Set the grant table version for the created domains to use version 1,
as such tests domains don't require the usage of the grant table at
all. A TODO note is added to switch those dummy domains to not have a
grant table at all when possible. Without setting the grant version
the domains for the tests cannot be created.
Fixes: 7379f9e10a ('gnttab: allow setting max version per-domain')
Reported-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reported-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Release-Acked-by: Ian Jackson <iwj@xenproject.org>
Set the grant table version for the created domains to use version 1,
as that's the used by the test cases. Without setting the grant
version the domains for the tests cannot be created.
Fixes: 7379f9e10a ('gnttab: allow setting max version per-domain')
Reported-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Release-Acked-by: Ian Jackson <iwj@xenproject.org>
Such macro just clamps the passed version to fit in the designated
bits of the domctl field. The main purpose is to make it clearer in
the code when max grant version is being set in the grant_opts field.
Existing users that where setting the version in the grant_opts field
are switched to use the macro.
No functional change intended.
Requested-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Bertrand Marquis <bertrand.marquis@arm.com>
Acked-by: Julien Grall <jgrall@amazon.com>
Reviewed-by: Ian Jackson <iwj@xenproject.org>
Release-Acked-by: Ian Jackson <iwj@xenproject.org>
Previously, we checked that we could map 40 pages with nothing
complaining. Now we're adding extra logic to check that those 40
frames are "correct".
Suggested-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Jane Malalane <jane.malalane@citrix.com>
Release-Acked-by: Ian Jackson <iwj@xenproject.org>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
CPUID policies from guest being migrated shouldn't have the maximum
leaves shrink, as that would be a guest visible change. The hypervisor
has no knowledge on whether a guest has been migrated or is build from
scratch, and hence it must not blindly shrink the CPUID policy in
recalculate_cpuid_policy. Remove the
x86_cpuid_policy_shrink_max_leaves call from recalculate_cpuid_policy.
Removing such call could be seen as a partial revert of 540d911c28.
Instead let the toolstack shrink the policies for newly created
guests, while keeping the previous values for guests that are migrated
in. Note that guests migrated in without a CPUID policy won't get any
kind of shrinking applied.
Fixes: 540d911c28 ('x86/CPUID: shrink max_{,sub}leaf fields according to actual leaf contents')
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Release-Acked-by: Ian Jackson <iwj@xenproject.org>
iPXE is only used by QEMU traditional, so make it off by default
unless QEMU traditional is enabled.
Reported-by: Andrew Cooper <andrew.cooper3@citrix.com>
Fixes: bcf77ce510 ('configure: modify default of building rombios')
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Release-Acked-by: Ian Jackson <iwj@xenproject.org>
Reviewed-by: Ian Jackson <iwj@xenproject.org>
Introduce a new domain create field so that toolstack can specify the
maximum grant table version usable by the domain. This is plumbed into
xl and settable by the user as max_grant_version.
Previously this was only settable on a per host basis using the
gnttab command line option.
Note the version is specified using 4 bits, which leaves room to
specify up to grant table version 15. Given that we only have 2 grant
table versions right now, and a new version is unlikely in the near
future using 4 bits seems more than enough.
xenstored stubdomains are limited to grant table v1 because the
current MiniOS code used to build them only has support for grants v1.
There are existing limits set for xenstored stubdomains at creation
time that already match the defaults in MiniOS.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Christian Lindig <christian.lindig@citrix.com>
Reviewed-by: Ian Jackson <iwj@xenproject.org>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Release-Acked-by: Ian Jackson <iwj@xenproject.org>
In order to let the toolstack be able to set the gnttab version on a
per-domain basis, it needs to know which ABIs Xen supports. Introduce
XEN_SYSCTL_PHYSCAP_gnttab_v{1,2} for the purpose, and plumb in down into
userspace.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Christian Lindig <christian.lindig@citrix.com>
Reviewed-by: Ian Jackson <iwj@xenproject.org>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Releae-Acked-by: Ian Jackson <iwj@xenproject.org>
Using qemu-traditional as device model is deprecated for some time now.
