Report whether shadow paging is supported by the hypervisor, since it
can be disabled at build time.
Reuse and tweak LIBXL_HAVE_PHYSINFO_CAP_HAP as it hasn't appeared in a
released version of Xen yet.
Requested-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Current libxl code will always enable Hardware Assisted Paging (HAP),
expecting that the hypervisor will fallback to shadow if HAP is not
available. With the changes to DOMCTL_createdomain that's not the case
any longer, and the hypervisor will raise an error if HAP is not
available instead of silently falling back to shadow.
In order to keep the previous functionality report whether HAP is
available or not in XEN_SYSCTL_physinfo, so that the toolstack can
select a sane default if there's no explicit user selection of whether
HAP should be used.
Note that on ARM hardware HAP capability is always reported since it's
a required feature in order to run Xen.
Fixes: d0c0ba7d3d ('x86/hvm/domain: remove the 'hap_enabled' flag')
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Paul Durrant <paul.durrant@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Julien Grall <julien.grall@arm.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Christian Lindig <christian.lindig@citrix.com>
Commit fd35f32b4b ("tools/x86emul: Use struct cpuid_policy in the
userspace test harnesses") didn't account for the dependencies of
cpuid-autogen.h to potentially change between incremental builds. In
particular the harness has a "run" goal which is supposed to be usable
independently of the rest of the tools sub-tree building, and both the
harness and the fuzzer code are also supposed to be buildable
independently. Therefore a re-build of the generated header needs to be
triggered first, which is achieved by introducing a new top-level target
pattern (for just the "run" part for now).
Further cpuid.o did not have any dependencies added for it.
Finally, while at it, add a "run" target to the cpu-policy test harness.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
gcc (GCC) 4.8.5 20150623 (Red Hat 4.8.5-28) complains:
xenctrl_stubs.c: In function 'stub_xc_domain_create':
xenctrl_stubs.c:216:28: error: 'val' may be used uninitialized
in this function [-Werror=maybe-uninitialized]
cfg.arch.emulation_flags = ocaml_list_to_c_bitmap
^
xenctrl_stubs.c:198:12: error: 'val' may be used uninitialized
in this function [-Werror=maybe-uninitialized]
cfg.flags = ocaml_list_to_c_bitmap
^
cc1: all warnings being treated as errors
GCC doesn't point at the correct piece of code, but the diagnostic text is
correct, and can occur when the list is empty. Initialise val to 0.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Christian Lindig <christian.lindig@citrix.com>
Fix a broken regexp which would mention `$/' when it ought to have
mentioned `$'. The result would be that it would match lines like
type some_ocaml_type = Thing | Other_Thing
but ignore everything but the type name, giving wrong answers.
Check that we check mentioned types. Otherwise if we fail to spot
some suitable thing in the ocaml, we would just omit checking this
type !
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Andrew Cooper <Andrew.Cooper3@citrix.com>
Acked-by: Christian Lindig <christian.lindig@citrix.com>
In the generated C, add some comments saying where we found the ocaml
type. This helps with debugging. (I considered emitting #line
directives but decided this would be more confusing than helpful.)
Improve two dies.
Use better-named filehandles (perl prints thier names when it dies).
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Andrew Cooper <Andrew.Cooper3@citrix.com>
Acked-by: Christian Lindig <christian.lindig@citrix.com>
c/s f089fddd94 broke the Ocaml ABI by renumering
XEN_SYSCTL_PHYSCAP_directio without adjusting the Ocaml
physinfo_cap_flag enumeration.
Add build machinery which will check the ABI correspondence.
This will result in a compile time failure whenever constants get
renumbered/added without a compatible adjustment to the Ocaml ABI.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Christian Lindig <christian.lindig@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <Andrew.Cooper3@citrix.com>
c/s f089fddd94 broke the Ocaml ABI by renumering XEN_SYSCTL_PHYSCAP_directio
without adjusting the Ocaml physinfo_cap_flag enumeration. Fix this by
inserting CAP_PV between CAP_HVM and CAP_DirectIO.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Ian Jackson <ian.jackson@eu.citrix.com>
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
AMD Pre-Fam17h CPUs "optimise" {F,}X{SAVE,RSTOR} by not saving/restoring
FOP/FIP/FDP if an x87 exception isn't pending. This causes an information
leak, CVE-2006-1056, and worked around by several OSes, including Xen. AMD
Fam17h CPUs no longer have this leak, and advertise so in a CPUID bit.
