Older gcc does not support #pragma GCC diagnostics, so use alternative
approach - change variable type to uint32_t (this code handle 32-bit
requests only anyway), which apparently also avoid gcc complaining about
this (otherwise correct) code.
Fixes 437e00fea0 "tools/kdd: mute spurious
gcc warning"
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Release-acked-by: Juergen Gross <jgross@suse.com>
Acked-by: Tim Deegan <tim@xen.org>
To combat GPZ SP4 "Speculative Store Bypass", Intel have extended their
speculative sidechannel mitigations specification as follows:
* A feature bit to indicate that Speculative Store Bypass Disable is
supported.
* A new bit in MSR_SPEC_CTRL which, when set, disables memory disambiguation
in the pipeline.
* A new bit in MSR_ARCH_CAPABILITIES, which will be set in future hardware,
indicating that the hardware is not susceptible to Speculative Store Bypass
sidechannels.
For contemporary processors, this interface will be implemented via a
microcode update.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
The exact value of cpu_khz can only be obtained via 'xl dmesg', and
therefore can be lost after some time. 'xl info' truncates the value to
full MHz. Adjust the output to show the full khz value.
This helps the host admin to track how a host has calibrated itself. The
value of cpu_khz is used during live migration for the decision if
access to TSC should be emualted.
Commit eb5277a30e ("bitkeeper revision 1.959.1.4
(40d04a87acOb29u-5Y5OxMhHvP2x9g)" gives no hint why cpu_mhz instead of
cpu_khz was chosen.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Release-acked-by: Juergen Gross <jgross@suse.com>
CC xenctrl_stubs.o
xenctrl_stubs.c: In function 'failwith_xc':
xenctrl_stubs.c:65:17: error: 'snprintf' output may be truncated before the last format character [-Werror=format-truncation=]
"%d: %s: %s", error->code,
^
xenctrl_stubs.c:64:4: note: 'snprintf' output 6 or more bytes (assuming 1029) into a destination of size 1028
snprintf(error_str, sizeof(error_str),
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
"%d: %s: %s", error->code,
~~~~~~~~~~~~~~~~~~~~~~~~~~
xc_error_code_to_desc(error->code),
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
error->message);
~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
make[8]: *** [/build/xen-git/src/xen/tools/ocaml/libs/xc/../../Makefile.rules:37: xenctrl_stubs.o] Error 1
m
Signed-off-by: John Thomson <git@johnthomson.fastmail.com.au>
Acked-by: Christian Lindig <christian.lindig@citrix.com>
Release-acked-by: Juergen Gross <jgross@suse.com>
New versions of iasl have introduced improved C file generation, as
reported in the changelog:
iASL: Enhanced the -tc option (which creates an AML hex file in C,
suitable for import into a firmware project):
1) Create a unique name for the table, to simplify use of multiple
SSDTs.
2) Add a protection #ifdef in the file, similar to a .h header file.
The net effect of that on generated files is:
-unsigned char AmlCode[] =
+#ifndef __SSDT_S4_HEX__
+#define __SSDT_S4_HEX__
+
+unsigned char ssdt_s4_aml_code[] =
The above example is from ssdt_s4.asl.
Fix the build with newer versions of iasl by stripping the '_aml_code'
suffix from the variable name on generated files.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Release-acked-by: Juergen Gross <jgross@suse.com>
A user may choose to set his/her own PKG_CONFIG_PATH, which is useful in the
case of cross-compiling. We don't want to completely override the
PKG_CONFIG_PATH, just add to it.
Signed-off-by: Stewart Hildebrand <stewart.hildebrand@dornerworks.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Release-acked-by: Juergen Gross <jgross@suse.com>
PVH guests with 4GB of RAM or more get a memory map like the
following:
0x00000000000000 - 0x000000fee00000 RAM
0x000000fee00000 - 0x00000100000000 RESERVED
0x000000fc009000 - 0x000000fc009040 ACPI
0x000000fc000000 - 0x000000fc001000 ACPI
0x000000fc001000 - 0x000000fc009000 ACPI
0x00000100000000 - 0x000001fb200400 RAM
This is wrong because ACPI regions overlap with RAM regions. The cause
of this issue is not setting a big enough MMIO hole and marking the
whole MMIO hole as reserved, when it actually contains several pieces:
- local APIC page.
