INVALID_P2M_ENTRY is defined as (xen_pfn_t)-1 and is often used
according to it's type for an invalid pfn. Change the name of the
macro to INVALID_PFN.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
There were some problems with the original memory allocation functions:
1. xc_dom_alloc_segment and xc_dom_alloc_pad ended up calling
xc_dom_chk_alloc_pages while xc_dom_alloc_page open-coded everything.
2. xc_dom_alloc_pad didn't call dom->allocate.
Refactor the code so that:
1. xc_dom_alloc_{segment,pad,page} end up calling
xc_dom_chk_alloc_pages.
2. xc_dom_chk_alloc_pages calls dom->allocate.
This way we avoid scattering dom->allocate over multiple locations and
open-coding.
Also change the return type of xc_dom_alloc_page to xen_pfn_t and return
an invalid pfn when xc_dom_chk_alloc_pages fails.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Tested-by: Ian Campbell <ian.campbell@citrix.com>
Commit 8c45adec18 ("create unmapped
initrd in domain builder if supported") introduced an error for
building a 64 bit guest with a 32 bit toolset.
The initrd start address and size where stored in an unsigned long
instead of using a 64 bit type.
Signed-off-by: Juergen Gross <jgross@suse.com>
Tested-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
c/s abdf3c5b "libxc: create p2m list outside of kernel mapping if supported"
introduces a use which Coverity objects to; an int used to mask a uint64_t.
The result needs to be signed to allow ~XC_DOM_PAGE_SIZE() to function
correctly, and long long to function properly in 32bit builds.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
In case the kernel of a new pv-domU indicates it is supporting a p2m
list outside the initial kernel mapping by specifying INIT_P2M, let
the domain builder allocate the memory for the p2m list from physical
guest memory only and map it to the address the kernel is expecting.
This will enable loading pv-domUs larger than 512 GB.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Carve out the p2m list allocation from the .alloc_magic_pages hook of
the domain builder in order to prepare allocating the p2m list outside
of the initial kernel mapping. This will be needed to support loading
domains with huge memory (>512 GB).
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
In case the kernel of a new pv-domU indicates it is supporting an
unmapped initrd, don't waste precious virtual space for the initrd,
but allocate only guest physical memory for it.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Move some data private to the x86 domain builder to the private data
section. Remove extra_pages as they are used nowhere.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Reorganize struct xc_dom_image to contain a pointer to domain builder
architecture specific private data. This will abstract the architecture
or domain type specific data from the general used data.
The new area is allocated as soon as the domain type is known.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Rename the count_pgtables hook of the domain builder to alloc_pgtables
and do the allocation of the guest memory for page tables inside this
hook. This will remove the need for accessing the x86 specific pgtables
member of struct xc_dom_image in the generic domain builder code.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Guest memory allocation in the domain builder of libxc is done via
virtual addresses only. In order to be able to support preallocated
areas not virtually mapped reorganize the memory allocator to keep
track of allocated pages globally and in allocated segments.
This requires an interface change of the allocate callback of the
domain builder which currently is using the last mapped virtual
address as a parameter. This is no problem as the only user of this
callback is stubdom/grub/kexec.c using this virtual address to
calculate the last used pfn.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
xc_get_bit_size() is being used by the unused python wrapper
xc.getBitSize() only. Remove the wrapper and xc_get_bit_size().
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
In tools/libxc/xc_dom_compat_linux.c xc_linux_build() is the only
domain building function used by an in-tree component (qemu-xen) which
is really necessary.
Remove the other domain building functions and the unused python
wrapper xc.linux_build() referencing one of the to be removed
functions.
Suggested-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
The pv domain builder currently supports the additional flag
"superpages" to build a pv domain with 2MB pages. This feature isn't
being used by any component other than the python xc bindings.
Remove the flag and its support from the xc bindings and the domain
builder
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
This is the xl/xc changes to support Intel Code/Data Prioritization.
CAT xl commands to set/get CBMs are extended to support CDP.
Add new CDP options with CAT commands in xl interface man page.
Add description of CDP in xl-psr.markdown.
Signed-off-by: He Chen <he.chen@linux.intel.com>
Reviewed-by: Chao Peng <chao.p.peng@linux.intel.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Reviewed-by: Wei Liu <wei.liu2@citrix.com>
Place the calls to xc_vcpu_setcontext and the allocation of the hypercall
buffer into the arch-specific vcpu hooks. This is needed in order to
introduce a new builder, so x86 HVM guests can initialize the BSP using
XEN_DOMCTL_sethvmcontext instead of XEN_DOMCTL_setvcpucontext.
This patch should not introduce any functional change.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Wei Liu <wei.liu2@citrix.com>
Previously, if vm_event emulation support was enabled, then REP
optimizations were disabled when emulating REP-compatible
instructions. This patch allows fine-tuning of this behaviour by
providing a dedicated libxc helper function.
