The original rule to target "distclean" in tools/Rules.mk was in effect
"make clean". It should be "make distclean".
However not all Makefiles in subdirectories have distclean target
defined. So this patch also adds a bunch of distclean targets to various
Makefiles. They only depend on clean target and don't have any actions
in most cases.
With the patch applied, following command outputs 0 results:
find tools -name 'Makefile*' -exec grep -L 'distclean' {} \+ \
| grep -v ocaml | grep -v libfsimage
Ocaml and libfsimage are known to have distclean defined in a dedicated
rules file.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
This was disabled by default in Xen 4.4. Since xend has now been
removed from the tree I don't believe anything is using it.
We need to pass an explicit CONFIG_BLKTAP1=n to qemu-xen-traditional
otherwise it defaults to y and doesn't build.
This patch does all the ground work, the tools/blktap directory will
be removed in the next (*huge*) patch.
Note that this has no impact on blktap2, which is what libxl supports.
blktap1 was only usable via xend which has already been removed.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
The "install" rules depends on both "all" and "subdirs-install" and
"all" depends on "subdirs-all". This leads the "install" rules to call
both "subdirs-all" and "subdirs-install" which create a race with two
concurrent `make` within the same directory (systemd) trying to make the
same things (xen.conf) and failing.
Ultimatly, "install" should only depend on the things it needs to
install, and not on "all".
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Tested-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
This replaces config/Linux.modules with a configure option. As a result
of this change only a single xencomons.in is required, instead of a
xencomons.in.in and sed hackery.
After this change blktap2 and blktap will be loaded at the same time.
This is already done in out-of-tree xencommons scripts, and systemd will
load both modules as well. No harm is expected by loading both modules.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Cc: Wei Liu <wei.liu2@citrix.com>
[ ijc -- ran autogen.sh as requested ]
The current usage of LIBEXEC is bogus. It describes the directory for
private xen executables. Other places create their own, similar
libexecdir path as $prefix/lib/xen/*.
Additional two other variables are used to describe similar paths:
PRIVATE_BINDIR and PRIVATE_PREFIX
The autoconf documentation refers to libexec as a directory for
executables and stuff which is called by other programs, not by the
user.
Adjust all places that want libexecdir as a target path. LIBEXEC refers
now to the base directory. Three convenience variables are used to refer
to paths to private binaries, libs and include files.
In the systemd files LIBEXEC_BIN is substituted, so this variable has to
be present in autoconf. All other variables are expanded in Paths.mk
because they are only used in Makefiles.
Most users of LIBEXEC are updated to use LIBEXEC_BIN because that is
what they want.
Users of PRIVATE_BINDIR are updated to use LIBEXEC_BIN because that is
what they want. PRIVATE_BINDIR and PRIVATE_PREFIX usage is removed by
this patch, in favour of LIBXEC_BIN and LIBEXEC
An internal libxl function was removed. A single helper to retrieve
LIBEXEC_BIN remains.
As suggested by the autoconf documentation, configure appends the
package name to LIBEXEC to make sure the provided directory really
refers to xen. This makes sure "make uninstall" preserves the real
libexecdir.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Cc: George Dunlap <george.dunlap@eu.citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Cc: Samuel Thibault <samuel.thibault@ens-lyon.org>
Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Cc: Wei Liu <wei.liu2@citrix.com>
[ ijc -- ran autogen.sh as requested, updated QEMU_TRADITIONAL_REVISION to
pickup version which uses LIBEXEC_BIN ]
This patch adds the machinery required for protecting a guest's
disk state, when the guest disk uses a DRBD disk backend.
This patch comprises of two parts:
1. Hotplug scripts: The block-drbd-probe script is responsible for
performing sanity checks on the state of the DRBD disk before the
checkpointing process begins. This script should be invoked by
libxl for each of the guest's disk devices, when starting Remus.
2. Remus drbd disk device: Implements the interfaces required by the
remus abstract device layer. A note about the implementation:
a) setup() is called for each disk attached to the guest.
During setup():
i) The hotplug script is called to perform the sanity check.
ii) Libxl obtains a handle to the DRBD device (/dev/drbd*) and
and subsequently controls disk checkpoint replication using
this handle in the checkpoint callbacks.
c) The preresume() checkpoint callback is executed asynchronously
using libxl__ev_child_fork(), as it may potentially block for more
than few seconds in case of backup failure.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Yang Hongyang <yanghy@cn.fujitsu.com>
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Signed-off-by: Shriram Rajagopalan <rshriram@cs.ubc.ca>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
This patch adds the machinery required for protecting a guest's
network device state. This patch comprises of two parts:
1. Hotplug scripts: The remus-netbuf-setup script is responsible for
setting up and tearing down the necessary infrastructure required for
network output buffering. This script should be invoked by libxl for
each of the guest's network interfaces, when starting or stopping Remus.
