The current misc/pvh.markdown document refers to PVHv1, remove it to
avoid confusion with PVHv2 since the PVHv1 code has already been
removed.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Config.mk
MINIOS_UPSTREAM_REVISION } changed from tag to equivalent
QEMU_TRADITIONAL_REVISION } specific commit hash
QEMU_UPSTREAM_REVISION now tracking master again
README, xen/Makefile
Update version number
*/configure
Reran autoconf; only change is version number
tools/Rules.mk, xen/Kconfig.debug
Enable debug.
Reverts 229ff3125b "Use non-debug build for Xen 4.9".
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
iommu_inclusive_mapping is enabled by default (and has been for a long time).
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Also "correct" -> "incorrect" in the text.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
No quote is required when a string is provided as part of a spec string.
Reported-by: Doug Freed <dwfreed@mtu.edu>
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
The ARM GICv3 provides a new kind of interrupt called LPIs.
The pending bits and the configuration data (priority, enable bits) for
those LPIs are stored in tables in normal memory, which software has to
provide to the hardware.
Allocate the required memory, initialize it and hand it over to each
redistributor. The maximum number of LPIs to be used can be adjusted with
the command line option "max_lpi_bits", which defaults to 20 bits,
covering about one million LPIs.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Reviewed-by: Julien Grall <julien.grall@arm.com>
In cases where one is absolutely sure that there will be
less vCPUs than pCPUs, having to pay the cost, mostly in
terms of overhead, of an advanced scheduler may be not
desirable.
The simple scheduler implemented here could be a solution.
Here how it works:
- each vCPU is statically assigned to a pCPU;
- if there are pCPUs without any vCPU assigned, they
stay idle (as in, the run their idle vCPU);
- if there are vCPUs which are not assigned to any
pCPU (e.g., because there are more vCPUs than pCPUs)
they *don't* run, until they get assigned;
- if a vCPU assigned to a pCPU goes away, one of the
waiting to be assigned vCPU, if any, gets assigned
to the pCPU and can run there.
This scheduler, therefore, if used in configurations
where every vCPUs can be assigned to a pCPU, guarantees
low overhead, low latency, and consistent performance.
If used as default scheduler, at Xen boot, it is
recommended to limit the number of Dom0 vCPUs (e.g., with
'dom0_max_vcpus=x'). Otherwise, all the pCPUs will have
one Dom0's vCPU assigned, and there won't be room for
running efficiently (if at all) any guest.
Target use cases are embedded and HPC, but it may well
be interesting also in circumnstances.
Kconfig and documentation are update accordingly.
While there, also document the availability of sched=rtds
as boot parameter, which apparently had been forgotten.
Signed-off-by: Dario Faggioli <dario.faggioli@citrix.com>
Reviewed-by: George Dunlap <george.dunlap@citrix.com>
Currently setting altp2mhvm=1 in the domain configuration allows access to the
altp2m interface for both in-guest and external privileged tools. This poses
a problem for use-cases where only external access should be allowed, requiring
the user to compile Xen with XSM enabled to be able to appropriately restrict
access.
In this patch we deprecate the altp2mhvm domain configuration option and
introduce the altp2m option, which allows specifying if by default the altp2m
interface should be external-only or limited. The information is stored in
HVM_PARAM_ALTP2M which we now define with specific XEN_ALTP2M_* modes.
If external mode is selected, the XSM check is shifted to use XSM_DM_PRIV
type check, thus restricting access to the interface by the guest itself. Note
that we keep the default XSM policy untouched. Users of XSM who wish to enforce
external mode for altp2m can do so by adjusting their XSM policy directly,
as this domain config option does not override an active XSM policy.
Also, as part of this patch we adjust the hvmop handler to require
HVM_PARAM_ALTP2M to be of a type other then disabled for all ops. This has been
previously only required for get/set altp2m domain state, all other options
were gated on altp2m_enabled. Since altp2m_enabled only gets set during set
altp2m domain state, this change introduces no new requirements to the other
ops but makes it more clear that it is required for all ops.
Signed-off-by: Tamas K Lengyel <tamas.lengyel@zentific.com>
Signed-off-by: Sergej Proskurin <proskurin@sec.in.tum.de>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Acked-by: Jan Beulich <jbeulich@suse.com>
The sending side shouldn't send any data records which end up having
zero-length content, but the receiving side will need to tolerate such
records for compatibility purposes.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
[ wei: fix typos etc ]
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Reviewed-by: Wei Liu <wei.liu2@citrix.com>
In order to distinguish guest-generated SErrors from hypervisor-generated
SErrors we have to place SError checking code in every EL1 <-> EL2 paths.
