gcc re-orders top level blocks by default when optimizing. This
re-ordering results in all our .type directives to get emitted to the
assembly file first, followed by gcc's. The assembler warns about
attempts to change the type of a symbol when it was already set (and
when there's no intervening setting to "notype").
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
x86emul_is_mem_{access,write}() (and their interaction with
x86_decode()) have become sufficiently complex that we should have a way
to test this logic. Start by covering legacy encoded GPR insns, with the
exception of a few the main emulator doesn't support yet (left as
comments in the respective tables, or about to be added by subsequent
patches). This has already helped spot a few flaws in said logic,
addressed by (revised) earlier patches.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
The {evex} pseudo prefix gets rejected by gas for insns not allowing
EVEX encoding. Except there's a gas bug due to which its check gets
bypassed for insns without operands. Let's not rely on that bug to
remain there.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
We're deliberately bringing XEN_COMPILE_ARCH and XEN_TARGET_ARCH out of
sync in this case, and hence HOSTCC won't get set from CC. Therefore
without this addition HOSTCC would not match a possible make command
line override of CC, but default to "gcc", likely causing the build to
fail for test_x86_emulator.c on systems with too old a gcc.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
The run* targets can be used to test whatever the tool chain is capable
of building, as long as at least the main harness source file builds.
Don't probe the tools chain, in particular to avoid issuing the warning,
in this case. While looking into this I also noticed the wording of the
respective comment isn't quite right, which therefore gets altered at
the same time.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Commit fd35f32b4b ("tools/x86emul: Use struct cpuid_policy in the
userspace test harnesses") didn't account for the dependencies of
cpuid-autogen.h to potentially change between incremental builds. In
particular the harness has a "run" goal which is supposed to be usable
independently of the rest of the tools sub-tree building, and both the
harness and the fuzzer code are also supposed to be buildable
independently. Therefore a re-build of the generated header needs to be
triggered first, which is achieved by introducing a new top-level target
pattern (for just the "run" part for now).
Further cpuid.o did not have any dependencies added for it.
Finally, while at it, add a "run" target to the cpu-policy test harness.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
This causes objdump to disassemble them, rather than rendering them as
straight hex data.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Also use this for AVX512_VBMI2 VPSH{L,R}D{,V}{D,Q,W} testing (only the
quad word right shifts get actually used; the assumption is that their
"left" counterparts as well as the double word and word forms then work
as well).
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Andrew Cooper <andrew.cooper3@citirx.com>
Also use this for AVX512VL VPRO{L,R}{,V}D as well as some further shifts
testing.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
As to the feature dependency adjustment, while strictly speaking SSE is
a sufficient prereq (to have XMM registers), vectors of bytes and qwords
have got introduced only with SSE2. gcc, for example, uses a similar
connection in its respective intrinsics header.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Also add testing of ones support for which was added before. Sadly gcc's
command line option naming is not in line with Intel's naming of the
feature, which makes it necessary to mis-name things in the test harness.
Since the only new insn here and in particular its memory access pattern
follows the usual scheme, I didn't think it was necessary to add a
contrived test specifically for it, beyond the Disp8 scaling one.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
In order to verify that in particular the index register decoding works
correctly in the S/G emulation paths, add dedicated (64-bit only) cases
disallowing the compiler to use the lower registers. Other than in the
generic SIMD case, where occasional uses of %xmm or %ymm registers in
generated code cause various internal compiler errors when disallowing
use of all of the lower 16 registers (apparently due to insn templates
trying to use AVX2 encodings), doing so here in the AVX512F case looks
to be fine.
While the main goal here is the AVX512F case, add an AVX2 variant as
well.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
GCC 4.4 (as included in CentOS 6) is too old to handle designated initialisers
in anonymous unions. As this is just a developer tool, skip the test in this
case, rather than sacraficing the legibility/expresibility of the test cases.
This fixes the Gitlab CI tests.
While adding this logic to cpu-polcy, adjust the equivelent logic from
x86_emulator on which this was based. Printing:
Test harness not built, use newer compiler than "gcc"
isn't helpful for anyone unexpectedly encountering the error.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Wei Liu <wei.liu2@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Also include the only other AVX512ER insn pair, VEXP2P{D,S}.
