The size should be in bytes not 32-bit words. Fixes graphics
corruption issues for HVM guests due to bouncing too little data.
Also the dirty_bitmap buffer is output only and therefore only needs
bouncing in one direction.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
With newer (pvops) kernels logs get flooded with this iptables
warning: physdev match: using --physdev-out in the OUTPUT, FORWARD and
POSTROUTING chains for non-bridged traffic is not supported anymore
Using the --physdev-is-bridged option prevents this.
See also: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=571634#10
Signed-off-by: Sander Eikelenboom <linux@eikelenboom.it>
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
hvmloader is responsible for - amoungst other things - initialising
the PCI device BARs prior to loading the guest BIOS. The previous
code only probed for devfn up to 128. The lower 3 bits are function
IDs so this meant that only devices in slots 0-15 were actually being
initialized.
Signed-off-by: Alex Zeffertt <alex.zeffertt@eu.citrix.com>
Acked-by: Gianni Tedesco <gianni.tedesco@citrix.com>
This change some fadt values -- the address of the acpi ioports -- and
the pm1a_evt_address value wrote for the pci bus.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
This patch adds an explicit update mechanism:
make tools/ioemu-dir-force-update
This isn't brilliant but is better than doing "cd tools/ioemu-remote
&& git reset --hard <sha1...>" by hand.
Note that invoking this target will destroy all working tree changes
made to qemu-xen.
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
As part of the QEMU/Xen merge, this patch comes to change the value of
sleep states and add some information in the PCI registers to match the
implementation of the BIOS of QEMU.
It also does a hypercall (HVM_PARAM_ACPI_IOPORTS_LOCATION) that tell the
Xen to use the new Port I/O instead of the old one.
[ Also, in this patch, update QEMU_TAG to the qemu-xen revision
with the corresponding qemu change. -iwj ]
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
The implementation of xl was lacking a lot of consts on its char*s.
In this patch we improve matters. It doesn't fix everything. In
particular:
* I only changed char*s and not other structs that ought to be const.
* libxl_send_debug_keys should take a const char* but the pointer
ends up getting sent to DECLARE_HYPERCALL_BOUNCE from xc_private.h
and that won't take a const char*. I wasn't sure what to do so
I have left it.
* There is a great deal of in-place string tokenisation (both
ad-hoc, and using strtok_r). I haven't changed any of that.
* I haven't changed any of the occurrences of char **argv because of
the castless assignment incompatibility between const char** and
char **.
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Attempting to define or create a domain whose XML config contains a
passthru PCI device fails with libvirt
xen84: # cat win2k8r2.xml
...
<hostdev mode='subsystem' type='pci' managed='no'>
<source>
<address domain='0x0000' bus='0x01' slot='0x00' function='0x0'/>
</source>
</hostdev>
...
xen84: # virsh create ./win2k8r2.xml
error: Failed to create domain from ./win2k8r2.xml
error: POST operation failed: xend_post: error from xen daemon:
(xend.err "Error creating domain: 'key'")
The PCI device config maintained by xend includes a 'key' field, which is
initialized by xm client when using that tool and traditional xen config
file. libvirt, which uses xend's sexpr-over-http interface (is that the
proper name for that interface??), does not initialize this field - and
shouldn't be expected to do so IMO. Clients should not be bothered with
xend's internal representation of a PCI device.
This patch populates the 'key' field within xend if it is uninitialized,
similar to current initialization of 'uuid' field. The 'vdevfn' field
suffers a similar problem if not (optionally) specified by user.
AFAICT, the xm client initializes 'vdevfn' to 0x100 if not specified so
I've done the same here.
Signed-off-by: Jim Fehlig <jfehlig@novell.com>
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
I have tested the patch in the following senarios:
1> Non-xsave platform
2> Xsave-capable platform, guest does not support xsave, xen support xsave
3> Xsave-capable platform, guest does support xsave, xen supports xsave
4> Guest (non-xsave) saved on platform without xsave, restored on a
Xsave-capable system.
All passed.
Signed-off-by: Shan Haitao <haitao.shan@intel.com>
Signed-off-by: Han Weidong <weidong.han@intel.com>
Correction/Extension of changeset 22000:4fc66044477d
"Values of cpu_weight and cpu_cap are lost after xend restart"
Values of cpu_weight and cpu_cap taken from managed SXP file have to
be converted from str to int.
Signed-off-by: Lutz Dube <lutz.dube@ts.fujitsu.com>
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
We should bounce the buffers themselves, not the pointers to them!
Error introduced by 22292:a1b39d2b9001 and reported by Yang Z Zhang.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
This patch fixes compilation errors by 22275:e95dc0eb152d:
ia64/xc_ia64_linux_save.c:797: error: too few arguments to function 'callbacks->switch_qemu_logdirty'
and applies 22285:36a317494429 to ia64.
Signed-off-by: KUWAMURA Shin'ya <kuwa@jp.fujitsu.com>
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Cpumap types in tools (libxc and libxl) are changed to be based on bytes like
in the interface to the hypervisor.
To make handling easier the size of used cpumaps is always based on the
number of physical cpus supported by the hypervisor. This eliminates the need
to keep track of the cpumap size in external interfaces.
In libxl a macro for cycling through a cpumap is added (libxl_for_each_cpu).
