Modify libxl_vcpu_sched_params_get/set and sched_rtds_vcpu_get/set
functions to support per-VCPU extratime flag
Signed-off-by: Meng Xu <mengxu@cis.upenn.edu>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Reviewed-by: Dario Faggioli <raistlin@linux.it>
Mixed throughout libxc are uint32_t, int, and domid_t for domid parameters.
With a signed type, and an explicitly 16-bit type, it is exceedingly difficult
to construct an INVALID_DOMID constant which works with all of them. (The
main problem being that domid_t gets unconditionally zero extended when
promoted to int for arithmatic.)
Libxl uses uint32_t consistently everywhere, so alter libxc to match.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Release-acked-by: Julien Grall <julien.grall@linaro.org>
[ wei: fix compilation error in libxl ]
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Previously when trying to boot a PV capable but not PVH capable kernel
inside of a PVH container xc_dom_guest_type would succeed and return a
PV guest type, which would lead to failures later on in the build
process.
Instead provide a clear error message when trying to create a PVH
guest using a kernel that doesn't support PVH.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
I.e. those not being equivalents of SSEn ones.
There's one necessary change to generic code: Faulting behavior of
VMASKMOVP{S,D} requires us to do partial reads/writes.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
This is in line with the previous behavior, setting the number of
maptrack frames to 0 will prevent driver domains from working
correctly.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
libxl_domain_build_info had both the maptrack and grant frames set to
0 by default, forcing the client of libxl to set a sane default.
This is not backwards compatible, so instead initialize both
max_grant_frames and max_maptrack_frames to a sane default (ie: like
previous behavior).
This fixes the libvirt tests in osstest.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Once feof() returns true for a stream, it will continue to return true
for that stream until clearerr() is called (or the stream is closed
and re-opened).
In llvm-clang-fast-mode, the same file descriptor is used for each
iteration of the loop, meaning that the "Input too large" check was
broken -- feof() would return true even if the fread() hadn't hit the
end of the file. The result is that AFL generates testcases of
arbitrary size.
Fix this by clearing the error after each iteration.
Signed-off-by: George Dunlap <george.dunlap@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Commit c07574b reorganized the way fuzzing was done, explicitly
creating a structure that the input data would be copied into.
Unfortunately, the cpu register state used by the emulator is on the
stack; it's cleared, but data is never copied into it.
If we're explicitly setting an entirely new cpu_regs struct for each
new input anyway, there's no need to have two copies around anymore;
just point to the one in the data structure.
Signed-off-by: George Dunlap <george.dunlap@citrix.com>
Reviewed-by: Wei Liu <wei.liu2@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
fuzz_insn_fetch() is the only data access helper where it is possible
to see offsets larger than 4Gb in 16- or 32-bit modes, as we leave the
incoming rIP untouched in the emulator itself. The check is needed here
as otherwise, after successfully fetching insn bytes, we may end up
zero-extending EIP soon after complete_insn, which collides with the
X86EMUL_EXCEPTION-conditional respective ASSERT() in
x86_emulate_wrapper(). (NB: put_rep_prefix() is what allows
complete_insn to be reached with rc set to other than X86EMUL_OKAY or
X86EMUL_DONE. See also commit 53f87c03b4 ["x86emul: generalize
exception handling for rep_* hooks"].)
Add assert()-s for all other (data) access routines, as effective
address generation in the emulator ought to guarantee in-range values.
For them to not trigger, several adjustments to the emulator's address
calculations are needed: While the DstBitBase one is really mandatory,
the specification allows for either original or new behavior for two-
part accesses. Observed behavior on real hardware, however, is for such
accesses to silently wrap at the 2^^32 boundary in other than 64-bit
mode, just like they do at the 2^^64 boundary in 64-bit mode, which our
code is now being brought in line with. While adding truncate_ea()
invocations there, also convert open coded instances of it.
Reported-by: George Dunlap <george.dunlap@citrix.com>
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: George Dunlap <george.dunlap@citrix.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Unilaterally making string.h a prerequisite for console.h is going to
break build for a lot of consumers of console.h.
Define a macro for the new flex ring. Consumers which want to use it
should define the macro.