So change the default for building it to "disable". This will affect
ioemu-stubdom, too, as there is a direct dependency between the two.
Today it is possible to use a PVH/HVM Linux-based stubdom as device
model. Additionally using ioemu-stubdom isn't really helping for
security, as it requires to run a very old and potentially buggy qemu
version in a PV domain. This is adding probably more security problems
than it is removing by using a stubdom.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Acked-by: Ian Jackson <iwj@xenproject.org>
Release-acked-by: Ian Jackson <iwj@xenproject.org>
The tools/configure script will default to build rombios if qemu
traditional is enabled. If rombios is being built, ipxe will be built
per default, too.
This results in rombios and ipxe no longer being built by default when
disabling qemu traditional.
Fix that be rearranging the dependencies:
- build ipxe by default
- build rombios by default if either ipxe or qemu traditional are
being built
This modification prepares not building qemu traditional by default
without affecting build of rombios and ipxe.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Ian Jackson <iwj@xenproject.org>
Release-acked-by: Ian Jackson <iwj@xenproject.org>
Commit 1787cc1679 ("libs/guest: Move the guest ABI check earlier
into xc_dom_parse_image()") broke starting the xenstore stubdom. This
is due to a rather special way the xenstore stubdom domain config is
being initialized: in order to support both, PV and PVH stubdom,
init-xenstore-domain is using xc_dom_parse_image() to find the correct
domain type. Unfortunately above commit requires xc_dom_boot_xen_init()
to have been called before using xc_dom_parse_image(). This requires
the domid, which is known only after xc_domain_create(), which requires
the domain type.
In order to break this circular dependency, call xc_dom_boot_xen_init()
with an arbitrary domid first, and then set dom->guest_domid later.
Fixes: 1787cc1679 ("libs/guest: Move the guest ABI check earlier into xc_dom_parse_image()")
Signed-off-by: Juergen Gross <jgross@suse.com>
Release-acked-by: Ian Jackson <iwj@xenproject.org>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Using qemu-traditional as device model is deprecated for some time now.
So change the default for building it to "disable". This will affect
ioemu-stubdom, too, as there is a direct dependency between the two.
Today it is possible to use a PVH/HVM Linux-based stubdom as device
model. Additionally using ioemu-stubdom isn't really helping for
security, as it requires to run a very old and potentially buggy qemu
version in a PV domain. This is adding probably more security problems
than it is removing by using a stubdom.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Acked-by: Ian Jackson <iwj@xenproject.org>
Release-Acked-by: Ian Jackson <iwj@xenproject.org>
Commit 939775cfd3 "handle dying domains in live update" was meant to
handle gracefully dying domain. However, the @releaseDomain watch
will end up to be sent as soon as we finished to restore Xenstored
state.
This may be before Xen reports the domain to be dying (such as if
the guest decided to revoke access to the xenstore page). Consequently
daemon like xenconsoled will not clean-up the domain and it will be
left as a zombie.
To avoid the problem, mark the connection as ignored. This also
requires to tweak conn_can_write() and conn_can_read() to prevent
dereferencing a NULL pointer (the interface will not mapped).
The check conn->is_ignored was originally added after the callbacks
because the helpers for a socket connection may close the fd. However,
ignore_connection() will close a socket connection directly. So it is
fine to do the re-order.
Signed-off-by: Julien Grall <jgrall@amazon.com>
Release-Acked-by: Ian Jackson <iwj@xenproject.org>
Reviewed-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Luca Fancellu <luca.fancellu@arm.com>
Commit f282182af3 ("tools/xenstore: set oom score for xenstore
daemon on Linux") introduced a regression when not setting the oom
value in the xencommons file. Fix that.
Fixes: f282182af3 ("tools/xenstore: set oom score for xenstore daemon on Linux")
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Ian Jackson <iwj@xenproject.org>
Release-Acked-by: Ian Jackson <iwj@xenproject.org>
Xenstored is absolutely mandatory for a Xen host and it can't be
restarted, so being killed by OOM-killer in case of memory shortage is
to be avoided.