Interfaces changed:
libxl_set_vcpuaffinity()
libxl_cpumap_alloc()
xc_vcpu_setaffinity()
xc_vcpu_getaffinity()
xc_cpupool_freeinfo()
Signed-off-by: Juergen Gross <juergen.gross@ts.fujitsu.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Not checking leads to warn_unused_result checks triggering in some
libraries and compilers. Combined with -Werror this breaks the build.
Signed-off-by: Gianni Tedesco <gianni.tedesco@citrix.com>
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
22066:eccfdeb41b80 replaced tools/libxc/ia64/aclinux.h with
xen/include/acpi/platform/aclinux.h.
Because both are incompatible, tools cannot be built on ia64.
This patch fixes compilation errors by defining identifiers at
ac_ia64_tools.h.
Signed-off-by: KUWAMURA Shin'ya <kuwa@jp.fujitsu.com>
Sometimes we would rather connect to an HVM's serial console than it's
VGA display. In this case we cannot see or interact with the ethernet
booting process. This is a bit annoying so let's just enable it.
Signed-off-by: Gianni Tedesco <gianni.tedesco@citrix.com>
When using cpupools don't pin vcpus to numa nodes as this might
conflict with the cpupool definition.
numa placement should be handled by cpupool configuration instead.
Signed-off-by: Juergen Gross <juergen.gross@ts.fujitsu.com>
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
In the default "QemuDeviceModelRecord"-style HVM tail of the migration
protocol the size of the qemu save record is unknown at the receiver
and therefore it must read until EOF. This is not compatible with the
xl migration protocol which contains a post-migration handshake and
therefore cannot close the socket on the sending end.
What is required is an explicit length field for the save record,
which the "RemusDeviceModelState"-style HVM tail includes.
Rather than overload the "RemusDeviceModelState" name for a non-Remus
use case (on off chance that they need to diverge for some reason in
the future) introduce a third style called "DeviceModelRecord0002"
which is identical to current "RemusDeviceModelState"-style.
Hopefully the inclusion of a number here will allow easier extension
in the future without needing to come up with increasingly less
helpful names!
Also propagate errors from xc_domain_save and
libxl__domain_suspend_common to callers.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
There are a few places where libxl__xs_write is passed a variable
value to write to xenstore, but the semantics are that the first char*
is a format string. So use "%s".
This fixes the following errors reported by some newer compilers:
libxl.c: In function "libxl_create_cpupool":
libxl.c:3981: error: format not a string literal and no format arguments
libxl.c:3983: error: format not a string literal and no format arguments
libxl.c: In function "libxl_cpupool_movedomain":
libxl.c:4095: error: format not a string literal and no format arguments
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Gianni Tedesco <gianni.tedesco@citrix.com>
libxl_set_memory_target tries to set the memory target for a given
domain to new_target_memkb. The function includes a check to make sure
that dom0's memory is not reduced below a minimal threshold ie.
LIBXL_MIN_DOM0_MEM. However, this check is performed before the
new_target_memkb variable is properly initialised - when the value is
always zero. This means that the check always fails. Fix this by moving
the test to happen after the proper initialisation of new_target_memkb.
Signed-off-by: Gianni Tedesco <gianni.tedesco@citrix.com>
Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
gdbsx hacks CFLAGS to remove optimisations for easier debugging, however
this breaks dep generation due to an early evaluation of CFLAGS and
leaves stale files called "..d" after a make clean. We could possibly
fix this by separating dep generation from the rest of CFLAGS but it
seems a little invasive. The gdbsx hackers can do their own thing during
development and testing anyway...
Signed-off-by: Gianni Tedesco <gianni.tedesco@citrix.com>
When trying to live migrate guest with great memory (e.g. 20 GB),
there's delay caused by destroying source copy of domain. To speed up
this process we can close socket before starting guest destroy, as
source guest is not running anymore.
Signed-off-by: Miroslav Rezanina <mrezanin@redhat.com>
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
kdd runs in dom0, attaches to a domain and speaks the Windows kd serial
protocol over a TCP connection (which should go to kd or windbg, e.g.
by having another VM with its virtual COM1 set up as a TCP listener).
It doesn't do breakpoints &c yet, and windbg can get quite confused
since the kernel debugger's not actually running, but it's good enough
to extract backtraces from wedged VMs.
Signed-off-by: Tim Deegan <Tim.Deegan@citrix.com>
The callback return convention follows xc_domain_save and therefore
returns 0 on success and >0 on error, correct the check accordingly.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
On restore:
region_mfn is passed to xc_map_foreign_range and
xc_map_foreign_bulk. In both cases the buffer is accessed from the
ioctl handler in the kernel and not from any hypercall. Therefore
normal copy_{to,from}_user handling in the kernel will cope with any
faulting access.
p2m_batch is passed to xc_domain_memory_populate_physmap which takes
care of bouncing the buffer already.
On save:
pfn_type is passed to xc_map_foreign_bulk which does not need locking
as per region_mfn above.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Ian Jackson <ian.jackson.citrix.com>
Keir Fraser
Ian Campbell
Sander Eikelenboom
Anthony Perard
KUWAMURA Shin'ya
Ian Jackson
Jim Fehlig
Lutz Dube
Juergen Gross
Gianni Tedesco
Miroslav Rezanina
Tim Deegan