Commit df669de074 un-tracked the generated
Go code, but it was decided that we actually keep the generated code
in-tree.
Undo the changes to ignore the generated code, and re-generate it.
Signed-off-by: Nick Rosbrook <rosbrookn@ainfosec.com>
Reviewed-by: George Dunlap <george.dunlap@citrix.com>
The generated go files were tracked temporarily while the initial
implementation of gengotypes.py was in progress. They can now be removed
and ignored by git and hg.
While here, make sure generated files are removed by make clean.
Signed-off-by: Nick Rosbrook <rosbrookn@ainfosec.com>
Acked-by: Wei Liu <wl@xen.org>
Having Linux kernel drivers for 2.6 based kernels in the Xen tree is
not really needed any longer. So remove them from the tree.
In case anyone wants to look at them they are still available in
older branches.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Blktap2 is effectively dead for a few years.
Notable changes in this patch:
0. Unhook blktap2 from build system
1. libxl no longer supports TAP disk backend, with appropriate assertions
added and some code paths now return ERROR_FAIL
2. Tap is no longer a supported backend
3. Remove blktap2 entry from MAINTAINERS
A patch to remove blktap2 directory will come later.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Blktap2 is effectively dead code for a few years.
Notable changes in this patch:
0. Unhook blktap2 from build system
1. Now libxl no longer supports TAP disk backend, appropriate assertions
are added and some code paths now return ERROR_FAIL
2. Tap is no longer a supported backend in doc
3. Remove relevant entries in MAINTAINERS
A patch to actually remove blktap2 directory will come later.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: George Dunlap <George.Dunlap@eu.citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
There has not been any substantial update to them since 2011. My quick
check shows that they don't work.
Just delete them. It would be easy to resurrect them from git log should
people still need them.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
This was a C interface to a very early version of the XenAPI, it has not kept
up with developments to the API e.g. in xapi.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
I've retained xen.lowlevel.{xc,xs} since they seem more widely useful. I also
kept xen.lowlevel.xl even though it is disabled by default and IMHO useless in
its current form.
I've tried to clean up the various associated bits like example configs, init
scripts, udev rules etc but no doubt I have missed something, those can easily
be cleaned up later.
I've also removed xm-test since although it could in theory be reworked to
test xl it hasn't been touched for years. If someone wants to resurrect it
then they could do so via the git history.
This has been built but not runtime tested.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
---
v2: Clean out some .*ignore cruft
Remove some xm/xend docs.
Just a few things which I noticed which I'm sure aren't relevant now. I'm sure
there is plent of other cruft but I didn't do any sort of audit.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
We have defaulted to using the system libaio for a while now and I din't think
there are any relevant distros which don't have it that running Xen 4.4 would
be reasonable on.
Also it has caused confusion because it is not ever wanted on ARM, but the
build system doesn't express that (could be fixed, but deleting is the right
thing to do anyway).
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Matt Wilson <msw@amazon.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
This patch introduce coverage support to Xen.
Currently it allows to compile Xen with coverage support but there is no
way to extract them.
The declarations came from Linux source files (as you can see from file
headers).
The idea is to have some operations mainly
- get coverage information size
- read coverage information
- reset coverage counters
Linux use a file system to export these information. The information will
be a blob to handle with some tools (as usually tools require a bunch of
files but Xen does not handle files at all). I'll pack them to make things
simpler as possible.
These information cannot be put in a specific section (allowing a safe
mapping) as gcc use .rodata, .data, .text and .ctors sections.
I added code to handle constructors used in this case to initialize a
linked list of files.
I excluded %.init.o files as they are used before Xen start and should
not have section like .text or .data.
I used a "coverage" configuration option to mimic the "debug" one.
Signed-off-by: Frediano Ziglio <frediano.ziglio@citrix.com>
These files were left over after
$ git clean -f -dx
$ ./configure
$ make distclean
and picked up by a subsequent.
$ git clean -f -dx
Ensure that these files are also correctly ignored.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Roger Pau Monné <roger.pau@citrix.com>
Committed-by: Ian Campbell <ian.campbell@citrix.com>
It is sometimes hard to discover all the optional tools that should be
on a system to build all available Xen documentation. By checking for
documentation generation tools at ./configure time and displaying a
warning, Xen packagers will more easily learn about new optional build
dependencies, like markdown, when they are introduced.
Based on a patch by Matt Wilson. Changed to use a separate
docs/configure which is called from the top-level in the same manner
as stubdoms.
Rerun autogen.sh and "git add docs/configure" after applying this patch.
Signed-off-by: Matt Wilson <msw@amazon.com>
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Matt Wilson <msw@amazon.com>
(For the change to introduce docs/configure)
Acked-by: Roger Pau Monné <roger.pau@citrix.com>
Committed-by: Ian Campbell <ian.campbell@citrix.com>
Stub domains now use autoconf to build.