Introduce the RSTR_FP_ERR_PTRS feature, as specified by AMD, and expose to all
guests by default. While adjusting libxl's cpuid table, add CLZERO which
looks to have been omitted previously.
Also introduce an X86_BUG bit to trigger the (F)XRSTOR workaround, and set it
on AMD hardware where RSTR_FP_ERR_PTRS is not advertised. Optimise the
conditions for the workaround paths.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Despite %.12s properly limiting the number of characters read from
ident[], gcc 9 (at least up to 9.2.0) warns about the strings not
being nul-terminated:
test-cpu-policy.c:64:18: error: '%.12s' directive argument is not a nul-terminated string [-Werror=format-overflow=]
64 | fail(" Test '%.12s', expected vendor %u, got %u\n",
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
test-cpu-policy.c:20:12: note: in definition of macro 'fail'
20 | printf(fmt, ##__VA_ARGS__); \
| ^~~
test-cpu-policy.c:64:27: note: format string is defined here
64 | fail(" Test '%.12s', expected vendor %u, got %u\n",
| ^~~~~
test-cpu-policy.c:44:7: note: referenced argument declared here
44 | } tests[] = {
| ^~~~~
The issue was reported against gcc in their bugzilla (bug 91667).
Re-order array entries, oddly enough suppressing the warning.
Reported-by: Christopher Clark <christopher.w.clark@gmail.com>
Reported-by: Dario Faggioli <dfaggioli@suse.com>
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
The patch adds a new lib xc function (xc_altp2m_get_vcpu_p2m_idx) that
uses a new hvmop (HVMOP_altp2m_get_p2m_idx) to get the active altp2m
index from a given vcpu.
Signed-off-by: Alexandru Isaila <aisaila@bitdefender.com>
Reviewed-by: George Dunlap <george.dunlap@citrix.com>
Sander reported a build failure which manifests as `make; make install`
failing with:
<snip>/cross-install -m0644 -p xen-dir/xen-shim //usr/local/lib/xen/boot/xen-shim
install: cannot stat 'xen-dir/xen-shim': No such file or directory
make[4]: *** [Makefile:52: install] Error 1
make[4]: Leaving directory '/usr/src/new/xen-unstable/tools/firmware'
It has subsequently been seen intermittently by OSSTest. This was caused by
c/s 32b1d628 triggering a preexisting linkfarm bug for partial rebuilds.
Between the first `make` and the subsequent `make install`, the linkfarm logic
observes new final build products and regenerates the linkfarm. This includes
a distclean, which throws away everything from the first `make`.
As the xen-shim rule use a symlink, the link itself remains still up-to-date
but is broken due to the distclean, which causes install to fail.
Update the linkfarm logic to not regenerate itself when build artefacts
appear. This isn't a comprehensive fix but is the best which can be done
easily. Any further effort would be better spent making out-of-tree builds
work for Xen.
Reported-by: Sander Eikelenboom <linux@eikelenboom.it>
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
In the case the while loop gets interrupted, the target musn't appear as
up-to-date. The mov $X.tmp $X must be the last action of the rule.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Just like for INVLPGA the HVM hook only supports PCID 0 for the time
being for individual address invalidation. It also translates the other
types to a full flush, which is architecturally permitted and
performance-wise presumably not much worse because emulation is slow
anyway.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Paul Durrant <paul.durrant@citrix.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
The hook is already in use for INVLPGA as well. Rename the hook and add
parameters. For the moment INVLPGA with a non-zero ASID remains
unsupported, but the TODO item gets pushed into the actual hook handler.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Paul Durrant <paul.durrant@citrix.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Rev 037 of Intel's ISA extensions document does not state intercept
behavior for the insn (I've been unofficially told that the distinction
is going to be by exit qualification, as I would have assumed
considering that this way it's sufficiently transparent to unaware
software, as using WBINVD in place of WBNOINVD is always correct, just
less efficient). Similarly AMD's PM volume 2 version 3.31 only states
that both use the same VMEXIT, but not how to distinugish them (other
than by decoding the insn). Therefore in the HVM case for now it'll be
backed by the same ->wbinvd_intercept() handlers.
Use this occasion and also add the two missing table entries for
CLDEMOTE, which doesn't require any further changes to make work.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Paul Durrant <paul.durrant@citrix.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
The hook is already in use for other purposes, and emulating e.g.