Note that despite the replacement of the SHA insns' table slots there's
no need to special case their decoding: Their insn-specific code already
sets op_bytes (as was required due to simd_other), and TwoOp is of no
relevance for legacy encoded SIMD insns.
The raising of #UD when EVEX.L'L is 3 for AVX512ER scalar insns is done
to be on the safe side. The SDM does not clarify behavior there, and
it's even more ambiguous here (without AVX512VL in the picture).
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Test the 128- and 256-bit variants of the insns which have been
implemented already.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
A top level "make build", as used e.g. by osstest, wants to build all
"all" targets in enabled tools subdirectories, which by default also
includes the emulator test harness. The use of, in particular, {evex}
insn pseudo-prefixes in, again in particular, test_x86_emulator.c causes
this build to fail though when the assembler is not new enough. Take
another big hammer and suppress the default harness build altogether
also when this and other pseudo-prefixes are not supported by the
specified (or defaulted to) assembler.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
When preparing what is now 52c37f7ab9 ("x86emul: also allow running the
32-bit harness on a 64-bit distro") I first wrongly used XEN_TARGET_ARCH
instead of XEN_COMPILE_ARCH. When realizing the mistake I forgot to also
switch around the use in the expression controlling the rule
dependencies, causing "make distclean" to fail on 64-bit distros.
Reported-by: Paul Durrant <Paul.Durrant@citrix.com>
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Tested-by: Paul Durrant <Paul.Durrant@citrix.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
A top level "make build", as used e.g. by osstest, wants to build all
"all" targets in enabled tools subdirectories, which by default also
includes the emulator test harness. The use of, in particular, AVX512
insns in, again in particular, test_x86_emulator.c causes this build to
fail though when the compiler is not new enough. Take a big hammer and
suppress the default harness build altogether when any of the extensions
used is not supported by the specified (or defaulted to) compiler.
Leave the "run" target alone though: While some of the test code blobs
may fail to build with older compilers, as long as the main executable
can be built some limited testing can still be done.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
In order to be able to verify the 32-bit variant builds and runs,
introduce a respective target (and the necessary other adjustments).
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Besides the already existing tests (which are going to be extended once
respective ISA extension support is complete), let's also ensure for
every individual insn that their Disp8 scaling (and memory access width)
are correct.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
This will shortly be required to pass into the emulator itself.
Simplify the shared cpu_has_* helpers by reading the correct bit out of the
CPUID policy itself.
No (intended) change in behaviour.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
These are all VEX encoded, so the EVEX decoding logic continues to
remain unused at this point.
The new testcase is deliberately coded in assembly, as a C one would
have become almost unreadable due to the overwhelming amount of
__builtin_...() that would need to be used. After all the compiler has
no underlying type (yet) that could be operated on without builtins,
other than the vector types used for "normal" SIMD insns.
Note that outside of 64-bit mode and despite the SDM not currently
saying so, VEX.W is ignored for the KMOV{D,Q} encodings to/from GPRs,
just like e.g. for the similar VMOV{D,Q}.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
The generated header files are what needs to spell out dependencies on
other (real) headers in the main Makefile here, not the intermediate
(helper) .o files produced through testcase.mk.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Fixing top-level "make uninstall":
tools/tests/x86_emulator is missing an uninstall target, which causes
failure. Trivial to add one since it installs nothing, so do that.
Linux hotplug uninstall returns success but doesn't actually remove what
it installed. The Makefile variables are obfuscating incorrect logic, so
strip them out and match existing code for xen-watchdog which does work.
Signed-off-by: Christopher Clark <christopher.clark6@baesystems.com>
Reviewed-by: Doug Goldstein <cardoe@cardoe.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
In the x86 test harness and the fuzzer, and instead create a link in
the tools/include directory that can be used by all the tools.
No functional change.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
This allows the section contents to be disassembled without going
through any extra hoops, simplifying the analysis of problems in test
and/or emulation code.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Yes, recent AMD CPUs don't support them anymore, but I think we should
nevertheless cope.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Currently with the native tool chain on Debian Jessie ./test_x86_emulator
yields:
Testing AVX2 256bit single native execution...okay
Testing AVX2 256bit single 64-bit code sequence...[line 933] failed!
The bug is that libc's memcpy() in read() uses %xmm8 (specifically, in
__memcpy_sse2_unaligned()), which corrupts %ymm8 behind the back of the AVX2
test code.