Apart from returning success/failure indication via the usual hotplug
entries in xenstore, this script also writes to xenstore, the name of
the REMUS_IFB device to be used to control the vif's network output.
The script relies on libnl3 command line utilities to perform various
setup/teardown functions. The script is confined to Linux platforms only
since NetBSD does not seem to have libnl3.
2. Remus network device: Implements the interfaces required by the
remus abstract device layer. A note about the implementation:
a) init_subkind_nic() & cleanup_subkind_nic() are called once per Remus
invocation. They establish and free netlink related state respectively.
b) setup() and teardown are called for each vif attached to the
guest.
During setup():
i) The hotplug script is called to setup a network buffer on a
given vif. The script chooses an available IFB device from
the system, redirects vif egress traffic to the IFB device
and sets up the plug qdisc (output buffer) on the IFB device.
The name of the IFB device is communicated via xenstore to
libxl.
ii) Libxl obtains a handle to the plug qdisc using the libnl3 API
and subsequently controls output buffering using this handle
in the checkpoint callbacks.
During teardown(), the hotplug scripts are called again to remove
the vif->ifb traffic redirection, release the ifb and the plug
qdisc associated with it.
c) The checkpoint callbacks [postsuspend(), preresume() and commit()]
are implemented as synchronous ops as the netlink calls associated
with the qdisc subsystem are very fast.
Signed-off-by: Shriram Rajagopalan <rshriram@cs.ubc.ca>
Signed-off-by: Yang Hongyang <yanghy@cn.fujitsu.com>
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
This adds the systemd xen service / module files and integrates
support into the build system.
This goes in with AX_AVAILABLE_SYSTEMD() which will enable
systemd if development libraries have been found on your
build system. If you don't have systemd on target systems
for binaries built with systemd then the binary will not
work, you must explicitly disable systemd support if you
do not want to build systemd support.
When systemd libraries are present only systems that
have booted into systemd go through the systemd initialization,
otherwise the SysVinit is used.
These are originally based on the Fedora systemd files.
Changes made from Fedora's systemd files:
* split sockets into two files to claim different permissions
* Use /bin/sh -c exec to for a simple launcher implementation
* enables systemd socket activation for C xenstored and Ocaml
oxenstored
* use sd_notify(), so change the service to Type=notify, because of
this we remove the PIDFile specification as we don't care for it, and let
systemd do its magic for us, this also means we don't have to fork
so we use --no-fork with systemd
* defines a modules-load.d, its original source file will be shared
between systemd and old init systems
* simplify service files with ConditionVirtualization=xen which uses
the built in systemd virtualization backend detection, these
service files will not be available to start on systems that do not
boot with xen as a hypervisor
* use autoconf to replace @variable@ paths for us which piggy
backs on top of the latest autoconf changes to xen
* removes oxenstored service file in favor of a system variable which
controls which which xentored to use at run time, we avoid multiple
service files this way.
* simplifies startup to not require polling on the sockets
as initial socket management is handled by systemd, we just
take on the socket later once anything pokes at it, a simple nc -U
(as root) on any of the sockets files can activate the service for example.
Anything queued up will be sent to us once we start. Socket activation
should in theory also let us dynamically switch between xenstores but more
importantly we could upgrade xenstored while keeping all active
socket communication queued up, but in order to take advantage of
this we eventually would need to remove the requirement of not being
able to bring down the xenstored. Even though active sockets are
supported since most libxl communication doesn't triggger a check
on the unix socket first administrators are encouraged to enable
the xenstored.service to triggger an initialization of the xenstored
upon bring up. Some systems also never use unix sockets for
communication with the xenstored and as such active sockets will
not be used there.
* allow for xenstored configuration through *either* of these
configuration files:
- /etc/sysconfig/xenstored
- /etc/default/xenstored
The /etc/default/xenstored will let debian based systems do
the same, while SUSE/OpenSUSE/Fedora/RedHat can keep on chugging
with sysconfig. We leave these files all commented out by default
though given that for systemd we want to encourage not using them.
* ensures we create the run directory as most systems will likely
be using a tmpfs for run dirs for the pid files
* Some systems define the selinux context in the systemd Option for the
/var/lib/xenstored tmpfs:
Options=mode=755,context="system_u:object_r:xenstored_var_lib_t:s0"
For the upstream version we remove that and let systems specify the
context on their system /etc/default/xenstored or /etc/sysconfig/xenstored
$XENSTORED_MOUNT_CTX variable, with a default to none.
