphabetically.
Reported-by: Andrew Cooper <andrew.cooper3@citrix.com>
Fixes: f92e2709bd ("xen/riscv: implement data and instruction cache operations")
Signed-off-by: Oleksii Kurochko <oleksii.kurochko@gmail.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
This allow to change the registry used for container in a single
place, and could be controlled via other mean.
Signed-off-by: Anthony PERARD <anthony.perard@vates.tech>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Rework the container to be non-root, use heredocs for readability, and
use apt-get --no-install-recommends to keep the size down. Rename the
job to x86_32, to be consistent with XEN_TARGET_ARCH and the
naming scheme of all the other CI jobs:
${VERSION}-${ARCH}-${BUILD_NAME}
Remove build dependencies for building QEMU. The absence of ninja/meson means
that the container hasn't been able to build QEMU in years.
Remove build dependencies for the documentation as we don't have to
build it for every single arch.
This reduces the size of the container from 2.22GB to 1.32Gb.
Signed-off-by: Javi Merino <javi.merino@cloud.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Rework the container to use heredocs for readability, and use
apt-get --no-install-recommends to keep the size down.
This reduces the size of the (uncompressed) container from 3.44GB to
1.97GB.
The container is left running the builds and tests as root. A
subsequent patch will make the necessary changes to the test scripts
to allow test execution as a non-root user.
Signed-off-by: Javi Merino <javi.merino@cloud.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Add x86_64 hardware test that creates a Xen Argo communication
connection between two PVH domains. In the test, dom0 creates a domU and
listens for messages sent by the domU through Argo.
To accomplish this, build Xen with CONFIG_ARGO=y and create a CI test job.
Update the xilinx x86_64 test script to support the new test, and add
"sync_console" to command line to avoid an issue with console messages
being lost.
Requested-by: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: Victor Lira <victorm.lira@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Fedora 29 is long out of date. Move forward 5 years to Fedora 40.
Include all the usual improvements. Rework the container to be non-root, use
heredocs for legibility, and switch to the new naming scheme.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Javi Merino <javi.merino@cloud.com>
Reviewed-by: Anthony PERARD <anthony.perard@vates.tech>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
Ayan Kumar Halder