- ACPI tables.
- HVM special pages.
Of those items only HVM special pages need to be marked as reserved in
order to advise the guest against using them for example for memory
hotplug.
After the fix the layout reported for the same guest is:
0x00000000000000 - 0x000000fc000000 RAM
0x000000feff8000 - 0x000000ff000000 RESERVED
0x000000fc009000 - 0x000000fc009040 ACPI
0x000000fc000000 - 0x000000fc001000 ACPI
0x000000fc001000 - 0x000000fc009000 ACPI
0x00000100000000 - 0x000001fe000400 RAM
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Release-acked-by: Juergen Gross <jgross@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Currently building the shim will modify shim.config in case some config
option was added or modified in the hypervisor.
Avoid that by copying shim.config to an intermediate file instead.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Current interface to the gntdev in FreeBSD is wrong, and mostly worked
out of luck before the PTI FreeBSD fixes, when kernel and user-space
where sharing the same page tables.
On FreeBSD ioctls have the size of the passed struct encoded in the ioctl
number, because the generic ioctl handler in the OS takes care of
copying the data from user-space to kernel space, and then calls the
device specific ioctl handler. Thus using ioctl structs with variable
sizes is not possible.
The fix is to turn the array of structs at the end of
ioctl_gntdev_alloc_gref and ioctl_gntdev_map_grant_ref into pointers,
that can be properly accessed from the kernel gntdev driver using the
copyin/copyout functions. Note that this is exactly how it's done for
the privcmd driver.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Release-acked-by: Juergen Gross <jgross@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
qemu upstream uses git submodules. git archive does not work with git
submodules (and could not work properly with them, because this is one
of the many things it is inherently impossible to do correctly with
git submodules).
qemu upstream have worked around this by providing a rather scary
shell script which attempts to do roughly the right thing. It's close
enough that we can use it with only minor precautions.
Unfortunately this does mean that `mktarball' now executes the qemu
source code it was using, rather than merely shuffling it about, as it
did previously. I think this is a less bad ill than copying (and,
effectively, forking) the scary script.
CC: Wei Liu <wei.liu2@citrix.com>
CC: George Dunlap <george.dunlap@eu.citrix.com>
CC: Juergen Gross <jgross@suse.com>
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Acked-by: George Dunlap <george.dunlap@citrix.com>
c/s 74fd984ae "tools/libxl: Drop xc_domain_configuration_t from
libxl__domain_build_state" removed state->config completely but missed
some conversion libxl_arm.c.
Furthermore, not all the fields of xc_domain_configuration_t have a
corresponding field in libxl_domain_build_info. This is the case of
clock_frequency. As the field should not be exposed to the user, add a
corresponding field in libxl__domain_build_state. This require some
modification in the prototype of libxl__domain_make in order to have the
state.
For all the other fields, use the up-to-date version in
libxl_domain_build_info.
Signed-off-by: Julien Grall <julien.grall@arm.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Release-acked-by: Juergen Gross <jgross@suse.com>
Commit 4a5733771e ("libxl: put RSDP for PVH guest near 4GB") breaks
pre-4.17 Linux guests since they do not use start_info's rsdp_paddr
pointer and instread scan BIOS memory for RSDP signature.
Introduce XENFEAT_linux_rsdp_unrestricted feature flag that indicates
whether the guest can handle RSDP at locations pointed to by
rsdp_paddr.
Since only Linux PVH guests suffer from this problem (BSD has always
relied on rsdp_paddr) we check this flag just for those guests. If the
flag is not set we place RSDP in BIOS, as before.
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Release-acked-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: George Dunlap <george.dunlap@citrix.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
When xenstore was ported to the new safe-string interface, it mostly
happened by making copyies of string into bytes and back. The ideal
fix would be to rewrite all of the relevant interfaces to be uniformly
using bytes, but in the meanwhile we can improve the code by using unsafe
conversion functions (see
https://caml.inria.fr/pub/docs/manual-ocaml/libref/Bytes.html#3_Unsafeconversionsforadvancedusers).