* takes advantage of the shared xendomains helper for the xendomains
service
* Add the new dom0 that gets kicked off for disk backend access into
its own systemd service associated to xen
We end up with these systemd files:
General requirements:
* proc-xen.mount
* var-lib-xenstored.mount
xenstored:
* xenstored.service
* xenstored.socket
* xenstored_ro.socket
* xenconsoled.service
* xen-qemu-dom0-disk-backend.service.in
Optional:
* xendomains.service
* xen-watchdog.service
As for integration with xen, we house keep all the systemd files
under a new directory tools/hotplug/Linux/systemd/ and will be targeted
by default when building on Linux systems if systemd development
libraries are present at build time.
The systemd files will be sanitized for meta @VARIABLES@ upon
configuration and installed upon the install target. Systems that
do not use systemd can still get systemd service unit files installed
if the build system enabled systemd support, this however does not
mandate a requirement of having systemd libraries present. Old init
scripts are always installed.
If you don't specify a prefix you will end up with the services
files under /usr/local/lib/systemd/system/ by default, and systemd
modules-load.d conf files under /usr/local/lib/modules-load.d/ which
systemd does look for (although it seems this is not documented).
Distributions are expected to provide their /usr/ prefix to end up in
the more generic location upon distribution install at
/usr/lib/systemd/system/ and /usr/lib/modules-load.d/ respectively.
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Jan Rękorajski <baggins@pld-linux.org>
Cc: M A Young <m.a.young@durham.ac.uk>
Cc: Jacek Konieczny <jajcus@jajcus.net>
Cc: xen-devel@lists.xenproject.org
Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
[ ijc -- ran autogen.sh ]
This will allow us to share the same module list with
systemd, and lets us upkeep it in one place. Document this
while at it on the top level README and expand on the wiki:
http://wiki.xen.org/wiki/Category:Host_Configuration#Kernel_modules
In order to upkeep parallelism builds be explicit about the
requirement to complete all actions before any installation
targets.
Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
I've retained xen.lowlevel.{xc,xs} since they seem more widely useful. I also
kept xen.lowlevel.xl even though it is disabled by default and IMHO useless in
its current form.
I've tried to clean up the various associated bits like example configs, init
scripts, udev rules etc but no doubt I have missed something, those can easily
be cleaned up later.
I've also removed xm-test since although it could in theory be reworked to
test xl it hasn't been touched for years. If someone wants to resurrect it
then they could do so via the git history.
This has been built but not runtime tested.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
---
v2: Clean out some .*ignore cruft
Remove some xm/xend docs.
I don't think there are any dom0's around whose kernels support only blktap1
and not something newer like blktap2 or qdisk. Certainly not that you would
want to run Xen 4.4 on.
libxl will never use blktap1.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
xend has been deprecated for 2 releases now. Lets make it possible to not even
build it.
For now I'm leaving the default of on but I would like to change that before
the 4.4 release.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Matt Wilson <msw@amazon.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
This hotplug script has been tested with IET and NetBSD iSCSI targets,
without authentication.
This hotplug script will only work with PV guests not using pygrub.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Based on Waldi's RFC at
http://lists.xen.org/archives/html/xen-devel/2012-09/msg00943.html
To use it set vif.default.script="vif-openvswitch" in /etc/xen/xl.conf or use
script=vif-openvswitch in the vif configuration.
Appears to do the right thing for PV and HVM guests (including tap devices)
and with stubdomains.
In order to support VLAN tagging and trunking the "bridge" specified in the
configuration can have a special syntax, that is:
BRIDGE_NAME[.VLAN][:TRUNK:TRUNK]
e.g.
- xenbr0.99
add the VIF to VLAN99 on xenbr0
- xenbr0:99:100:101
add the VIF to xenbr0 as a trunk port receiving VLANs 99, 100 & 101
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Bastian Blank <waldi@debian.org>
Acked-by: Roger Pau Monné <roger.pau@citrix.com>
Cc: dev@openvswitch.org
rpmlint complains about wrong permissions of config files:
[ 455s] xen-tools.i586: W: script-without-shebang /var/adm/fillup-templates/sysconfig.xendomains
[ 455s] xen-tools.i586: W: script-without-shebang /var/adm/fillup-templates/sysconfig.xencommons
[ 455s] This text file has executable bits set or is located in a path dedicated for
[ 455s] executables, but lacks a shebang and cannot thus be executed. If the file is
[ 455s] meant to be an executable script, add the shebang, otherwise remove the
[ 455s] executable bits or move the file elsewhere.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Ian Campbell <ian.campbell@citrix.com>
Hotplug has been replaced by udev since several years. Remove the
hotplug related files and install udev unconditionally.