This configure script can enable or disable specific domains
and also specify custom download locations for stubdom library
packages. See ./configure --help for details.
C and Caml are disabled by default. vtpm-stubdom is conditional
on the presense of cmake.
Rename vtpmmgrdom to vtpmmgr-stubdom
Also update .*ignore
Signed-off-by: Matthew Fioravante <matthew.fioravante@jhuapl.edu>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Ian Campbell <ian.campbell@citrix.com>
Add 3 new libraries to stubdom:
libgmp
polarssl
Berlios TPM Emulator 0.7.4
Add makefile structure for vtpm and vtpmmgrdom. Both
vtpm domains are optional builds as vtpm depends on
cmake. To build either of them, you must do so explicitly.
make vtpm-stubdom vtpmmgrdom
Finally, also update .*ignore
Signed-off-by: Matthew Fioravante <matthew.fioravante@jhuapl.edu>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
[ijc, folded in fix from Matthew to workaround cmake 2.8.2 build failure]
Committed-by: Ian Campbell <ian.campbell@citrix.com>
Rather than keeping around headers that are autogenerated in order to
avoid adding build dependencies from xen/ to files in tools/, move the
relevant parts of the FLASK policy into the hypervisor tree and
generate the headers as part of the hypervisor's build.
Signed-off-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Committed-by: Keir Fraser <keir@xen.org>
Touch the libxl.api-ok stamp file, and unconditionally put in place
the new _libxl.api-for-check. This avoids needlessly rerunning the
preprocessor on libxl.h each time we call "make".
Ensure that _libxl.api-for-check gets the CFLAGS used for xl, so that
if it is asked for in a standalone make run it can find xentoollog.h.
Remove *.api-ok on clean.
Also fix .gitignore.
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Ian Campbell <ian.campbell@citrix.com>
libxl_internal.h says:
* Functions using LIBXL__INIT_EGC may *not* generally be called from
* within libxl, because libxl__egc_cleanup may call back into the
* application. ...
and
* ... [Functions which take an ao_how] MAY NOT
* be called from inside libxl, because they can cause reentrancy
* callbacks.
However, this was not enforced. Particularly the latter restriction
is easy to overlook, especially since during the transition period to
the new event system we have bent this rule a couple of times, and the
bad pattern simply involves passing 0 or NULL for the ao_how.
So use the compiler to enforce this property, as follows:
- Mark all functions which take a libxl_asyncop_how, or which
use EGC_INIT or LIBXL__INIT_EGC, with a new annotation
LIBXL_EXTERNAL_CALLERS_ONLY in the public header.
- Change the documentation comment for asynch operations and egcs to
say that this should always be done.
- Arrange that if libxl.h is included via libxl_internal.h,
LIBXL_EXTERNAL_CALLERS_ONLY expands to __attribute__((warning(...))),
which generates a message like this:
libxl.c:1772: warning: call to 'libxl_device_disk_remove'
declared with attribute warning:
may not be called from within libxl
Otherwise, the annotation expands to nothing, so external
callers are unaffected.
- Forbid inclusion of both libxl.h and libxl_internal.h unless
libxl_internal.h came first, so that the above check doesn't have
any loopholes. Files which include libxl_internal.h should not
include libxl.h as well.
This is enforced explicitly using #error. However, in practice
with the current tree it just changes the error message when this
mistake is made; otherwise we would carry on to immediately
following #define which would cause the compiler to complain that
LIBXL_EXTERNAL_CALLERS_ONLY was redefined. Then the developer
might be tempted to add a #ifndef which would be wrong - it would
leave the affected translation unit unprotected by the new
enforcement regime. So let's be explicit.
- Fix the one source of files which violate the above principle, the
output from the idl compiler, by removing the redundant inclusion
of libxl.h from the output.
Also introduce a new script "check-libxl-api-rules" which contains
some ad-hoc regexps to spot and complain when libxl.h contains
functions which mention libxl_asyncop_how but not
LIBXL_EXTERNAL_CALLERS_ONLY. This isn't a full C parser but is likely
to get the common cases right and err on the side of complaining.
While we are here, the invocation of perl for the bsd queue.h seddery
to $(PERL).
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Cc: Roger Pau Monne <roger.pau@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Ian Campbell <ian.campbell@citrix.com>
Newer ocaml toolchains generate .spot and .spit files which are ocaml metadata
about their respective source files.
Add them to the clean rules as well as the .{hg,git}ignore files.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Committed-by: Ian Campbell <ian.campbell@citrix.com>
libxenctrl expects to be able to simply run the save or restore
operation synchronously. This won't work well in a process which is
trying to handle multiple domains.
The options are:
- Block such a whole process (eg, the whole of libvirt) while
migration completes (or until it fails).