Partially revert af8d935641.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Fixes compilation error like:
libxl_console.c: In function ‘libxl__device_vuart_add’:
libxl_console.c:379:5: error: format ‘%lu’ expects argument of type ‘long unsigned int’, but argument 3 has type ‘xen_pfn_t’ [-Werror=format=]
flexarray_append(ro_front, GCSPRINTF("%lu", state->vuart_gfn));
Reported-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Tested-by: Bhupinder Thakur <bhupinder.thakur@linaro.org>
It makes more sense to put a tool to be used by other subsystems
to be in 'tools/misc' along 'mkrpm','mkdeb', etc.
The patch titled "xen/livepatch/x86/arm32: Force .livepatch.depends
section to be uint32_t aligned" uses mkhex.
Acked-by: Wei Liu <wei.liu2@citrix.com>
Suggested-by: Julien Grall <julien.grall@arm.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
There is no reason to hardcode "x" in code. Use "w" which is passed
by the higher level.
This change requires us to allow "x" to be unused so that the
top-level enum parse_json functions continue to compile.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
The SBSA UART node format is as specified in
Documentation/devicetree/bindings/serial/arm_sbsa_uart.txt and given below:
ARM SBSA defined generic UART
------------------------------
This UART uses a subset of the PL011 registers and consequently lives
in the PL011 driver. It's baudrate and other communication parameters
cannot be adjusted at runtime, so it lacks a clock specifier here.
Required properties:
- compatible: must be "arm,sbsa-uart"
- reg: exactly one register range
- interrupts: exactly one interrupt specifier
- current-speed: the (fixed) baud rate set by the firmware
Currently the baud rate of 115200 has been selected as a default value,
which is one of the valid baud rate settings. Higher baud rate was
selected since an emulated pl011 can support any valid baud rate without
any limitation of the hardware.
Signed-off-by: Bhupinder Thakur <bhupinder.thakur@linaro.org>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Acked-by: Wei Liu <wei.liu2@citrix.com>
This patch finally adds the support for vuart console. It adds
two new fields in the console initialization:
- optional
- use_gnttab
optional flag tells whether the console is optional.
use_gnttab tells whether the ring buffer should be allocated using
grant table.
The VUART console is enabled ony for ARM.
Signed-off-by: Bhupinder Thakur <bhupinder.thakur@linaro.org>
Acked-by: Wei Liu <wei.liu2@citrix.com>
This patch adds the support for multiple consoles and introduces the
iterator functions to operate on multiple consoles.
The functions called by the iterators check that they are operating
on valid I/O parameters. This ensures that if a particular console is
not initialized then the functions will not do anything for that
console type.
This patch is in preparation to support a new vuart console.
Signed-off-by: Bhupinder Thakur <bhupinder.thakur@linaro.org>
Acked-by: Wei Liu <wei.liu2@citrix.com>
This patch introduces a new handle_console_ring function. This function
reads the data from the ring buffer on receiving an event.
The initialization of event channel poll fd to -1 is moved inside the
handle_console_ring function as they are related. There should be no
change in the behavior as there is no functional change.
Signed-off-by: Bhupinder Thakur <bhupinder.thakur@linaro.org>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Acked-by: Wei Liu <wei.liu2@citrix.com>
This patch introduces a new console_evtchn_unmask function. This function
unmasks the console event channel if it is masked for some timeout
period.
One optimization that has been done is to merge the two for loops.
One for loop was used to iterate through all domains and
unmask the domain event channels which had been rate limited for a
specified duration.
The other for loop was run to add the event channel fd and the tty fd to
the poll list.
These two for loops were merged so that the these operations can be done
in one iteration instead of two iterations.
Signed-off-by: Bhupinder Thakur <bhupinder.thakur@linaro.org>
Acked-by: Wei Liu <wei.liu2@citrix.com>
This patch introduces a new maybe_add_console_tty_fd function. This function
adds the tty fd to the list of polled fds.
Signed-off-by: Bhupinder Thakur <bhupinder.thakur@linaro.org>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Acked-by: Wei Liu <wei.liu2@citrix.com>
This patch introduces a new maybe_add_console_evtchn_fd function. This
function adds the console event channel FD to list of polled FDs.