Signed-off-by: Razvan Cojocaru <rcojocaru@bitdefender.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Remove unused fields from the domain builder and associated functions.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
And use it almost everywhere. It is easy to use it for the
sysctl since the hypervisor and toolstack are intertwined.
But for the tmem hypercall we need to be dilligient (as it
is guest facing) so delaying that to another patch:
"tmem: Use 'struct xen_tmem_oid' for every user" to help
with bisection issues.
We also move some of the parameters on functions to be within
the right location.
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Acked-by: Jen Beulich <jbeulich@suse.com>
It mentions it but it is never used. The hypercall interface
knows nothing of this sort of thing either. Lets just remove it.
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Acked-by: Wei Liu <wei.liu2@citrix.com> [release + toolstack]
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
As recommended in http://www.gnu.org/licenses/gpl-howto.en.html.
This is the result of:
$ git grep -El Mass\|Temple\|Franklin | xargs ./fsf.pl
Where fsf.pl is:
#!/usr/bin/perl -w -pi.bak -0777
my $repl = 'If not, see <http://www.gnu.org/licenses/>.';
my $br = qr/(?:\s*\n\s*(?:[\*\#]|\/\/|\.\\" )?\s*|\s+)/;
my $inwt = qr/[Ii]f${br}not,${br}write${br}(?:to${br})?the${br}Free${br}Software${br}Foundation,(?:${br}Inc\.,)?/;
my $mass = qr/675${br}Mass${br}Ave,?${br}Cambridge,?${br}MA${br}02139,?${br}USA,?\.?/;
my $franklin = qr/51${br}Franklin${br}St(?:reet)?(?:,${br}| - )Fifth${br}Floor,?${br}Boston,?${br}MA,?${br}02110-1301,?${br}USA,?\.?/;
my $temple = qr/59${br}Temple${br}Place(?:,${br}| - )Suite${br}330,?${br}Boston,?${br}MA,?${br}021110?-1307,?${br}USA,?\.?/;
s|$inwt$br$mass|$repl|m;
s|$inwt$br$franklin|$repl|m;
s|$inwt$br$temple|$repl|m;
The only remaining mentions of these addresses are in COPYING files which I
haven't touched.
Some of the changed files are imports from elsewhere, however
filtering them out is tricky, I think it is tolerable to have these
files be modified here and then perhaps reverted on the next sync,
since it's only 1-2 lines and obvious what is going on.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Update the libxc spec to indicate more sternly that TOOLSTACK records
should no longer be used.
Also, trim further toolstack infrastructure which should have gone in
c/s 39bf4e9 "tools/libxl: Drop all knowledge of toolstack callbacks"
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
CC: Ian Campbell <Ian.Campbell@citrix.com>
CC: Ian Jackson <Ian.Jackson@eu.citrix.com>
CC: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Added support for a new class of vm_events: VM_EVENT_REASON_REQUEST,
sent via HVMOP_request_vm_event. The guest can request that a
generic vm_event (containing only the vm_event-filled guest registers
as information) be sent to userspace by setting up the correct
registers and doing a VMCALL. For example, for a 32-bit guest, this
means: EAX = 34 (hvmop), EBX = 24 (HVMOP_guest_request_vm_event),
ECX = 0 (NULL required for the hypercall parameter, reserved).
Signed-off-by: Razvan Cojocaru <rcojocaru@bitdefender.com>
Acked-by: Tamas K Lengyel <tlengyel@novetta.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Acked-by: George Dunlap <george.dunlap@eu.citrix.com>
Release-acked-by: Wei Liu <wei.liu2@citrix.com>
And call it when a checkpoint record is found in the libxc stream.
Some parts of this patch have been based on patches from the COLO
series.
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Yang Hongyang <yanghy@cn.fujitsu.com>
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Ian Campbell <Ian.Campbell@citrix.com>
CC: Ian Jackson <Ian.Jackson@eu.citrix.com>
CC: Wei Liu <wei.liu2@citrix.com>
---
v3: Named constants for the API
v2: Borrow sufficient fragments from several COLO patches to get
BROKEN_CHANNEL and checkpoint failover to function.
This is the xc/xl changes to support Intel Cache Allocation
Technology(CAT).
'xl psr-hwinfo' is updated to show CAT info and two new commands
for CAT are introduced:
- xl psr-cat-cbm-set [-s socket] <domain> <cbm>
Set cache capacity bitmasks(CBM) for a domain.
- xl psr-cat-show <domain>
Show CAT domain information.