That will cause overhead on entries and exits due to dsb/isb.
However, not all platforms want to categorize SErrors. For example, a host
that is running with trusted guests. The administrator can confirm that
all guests that are running on the host will not trigger such SErrors. In
this use-case, we should provide some options to administrators to avoid
categorizing SErrors and then reduce the overhead of dsb/isb.
We provided the following 3 options to administrators to determine how
the hypervisors handle SErrors:
* `diverse`:
The hypervisor will distinguish guest SErrors from hypervisor SErrors.
The guest generated SErrors will be forwarded to guests, the hypervisor
generated SErrors will cause the whole system to crash.
It requires:
1. dsb/isb on all EL1 -> EL2 trap entries to categorize SErrors
correctly.
2. dsb/isb on EL2 -> EL1 return paths to prevent slipping hypervisor
SErrors to guests.
3. dsb/isb in context switch to isolate SErrors between 2 vCPUs.
* `forward`:
The hypervisor will not distinguish guest SErrors from hypervisor
SErrors. All SErrors will be forwarded to guests, except the SErrors
generated when the idle vCPU is running. The idle domain doesn't have
the ability to handle SErrors, so we have to crash the whole system when
we get SErros with the idle vCPU. This option will avoid most overhead
of the dsb/isb, except the dsb/isb in context switch which is used to
isolate the SErrors between 2 vCPUs.
* `panic`:
The hypervisor will not distinguish guest SErrors from hypervisor SErrors.
All SErrors will crash the whole system. This option will avoid all
overhead of the dsb/isb pairs.
Signed-off-by: Wei Chen <Wei.Chen@arm.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Having an off by default option allowing guests to join
_any_ shared pool is not very secure.
Lets eliminate tmem_shared_auth bootup option (which
was disabled by default) and have the code force this by default.
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Commit 4c8153d9 "add ACPI device for Windows laptop/slate mode switch"
added code to provide an 'laptop/slate mode' ACPI device to guests.
When present this device is used by Microsoft Windows to bind a HID
driver which controls whether the Windows desktop appearance is optimized
for laptop/desktop or slate/tablet PCs. The mechanism for switching
between modes is to open a handle to this driver and write a byte of
arbitrary data.
This patch documents xenstore keys such that a PV agent running in a
Windows guest can advertise the capability to, and receive instruction
from, a toolstack to cause such a mode switch.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Commit 4c8153d9 "add ACPI device for Windows laptop/slate mode switch"
added code that makes use of a new xenstore guest platform key called
'acpi_laptop_slate'. This path needs to be added to the documentation.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
A number of changes have been made to how we determine whether TSC
is emulated (e.g. commit 4fc380ac00 ("x86/time: don't use virtual TSC
if host and guest frequencies are equal")).
Update the man page to reflect those changes
Suggested-by: Olaf Hering <olaf@aepfle.de>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Add functions to libxl to setup a Xen 9pfs frontend/backend connection.
Add support to xl to parse a 9pfs option in the VM config file, in the
following format:
p9=["tag=share_dir,security_model=none,path=/root/share_dir"]
where tag identifies the 9pfs share and it is required to mount it on
the guest side, path is the path of the filesystem to share and the only
security_model supported is "none" which means that files are stored
using the same credentials as they are created on the guest (no user
ownership squash or remap).
Signed-off-by: Stefano Stabellini <stefano@aporeto.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Classic PV shadow paging Dom0 has been broken for years, and can't
possibly be configured after 4045953.
PVH shadow paging Dom0 should still be possible.
Change the code and documentation to clarify that.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper@citrix.com>
Recent discussions on xen-devel have highlighted that to properly
support displacing emulated NVMe disks with PV equivalents will need
updates to PV frontends. Therefore it is important that, if an emulated
NVMe disk is exposed to a guest with an existing PV storage frontend,
that frontend does not inadvertently cause unplug of that emulated
disk when unplugging IDE or SCSI disks.
This patch defines a new bit in the mask used to instruct QEMU to unplug
emulated devices which will instruct QEMU to unplug NVMe disks and limits
the semantics of the existing 'all' disk-unplug bit to only IDE and/or SCSI
disks.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Reviewed-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: George Dunlap <george.dunlap@citrix.com>
Section 2.4.4 of the Hypervisor Top Level Functional Specification states
that enabling bit 10 in EDX of CPUID leaf 3 advertises to Windows a set
of MSRs into which it can write crash information.
