The original rule to target "distclean" in tools/Rules.mk was in effect
"make clean". It should be "make distclean".
However not all Makefiles in subdirectories have distclean target
defined. So this patch also adds a bunch of distclean targets to various
Makefiles. They only depend on clean target and don't have any actions
in most cases.
With the patch applied, following command outputs 0 results:
find tools -name 'Makefile*' -exec grep -L 'distclean' {} \+ \
| grep -v ocaml | grep -v libfsimage
Ocaml and libfsimage are known to have distclean defined in a dedicated
rules file.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Without this gdb does not report an error.
With this patch and using a 1G hvm domU:
(gdb) x/1xh 0x6ae9168b
0x6ae9168b: Cannot access memory at address 0x6ae9168b
Drop output of iop->remain because it most likely will be zero.
This leads to a strange message:
ERROR: failed to read 0 bytes. errno:14 rc:-1
Add address to write error because it may be the only message
displayed.
Note: currently XEN_DOMCTL_gdbsx_guestmemio does not change 'iop' on
error and so iop->remain will be zero.
Signed-off-by: Don Slutz <dslutz@verizon.com>
Acked-by: Mukesh Rathor <mukesh.rathor@oracle.com>
I had coded this with XGERR, but gdb will try to read memory without
a direct request from the user. So the error message can be confusing.
Signed-off-by: Don Slutz <dslutz@verizon.com>
Acked-by: Mukesh Rathor <mukesh.rathor@oracle.com>
g->id is an array and is allocated as part of g itself; it's not a
separate allocation.
Coverity-ID: 1054980
Signed-off-by: Matthew Daley <mattjd@gmail.com>
Acked-by: Tim Deegan <tim@xen.org>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
gcc 4.8 identifies several places where code of the form memset(x, 0,
sizeof(x)); is used incorrectly, meaning that less memory is set to
zero than required.
Signed-off-by: Michael Young <m.a.young@durham.ac.uk>
Committed-by: Keir Fraser <keir@xen.org>
Removed support from libxc and mini-os.
This also took me under xen/include/public via various symlinks.
Dropped tools/debugger/xenitp entirely, it was described upon commit
as:
"Xenitp is a low-level debugger for ia64" and doesn't appear to be
linked into the build anywhere.
99 files changed, 14 insertions(+), 32361 deletions(-)
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Keir Fraser <keir@xen.org>
Committed-by: Ian Campbell <ian.campbell@citrix.com>
Added autotools magic to replace custom check scripts. The previous
checks have been ported to autoconf, and some additional ones have
been added (plus the suggestions from running autoscan). Two files are
created as a result from executing configure script, config/Tools.mk
and config.h.
conf/Tools.mk is included by tools/Rules.mk, and contains most of the
options previously defined in .config, that can now be set passing
parameters or defining environment variables when executing configure
script.
config.h is only used by libxl/xl to detect yajl_version.h.
[ tools/config.sub and config.guess copied from
autotools-dev 20100122.1 from Debian squeeze i386,
which is GPLv2.
tools/configure generated using the included ./autogen.sh
which ran autoconf 2.67-2 from Debian squeeze i386. autoconf
is GPLv3+ but has a special exception for the autoconf output;
this exception applies to us and exempts us from complying
with GPLv3+ for configure, which is good as Xen is GPL2 only.
- Ian Jackson ]
Signed-off-by: Roger Pau Monne <roger.pau@entel.upc.edu>
Tested-by: Ian Jackson <ian.jackson@eu.citrix.com>
Committed-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
It's not needed unless you are including headers in the current
directory _and_ you can't use "" instead of <> because the headers are
to be installed.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
Several places include it in CFLAGS even though it is never defined. A
few others use it as nothing more than a gathering point for
CFLAGS. Get rid of it.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
Otherwise make can search the path relative to certain standard paths
such as /usr/include (e.g., the line '-include $(XEN_ROOT)/.config' in
Config.mk suffers from this).
Signed-off-by: Keir Fraser <keir@xen.org>
Not checking leads to warn_unused_result checks triggering in some
libraries and compilers. Combined with -Werror this breaks the build.
