This datastructure is internal to the library.
Remove the reference from libxl_device_console. This could never have
been used from outside libxl and is only used internally to add the
primary PV console to a guest. Make an internal variant of
libxl_device_console_add which takes the build state as a parameter
instead.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson.citrix.com>
Committed-by: Ian Jackson <ian.jackson.citrix.com>
Language bindings would like to strongly type the domid as a separate
type so make it a defined type.
This patch only impacts the datatypes and autogenerated destructors, I
didn't think the churn of switching the uint32_t's through the code
was worth it.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson.citrix.com>
Committed-by: Ian Jackson <ian.jackson.citrix.com>
The IDL requires a specific value for each enumerate, this make it
much easier to avoid (or at least track) ABI changes since they must
now be explicit.
I believe I have used the same values as would have been chosen
previoulsy but have not confirmed.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson.citrix.com>
Committed-by: Ian Jackson <ian.jackson.citrix.com>
In other words the values for an enum type libxl_foo always take the
form LIBXL_FOO_VALUE.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson.citrix.com>
Committed-by: Ian Jackson <ian.jackson.citrix.com>
The FV/PV distinction is not particular to the device model, although
that remains the only user for now.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson.citrix.com>
Committed-by: Ian Jackson <ian.jackson.citrix.com>
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson.citrix.com>
Committed-by: Ian Jackson <ian.jackson.citrix.com>
c/s 22275: "tools: cleanup domain save switch_qemu_logdirty callback"
introduced a whole bunch of error code fixups. In the process, it also
ended up treating the success return code (0) from
switch_qemu_logdirty as an error and vice versa.
Signed-off-by: Shriram Rajagopalan <rshriram@cs.ubc.ca>
While running remus, when an error occurs during checkpointing
(e.g., timeouts on primary, failing to checkpoint network buffer
or disk or even communication failure) the domU is sometimes
left in suspended state on primary. Instead of blindly closing
the checkpoint file handle, attempt to resume the domain before
the close.
Signed-off-by: Shriram Rajagopalan <rshriram@cs.ubc.ca>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
This completely removes libxenstore from libxl users' view.
xl still needs libxenctrl directly due to the direct use of the
xentoollog functionality but it is not exposed to the indirect linkage
anymore.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
All external users pass 0 anyway so make the version of
libxl_domain_rename which takes a transaction internal and provide an
external facing function which does not expose a transaction.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
In particular if binary A uses libB and libB uses libC entirely
internally then A does not need to link against libC only libB.
However when linking binary A the linker does need to have visibility
of the libraries which libB links against (libC in this example). For
out of tree uses this is achieved without fuss due because the
libraries are installed in a standard path. However in the case of
in-tree users the linker needs a hint in the form of the -rpath-link
option. Therefore a new class of build variable, $(SHLIB_FOO), is
introduced which includes the linker options needed to link against a
library which uses libFOO. The intention is that $(LDLIBS_bar) will
include the $(SHLIB_foo)s which it uses where necessary rather
requiring that users are aware of this.
For the python extensions this change appears particularly large since
previously each of python bindings were linked against the union of
all possible libraries used by all bindings instead of just what they
individually needed.
This change removes a dependency on libdl.so from nearly everything
in the system, only libxenctrl actually uses it.
In the context of xl/libxl the intention of libxl is to remove any
need for a user of libxl to know about libxenstore or libxenctrl,
however in the current build it is xl which links against those
libraries rather than libxl (which only links against libc). After
this change libxl correctly depends on the libraries it uses and xl
does not depend on libraries which it is not support to be required to
know about. Note that xl does depend on libxenctrl.so since it uses
xtl_* directly.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
Currently we pile all the backend and format information pertaining to
disk option in a single enum. This check-in separates the two and
uses two enums, one for disk format and another for disk backend.
This helps clearly differentiate between disk format and backend
within the implementation and also helps cleanup the code in this area
in preparation for the impending parser revamping to be done post 4.1.
Along with separating format and backend, this check-in also removes
unwanted types and renames variables in the disk interface and fixes
the code affected by the interface changes.
In specific, here are the disk interface changes made - In
libxl_device_disk structure physpath was renamed to pdev_path,
virtpath was renamed to vdev, phystype was removed and replaced with
backend and format enums. Also previously a single enum
libxl_disk_phystype held the values for qcow, qcow2, vhd, aio, file,
phy, empty and that got refactored into two enums, libxl_disk_format
to hold unknown, qcow, qcow2, vhd, raw, empty and libxl_disk_backend
to hold unknown, phy, tap and qdisk.
Signed-off-by: Kamala Narasimhan <kamala.narasimhan@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
Allow setting a string field to None as a way to zero it out.
Implement setting/getting libx_file_references as strings.
Produce relevant Exceptions marshallers which remain unimplemented.
Signed-off-by: Gianni Tedesco <gianni.tedesco@citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
Added new function libxl_get_topologyinfo() to obtain this information from
hypervisor.
Signed-off-by: juergen.gross@ts.fujitsu.com
Signed-off-by: Ian Jackson <ian.jackson.citrix.com>
This makes the interface consistent with the changes made to the main
interface in 21483:779c0ef9682c.
Also fix some references to "struct xc_interface" which should have
been simply "xc_interface" in tools/xenpaging, and update QEMU_TAG to
pull in the corresponding qemu change.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Cpumap types in tools (libxc and libxl) are changed to be based on bytes like
in the interface to the hypervisor.