This patch advertises that bit and implements the MSRs such that Xen can
log the information if a Windows guest crashes.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Wei Liu <wei.liu2@citrix.com>
The current threshold before the guest issues the hypercall is, and always
has been, hard-coded to 2047. It is not clear where this number came
from so, to at least allow for ease of experimentation, this patch makes
the threshold tunable via the Xen command line.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
The Hypervisor Top Level Functional Specification v5.0a states in section
2.5:
"The hypervisor version information is encoded in leaf 0x40000002. Two
version numbers are provided: the main version and the service version.
The main version includes a major and minor version number and a build
number. These correspond to Microsoft Windows release numbers."
It also goes on to advise clients (i.e. guest versions of Windows) to use
the following algorithm to determine compatibility with the hypervisor
enlightenments:
if <your-main-version> greater than <hypervisor-main-version>
{
your version is compatible
}
else if <your-main-version> equal to <hypervisor-main-version> and
<your-service-version> greater than or equal to <hypervisor-service-version>
{
your version is compatible
}
else
{
your version is NOT compatible
}
So, clearly putting Xen hypervisor version information in that leaf is
spurious, but we probably get away with it because Xen's major version
is lower than the major version of Windows in which Hyper-V first
appeared (Server 2008).
This patch changes the leaf to use the kernel major and minor
versions, and build number from Windows Server 2008 (64-bit) by default.
These default values can be overriden from the Xen command line using new
'viridian-version' parameter.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Introduce new Xen command line parameter called "vwfi", which stands for
virtual wfi. The default is "trap": Xen traps guest wfi and wfe
instructions. In the case of wfi, Xen calls vcpu_block on the guest
vcpu; in the case of guest wfe, Xen calls vcpu_yield on the guest vcpu.
The behavior can be changed by setting vwfi to "native", in that case
Xen doesn't trap neither wfi nor wfe, running them in guest context.
The result is strong reduction in irq latency (from 5000ns to 2000ns,
measured using https://github.com/edgarigl/tbm, the physical timer, and
1 pcpu dedicated to 1 vcpu). The downside is that the scheduler thinks
that the guest is busy when actually is sleeping, leading to suboptimal
scheduling decisions.
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
Reviewed-by: Dario Faggioli <dario.faggioli@citrix.com>
Reviewed-by: Julien Grall <julien.grall@arm.com>
PV Calls is a paravirtualized protocol that allows the implementation of
a set of POSIX functions in a different domain. The PV Calls frontend
sends POSIX function calls to the backend, which implements them and
returns a value to the frontend and acts on the function call.
This version of the document covers networking function calls, such as
connect, accept, bind, release, listen, poll, recvmsg and sendmsg; but
the protocol is meant to be easily extended to cover different sets of
calls. Unimplemented commands return ENOTSUP.
Signed-off-by: Stefano Stabellini <stefano@aporeto.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
9pfs is a network filesystem protocol developed for Plan 9. 9pfs is very
simple and describes a series of commands and responses. It is
completely independent from the communication channels, in fact many
clients and servers support multiple channels, usually called
"transports". For example the Linux client supports tcp and unix
sockets, fds, virtio and rdma.
This design document outlines the transport protocol for
9pfs payload.
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Stefano Stabellini <stefano@aporeto.com>
As some users have suggested, elaborate the usage of RMRR specification
on the command line, and provide a usage example.
Also, always treat the specified page numbers as hexadecimal values.
Signed-off-by: Venu Busireddy <venu.busireddy@oracle.com>
Acked-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Kevin Tian <kevin.tian@intel.com>
The default dom0_mem is 128M which is not sufficient to boot a Ubuntu
based Dom0. It is not clear what a better default value could be.
Instead, loudly warn the user when dom0_mem is unspecified and wait 3
secs. Then use 512M.
Update the docs to specify that dom0_mem is required on ARM. (The
current xen-command-line document does not actually reflect the current
behavior of dom0_mem on ARM correctly.)
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
Reviewed-by: Julien Grall <julien.grall@arm.com>
Reviewed-by: Wei Liu <wei.liu2@citrix.com>
There have been reports that Fedora 25 uses /run instead of /var/run.
Add a --with-rundir option ito configure to be able to specify that
directory. Default is still /var/run.
A re-run of autogen.sh is required.
Signed-off-by: Juergen Gross <jgross@suse.com>
[ wei: run autogen.sh ]
Acked-by: Wei Liu <wei.liu2@citrix.com>
PVHv2 guests, unlike HVM guests, won't have the option to route interrupts
from physical or emulated devices over event channels using PIRQs. This
applies to both DomU and Dom0 PVHv2 guests.