In most cases we own the bytes that we are converting to string, or we
immediately make copies that we then mutate, or we use them immutably
as payloads for writes. In all these cases it is safe to use the unsafe
functions and prevent a copy.
This patch updates the code to use the unsafe conversions where possible.
Signed-off-by: Marcello Seri <marcello.seri@citrix.com>
Reviewed-by: Christian Lindig <christian.lindig@citrix.com>
Release-acked-by: Juergen Gross <jgross@suse.com>
c/s 74fd984ae "tools/libxl: Drop xc_domain_configuration_t from
libxl__domain_build_state" removed state->config completely, but the GIC
version is available in info. Use the up-to-date version.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Release-Acked-by: Juergen Gross <jgross@suse.com>
gcc-8 complains:
kdd.c:698:13: error: 'memcpy' offset [-204, -717] is out of the bounds [0, 216] of object 'ctrl' with type 'kdd_ctrl' {aka 'union <anonymous>'} [-Werror=array-bounds]
memcpy(buf, ((uint8_t *)&ctrl.c32) + offset, len);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
kdd.c: In function 'kdd_select_callback':
kdd.c:642:14: note: 'ctrl' declared here
kdd_ctrl ctrl;
^~~~
But this is impossible - 'offset' is unsigned and correctly validated
few lines before.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Release-Acked-by: Juergen Gross <jgross@suse.com>
gcc-8 complains:
vhd-util-read.c: In function 'vhd_util_read':
vhd-util-read.c:50:24: error: '%lu' directive output may be truncated writing between 1 and 20 bytes into a region of size 15 [-Werror=format-truncation=]
snprintf(nbuf, nsize, "%" PRIu64, num);
^~~
vhd-util-read.c:50:25: note: format string is defined here
snprintf(nbuf, nsize, "%" PRIu64, num);
vhd-util-read.c:50:24: note: directive argument in the range [0, 18446744073709551614]
snprintf(nbuf, nsize, "%" PRIu64, num);
^~~
vhd-util-read.c:50:2: note: 'snprintf' output between 2 and 21 bytes into a destination of size 15
snprintf(nbuf, nsize, "%" PRIu64, num);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
vhd-util-read.c:43:24: error: '%#lx' directive output may be truncated writing between 1 and 18 bytes into a region of size 15 [-Werror=format-truncation=]
snprintf(nbuf, nsize, "%#" PRIx64 , num);
^~~~
vhd-util-read.c:43:25: note: format string is defined here
snprintf(nbuf, nsize, "%#" PRIx64 , num);
vhd-util-read.c:43:24: note: directive argument in the range [0, 18446744073709551614]
snprintf(nbuf, nsize, "%#" PRIx64 , num);
^~~~
vhd-util-read.c:43:2: note: 'snprintf' output between 2 and 19 bytes into a destination of size 15
snprintf(nbuf, nsize, "%#" PRIx64 , num);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Make the buffer larger.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Release-Acked-by: Juergen Gross <jgross@suse.com>
gcc-8 complains:
tapdisk-vbd.c: In function 'tapdisk_vbd_resume_ring':
tapdisk-vbd.c:1671:53: error: 'snprintf' output may be truncated before the last format character [-Werror=format-truncation=]
snprintf(params.name, sizeof(params.name) - 1, "%s", message);
^
tapdisk-vbd.c:1671:3: note: 'snprintf' output between 1 and 256 bytes into a destination of size 255
snprintf(params.name, sizeof(params.name) - 1, "%s", message);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
The "- 1" in buffer size should be actually applied to message, to leave
place for terminating '\0', not the other way around (truncate '\0' even
if it would fit).