- Create a thread to run xc_domain_save and xc_domain_restore on.
This is quite unpalatable. Multithreaded programming is error
prone enough without generating threads in libraries, particularly
if the thread does some very complex operation.
- Fork and run the operation in the child without execing. This is
no good because we would need to negotiate with the caller about
fds we would inherit (and we might be a very large process).
- Fork and exec a helper.
Of these options the latter is the most palatable.
Consequently:
* A new helper program libxl-save-helper (which does both save and
restore). It will be installed in /usr/lib/xen/bin. It does not
link against libxl, only libxc, and its error handling does not
need to be very advanced. It does contain a plumbing through of
the logging interface into the callback stream.
* A small ad-hoc protocol between the helper and libxl which allows
log messages and the libxc callbacks to be passed up and down.
Protocol doc comment is in libxl_save_helper.c.
* To avoid a lot of tedium the marshalling boilerplate (stubs for the
helper and the callback decoder for libxl) is generated with a
small perl script.
* Implement new functionality to spawn the helper, monitor its
output, provide responses, and check on its exit status.
* The functions libxl__xc_domain_restore_done and
libxl__xc_domain_save_done now turn out to want be called in the
same place. So make their state argument a void* so that the two
functions are type compatible.
The domain save path still writes the qemu savefile synchronously.
This will need to be fixed in a subsequent patch.
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
25479:61dfb3da56b0 added a .PRECIOUS which causes these files to be
left over more often. They should have been ignored already, though.
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
This test script runs "xl -N network-attach 0 <foobar>" against various
rate syntax and checks that the output is as expected.
[ Added entries to .hgignore and .gitignore for tools/libxl/tmp.* -iwj ]
Signed-off-by: Mathieu Gagne <mgagne@iweb.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
Since the introduction of autoconf, builds with XSM enabled in .config
have been broken unless FLASK_ENABLE was explicitly set. Since the
setting in .config has apparently been deprecated in favor of an
autoconf --enable-xsm, add config/Xen.mk to export this to Xen. This
also makes --disable-debug and some paths to be pulled from the
configure process in the hypervisor build.
Signed-off-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Committed-by: Keir Fraser <keir@xen.org>
Added autotools magic to replace custom check scripts. The previous
checks have been ported to autoconf, and some additional ones have
been added (plus the suggestions from running autoscan). Two files are
created as a result from executing configure script, config/Tools.mk
and config.h.
conf/Tools.mk is included by tools/Rules.mk, and contains most of the
options previously defined in .config, that can now be set passing
parameters or defining environment variables when executing configure
script.
config.h is only used by libxl/xl to detect yajl_version.h.
[ tools/config.sub and config.guess copied from
autotools-dev 20100122.1 from Debian squeeze i386,
which is GPLv2.
tools/configure generated using the included ./autogen.sh
which ran autoconf 2.67-2 from Debian squeeze i386. autoconf
is GPLv3+ but has a special exception for the autoconf output;
this exception applies to us and exempts us from complying
with GPLv3+ for configure, which is good as Xen is GPL2 only.
- Ian Jackson ]
Signed-off-by: Roger Pau Monne <roger.pau@entel.upc.edu>
Tested-by: Ian Jackson <ian.jackson@eu.citrix.com>
Committed-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
The latter is GPL which makes the whole of mini-os GPL rather than BSD
as intended. In tree users are all GPL or GPL-compatible but we should
fix this so that mini-os is BSD. Do so by using the same BSD
sys/queue.h as we use in libxl.
Tested with the builtin mini-os test app and qemu stubdomain, both of which
appear to still function as expected.
Move tools/libxl/external and the associated sed script to
tools/include/xen-external to allow more sensible access from mini-os.
Also add s/NULL/0/ in the sed script due to NULL not always being
defined in stubdom code when mini-os/wait.h is included.
As well as the obvious ABI changes there are a few API updates
associated with the change:
- struct rw_semaphore.wait_list is unused
- remove_waiter needs to take the wait_queue_head
The latter requires a qemu update, so there is also a QEMU_TAG
update in this changeset.
I sprinkled some extra-emacs local variables around the files I edited
which didn't have them.
I think this should be backported to the stable branches since
external users of mini-os may have been mislead into thinking they
could safely link mini-os against GPL-incompatible code.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
This is demo code meant to showcase how to perform sharing
operations. It is useful for testing.
[ Added appropriate lines to .hgignore and .gitignore -iwj ]
Signed-off-by: Adin Scannell <adin@scannell.ca>
Signed-off-by: Andres Lagar-Cavilla <andres@lagarcavilla.org>
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
* Add new seabios clone directories to .gitignore.
* Add new qemu clone directories to .gitignore.
* Remove old tools/ioemu (long-obsolete) from .gitignore and .hgignore.
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Nick Rosbrook