When ipxe.bin is missing, make uninstall will fail due to
wrong switch (-r) passed to rm command. Replace it with -f.
Signed-off-by: Hubert Jasudowicz <hubert.jasudowicz@cert.pl>
Reviewed-by: Bertrand Marquis <bertrand.marquis@arm.com>
Acked-by: Wei Liu <wl@xen.org>
So a user can decide whether to compile a PV shim as part of the tools
build. Note that the default behavior is preserved, which is to build
a PV shim when the target or host (if target is unset) architecture is
64bit x86.
Requested-by: Olaf Hering <olaf@aepfle.de>
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
[ wei: run autogen.s ]
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
The build system of seabios always includes the current time and the
hostname into the resulting binary. To avoid that, it is required to
have a file '.version' in the toplevel directory of seabios-dir-remote.
And it is required to pass EXTRAVERSION= to make because its toplevel
Makefile does not take EXTRAVERSION from environment.
Adjust the code to create a '.version' file with fixed content.
Adjust the code to pass EXTRAVERSION down to make.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Do not embed IPXE into Rombios anymore. Instead, it is loaded by the
toolstack from a file as a separate module.
Ability to let user specify an IPXE blob will come later.
No user visible change.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
SeaBIOS requires gcc and GNU ld in order to build, so allow setting
SEABIOSCC and SEABIOSLD by the caller when building in order to pass
the path to the compiler and linker that should be used when building
SeaBIOS.
Note that the LD32BIT-y variable was used by FreeBSD builds and is no
longer needed due to the ability to select the LD to use for SeaBIOS
builds, so remove it.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
There's no need to have shim specific targets, so just use the regular
xen makefile targets in order to build the shim binary.
When the shim is build as part of the firmware directory install the
stripped Xen binary to the firmware directory and place a binary with
symbols in the debug directory.
The objcopy step of the shim build is also removed in this patch:
since the shim is booted in PVH mode there's no need for the resulting
binary to be in elf32 format. Xen can load PVH kernels with either a
32 or 64bit elf header.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Link a minimum set of files to build the shim. The linkfarm rune can
handle creation and deletion of files. Introduce build-shim and
install-shim targets in xen/Makefile.
We can do better by properly generate the dependency from the list of
files but that's an improvement for later.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Running "make uninstall" does not remove all installed files, a
situation which might cause link related issues if xen is re-installed
in a different location.
In order to make uninstall correctly remove the files it is best
the process should be done recursively by mirroring each "install"
target with an "uninstall" who removes the installed files.
An exception to this rule is uninstalling the files produced by
"qemu-xen-dir-remote" and "qemu-xen-traditional-dir", which are external
to the project. These projects do not implement an "uninstall" target so
the files have to be removed manually.
Signed-off-by: Petre Pircalabu <ppircalabu@bitdefender.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
The use of seabios defconfig kills boot performance of Windows guests
because the default is for the int13 handler to use PIO when accessing
the emulated IDE device.
By instead using a canned configuration with the ATA settings overridden
to enable DMA access (and also wider PIO) boot performance is markedly
improved without the need to use a different (and possibly not supported)
device model.
This patch adds the canned configuration into tools/firmware and modifies
the Makefile rule to copy it into place.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
... to compile SeaBIOS and OVMF. Only depend on CONFIG_*.
If --with-system-* configure option is used, then set *_CONFIG=n to not
compile SEABIOS and OVMF.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
subtree-force-update will update all subtrees according to the current TAG specified
in Config.mk.
Signed-off-by: George Dunlap <george.dunlap@eu.citrix.com>
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Make the targets depend on the "-find" targets, so that if the
subtrees are cloned if they haven't been cloned already.
Signed-off-by: George Dunlap <george.dunlap@eu.citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
We have four different external trees, and four different naming
conventions for specifying the URL, where they live, and what revision
to check out.
Normalize config options on the following bases:
- QEMU_UPSTREAM
- QEMU_TRADITIONAL
- SEABIOS_UPSTREAM
- OVMF_UPSTREAM
The following suffixes for all trees:
- _URL : A remote repository to clone from
- _REVISION : The revision to check out
And the following suffixes for the qemu trees:
- _INTREE : The location of an inlined tree (for tarball releases)
- _LOC : Where to actually look (either a directory or a URL)
The following parameters are still supported for backwards
compatibility:
- CONFIG_QEMU (=> QEMU_TRADITIONAL_LOC)
- QEMU_REMOTE (=> QEMU_TRADITIONAL_URL)
- QEMU_TAG (=> QEMU_TRADITIONAL_REVISION)
- SEABIOS_UPSTREAM_TAG (=> SEABIOS_UPSTREAM_REVISION)
Signed-off-by: George Dunlap <george.dunlap@eu.citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Debian Jessie at least contains an ovmf package that includes
/usr/share/ovmf/OVMF.fd. It's also possible that user may want to supply
his/her own ovmf binary.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
for consistency with other foo-dir e.g. qemu, seabios.
Remove obsolete ovmf-find target.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
If this option is given don't bother building seabios ourselves.