To make handling easier the size of used cpumaps is always based on the
number of physical cpus supported by the hypervisor. This eliminates the need
to keep track of the cpumap size in external interfaces.
In libxl a macro for cycling through a cpumap is added (libxl_for_each_cpu).
Interfaces changed:
libxl_set_vcpuaffinity()
libxl_cpumap_alloc()
xc_vcpu_setaffinity()
xc_vcpu_getaffinity()
xc_cpupool_freeinfo()
Signed-off-by: Juergen Gross <juergen.gross@ts.fujitsu.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
I have a suspicion these routines should be using libxc rather than
reimplementing all the hypercalls again, but I don't have the
enthusiasm to fix it.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Ian Jackson <ian.jackson.citrix.com>
Move the function into struct save_callbacks with the others and add
the void *closure to the callback arguments.
Add and propagate an error return code from the callback.
Use this in libxl to pass the save context to
libxl__domain_suspend_common_switch_qemu_logdirty allowing us to reuse
the parent's xenstore handle, gc context etc.
Also add an apparently missing libxl__free_all to
libxl__domain_suspend_common.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
To be able to support arbitrary numbers of physical cpus it was necessary to
include the size of cpumaps in the xc-interfaces for cpu pools.
These were:
definition of xc_cpupoolinfo_t
xc_cpupool_getinfo()
xc_cpupool_freeinfo()
xc_cpupool_getinfo() and xc_cpupool_freeinfo() are changed to allocate the
needed buffer and return it.
Signed-off-by: juergen.gross@ts.fujitsu.com
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Currently the wrappers for these hypercalls swallow partial success
and return failure to the caller.
In order to use these functions more widely instead of open-coding
uses of XENMEM_* and xc_memory_op add variants which return the actual
hypercall result.
Therefore add the following functions:
xc_domain_increase_reservation
xc_domain_decrease_reservation
xc_domain_populate_physmap
and implement the existing semantics using these new functions as
xc_domain_increase_reservation_exact
xc_domain_decrease_reservation_exact
xc_domain_populate_physmap_exact
replacing the existing xc_domain_memory_* functions.
Use these new functions to replace all open coded uses of
XENMEM_increase_reservation, XENMEM_decrease_reservation and
XENMEM_populate_physmap.
Also rename xc_domain_memory_*_pod_target to xc_domain_*_pod_target
for consistency.
Temporarily add a compatibility macro for
xc_domain_memory_populate_physmap to allow time for qemu to catch up.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
The double indirection has been unnecessary since 9867:ec61a8c25429,
there is no possibility of the buffer being reallocated now.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Introduce python binding for libxl. The binding is not yet complete but
serveral methods are implemented and tested. Those which are implemented
provide examples of the two or three basic patterns that most future
methods should follow.
Over 5,000 lines of boilerplate is automatically generated to wrap and
export all relevant libxl structure definitions. There are a few places
where such code cannot be fully auto-generated and special hooks are
declared and stubbed where, for example, conversion between
libxl_file_reference and a python file object is required.
Signed-off-by: Gianni Tedesco <gianni.tedesco@citrix.com>
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
It has been unused since 21732:eb34666befcc.
Removing the include of sys/ptrace.h and threaddb.h exposed a few
places which were using time(2) or gettimeofday(2) without including
time.h or sys/time.h respectively and were relying on an include.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
The flask library is small, and putting everything in libxenctrl make
relying on flask functionalities in libxl easier.
libflask is left for compatibility purpose, but should be considered
deprecated, and remove in the near future. all flask_ symbols are now
xc_flask_ symbols in libxenctrl.
Signed-off-by: Vincent Hanquez <vincent.hanquez@eu.citrix.com>
Writing a NUL terminator here isn't even necessary, since snprintf()
already guarantees proper termination.
Signed-off-by: Jan Beulich <jbeulich@novell.com>
This patch eliminate the global variables in libxenctrl (used for
logging and error reporting).
Instead the information which was in the global variables is now in a
new xc_interface* opaque structure, which xc_interface open returns
instead of the raw file descriptor; furthermore, logging is done via
xentoollog.
There are three new parameters to xc_interface_open to control the
logging, but existing callers can just pass "0" for all three to get
the old behaviour.
All libxc callers have been adjusted accordingly.
Also update QEMU_TAG for corresponding qemu change.
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
This allows multiple guests to be migrated or protected by Remus
simultaneously.
Signed-off-by: Shriram Rajagopalan <rshriram@cs.ubc.ca>
Acked-by: Brendan Cully <brendan@cs.ubc.ca>
'xm info' command now also gives the cpu topology & host numa
information. This will be later used to build guest numa support. The
patch basically changes physinfo sysctl, and adds topology_info &
numa_info sysctls, and also changes the python & libxc code
accordingly.
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
c/s 21040 and 21044 used to break cpu number limit (<=64).
However, they result in bug under ia32pae model:
1. things will go wrong for affinity, making all vcpus pin to a same
cpu with same time;
2. when 'xm vcpu-pin' vpu to cpu, xend will exit abnormally.
This patch is to fix the bugs described above.
Signed-off-by: Xu, Jiajun <jiajun.xu@intel.com>
Signed-off-by: Zhang, Jianwu <jianwu.zhang@inte.com>
Signed-off-by: Liu, Jinsong <jinsong.liu@intel.com>
Ian Campbell
Shriram Rajagopalan
Keir Fraser
Kamala Narasimhan
Gianni Tedesco
Juergen Gross
Ian Jackson
Keir Fraser