Set /proc/$pid/oom_score_adj (if available) per default to -500 (this
translates to 50% of dom0 memory size) in order to allow xenstored to
use large amounts of memory without being killed.
The percentage of dom0 memory above which the oom killer is allowed to
kill xenstored can be set via XENSTORED_OOM_MEM_THRESHOLD in
xencommons.
Make sure the pid file isn't a left-over from a previous run delete it
before starting xenstored.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Ian Jackson <iwj@xenproject.org>
Release-Acked-by: Ian Jackson <iwj@xenproject.org>
libxl will create an emulated PCI device tree node in the device tree to
enable the guest OS to discover the virtual PCI during guest boot.
Emulated PCI device tree node will only be created when there is any
device assigned to guest.
A new area has been reserved in the arm guest physical map at
which the VPCI bus is declared in the device tree (reg and ranges
parameters of the node).
Note that currently we are using num_pcidevs instead of
c_info->passthrough to decide whether to create a vPCI DT node.
This will be insufficient if and when ARM does PCI hotplug.
Add this note inside libxl_create.c where c_info->passthrough
is set.
Signed-off-by: Rahul Singh <rahul.singh@arm.com>
Signed-off-by: Michal Orzel <michal.orzel@arm.com>
Signed-off-by: Bertrand Marquis <bertrand.marquis@arm.com>
Reviewed-by: Julien Grall <jgrall@amazon.com>
Acked-by: Ian Jackson <iwj@xenproject.org>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
... to take a second argument of type libxl_domain_config*
rather than libxl_domain_build_info*.
This change will be needed to get access from
libxl__prepare_dtb to "num_pcidevs" field of
libxl_domain_config to check whether to create
a vPCI DT node or not.
Signed-off-by: Michal Orzel <michal.orzel@arm.com>
Signed-off-by: Bertrand Marquis <bertrand.marquis@arm.com>
Suggested-by: Ian Jackson <iwj@xenproject.org>
Reviewed-by: Ian Jackson <iwj@xenproject.org>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
... to take a second argument of type libxl_domain_config*
rather than libxl_domain_build_info*.
We need to pass the whole libxl_domain_config
structure as this will be needed later on to modify
the libxl__prepare_dtb function to also take
libxl_domain_config.
Signed-off-by: Michal Orzel <michal.orzel@arm.com>
Signed-off-by: Bertrand Marquis <bertrand.marquis@arm.com>
Suggested-by: Ian Jackson <iwj@xenproject.org>
Reviewed-by: Ian Jackson <iwj@xenproject.org>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
The extended region (safe range) is a region of guest physical
address space which is unused and could be safely used to create
grant/foreign mappings instead of wasting real RAM pages from
the domain memory for establishing these mappings.
The extended regions are chosen at the domain creation time and
advertised to it via "reg" property under hypervisor node in
the guest device-tree. As region 0 is reserved for grant table
space (always present), the indexes for extended regions are 1...N.
If extended regions could not be allocated for some reason,
Xen doesn't fail and behaves as usual, so only inserts region 0.
Please note the following limitations:
- The extended region feature is only supported for 64-bit domain
currently.
- The ACPI case is not covered.
***
The algorithm to choose extended regions for non-direct mapped
DomU is simpler in comparison with the algorithm for direct mapped
Dom0. We usually have a lot of unused space above 4GB, and might
have some unused space below 4GB (depends on guest memory size).
Try to allocate separate 2MB-aligned extended regions from the first
(below 4GB) and second (above 4GB) RAM banks taking into the account
the maximum supported guest physical address space size and the amount
of memory assigned to the guest. The minimum size of extended region
the same as for Dom0 (64MB).
Please note, we introduce fdt_property_reg_placeholder helper which
purpose is to create N ranges that are zeroed. The interesting fact
is that libfdt already has fdt_property_placeholder(). But this was
introduced only in 2017, so there is a risk that some distros may not
ship the last libfdt version. This is why we implement our own light
variant for now.