Likely to be handy for distros who have an existing seabios
package which they want to reuse.
Signed-off-by: Fabio Fantoni <fabio.fantoni@m2r.biz>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Since seabios-dir is cloned during build we need to check that it exists before
recursing into it for clean, following the pattern used for qemu-*-dir etc.
Also remove usage of "buildmakevars2shellvars" except when used to poopulate
the environment for qemu-xen-traditional's xen-setup script, which is the only
user.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
This patch introduces configuration options allowing to built either a
rombios only or a seabios only hvmloader.
Building option ROMs like vgabios or etherboot is only enabled for a
rombios hvmloader, since SeaBIOS takes care or extracting option ROMs
itself from the PCI devices (these option ROMs are provided by the
device model and do not need to be built in hvmloader).
The Makefile in tools/firmware/ now only checks for bcc if rombios is
enabled.
These two configuration options are left on by default to remain
compatible.
Signed-off-by: Julian Pidancet <julian.pidancet@gmail.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
These have broken the build and it seems to be difficult to fix. So
we will revert the whole lot for now, and await corrected patch(es).
Revert "fix the build when CONFIG_QEMU is specified by the user"
Revert "tools: fix permissions of git-checkout.sh"
Revert "scripts/git-checkout.sh: Is not bash specific. Invoke with /bin/sh."
Revert "Clone and build Seabios by default"
Revert "Clone and build upstream Qemu by default"
Revert "Rename ioemu-dir as qemu-xen-traditional-dir"
Revert "Move the ioemu-dir-find shell script to an external file"
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Otherwise make can search the path relative to certain standard paths
such as /usr/include (e.g., the line '-include $(XEN_ROOT)/.config' in
Config.mk suffers from this).
Signed-off-by: Keir Fraser <keir@xen.org>
Also build gpxe without -Werror and require it always to be built (do
not include a pre-built binary in our source repo).
Portions of this patch are from Gianni Tedesco <gianni.tedesco@citrix.com>
Signed-off-by: Keir Fraser <keir.fraser@citrix.com>
This has finally bugged me enough to do something about it:
make prints `***' when it stops due to an error. With make -j, and/or
with automated build systems, this error marker can be in the middle
of a large logfile. It is useful to be able to search for it.
Therefore change occurrences of `*' to `=' for information and warning
messages. `***' is reserved for cases where the build stops.
A corresponding change is being applied to qemu-xen-unstable.
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Device model is not present in external qemu repository, and
functionality was never exposed through the toolstack.
Signed-off-by: Keir Fraser <keir.fraser@citrix.com>
tools/firmware/etherboot by default (the dependency of eb_roms.h on
Config does not seem to always prevent the build from going ahead, for
some reason).
Signed-off-by: Keir Fraser <keir.fraser@citrix.com>
We now include the source for Etherboot (5.4.2, obtained from git)
rather than a pre-built ROM. This gives better traceability and GPL
licence compliance. See tools/firmware/etherboot/README for details.
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
This patch adds extboot to Xen. It should be pretty harmless as the
moment because it's never enabled. extboot allows arbitrary block
devices to be used to boot guests including SCSI and PV disks. I've
tested it with both Windows and Linux guests in QEMU.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
compiled with gcc and linked into the hvmloader as a byte-array.
Hvmloader allocates memory (rounded up to next 64kb) from the e820
table
below 4GB, copies and relocates the 32bit code in the allocated area
and
copies a jumptable (located in a section '.biosjumptable') pointing to
the 'exported' functions into the Bochs BIOS's memory area to link the
two code sections. The memory area has been reserved and can be
identified with the signature '___JMPT'.
In the Bochs BIOS only stub functions are provided. These load the
index
of a particular function in the jump table, switch to protected mode
and
call the function in the high memory area. The stack is prepared such
that functions compiled by gcc can just pick the parameters from the
stack as usual - this means that the 16bit real-mode return address is
taken off the stack. The stub functions should have the same signature
as those in 32bit space. For ABI compatibility reasons parameters
inside
the Bochs BIOS stubs should all be 32bit wide.
This patch includes a test function that calls three gcc-compiled
functions in the high memory area and displays their success status.
Simple tests are done doing multiplication and addition of 32-bit
numbers and reading and modification of a static variable. These
functions test the interface and the relocation code. The test code is
removed in patch part 3.
Signed-off-by: Stefan Berger <stefanb@us.ibm.com>
directory pending tighter integration of table generation
into hvmloader. This patch also includes the TPM TIS SSDT
generator from Stefan Berger at IBM.
Signed-off-by: Keir Fraser <keir@xensource.com>
Hubert Jasudowicz
Roger Pau Monne
Wei Liu
Olaf Hering
Andrew Cooper
Petre Pircalabu
Paul Durrant
Anthony PERARD
George Dunlap
Ian Campbell
Fabio Fantoni
Christoph Egger
Attilio Rao
Julian Pidancet
Ian Jackson
Keir Fraser
Keir Fraser
Keir Fraser
kfraser@localhost.localdomain
kaf24@localhost.localdomain