In function 'tapdisk_control_open_image',
inlined from 'tapdisk_control_handle_request' at tapdisk-control.c:660:10:
tapdisk-control.c:465:2: error: 'strncpy' specified bound 256 equals destination size [-Werror=stringop-truncation]
strncpy(params.name, vbd->name, BLKTAP2_MAX_MESSAGE_LEN);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In function 'tapdisk_control_create_socket',
inlined from 'tapdisk_control_open' at tapdisk-control.c:836:9:
tapdisk-control.c:793:2: error: 'strncpy' specified bound 108 equals destination size [-Werror=stringop-truncation]
strncpy(saddr.sun_path, td_control.path, sizeof(saddr.sun_path));
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
block-qcow.c: In function 'qcow_create':
block-qcow.c:1216:5: error: 'strncpy' specified bound 4096 equals destination size [-Werror=stringop-truncation]
strncpy(backing_filename, backing_file,
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
sizeof(backing_filename));
~~~~~~~~~~~~~~~~~~~~~~~~~
I those cases, reduce size of copied string and make sure final '\0' is
added.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Release-Acked-by: Juergen Gross <jgross@suse.com>
gcc-8 complains:
gx_main.c: In function 'prepare_stop_reply':
gx_main.c:385:9: error: 'strncpy' output truncated before terminating nul copying 6 bytes from a string of the same length [-Werror=stringop-truncation]
strncpy(buf, "watch:", 6);
^~~~~~~~~~~~~~~~~~~~~~~~~
Since terminating '\0' isn't needed here at all, switch to memcpy.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Release-Acked-by: Juergen Gross <jgross@suse.com>
gcc-8 complains:
xen-lowmemd.c: In function 'handle_low_mem':
xen-lowmemd.c:80:55: error: '%s' directive output may be truncated writing up to 511 bytes into a region of size 489 [-Werror=format-truncation=]
snprintf(error, BUFSZ,"Failed to write target %s to xenstore", data);
^~ ~~~~
xen-lowmemd.c:80:9: note: 'snprintf' output between 36 and 547 bytes into a destination of size 512
snprintf(error, BUFSZ,"Failed to write target %s to xenstore", data);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In practice it wouldn't happen, because 'data' contains string
representation of 64-bit unsigned number (20 characters at most).
But place a limit to mute gcc warning.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Release-Acked-by: Juergen Gross <jgross@suse.com>
gcc-8 warns about possible truncation of trailing '\0'.
Final character is overridden by '\0' anyway, so don't bother to copy
it.
This fixes compile failure:
xc_pm.c: In function 'xc_set_cpufreq_gov':
xc_pm.c:308:5: error: 'strncpy' specified bound 16 equals destination size [-Werror=stringop-truncation]
strncpy(scaling_governor, govname, CPUFREQ_NAME_LEN);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Release-Acked-by: Juergen Gross <jgross@suse.com>
When 0-indexing, maximum index is num_entries - 1. The python xc library had a
sign error where the minus was replaced by a plus, making tools that depended
on it to look for CPUs that did not exist.
Signed-off-by: Petre Eftime <epetre@amazon.com>
Acked-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Release-acked-by: Juergen Gross <jgross@suse.com>
Similar functionality to libxl_domain_suspend(), but do not save domains
state to any file. Only suspend the domain and keep it in suspended
shutdown state (do not destroy it). Such domain can be later woken up
with libxl_domain_resume. The main reason for this functionality is to
suspend the host while some domains are running, potentially holding PCI
devices. This will give a chance to a driver in such a domain to
properly suspend the device.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Signed-off-by: Marcus of Wetware Labs <marcus@wetwa.re>
Acked-by: Wei Liu <wei.liu2@citrix.com>
This is a tools only hypercall so fine to change. Altering the name avoids
having confusing code such as config->config all over the hypervisor and
toolstack.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Julien Grall <julien.grall@arm.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
xc_config is only used by xc_domain_create(), but by calling
libxl__arch_domain_{prepare,save}_config() we clobber the real settings with
the default settings.
Move all data and calls relating to xc_domain_create() into the path which
calls it.
As far as I can tell, soft_reset has always been broken for ARM domains using
LIBXL_GIC_VERSION_DEFAULT, which elicits a hard error out of
libxl__arch_domain_save_config(), and only works on x86 because this function
is a no-op.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
The data it stores is initialised and exclusively used within
libxl__domain_make(), with the important details written back elsewhere by
libxl__arch_domain_save_config(). Prepare xc_config on libxl__domain_make()'s
stack, and drop the parameter.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
For the default EPT view we have xc_set_mem_access_multi(), which
is able to set an array of pages to an array of access rights with
a single hypercall. However, this functionality was lacking for the
altp2m subsystem, which could only set page restrictions for one
page at a time. This patch addresses the gap.