Suggested-by: Julien Grall <jgrall@amazon.com>
Signed-off-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Reviewed-by: Julien Grall <jgrall@amazon.com>
Acked-by: Ian Jackson <iwj@xenproject.org>
We need to pass info about maximum supported guest physical
address space size to the toolstack on Arm in order to properly
calculate the base and size of the extended region (safe range)
for the guest. The extended region is unused address space which
could be safely used by domain for foreign/grant mappings on Arm.
The extended region itself will be handled by the subsequent
patch.
Currently the same guest physical address space size is used
for all guests (p2m_ipa_bits variable on Arm, the x86 equivalent
is hap_paddr_bits).
Add an explicit padding after "gpaddr_bits" field and also
(while at it) after "domain" field.
Also make sure that full structure is cleared in all cases by
moving the clearing into getdomaininfo(). Currently it is only
cleared by the sysctl caller (and only once).
Please note, we do not need to bump XEN_DOMCTL_INTERFACE_VERSION
as a bump has already occurred in this release cycle. But we do
need to bump XEN_SYSCTL_INTERFACE_VERSION as the structure is
re-used in a sysctl.
Suggested-by: Julien Grall <jgrall@amazon.com>
Signed-off-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Reviewed-by: Ian Jackson <iwj@xenproject.org>
[hypervisor parts]
Reviewed-by: Jan Beulich <jbeulich@suse.com>
This reverts commit 2075b410ee.
During the discussion [1] that took place after
the patch was merged it was agreed that it should
be reverted to avoid introducing a bad interface.
Furthermore, the patch rejected usage of flag
XEN_DOMCTL_CDF_vpci for x86 which is not true
as it should be set for dom0 PVH.
Due to XEN_DOMCTL_CDF_vpmu being introduced after
XEN_DOMCTL_CDF_vpci, modify its bit position
from 8 to 7.
[1] https://marc.info/?t=163354215300039&r=1&w=2
Signed-off-by: Michal Orzel <michal.orzel@arm.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Christian Lindig <christian.lindig@citrix.com<mailto:christian.lindig@citrix.com>>
Acked-by: Julien Grall <jgrall@amazon.com>
Reviewed-by: Bertrand Marquis <bertrand.marquis@arm.com>
Add parameter vpmu to xl domain configuration syntax
to enable the access to PMU registers by disabling
the PMU traps(currently only for ARM).
The current status is that the PMU registers are not
virtualized and the physical registers are directly
accessible when this parameter is enabled. There is no
interrupt support and Xen will not save/restore the
register values on context switches.
According to Arm Arm, section D7.1:
"The Performance Monitors Extension is common
to AArch64 operation and AArch32 operation."
That means we have an ensurance that if PMU is
present in one exception state, it must also be
present in the other.
Please note that this feature is experimental.
Signed-off-by: Michal Orzel <michal.orzel@arm.com>
Signed-off-by: Julien Grall <julien@xen.org>
Reviewed-by: Bertrand Marquis <bertrand.marquis@arm.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Ian Jackson <iwj@xenproject.org>
Introduce flag XEN_SYSCTL_PHYSCAP_vpmu which
indicates whether the platform supports vPMU
functionality. Modify Xen and tools accordingly.
Take the opportunity and fix XEN_SYSCTL_PHYSCAP_vmtrace
definition in sysctl.h which wrongly use (1 << 6)
instead of (1u << 6).
Signed-off-by: Michal Orzel <michal.orzel@arm.com>
Reviewed-by: Bertrand Marquis <bertrand.marquis@arm.com>
Acked-by: Nick Rosbrook <rosbrookn@ainfosec.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Acked-by: Ian Jackson <iwj@xenproject.org>
Acked-by: Christian Lindig <christian.lindig@citrix.com>
This regex is used for auto-balloon mode detection based on Xen command line.
