struct xenevtchn_handle is common in private.h, meaning that xenevtchn_fd()
has exactly one correct implementation.
Implement it in core.c, rather than identically for each OS. This matches all
other libraries (call, gnttab, gntshr) which implement an fd getter.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
"make distclean" will complain that "-c" is no supported flag for make.
Fix that by using "-C".
The error has been present for a long time, but it was uncovered only
recently.
Fixes: 2400a9a365 ("tools/debugger: Allow make to recurse into debugger/")
Fixes: f9c9b12775 ("tools: fix make distclean")
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jason Andryuk <jandryuk@gmail.com>
Tested-by: Jason Andryuk <jandryuk@gmail.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
The 64-bit form forces %ecx to 0 while the 32-bit one so far didn't - it
only ended up that way when "pv_context" is zero. While presently no
leaf queried by callers has separate subleaves, let's avoid chancing it.
While there
- replace references to operands by number,
- relax constraints where possible,
- limit PUSH/POP to just the registers not also used as input,
all where applicable also for the 64-bit variant.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
The first thing XEN_SYSCTL_physinfo does is zero op->u.physinfo.
Do not copy-in. It's pointless, and most callers don't initialise their
xc_physinfo_t buffer to begin with. Remove the redundant zeroing from the
remaining callers.
Spotted by Coverity.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Wei Chen <Wei.Chen@arm.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
There's no point producing a long chain of zeroes when the previously
calculated total value was zero. To guard against mistakenly skipping
non-zero individual fields, widen "sum" to "unsigned long long".
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
do_memory_op() supplies return value and has "errno" set the usual way.
Don't overwrite "errno" with 1 (aka EPERM on at least Linux). There's
also no reason to overwrite "err".
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Bertrand Marquis <bertrand.marquis@arm.com>
This table must not have got updated in quite a while; tmem_op for
example has managed to not only appear since then, but also disappear
again (adding a name for it nevertheless, to make more obvious that
something strange is going on if the slot would ever have a non-zero
value).
Also resolve arch_0 and arch_1 to more meaningful names on x86.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Since several years now xenstored is no longer capable to run under
SunOS, as the needed libxengnttab interfaces are not available there.
Several attempts to let the SunOS maintainers address this situation
didn't change anything in this regard.
For those reasons drop SunOS support in xenstored by removing the SunOS
specific code.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Julien Grall <jgrall@amazon.com>
For one at least pci_mem_start has to be precisely 32 bits wide, so use
uint32_t for both. Otherwise expressions like "pci_mem_start <<= 1"
won't have the intended effect (in their context).
Further since its introduction pci_mem_end was never written to. Mark it
const to make this explicit.
Finally drop PCI_MEM_END: It is used just once and needlessly
disconnected from the other constant (RESERVED_MEMBASE) it needs to
match. Use RESERVED_MEMBASE as initializer of pci_mem_end instead.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
This reverts commit c22bd567ce.
While its description is correct from an abstract or real hardware pov,
the range is special inside HVM guests. The range being UC in particular
gets in the way of OVMF, which places itself at [FFE00000,FFFFFFFF].
While this is benign to epte_get_entry_emt() as long as the IOMMU isn't
enabled for a guest, it becomes a very noticable problem otherwise: It
takes about half a minute for OVMF to decompress itself into its
designated address range.
And even beyond OVMF there's no reason to have e.g. the ACPI memory
range marked UC.
Fixes: c22bd567ce ("hvmloader: PA range 0xfc000000-0xffffffff should be UC")
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
PKG_CONFIG_VARS isn't set anymore, so is dead logic.
For "local" pkg-config file, we only have one headers directory now,
"tools/include", so there is no need to specify it twice. So remove
$(CFLAGS_xeninclude) from "Cflags:".
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
With "xentoolcore_internal.h" been in LIBHEADER, it was installed. But
its dependency "_xentoolcore_list.h" wasn't installed so the header
couldn't be used anyway.
This patch also mean that the rule "headers.chk" doesn't check it
anymore as well.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
"libs" is odd and has been introduced without a reason by c7d3afbb44.
Instead, only use "all".
Also remove "build" target as "all" is more appropriate and nothing is
using "build" in libs/ in the xen.git repo.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
And use the new TARGETS to clean them. Now "clean" will remove
"vchan-socket-proxy".
$(RM) already have the "-f" flags, so remove the second one.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Add missing "xen-detect" rule. It only works without it because we
still have make's built-ins rules and variables, but fix this to not
have to rely on them.
Rename $(TARGETS_BUILD) to $(TARGETS).
Remove the unused "build" target.
Also, they are no more "build-only" targets, remove the extra code.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Avoid the need for explicite rules to recurse into debugger/* dirs by
adding a Makefile in debugger/.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
When a rule isn't a pattern rule, and thus don't have a %, the
value of the automatic variable stem $* depends on .SUFFIXES. GNU make
manual explain that it is better to avoid this "bizarre" behavior
which exist for compatibility.
Use $(basename ) instead. So we can one day avoid make's build-in
rules and variables.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
This avoid the need to generate the _paths.h header when the
information is from autoconf anyway.
They are no more users of the "buildmakevars2header" macro, so it can
be removed from "Config.mk".
Also removed the extra "-f" flag where "$(RM)" is used (xl/Makefile).