CLFLUSH by issuing WBINVD is, well, not very nice. Rename the hook and
add parameters. Use lighter weight flushing insns when possible in
hvmemul_cache_op().
hvmemul_cache_op() treating x86emul_invd the same as x86emul_wbinvd is
to retain original behavior, but I'm not sure this is what we want in
the long run.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Paul Durrant <paul.durrant@citrix.com>
This functionality is obsolete. It was introduced by c/s 41296317a3 into
Xend, but was never exposed in libxl.
Nothing limits this to PV guests, but it makes no sense for HVM guests.
Looking through the XenServer templates, this was used to work around bugs in
the 32bit RHEL/CentOS 4.7 and 4.8 kernels (fixed in 4.9) and RHEL/CentOS/OEL
5.2 and 5.3 kernels (fixed in 5.4). RHEL 4 as a major version went out of
support in 2017, whereas the 5.2/5.3 kernels went out of support when 5.4 was
released in 2009.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Acked-by: Christian Lindig <christian.lindig@citrix.com>
Acked-by: Wei Liu <wl@xen.org>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
This functionality is obsolete. It was introduced by c/s 39407bed9c into
Xend, but never exposed in libxl.
While not explicitly limited to PV guests, this is PV-only by virtue of its
position in the pagefault handler.
Looking though the XenServer templates, this was used to work around bugs in
the 32bit RHEL/CentOS 4.{5..7} kernels (fixed in 4.8). RHEL 4 as a major
version when out if support in 2017.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Acked-by: Wei Liu <wl@xen.org>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
C version of xenstored had this ability since 61aaed0d5 ("Allow
XS_INTRODUCE to be used for rebinding the xenstore evtchn.") from 2007.
Copy it as is to Ocaml version.
Signed-off-by: Igor Druzhinin <igor.druzhinin@citrix.com>
Acked-by: Christian Lindig <christian.lindig@citrix.com>
match_watch_by_token() when returns an error, sets also exception within
python. This is generally the right thing to do, but when
xspy_read_watch() handle EAGAIN error internally, the exception needs to
be cleared. Otherwise it will fail like this:
xen.lowlevel.xs.Error: (11, 'Resource temporarily unavailable')
The above exception was the direct cause of the following exception:
Traceback (most recent call last):
(...)
result = self.handle.read_watch()
SystemError: <method 'read_watch' of 'xen.lowlevel.xs.xs' objects> returned a result with an error set
Fixes f6e1023412 "python: Extract registered watch search logic from xspy_read_watch()"
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Acked-by: Wei Liu <wl@xen.org>
Extend the list of xc() object methods with additional one to display
Xen's buildid. The implementation follows the libxl implementation
(e.g. max buildid size assumption being XC_PAGE_SIZE minus
sizeof(buildid->len)).
Signed-off-by: Pawel Wieczorkiewicz <wipawel@amazon.de>
Reviewed-by: Martin Mazein <amazein@amazon.de>
Reviewed-by: Andra-Irina Paraschiv <andraprs@amazon.com>
Reviewed-by: Norbert Manthey <nmanthey@amazon.de>
Acked-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
In Grub2ConfigFile the code to handle ${saved_entry} and ${next_entry}
sets arg = "0" but this now does nothing following c/s d1b93ea261
"tools/pygrub: Make pygrub understand default entry in string format"
which replaced arg.strip() with arg_strip in the following line. This
patch restores the previous behaviour.
Signed-off-by: Michael Young <m.a.young@durham.ac.uk>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Building with GCC 8.3 on Buster identifies:
src/xenstat_linux.c: In function 'xenstat_collect_networks':
src/xenstat_linux.c:307:32: warning: 'snprintf' output may be truncated before
the last format character [-Wformat-truncation=]
snprintf(devNoBridge, 16, "p%s", devBridge);
^
src/xenstat_linux.c:307:2: note: 'snprintf' output between 2 and 17 bytes into
a destination of size 16
snprintf(devNoBridge, 16, "p%s", devBridge);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
devNoBridge[] needs one charater more than devBridge[], so allocate one byte
more. Replace a raw 16 in the snprintf() call with a sizeof() expression
instead.
Finally, libxenstat, unlike most of the rest of the Xen, doesn't use -Werror
which is why this issue went unnoticed in CI. Fix this.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Wei Liu <wl@xen.org>
When compiling xenstat with -Werror, Clang complains:
src/xenstat.c:134:34: error: unused function 'parse' [-Werror,-Wunused-function]
static inline unsigned long long parse(char *s, char *match)
^
1 error generated.
Drop the function. It really is unused.