The case of specifying a negative size was handled incorrectly.
>From misc/xen-command-line documentation:
dom0_mem (x86)
= List of ( min:<sz> | max:<sz> | <sz> )
If a size is positive, it represents an absolute value.
If a size is negative, it is subtracted from the total available memory.
Also add support for [tT] granularity suffix.
Also add support for memory fractions (i.e. '50%' or '1G+25%').
Signed-off-by: Dmitry Isaykin <isaikin-dmitry@yandex.ru>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Arm's PCI passthrough implementation doesn't support legacy interrupts,
but MSI/MSI-X. This can be the case for other platforms too.
For that reason introduce a new CONFIG_PCI_SUPP_LEGACY_IRQ and add
it to the CFLAGS and compile the relevant code in the toolstack only if
applicable.
Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
[stefano: minor change to Makefile]
Signed-off-by: Stefano Stabellini <stefano.stabellini@xilinx.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Reviewed-by: Rahul Singh <rahul.singh@arm.com>
Tested-by: Rahul Singh <rahul.singh@arm.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
This patch replaces the usage of xc_map_foreign_range with
xenforeignmemory_map from the stable xenforeignmemory library. Note
there are still other uses of libxc functions which prevents removing
the dependency.
No functional change intended.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Ian Jackson <iwj@xenproject.org>
Introduce XEN_DOMCTL_CDF_vpci flag to enable VPCI support in XEN.
Reject the use of this new flag for x86 as VPCI is not supported for
DOMU guests for x86.
Signed-off-by: Rahul Singh <rahul.singh@arm.com>
[stefano: drop _XEN_DOMCTL_CDF_vpci]
Signed-off-by: Stefano Stabellini <stefano.stabellini@xilinx.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Acked-by: Christian Lindig <christian.lindig@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Running $(MAKE) like that in a $(shell ) while parsing the Makefile
doesn't work reliably. In some case, make will complain with
"jobserver unavailable: using -j1. Add '+' to parent make rule.".
Also, it isn't possible to distinguish between the output produced by
the target "xenversion" and `make`'s own output.
Instead of running make, this patch "improve" `version.sh` to try to
guess the output of `make xenversion`.
In order to have version.sh works in more scenario, it will use
XEN_EXTRAVERSION and XEN_VENDORVERSION from the environment when
present. As for the cases were those two variables are overridden by a
make command line arguments, we export them when invoking version.sh
via a new $(XEN_FULLVERSION) macro.
That should hopefully get us to having ./version.sh returning the same
value that `make xenversion` would.
This fix GitLab CI's build job "debian-unstable-gcc-arm64".
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Daniel P. Smith <dpsmith@apertussolutions.com>
Reviewed-by: Ian Jackson <iwj@xenproject.org>
In case abi-dumper is available the stubdom builds will fail due to a
false dependency on dynamic loadable libraries. Fix that.
Fixes: d7c9f7a7a3 ("tools/libs: Write out an ABI analysis when abi-dumper is available")
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
The memory allocator currently calculates alignment in libxl's virtual
address space, rather than guest physical address space. This results
in the FACS being commonly misaligned.
Furthermore, the allocator has several other bugs.
The opencoded align-up calculation is currently susceptible to a bug
that occurs in the corner case that the buffer is already aligned to
begin with. In that case, an align-sized memory hole is introduced.
The while loop is dead logic because its effects are entirely and
unconditionally overwritten immediately after it.
Rework the memory allocator to align in guest physical address space
instead of libxl's virtual memory and improve the calculation, drop
errant extra page in allocated buffer for ACPI tables, and give some
of the variables better names/types.
Fixes: 14c0d328da ("libxl/acpi: Build ACPI tables for HVMlite guests")
Signed-off-by: Kevin Stefanov <kevin.stefanov@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Ian Jackson <iwj@xenproject.org>
There is a step change in speculation protections between the Zen1 and Zen2
microarchitectures.