HVMOP_altp2m_set_mem_access_multi has been added as a HVMOP (as opposed to a
DOMCTL) for consistency with its HVMOP_altp2m_set_mem_access counterpart (and
hence with the original altp2m design, where domains are allowed - with the
proper altp2m access rights - to alter these settings), in the absence of an
official position on the issue from the original altp2m designers.
Signed-off-by: Razvan Cojocaru <rcojocaru@bitdefender.com>
Signed-off-by: Petre Pircalabu <ppircalabu@bitdefender.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Reviewed-by: George Dunlap <george.dunlap@citrix.com>
By using a static inline stub in private.h for OS where this functionality
is not implemented, the various duplicate stubs in the OS-specific source
modules can be avoided.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Certain memory resources associated with a guest are not necessarily
present in the guest P2M.
This patch adds the boilerplate for new memory op to allow such a resource
to be priv-mapped directly, by either a PV or HVM tools domain.
NOTE: Whilst the new op is not intrinsically specific to the x86 architecture,
I have no means to test it on an ARM platform and so cannot verify
that it functions correctly.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Acked-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Julien Grall <julien.grall@arm.com>
A subsequent patch will introduce a new scheme to allow an emulator to
map ioreq server pages directly from Xen rather than the guest P2M.
This patch lays the groundwork for that change by deferring mapping of
gfns until their values are requested by an emulator. To that end, the
pad field of the xen_dm_op_get_ioreq_server_info structure is re-purposed
to a flags field and new flag, XEN_DMOP_no_gfns, defined which modifies the
behaviour of XEN_DMOP_get_ioreq_server_info to allow the caller to avoid
requesting the gfn values.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
We will later copy it to hvm_start_info.
(Also remove stale comment claming that xc_dom_image.start_info_seg is
only used for HVMlite guests)
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Wei Liu <wei.liu2@citrix.com>
Since hvm_start_info has now been expanded to include memory map (i.e.
e820) we need to know size of this map by the time we create
dom->start_info_seg in alloc_magic_pages_hvm().
To do so we have to call libxl__arch_domain_construct_memmap() earlier,
before xc_dom_build_image(). And since libxl__arch_domain_construct_memmap()
is only used by for x86 we can make this call from x86's
libxl__arch_domain_finalise_hw_description(), at the same time removing
its NOP definition from ARM code and renaming and making it static in
libxl_x86.c
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Wei Liu <wei.liu2@citrix.com>
Allow the path to be set from a configure command line option.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
[ wei: run autogen.sh ]
Add a short entry to the xl.cfg man page about pvcalls.
Also add LIBXL_HAVE_PVCALLS to mark the presence of pvcalls support in
libxl.
Signed-off-by: Stefano Stabellini <stefano@aporeto.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Add pvcalls support to libxl and xl. Create the appropriate pvcalls
entries in xenstore.
Signed-off-by: Stefano Stabellini <stefano@aporeto.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
In my automated SLE_11 builds I often see failures like that:
[ 74s] wrappers.c:5:25: error: x86-emulate.h: No such file or directory
[ 74s] make[6]: *** [wrappers.o] Error 1
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Move line to where it belongs.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
This will lead to writing a wrong module command line physical memory
address if no command line is actually provided.
This hasn't caused problems so far because hvmloader is the only
consumer of the modules command line, and it's unconditionally set
in that case.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
The start_info size calculated in bootlate_hvm is wrong. It should use
HVMLOADER_MODULE_MAX_COUNT instead of dom->num_modules and it doesn't
take into account the size of the modules command line.
This is not a problem so far because the actually used amount of
memory doesn't cross a page boundary, and so no page-fault is
triggered.
Instead of fixing the size calculation done in bootlate_hvm just map
the amount of memory allocated in alloc_magic_pages_hvm.
Suggested-by: Wei Liu <wei.liu2@citrix.com>
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
.. by -drive if=none,.. -device scsi-disk,...