Spotted by Travis-CI.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Wei Liu <wl@xen.org>
Specifically:
xen/lowlevel/xc/xc.c: In function ‘pyxc_domain_create’:
xen/lowlevel/xc/xc.c:147:24: error: comparison of integer expressions of different signedness: ‘int’ and ‘long unsigned int’ [-Werror=sign-compare]
147 | for ( i = 0; i < sizeof(xen_domain_handle_t); i++ )
| ^
xen/lowlevel/xc/xc.c: In function ‘pyxc_domain_sethandle’:
xen/lowlevel/xc/xc.c:312:20: error: comparison of integer expressions of different signedness: ‘int’ and ‘long unsigned int’ [-Werror=sign-compare]
312 | for ( i = 0; i < sizeof(xen_domain_handle_t); i++ )
| ^
xen/lowlevel/xc/xc.c: In function ‘pyxc_domain_getinfo’:
xen/lowlevel/xc/xc.c:391:24: error: comparison of integer expressions of different signedness: ‘int’ and ‘long unsigned int’ [-Werror=sign-compare]
391 | for ( j = 0; j < sizeof(xen_domain_handle_t); j++ )
| ^
xen/lowlevel/xc/xc.c: In function ‘pyxc_get_device_group’:
xen/lowlevel/xc/xc.c:677:20: error: comparison of integer expressions of different signedness: ‘int’ and ‘uint32_t’ {aka ‘unsigned int’} [-Werror=sign-compare]
677 | for ( i = 0; i < num_sdevs; i++ )
| ^
xen/lowlevel/xc/xc.c: In function ‘pyxc_physinfo’:
xen/lowlevel/xc/xc.c:988:20: error: comparison of integer expressions of different signedness: ‘int’ and ‘long unsigned int’ [-Werror=sign-compare]
988 | for ( i = 0; i < sizeof(pinfo.hw_cap)/4; i++ )
| ^
xen/lowlevel/xc/xc.c:994:20: error: comparison of integer expressions of different signedness: ‘int’ and ‘long unsigned int’ [-Werror=sign-compare]
994 | for ( i = 0; i < ARRAY_SIZE(virtcaps_bits); i++ )
| ^
xen/lowlevel/xc/xc.c:998:24: error: comparison of integer expressions of different signedness: ‘int’ and ‘long unsigned int’ [-Werror=sign-compare]
998 | for ( i = 0; i < ARRAY_SIZE(virtcaps_bits); i++ )
| ^
xen/lowlevel/xs/xs.c: In function ‘xspy_ls’:
xen/lowlevel/xs/xs.c:191:23: error: comparison of integer expressions of different signedness: ‘int’ and ‘unsigned int’ [-Werror=sign-compare]
191 | for (i = 0; i < xsval_n; i++)
| ^
xen/lowlevel/xs/xs.c: In function ‘xspy_get_permissions’:
xen/lowlevel/xs/xs.c:297:23: error: comparison of integer expressions of different signedness: ‘int’ and ‘unsigned int’ [-Werror=sign-compare]
297 | for (i = 0; i < perms_n; i++) {
| ^
cc1: all warnings being treated as errors
Use size_t for loop iterators where it's compared with sizeof() or
similar construct.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Add 9pfs to the kind of PV drivers that has a QEMU backend, specifically
to the macro QEMU_BACKEND.
This is needed otherwise upon domain destroy we get a timeout error:
libxl: error: libxl_device.c:1132:device_backend_callback: Domain 1:unable to remove device with path /local/domain/0/backend/9pfs/1/0
libxl: error: libxl_domain.c:1129:devices_destroy_cb: Domain 1:libxl__devices_destroy failed
This change should have been part of b53b4037ce "libxl/xl: add support
for Xen 9pfs".
Also add a comment in libxl_types_internal.idl to help remember changing
QEMU_BACKEND going forward.
Signed-off-by: Stefano Stabellini <stefanos@xilinx.com>
This causes objdump to disassemble them, rather than rendering them as
straight hex data.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Unfortunately, a parallel build from clean can fail in the following manner:
xen.git$ make -j4 -C tools/firmware/xen-dir/
make: Entering directory '/local/xen.git/tools/firmware/xen-dir'
mkdir -p xen-root
make: *** No rule to make target 'xen-root/xen/arch/x86/configs/pvshim_defconfig', needed by 'xen-root/xen/.config'. Stop.
make: *** Waiting for unfinished jobs....
The rule for pvshim_defconfig needs to depend on the linkfarm, rather than
$(D)/xen/.config specifically.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
* Add a dependency so the shim gets rebuilt when pvshim_defconfig changes.