Zen1 and older have no special support. Control bits in non-architectural
MSRs are used to make lfence be dispatch-serialising (Spectre v1), and to
disable Memory Disambiguation (Speculative Store Bypass). IBPB was
retrofitted in a microcode update, and software methods are required for
Spectre v2 protections.
Because the bit controlling Memory Disambiguation is model specific,
hypervisors are expected to expose a MSR_VIRT_SPEC_CTRL interface which
abstracts the model specific details.
Zen2 and later implement the MSR_SPEC_CTRL interface in hardware, and
virtualise the interface for HVM guests to use. A number of hint bits are
specified too to help guide OS software to the most efficient mitigation
strategy.
Zen3 introduced a new feature, Predictive Store Forwarding, along with a
control to disable it in sensitive code.
Add CPUID and VMCB details for all the new functionality.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
AMD Zen3 adds the NullSelectorClearsBase bit to indicate that loading
a NULL segment selector zeroes the base and limit fields, as well as
just attributes.
Expose bit to all guests.
Suggested-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Jane Malalane <jane.malalane@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Old enough glibc has clock_gettime() in librt.so, hence the library
needs to be specified to the linker. Newer glibc has the symbol
available in both libraries, so make sure that libc.so is preferred (to
avoid an unnecessary dependency on librt.so).
Fixes: 93c9edbef5 ("tests/xenstore: Rework Makefile")
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Acked-by: Ian Jackson <iwj@xenproject.org>
For one xc_private.h needlessly repeats xen-tools/libs.h's definition.
And then there are two suspicious uses (resulting from the inconsistency
with the respective 2nd parameter of DIV_ROUNDUP()): While the one in
tools/console/daemon/io.c - as per the code comment - intentionally uses
8 as the second argument (meaning to align to a multiple of 256), the
one in alloc_magic_pages_hvm() pretty certainly does not: There the goal
is to align to a uint64_t boundary, for the following module struct to
end up aligned.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Acked-by: Ian Jackson <iwj@xenproject.org>
For log-dirty operations a 64-bit field is being truncated to become an
"int" return value. Seeing the large number of arguments the present
function takes, reduce its set of parameters to that needed for all
operations not involving the log-dirty bitmap, while introducing a new
wrapper for the log-dirty bitmap operations. This new function in turn
doesn't need an "mb" parameter, but has a 64-bit return type. (Using the
return value in favor of a pointer-type parameter is left as is, to
disturb callers as little as possible.)
While altering xc_shadow_control() anyway, also adjust the types of the
last two of the remaining parameters.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Christian Lindig <christian.lindig@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Acked-by: Ian Jackson <iwj@xenproject.org>
Don't assume tv_sec is a unsigned long, it is 64 bits on NetBSD 32 bits.
Use %jd and cast to (intmax_t) instead
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Acked-by: Ian Jackson <iwj@xenproject.org>
We unconditionally set HTT, so merely doubling the value read from
hardware isn't going to be correct if that value is zero.
Reported-by: Julien Grall <julien@xen.org>
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Tested-by: Julien Grall <julien@xen.org>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Xen may not support 32-bit PV guest for a number of reasons (lack of
CONFIG_PV32, explicit pv=no-32 command line argument, or implicitly
due to CET being enabled) and advertises this to the toolstack via the
absence of xen-3.0-x86_32p ABI.