Signed-off-by: Bhupinder Thakur <bhupinder.thakur@linaro.org>
Acked-by: Wei Liu <wei.liu2@citrix.com>
This patch introduces a new console_init function. This function
initializes the console structure.
Signed-off-by: Bhupinder Thakur <bhupinder.thakur@linaro.org>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Xenconsole functions take domain structure as input. These functions shall be
modified to take console structure as input since these functions typically perform
console specific operations.
Also the console specific functions starting with prefix "domain_" shall be modified
to "console_" to indicate that these are console specific functions.
This patch is in preparation to support multiple consoles to support vuart console.
Signed-off-by: Bhupinder Thakur <bhupinder.thakur@linaro.org>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
Acked-by: Wei Liu <wei.liu2@citrix.com>
The console->conspath name is changed to console->xspath as it is
clear from the name that it is referring to xenstore path.
Signed-off-by: Bhupinder Thakur <bhupinder.thakur@linaro.org>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Xenconsole uses a domain structure which contains console specific fields. This
patch defines a new console structure, which would be used by the xenconsole
functions to perform console specific operations like reading/writing data from/to
the console ring buffer or reading/writing data from/to console tty.
This patch is in preparation to support multiple consoles to support vuart console.
Signed-off-by: Bhupinder Thakur <bhupinder.thakur@linaro.org>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Add a new vuart console node to xenstore. This node is added at
/local/domain/$DOMID/vuart/0.
The node contains information such as the ring-ref, event channel,
buffer limit and type of console.
Xenconsole reads the node information to setup the ring buffer and
event channel for sending/receiving vuart data.
Signed-off-by: Bhupinder Thakur <bhupinder.thakur@linaro.org>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
Add a new domctl API to initialize vpl011. It takes the GFN and console
backend domid as input and returns an event channel to be used for
sending and receiving events from Xen.
Xen will communicate with xenconsole using GFN as the ring buffer and
the event channel to transmit and receive pl011 data on the guest domain's
behalf.
Signed-off-by: Bhupinder Thakur <bhupinder.thakur@linaro.org>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Acked-by: Wei Liu <wei.liu2@citrix.com>
An option is provided in libxl to enable/disable SBSA vuart while
creating a guest domain.
Libxl now supports a generic vuart console and SBSA uart is a specific type.
In future support can be added for multiple vuart of different types.
User can enable SBSA vuart by adding the following line in the guest
configuration file:
vuart = "sbsa_uart"
Signed-off-by: Bhupinder Thakur <bhupinder.thakur@linaro.org>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
DEFINE_XEN_FLEX_RING(xencons) defines common helper functions such as
xencons_queued() to tell the current size of the ring buffer,
xencons_mask() to mask off the index, which are useful helper functions.
pl011 emulation code will use these helper functions.
io/console.h includes io/ring.h which defines DEFINE_XEN_FLEX_RING.
In console/daemon/io.c, string.h had to be included before io/console.h
because ring.h uses string functions.
Signed-off-by: Bhupinder Thakur <bhupinder.thakur@linaro.org>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
If case of a vm_event with the emulate_flags set, if the instruction
is not implemented by the emulator, the monitor should be notified instead
of directly injecting a hw exception.
This behavior can be used to re-execute an instruction not supported by
the emulator using the real processor (e.g. altp2m) instead of just
crashing.
Signed-off-by: Petre Pircalabu <ppircalabu@bitdefender.com>
Acked-by: Tamas K Lengyel <tamas@tklengyel.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Paul Durrant <paul.durrant@citrix.com>
And the xl.cfg man page documentation.
It should be possible to re-introduce it in the future with a proper
implementation, in order to create a HVM guest without a device model,
which is slightly different from a PVHv2 guest.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
This also includes the x86 ACPI related functions. Remove support for
device model "none"
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Remove the usage of device model "none" in the migration stream
related functions.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Meng Xu
Andrew Cooper
Roger Pau Monne
Jan Beulich
George Dunlap
Wei Liu
Konrad Rzeszutek Wilk
Bhupinder Thakur
Petre Pircalabu