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
iasl is been check for presence by ./configure, so this Makefile
doesn't have to do it. Also start to use $(IASL) that ./configure
generate.
iasl hasn't been download by our build system for a while and the
dependency on iasl is in the main xen.git README.
Make use of $< in one rule instead of spelling the %.asl file again.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
They are no *.opic or *.so in this subdir, so no need to clean them.
The TEST* variables doesn't seems to be used anywhere, and they weren't
used by xen.git when introduced.
Both CLIENTS_* variables aren't used.
Both target "print-dir" and "print-end" only exist in this directory
and are probably not used anywhere.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Daniel P. Smith <dpsmith@apertussolutions.com>
[Drop trailing whitespace and use $(RM) consistently]
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
?= is a deferred assignment. Switch to an alternative form which lets us use
an immediate assignment.
Before, version.sh gets run anywhere between 46 and 88 times, with 50 on a
`clean`. After, between 6 and 12 times.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
The values are already available in dom->{console,xenstore}_pfn, just like on
the PV side of things. No need to ask Xen.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
This avoid the need to create the symbolic link "include/asm".
Whenever a comment refer to an "asm" headers, this patch avoid
spelling the arch when not needed to avoid some code churn.
One unrelated change is to sort entries in MAINTAINERS for "INTEL(R)
VT FOR X86 (VT-X)"
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Paul Durrant <paul@xen.org>
Acked-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Julien Grall <jgrall@amazon.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
TSXLDTRK lives in CPUID leaf 7[0].edx, not 7[0].ecx.
Bit 16 in ecx is LA57.
Fixes: a6d1b55847 ("x86emul: support X{SUS,RES}LDTRK")
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
This is specified (and asserted for in a number of places) to always be
CS. Passing this as an argument in various places is therefore
pointless. The price to pay is two simple new functions, with the
benefit of the PTWR case now gaining a more appropriate error code.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Paul Durrant <paul@xen.org>
The array of IDs is an output.
Fixes: 79647c5bc9 ("libxc: convert domctl interfaces over to hypercall buffers")
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
hvmloader's last subdir have been removed in 73b72736e6 ("acpi: Move
ACPI code to tools/libacpi"), so there is no need to use "subdirs-*"
target anymore.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
PKG_CONFIG_REMOVE doesn't do anything anymore. Commit dd33fd2e81
(tools: split libxenstore into new tools/libs/store directory) had
reintroduced it without saying why.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Those CFLAGS_* are already added in libs.mk via USELIBS_stat.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
This var was originally $(CFLAGS_$*.o), and probably was copied from
the generic %.o:%.c rules.
Nothing sets CFLAGS_libxl.o, so remove it.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
libxenutil doesn't include _paths.h so no need to generate it.
libxenctrl doesn't use macros from _paths.h so can be removed.
Fix libxenguest to include _paths.h properly instead of relying on
xc_private.h
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
The size of the video memory of PVH guests should be set to 0 in case
no value has been specified.
Doing not so will leave it to be -1, resulting in an additional 1 kB
of RAM being advertised in the memory map (here the output of a PVH
Mini-OS boot with 16 MB of RAM assigned):
Memory map:
000000000000-0000010003ff: RAM
0000feff8000-0000feffffff: Reserved
0000fc008000-0000fc00803f: ACPI
0000fc000000-0000fc000fff: ACPI
0000fc001000-0000fc007fff: ACPI
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
All *PRINTF() and *ERROR() macros are based on xc_reportv() which is
saving and restoring errno in order to not modify it. There is no need
to save and restore in those macros, too.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
The HVM parameters for pre-allocated event channels should be set in
libxenguest, like it is done for PV guests, and the ring pages that
libxenguest allocates.
Suggested-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
When using a PVH mode xenstore-stubdom the frame number of the console
should be a PFN instead of a MFN.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Xen already collects CPUID.0x80000007.edx by default, meaning that we can
refer to per-cpu data directly. This also avoids the need IPI the onlining
CPU to identify whether Core Performance Boost is available.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
OSSTest has identified a 3rd regression caused by this change. Migration
between Xen 4.15 and 4.16 on the nocera pair of machines (AMD Opteron 4133)
fails with:
xc: error: Failed to set CPUID policy: leaf 00000000, subleaf ffffffff, msr ffffffff (22 = Invalid argument): Internal error
xc: error: Restore failed (22 = Invalid argument): Internal error
which is a safety check to prevent resuming the guest when the CPUID data has
been truncated. The problem is caused by shrinking of the max policies, which
is an ABI that needs handling compatibly between different versions of Xen.
Furthermore, shrinking of the default policies also breaks things in some
cases, because certain cpuid= settings in a VM config file which used to work
will now be refused. Also external toolstacks that attempt to set the CPUID
policy from a featureset might now see some filled leaves not reachable due to
the shrinking done to the default domain policy before applying the
featureset.
This reverts commit 540d911c28, as well as the
partial fix attempt in 81da2b544c (which added
one new case where cpuid= settings might not apply correctly) and restores the
same behaviour as Xen 4.15.
Fixes: 540d911c28 ("x86/CPUID: shrink max_{,sub}leaf fields according to actual leaf contents")
Fixes: 81da2b544c ("x86/cpuid: prevent shrinking migrated policies max leaves")
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Andrew Cooper
Juergen Gross
Jan Beulich
Anthony PERARD
Ian Jackson