Signed-off-by: Gianni Tedesco <gianni.tedesco@citrix.com>
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
gdbsx hacks CFLAGS to remove optimisations for easier debugging, however
this breaks dep generation due to an early evaluation of CFLAGS and
leaves stale files called "..d" after a make clean. We could possibly
fix this by separating dep generation from the rest of CFLAGS but it
seems a little invasive. The gdbsx hackers can do their own thing during
development and testing anyway...
Signed-off-by: Gianni Tedesco <gianni.tedesco@citrix.com>
kdd runs in dom0, attaches to a domain and speaks the Windows kd serial
protocol over a TCP connection (which should go to kd or windbg, e.g.
by having another VM with its virtual COM1 set up as a TCP listener).
It doesn't do breakpoints &c yet, and windbg can get quite confused
since the kernel debugger's not actually running, but it's good enough
to extract backtraces from wedged VMs.
Signed-off-by: Tim Deegan <Tim.Deegan@citrix.com>
The attached patch first tries the MTF flag for HVM guest
single step, reverting to manually setting the TF flag if MTF fails.
Tested on 4.0.1. Compile tested on unstable.
Signed-off-by: mukesh.rathor@oracle.com
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Linker command lines are order-sensitive.
Move linker options -Lfoo -lfoo from LDFLAGS to LDLIBS and place this new
variable after the objects to link. This resolves build errors in xenpagin
and blktap with recent toolchains.
rename SHLIB_CFLAGS to SHLIB_LDFLAGS
rename LDFLAGS_* to LDLIBS_*
move LDFLAGS usage after CFLAGS in CC calls
remove stale comments in xenpaging Makefile
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Newer version of gdb, version 7*, seems to have bug where it is not
parsing thread list from gdbsx properly. Getting rid of the space in
thread list works around it. It's ok with older gdb also.
Signed-off-by: Mukesh Rathor <mukesh.rathor@oracle.com>
This patch eliminate the global variables in libxenctrl (used for
logging and error reporting).
Instead the information which was in the global variables is now in a
new xc_interface* opaque structure, which xc_interface open returns
instead of the raw file descriptor; furthermore, logging is done via
xentoollog.
There are three new parameters to xc_interface_open to control the
logging, but existing callers can just pass "0" for all three to get
the old behaviour.
All libxc callers have been adjusted accordingly.
Also update QEMU_TAG for corresponding qemu change.
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
It should be run on dom0 on gdbsx enabled hypervisor. For details,
please see tools/debugger/gdbsx/README
Signed-off-by: Mukesh Rathor <mukesh.rathor@oracle.com>
Signed-off-by: Keir Fraser <keir.fraser@citrix.com>
Since the shared info layout is fixed, guests are required to use
VCPUOP_register_vcpu_info prior to booting any vCPU beyond the
traditional limit of 32.
MAX_VIRT_CPUS, being an implemetation detail of the hypervisor, is no
longer being exposed in the public headers.
The tools changes are clearly incomplete (and done only so things
would
build again), and the current state of the tools (using scalar
variables all over the place to represent vCPU bitmaps) very likely
doesn't permit booting DomU-s with more than the traditional number of
vCPU-s. Testing of the extended functionality was done with Dom0 (96
vCPU-s, as well as 128 vCPU-s out of which the kernel elected - by way
of a simple kernel side patch - to use only some, resulting in a
sparse
bitmap).
ia64 changes only to make things build, and build-tested only (and the
tools part only as far as the build would go without encountering
unrelated problems in the blktap code).
Signed-off-by: Jan Beulich <jbeulich@novell.com>
Add auto-repeat feature
(Just press enter to re-execute the last go/sstep/cb/disass command).
Do not flush stdout in the signal handler.
Single step over a breakpoint.
Can quit with domain paused (quit paused)
'disp db' now displays watchpoint.
Signed-off-by: Tristan Gingold <tgingold@free.fr>
Remove all the casts by using char * instead of unsigned char *.
The go command now accept a number.
The disass command can now accept a range.
Number of TRs is not hard-coded.
'-' (minus) can now be used in expressions.
'$iip' and '$b0' can be used in expressions.
Signed-off-by: Tristan Gingold <tgingold@free.fr>
Wei Liu