* Default to the NULL scheduler now that it works with vcpu online/offline.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
On Arm64, system registers are always 64-bit including SCTLR_EL1.
However, Xen is assuming this is 32-bit because earlier revision of
Armv8 had the top 32-bit RES0 (see ARM DDI0595.b).
>From Armv8.5, some bits in [63:32] will be defined and allowed to be
modified by the guest. So we would effectively reset those bits to 0
after each context switch. This means the guest may not function
correctly afterwards.
Rather than resetting to 0 the bits [63:32], preserve them across
context switch.
Note that the corresponding register on Arm32 (i.e SCTLR) is always
32-bit. So we need to use register_t anywhere we deal the SCTLR{,_EL1}.
Outside interface is switched to use 64-bit to allow ABI compatibility
between 32-bit and 64-bit.
[Stefano: fix typo in commit message]
Signed-off-by: Julien Grall <julien.grall@arm.com>
Signed-off-by: Stefano Stabellini <stefanos@xilinx.com>
Reviewed-by: Volodymyr Babchuk <volodymyr.babchuk@epam.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Building with GCC9 (on openSUSE Tubmleweed) generates a lot of errors of
the "taking address of packed member of ... may result in an unaligned
pointer value" kind.
Updating to upstream commit 1dd56dbd11082 ("[build] Workaround compilation
error with gcc 9.1") seems to fix the problem.
For more info, see:
https://git.ipxe.org/ipxe.git/commit/1dd56dbd11082fb622c2ed21cfaced4f47d798a6
Signed-off-by: Dario Faggioli <dfaggioli@suse.com>
Acked-by: Wei Liu <wl@xen.org>
Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Make handling in do_pm_op() more homogeneous: Before interpreting
op->cpuid as such, handle all operations not acting on a particular
CPU. Also expose the setting via xenpm.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
While the MWAIT idle driver already takes it to mean an actual C state,
the ACPI idle driver so far used it as a list index. The list index,
however, is an implementation detail of Xen and affected by firmware
settings (i.e. not necessarily uniform for a particular system).
While touching this code also avoid invoking menu_get_trace_data()
when tracing is not active. For consistency do this also for the
MWAIT driver.
Note that I'm intentionally not adding any sorting logic to set_cx():
Before and after this patch we assume entries to arrive in order, so
this would be an orthogonal change.
Take the opportunity and add minimal documentation for the command line
option.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
To remove a device from a domain, a qmp command is sent to qemu. But it is
handled by qemu asychronously. Even the qmp command is claimed to be done,
the actual handling in qemu side may happen later.
This behavior brings two questions:
1. Attaching a device back to a domain right after detaching the device from
that domain would fail with error:
libxl: error: libxl_qmp.c:341:qmp_handle_error_response: Domain 1:received an
error message from QMP server: Duplicate ID 'pci-pt-60_00.0' for device
2. Accesses to PCI configuration space in Qemu may overlap with later device
reset issued by 'xl' or by pciback.
In order to avoid mentioned questions, wait for the completion of device
removal by querying all pci devices using qmp command and ensuring the target
device isn't listed. Only retry 5 times to avoid 'xl' potentially being blocked
by qemu.
Signed-off-by: Chao Gao <chao.gao@intel.com>
Message-Id: <1562133373-19208-1-git-send-email-chao.gao@intel.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
This deals with two casting issues for compiling under go 1.11:
- explicitly cast to *C.xentoollog_logger for Ctx.logger pointer
- add cast to unsafe.Pointer for the C string cpath
Signed-off-by: Daniel P. Smith <dpsmith@apertussolutions.com>
Reviewed-by: George Dunlap <george.dunlap@citrix.com>
Also use this for AVX512_VBMI2 VPSH{L,R}D{,V}{D,Q,W} testing (only the
quad word right shifts get actually used; the assumption is that their
"left" counterparts as well as the double word and word forms then work
as well).
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Andrew Cooper <andrew.cooper3@citirx.com>
Also use this for AVX512VL VPRO{L,R}{,V}D as well as some further shifts
testing.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Roger Pau Monne
Ian Jackson
Jan Beulich
Andrew Cooper
Alexandru Stefan ISAILA
Igor Druzhinin
Marek Marczykowski-Górecki
Pawel Wieczorkiewicz
Michael Young
Stefano Stabellini
Chao Gao
Julien Grall
Dario Faggioli
Zhang Chen
Ross Lagerwall
Daniel P. Smith