Introduce a new XEN_X86_EMU_USE_PIRQ to notify Xen whether a HVM guest can
route physical interrupts (even from emulated devices) over event channels,
and is thus allowed to use some of the PHYSDEV ops.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Split the Dom0 builder into two different functions, one for PV (and classic
PVH), and another one for PVHv2. Introduce a new command line parameter called
'dom0' that can be used to request the creation of a PVHv2 Dom0 by setting the
'hvm' sub-option. A panic has also been added if a user tries to use dom0=hvm
until all the code is in place, then the panic will be removed.
While there mark the dom0_shadow option that was used by PV Dom0 as deprecated,
it was lacking documentation and was not functional. Point users towards
dom0=shadow instead.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
The information given in the xl man page for the mem-max command is
rather brief. Expand it in order to let the reader understand what it
is really doing.
As the related libxl function libxl_domain_setmaxmem() isn't much
clearer add a comment to it explaining the desired semantics.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
The documentation states that a value of '1' will cause unplug of
emulated IDE disks. This is not quite correct, as QEMU will also unplug
emulated SCSI disks at the same time.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Reviewed-by: Wei Liu <wei.liu2@citrix.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
...as a set of hypercalls to be used by a device model.
As stated in the new docs/designs/dm_op.markdown:
"The aim of DMOP is to prevent a compromised device model from
compromising domains other then the one it is associated with. (And is
therefore likely already compromised)."
See that file for further information.
This patch simply adds the boilerplate for the hypercall.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Suggested-by: Ian Jackson <ian.jackson@citrix.com>
Suggested-by: Jennifer Herbert <jennifer.herbert@citrix.com>
Acked-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
On some platforms firmware fails to specify RMRR regions in ACPI tables and
thus those regions will not be mapped in dom0 or guests and may cause IO
Page Faults and prevent dom0 from booting if "iommu=dom0-strict" option is
specified on the Xen command line.
New Xen command line option rmrr allows to specify such devices and
memory regions. These regions are added to the list of RMRR defined in ACPI
if the device is present in system. As a result, additional RMRRs will be
mapped 1:1 in dom0 with correct permissions.
The above mentioned problems were discovered during the PVH work with
ThinkCentre M and Dell 5600T. No official documentation was found so far
in regards to what devices and why cause this. Experiments show that
ThinkCentre M USB devices with enabled debug port generate DMA read
transactions to the regions of memory marked reserved in host e820 map.
For Dell 5600T the device and faulting addresses are not found yet.
For detailed history of the discussion please check following threads:
http://lists.Xen.org/archives/html/xen-devel/2015-02/msg01724.htmlhttp://lists.Xen.org/archives/html/xen-devel/2015-01/msg02513.html
Format for rmrr Xen command line option:
rmrr=start<-end>=[s1]bdf1[,[s1]bdf2[,...]];start<-end>=[s2]bdf1[,[s2]bdf2[,...]]
For example, for Lenovo ThinkCentre M, use:
rmrr=0xd5d45=0:0:1d.0;0xd5d46=0:0:1a.0
If grub2 used and multiple ranges are specified, ';' should be
quoted/escaped, refer to grub2 manual for more information.
Signed-off-by: Elena Ufimtseva <elena.ufimtseva@oracle.com>
Signed-off-by: Venu Busireddy <venu.busireddy@oracle.com>
Acked-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
tscmode.txt is referenced in xl.cfg(5). Convert it into a pod
formatted man page.
Signed-off-by: Cédric Bosdonnat <cbosdonnat@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
pci-device-reservations is references in xl.cfg(5), convert it as a man
page in pod format. The name is now prefixed with 'xen-' to avoid
possible name conflicts.
Signed-off-by: Cédric Bosdonnat <cbosdonnat@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
channel.txt is referenced in xl.cfg(5). Move it to man pages, section 7.
Signed-off-by: Cédric Bosdonnat <cbosdonnat@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
vtpmmgr.txt is referenced in a man page, convert it to a man page.
The man page is named xen-vtpmmgr to avoid any conflict with other
potential vtpm docs.
Signed-off-by: Cédric Bosdonnat <cbosdonnat@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Roger Pau Monné
Swapnil Paratey
Ian Jackson
Wei Liu
Andre Przywara
Dario Faggioli
Tamas K Lengyel
Andrew Cooper
Wei Chen
Konrad Rzeszutek Wilk
Paul Durrant
Boris Ostrovsky
Stefano Stabellini
Zhang Chen
Stefano Stabellini
Venu Busireddy
Juergen Gross
Olaf Hering
Fatih Acar
Elena Ufimtseva
Cédric Bosdonnat