Currently, when trying to boot a 32-bit PV guest, the ABI check is too
late and the build explodes in the following manner yielding an
unhelpful error message:
xc: error: panic: xg_dom_boot.c:121: xc_dom_boot_mem_init: can't allocate low memory for domain: Out of memory
libxl: error: libxl_dom.c:586:libxl__build_dom: xc_dom_boot_mem_init failed: Operation not supported
libxl: error: libxl_create.c:1573:domcreate_rebuild_done: Domain 1:cannot (re-)build domain: -3
libxl: error: libxl_domain.c:1182:libxl__destroy_domid: Domain 1:Non-existant domain
libxl: error: libxl_domain.c:1136:domain_destroy_callback: Domain 1:Unable to destroy guest
libxl: error: libxl_domain.c:1063:domain_destroy_cb: Domain 1:Destruction of domain failed
Move the ABI check earlier into xc_dom_parse_image() along with other
ELF-note feature checks. With this adjustment, it now looks like
this:
xc: error: panic: xg_dom_boot.c:88: xc_dom_compat_check: guest type xen-3.0-x86_32p not supported by xen kernel, sorry: Invalid kernel
libxl: error: libxl_dom.c:571:libxl__build_dom: xc_dom_parse_image failed
domainbuilder: detail: xc_dom_release: called
libxl: error: libxl_create.c:1573:domcreate_rebuild_done: Domain 11:cannot (re-)build domain: -3
libxl: error: libxl_domain.c:1182:libxl__destroy_domid: Domain 11:Non-existant domain
libxl: error: libxl_domain.c:1136:domain_destroy_callback: Domain 11:Unable to destroy guest
libxl: error: libxl_domain.c:1063:domain_destroy_cb: Domain 11:Destruction of domain failed
Suggested-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Jane Malalane <jane.malalane@citrix.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Ian Jackson <iwj@xenproject.org>
_hcbuf_buf1 has been there only for a pointer comparison to validate
type compatibility. The same can be achieved by not using typeof() on
the definition of what so far was _hcbuf_buf2, as the initializer has
to also be type-compatible. Drop _hcbuf_buf1 and the comaprison;
rename _hcbuf_buf2.
Since we're already using compiler extensions here, don't be shy and
also omit the middle operand of the involved ?: operator.
Bring line continuation character placement in line with that of
related macros.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Valid GFNs (having a representation in the dirty bitmap) need to be
strictly below p2m_size.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
minfo->p2m_size may have more than 31 significant bits. Change the
induction variable to unsigned long, and (largely for signed-ness
consistency) a helper variable to unsigned int. While there also avoid
open-coding min().
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
At the moment, do_control_lu() will set errno to 0 before calling
lu_arch() and then check errno. The expectation is nothing in lu_arch()
will change the value unless there is an error.
However, per errno(3), a function that succeeds is allowed to change
errno. In fact, syslog() will overwrite errno if the logs are rotated
at the time it is called.
To prevent any further issue, errno is now always set before
returning NULL.
Additionally, errno is only checked when returning NULL so the client
can see the error message if there is any.
Reported-by: Michael Kurth <mku@amazon.com>
Signed-off-by: Julien Grall <jgrall@amazon.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
lu_start() will only set errno when it returns NULL. For all the
other cases, the value is unknown.
This means that when lu_start() returns an error message, it may not
be propagated to the client.
The check that errno is a non-zero value is now dropped and instead
the value is returned when no error message is provided. This
relies on errno to always be set when ret == NULL.
Fixes: af216a99fb ("tools/xenstore: add the basic framework for doing the live update")
Signed-off-by: Julien Grall <jgrall@amazon.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
The maximum path length supported by Xenstored protocol is
XENSTORE_ABS_PATH_MAX (i.e 3072). This doesn't take into account the
NUL at the end of the path.
However, the code to dump the nodes will allocate a buffer
of XENSTORE_ABS_PATH. As a result it may not be possible to live-update
if there is a node name of XENSTORE_ABS_PATH.
Fix it by allocating a buffer of XENSTORE_ABS_PATH_MAX + 1 characters.
Take the opportunity to pass the max length of the buffer as a
parameter of dump_state_node_tree(). This will be clearer that the
check in the function is linked to the allocation in dump_state_nodes().
Signed-off-by: Julien Grall <jgrall@amazon.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Roger Pau Monné
Jane Malalane
Andrew Cooper
Juergen Gross
Ian Jackson
Julien Grall
Rahul Singh
Michal Orzel
Oleksandr Tyshchenko
Dmitry Isaykin
Oleksandr Andrushchenko
Anthony PERARD
Kevin Stefanov
Jan Beulich
Fabrice Fontaine