The use of if=scsi in QEMU is deprecated and has been removed in 2.12 by
1454509726 scsi: Remove automatic creation of SCSI controllers with -drive if=scsi
It used to create a SCSI controller, now we have to explicitly create
it in libxl. This is done ahead of disks creation in order to try to
keep the controller on the PCI slot as it used to be.
The chosen "id" for drive is the same that QEMU used to create.
This patch also take the opportunity to remove the comments in
qemu_disk_scsi_drive_string() which had a typo and is now out of date.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
HVM guest should be created with (XEN_X86_EMU_ALL &
~XEN_X86_EMU_VPCI). This is not an issue for xl/libxl because it
already sets the correct emulation flags and doesn't pass a NULL
xc_domain_configuration_t to xc_domain_create.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Commit 448c03b3cb ("tools/xenstore: try to get minimum thread
stack size for watch thread") added a dependency to libdl to
libxenstore. Unfortunately the way it was added requires now all
users of libxenstore to specify "-ldl" when linking. This can be
avoided by linking libxenstore.so specifying "-ldl" as a trailing
option. So use APPEND_LDFLAGS instead of LDFLAGS for adding the
"-ldl" option when linking libxenstore.so.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Doug Goldstein <cardoe@cardoe.com>
Tested-by: Doug Goldstein <cardoe@cardoe.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Some functions in vpci.c (vpci_remove_device and vpci_add_handlers)
are not used by the user-space test harness, so guard them with
__XEN__ in order to avoid exposing them to the user-space test
harness.
Requested-by: Jan Beulich <JBeulich@suse.com>
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Introduce a set of handlers that trap accesses to the PCI BARs and the
command register, in order to snoop BAR sizing and BAR relocation.
The command handler is used to detect changes to bit 2 (response to
memory space accesses), and maps/unmaps the BARs of the device into
the guest p2m. A rangeset is used in order to figure out which memory
to map/unmap. This makes it easier to keep track of the possible
overlaps with other BARs, and will also simplify MSI-X support, where
certain regions of a BAR might be used for the MSI-X table or PBA.
The BAR register handlers are used to detect attempts by the guest to
size or relocate the BARs.
Note that the long running BAR mapping and unmapping operations are
deferred to be performed by hvm_io_pending, so that they can be safely
preempted.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
[IO]
Reviewed-by: Paul Durrant <paul.durrant@citrix.com>
This functionality is going to reside in vpci.c (and the corresponding
vpci.h header), and should be arch-agnostic. The handlers introduced
in this patch setup the basic functionality required in order to trap
accesses to the PCI config space, and allow decoding the address and
finding the corresponding handler that should handle the access
(although no handlers are implemented).
Note that the traps to the PCI IO ports registers (0xcf8/0xcfc) are
setup inside of a x86 HVM file, since that's not shared with other
arches.
A new XEN_X86_EMU_VPCI x86 domain flag is added in order to signal Xen
whether a domain should use the newly introduced vPCI handlers, this
is only enabled for PVH Dom0 at the moment.
A very simple user-space test is also provided, so that the basic
functionality of the vPCI traps can be asserted. This has been proven
quite helpful during development, since the logic to handle partial
accesses or accesses that expand across multiple registers is not
trivial.
The handlers for the registers are added to a linked list that's keep
sorted at all times. Both the read and write handlers support accesses
that expand across multiple emulated registers and contain gaps not
emulated.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
[IO parts]
Reviewed-by: Paul Durrant <paul.durrant@citrix.com>
[ARM]
Acked-by: Julien Grall <julien.grall@arm.com>
[Tools]
Acked-by: Wei Liu <wei.liu2@citrix.com>
These don't allow LOCK, but still are read-modify-write operations, so
are better handled that way too.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Marek Marczykowski-Górecki
Andrew Cooper
Olaf Hering
John Thomson
Roger Pau Monné
Stewart Hildebrand
Anthony PERARD
Juergen Gross
Ian Jackson
Julien Grall
Boris Ostrovsky
Wei Liu
Marcello Seri
Petre Eftime
Jan Beulich
Razvan Cojocaru
Paul Durrant
Stefano Stabellini