Introduce wrappers (and machinery to forward calls to those wrappers)
saving/restoring FPU state around certain library calls.
Reported-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-and-tested-by: Andrew Cooper <andrew.cooper3@citrix.com>
I.e. those not being equivalents of SSEn ones, but with the exception
of the various gather operations.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Specifically in the context of putting together subsequent patches I've
noticed that together with the touch() macro using -Os further
increases the chances of the compiler using memory operands for the
instructions we actually care to test.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: George Dunlap <george.dunlap@citrix.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
When generating coverage output, by default gcov generates output
filenames based only on the coverage file and the "leaf" source file,
not the full path. As a result, it uses the same name for
x86_emulate.c and x86_emulate/x86_emulate.c, generally overwriting the
second (which we actually are about) with the first (which is just a
wrapper).
Rename the user-space wrapper helpers to x86-emulate.[ch], so
that it generates separate files.
There is actually an option to gcov, `--preserve-paths`, which will
cause the full path name to be included in the filename, properly
distinguishing between the two. However, given that the user-space
wrapper doesn't actually do any emulation (and the poor state of gcov
documentation making it difficult to find the option in the first
place), it seems to make more sense to rename the file anyway.
Signed-off-by: George Dunlap <george.dunlap@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
I.e. those not being equivalents of SSEn ones.
There's one necessary change to generic code: Faulting behavior of
VMASKMOVP{S,D} requires us to do partial reads/writes.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
PIE may (and commonly will) result in the binary being loaded above
the 4Gb boundary, which can't work with at least the VZEROUPPER compat
mode test.
Add -fno-PIE and -no-pie when appropriate so that gcc won't generate a
PIE executable.
Reported-by: Wei Liu <wei.liu2@citrix.com>
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
In anticipation of further flavors (AVX, AVX-512) going to be added
(which would make the current situation even worse), facilitate
reduction of build time (and hence latency to availability of test
results) via use of make's -j option.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
... and their AVX equivalents. Note that a few instructions aren't
covered (yet), but those all fall into common pattern groups, so I
would hope that for now we can do with what is there.
Just like for SSE/SSE2, MMX insns aren't being covered at all, as
they're not easy to deal with: The compiler refuses to emit such for
other than uses of built-in functions.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
... and their AVX equivalents. Note that a few instructions aren't
covered (yet), but those all fall into common pattern groups, so I
would hope that for now we can do with what is there.
MMX insns aren't being covered at all, as they're not easy to deal
with: The compiler refuses to emit such for other than uses of built-in
functions.
The current way of testing AVX insns is meant to be temporary only:
Once we fully support that feature, the present tests should rather be
replaced than full ones simply added.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Both the build logic and the invocation have their blowfish specific
aspects abstracted out here. Additionally
- run native execution (if suitable) first (as that one failing
suggests a problem with the to be tested code itself, in which case
having the emulator have a go over it is kind of pointless)
- move the 64-bit tests up in blobs[] so 64-bit native execution will
also precede 32-bit emulation (on 64-bit systems only of course)
- instead of -msoft-float (we'd rather not have the compiler generate
such code), pass -fno-asynchronous-unwind-tables and -g0 (reducing
binary size of the helper images as well as [slightly] compilation
time)
- skip tests with zero length blobs (these can result from failed
compilation, but not failing the build in this case seems desirable:
it may allow partial testing - e.g. with older compilers - and
permits manually removing certain tests from the generated headers
without having to touch actual source code)
- constrain rIP to the actual blob range rather than looking for the
specific (fake) return address put on the stack
- also print the opcode when x86_emulate() fails
- print at least three progress dots (for relatively short tests)
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Several `ln -sf` can race with each other. Provide dedicated targets
for soft-linking directories.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Change the names used in code according to numeric values. Remove the
now unused macros in x86_emualte.c and fix indentation. This in turns
requires including msr-index.h and removing duplicates in userspace
x86_emulate.c in userspace harness program.
No functional change.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Basically this patch does 's/EFLG_/X86_EFLAGS_/g' and with indentation
fixed up. And remove the duplicates in x86_emualte.c. This in turn
requires userspace test harness to include x86-defns.h. Also remove a
few duplicates in userspace harness program.
No functional change.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Jan Beulich
Andrew Cooper
Christopher Clark
Roger Pau Monne
George Dunlap
Wei Liu