This makes it possible to remove udev from rpm BuildRequires which
reduces the buildtime dependency chain. For openSuSE:Factory it was
done just now:
http://lists.opensuse.org/opensuse-buildservice/2012-10/msg00085.html
The patch by itself will have no practical impact unless someone
attempts to build and run a Xen dom0 on a really old base system. e.g.
circa SLES9/2007 or earlier
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Ian Campbell <ian.campbell@citrix.com>
Otherwise make can search the path relative to certain standard paths
such as /usr/include (e.g., the line '-include $(XEN_ROOT)/.config' in
Config.mk suffers from this).
Signed-off-by: Keir Fraser <keir@xen.org>
Introduce CONFIG_LEAF_DIR, SUBSYS_DIR, INITD_DIR variables to cope
better with variation between distributions.
See docs/misc/distro_mapping.txt for details.
Signed-off-by: Bruce Edge <bruce.edge@gmail.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Install rules straight into /etc/udev/rules.d
udev version 029 since mid 2004 uses this directory already.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
On SuSE the configuration files in /etc/sysconfig/ will be updated in
a smart way from templates found in /var/adm/fillup-templates/
Introduce new variable SYSCONFIG_DIR for Linux installations. Now
only one place needs patching, or it can be specified as option to
make(1).
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
Now the init script is called xencommons and, as the name suggests, it
is a common script between xl and xend because it is used to start
xenconsoled, xenstored and xenbackendd and the initialization of these
three daemons has been removed from xend. The global
xen_toolstack=xl/xend variable has been removed. Regarding the
network setup, I made the vif scripts follow the same pattern as the
other scripts in xen-backend: a new script called vif-setup is
executed unconditionally. vif-setup is going to do the right thing
depending on the value of the environmental variable "script" (same
technique used before), defaulting to vif-bridge. In the common
scenario the toolstack doesn't need to set the variable "script"
because vif-bridge is going to be called anyway. There is no global
network script to setup the network bridges with xl, so if you are
using xl without xend, you need to manually configure the bridges
using your distro network setup, or, if you are lazy, you can just add
something like:
/etc/xen/scripts/network-bridge start
to your rc.local.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
this patch adds an init script for xl, so that it can be used without
xend installed on the system. In cases in which both toolstacks are
present, only one init script will be run, dependening on the value of
xen_toolstack in /etc/sysconfig/xen_toolstack. Please note that a
correct value of xen_toolstack (either xl or xend), is required now.
The network script and the vif script to be used with xl can be
specified in /etc/sysconfig/xenlightdaemons. Xl sets the vif script
to xl-vif-script by default, that reads /etc/sysconfig/xenlightdaemons
and calls the vif script set there. A port to a debian system should
be straightforward, just replacing /etc/sysconfig with /etc/default
everywhere.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
The attached patch enables to set the environment variables for xend
in /etc/sysconfig/xend.
There are four variables.
XENCONSOLED_TRACE=3D[none|guest|hv|all]
XENSTORED_ROOTDIR=3D/var/lib/xenstored
XENSTORED_TRACE=3D[yes|on|1]
XENBACKENDD_DEBUG=3D[yes|on|1]
The XENCONSOLED_TRACE and XENSTORED_ROOTDIR take strings for each
command's options. And if thease variables have non-zero strings, then
export them.
If the XENSTORED_TRACE and XENBACKENDD_DEBUG take either "yes", "on"
or "1" then export them.
From: Kazuhiro SUZUKI <kaz@jp.fujitsu.com>
Signed-off-by: Keir Fraser <keir.fraser@citrix.com>
udev removed the udevinfo symlink from versions higher than 123 and
xen's build-system could not detect if udev is in place and has the
required version.
Signed-off-by: Marc-A. Dahlhaus <mad@wol.de>
For now hardcode /etc w/o a prefix as there are hardcoded
config paths in the code which would break otherwise.
Signed-off-by: Christoph Egger <Christoph.Egger@amd.com>
Until now the udev script for blktap devices needs to decide if to
signal success or failure to xend. As this script runs completely
independent of blktapctrl and tapdisk/ioemu which do the real work,
the udev script can't even theoretically know if tapdisk is happy.
This patch removes the udev script and replaces its checks by new
ones in libblktap.
Signed-off-by: Kevin Wolf <kwolf@suse.de>
Wei Liu