Examples:
[root@vmm-psr vmm]# xl psr-hwinfo --cat
Cache Allocation Technology (CAT):
Socket ID : 0
L3 Cache : 12288KB
Maximum COS : 15
CBM length : 12
Default CBM : 0xfff
[root@vmm-psr vmm]# xl psr-cat-cbm-set 0 0xff
[root@vmm-psr vmm]# xl psr-cat-show
Socket ID : 0
L3 Cache : 12288KB
Default CBM : 0xfff
ID NAME CBM
0 Domain-0 0xff
Signed-off-by: Chao Peng <chao.p.peng@linux.intel.com>
Reviewed-by: Dario Faggioli <dario.faggioli@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
The number of slots per page being 511 (i.e. not a power of two) means
that the (32-bit) read and write indexes going beyond 2^32 will likely
disturb operation. Extend I/O req server creation so the caller can
indicate that it is using suitable atomic accesses where needed (not
all accesses to the two pointers really need to be atomic), allowing
the hypervisor to atomically canonicalize both pointers when both have
gone through at least one cycle.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
As suggested by Andrew Cooper, this patch attempts to remove
some redundancy and allow for an easier time when adding vm_events
for new control registers in the future, by having a single
VM_EVENT_REASON_WRITE_CTRLREG vm_event type, meant to serve CR0,
CR3, CR4 and (newly introduced) XCR0. The actual control register
will be deduced by the new .index field in vm_event_write_ctrlreg
(renamed from vm_event_mov_to_cr).
Signed-off-by: Razvan Cojocaru <rcojocaru@bitdefender.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Tim Deegan <tim@xen.org>
Said commit ("libxl_set_memory_target: retain the same maxmem offset on
top of the current target") caused a regression for "xl mem-set"
against Dom0: While prior to creation of the first domain this works,
the first domain creation involving ballooning breaks. Due to "enforce"
not being set in the domain creation case, and due to Dom0's initial
->max_pages (in the hypervisor) being UINT_MAX, the calculation of
"memorykb" in the first "xl mem-set" adusting the target upwards
subsequent to domain creation and termination may cause an overflow,
resulting in Dom0's maximum getting to a very small value. This small
maximum will the make the subsequent setting of the PoD target fail.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
When we use a DECLARE_HYPERCALL_BUFFER_SHADOW it defines a user
pointer '_name' and a shadow xc_hypercall_buffer_t.
When calling xc_hypercall_buffer_free_pages(_xch, _name, _nr),
the complier will report '_name' unused error, because
xc_hypercall_buffer_free_pages() is a MACRO and '_name' is
transparently converted to the hypercall buffer. it confuses
the caller because xc_hypercall_buffer_free_pages() looks
like a function and takes '_name' as an arg.
Add an if check to let the compiler think we are actually
using the argument '_name'.
Signed-off-by: Yang Hongyang <yanghy@cn.fujitsu.com>
CC: Ian Campbell <Ian.Campbell@citrix.com>
CC: Ian Jackson <Ian.Jackson@eu.citrix.com>
CC: Wei Liu <wei.liu2@citrix.com>
CC: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Ian Campbell <Ian.Campbell@citrix.com>
[ ijc -- some rewording of the commit message ]
There are cases where we only need to use the hypercall buffer data,
and do not use the xc_hypercall_buffer_t struct.
DECLARE_HYPERCALL_BUFFER_SHADOW defines a user pointer that can allow
us to access the hypercall buffer data but it also defines a
xc_hypercall_buffer_t that we don't use, the compiler will report arg
unused error.
Add __attribute__((unused)) before xc_hypercall_buffer_t to avoid
the compiler error.
Example cases:
In send_all_pages(), we only need to use the hypercall buffer data
which is a dirty bitmap, we set the dirty bitmap to all dirty and call
send_dirty_pages, we will not use the xc_hypercall_buffer_t and hypercall
to retrieve the dirty bitmap.
In send_some_pages(), we will also only need to use the dirty_bitmap.
the retrieve dirty bitmap hypercall are done by the caller.
Signed-off-by: Yang Hongyang <yanghy@cn.fujitsu.com>
CC: Ian Campbell <Ian.Campbell@citrix.com>
CC: Ian Jackson <Ian.Jackson@eu.citrix.com>
CC: Wei Liu <wei.liu2@citrix.com>
CC: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Ian Campbell <Ian.Campbell@citrix.com>
The old code checks the callbacks "postcopy & checkpoint", if the
callbacks exists, it will call them. However this is unreliable, so
add this flag to explicitly indicate a checkpointed stream in the new
code. This is backward compatible with the legacy migration just don't
know this flag and will ignore it.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
CC: Ian Campbell <Ian.Campbell@citrix.com>
CC: Ian Jackson <Ian.Jackson@eu.citrix.com>
CC: Wei Liu <wei.liu2@citrix.com>
CC: Yang Hongyang <yanghy@cn.fujitsu.com>
Acked-by: Ian Campbell <Ian.Campbell@citrix.com>
[ ijc -- added discussion of legacy compat ]
Juergen Gross
Wei Liu
Andrew Cooper
He Chen
Roger Pau Monne
Razvan Cojocaru
Vitaly Kuznetsov
Konrad Rzeszutek Wilk
Ian Campbell
Tamas K Lengyel
Julien Grall
Tiejun Chen
Chao Peng
Dario Faggioli
Jan Beulich
Yang Hongyang