The original rule to target "distclean" in tools/Rules.mk was in effect
"make clean". It should be "make distclean".
However not all Makefiles in subdirectories have distclean target
defined. So this patch also adds a bunch of distclean targets to various
Makefiles. They only depend on clean target and don't have any actions
in most cases.
With the patch applied, following command outputs 0 results:
find tools -name 'Makefile*' -exec grep -L 'distclean' {} \+ \
| grep -v ocaml | grep -v libfsimage
Ocaml and libfsimage are known to have distclean defined in a dedicated
rules file.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Also moves xc_dom.h to include as it is used often by other xen tools.
Use the new include subdirectories to build Xen tools, qemu-xen and
stubdoms.
Add the old libxc include path to the programs that need it to build,
on a case by case basis and commeting that they shouldn't require
internal libxc headers to build.
[ And: update QEMU_TRADITIONAL_REVISION to corresponding qemu patch
- Ian jackson ]
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
We have defaulted to using the system libaio for a while now and I din't think
there are any relevant distros which don't have it that running Xen 4.4 would
be reasonable on.
Also it has caused confusion because it is not ever wanted on ARM, but the
build system doesn't express that (could be fixed, but deleting is the right
thing to do anyway).
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Matt Wilson <msw@amazon.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
In blktap2 MEMSHR_DIR is used before it is set. This removes the
required -D_GNU_SOURCE from CFLAGS, its used as option for -I
Fix this by moving memshr related flags to the place where its actually
used.
The failure is a missing O_DIRECT define.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Committed-by: Ian Jackson <ian.jackson.citrix.com>
This patch addresses some of the compile and link issues with the memshr
module.
Signed-off-by: Adin Scannell <adin@scannell.ca>
Signed-off-by: Andres Lagar-Cavilla <andres@lagarcavilla.org>
Acked-by: Ian Jackson <ian.jackson.citrix.com>
Committed-by: Ian Jackson <ian.jackson.citrix.com>
I could have sworn I did this years ago.
IIRC the need for our own copy was due to the use of io_set_eventfd which is
not present in version 0.3.106. However it is in 0.3.107 the first version of
which was uploaded to Debian in June 2008 (I can't find a better reference for
the release date).
The necessary version is available in Debian Lenny onwards and is in at least
RHEL 6, Fedora 13 and OpenSuSE 11.3. The necessary version appears to not be
available in RHEL 5 or SLES 11 which is why I haven't simply nuked the in tree
version.
This is based on tools-system-libaio.diff from the Debian packaging although I
have made it optional (but default on).
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
hashtable.c has already been copied, forked and modified, there
doesn't seem much point in avoiding the same for the header until
someone feels motivated to properly refactor.
Add comments to the various duplicated files cross-referencing each
other for future reference and as a barrier to forking again...
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
A fair few things under tools link against libraries which they don't
even use.
Most of this appears to come from copy-and-pasting previous Makefile
snippets and cargo-culting plus the tendency to define global $(LIBS)
even for Makefiles which build multiple separate utilities or
libraries.
Identified by comparing a build with --as-needed to one without by
looking at the NEEDED header of all ELF objects.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
In particular if binary A uses libB and libB uses libC entirely
internally then A does not need to link against libC only libB.
However when linking binary A the linker does need to have visibility
of the libraries which libB links against (libC in this example). For
out of tree uses this is achieved without fuss due because the
libraries are installed in a standard path. However in the case of
in-tree users the linker needs a hint in the form of the -rpath-link
option. Therefore a new class of build variable, $(SHLIB_FOO), is
introduced which includes the linker options needed to link against a
library which uses libFOO. The intention is that $(LDLIBS_bar) will
include the $(SHLIB_foo)s which it uses where necessary rather
requiring that users are aware of this.
For the python extensions this change appears particularly large since
previously each of python bindings were linked against the union of
all possible libraries used by all bindings instead of just what they
individually needed.
This change removes a dependency on libdl.so from nearly everything
in the system, only libxenctrl actually uses it.
In the context of xl/libxl the intention of libxl is to remove any
need for a user of libxl to know about libxenstore or libxenctrl,
however in the current build it is xl which links against those
libraries rather than libxl (which only links against libc). After
this change libxl correctly depends on the libraries it uses and xl
does not depend on libraries which it is not support to be required to
know about. Note that xl does depend on libxenctrl.so since it uses
xtl_* directly.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
Otherwise make can search the path relative to certain standard paths
such as /usr/include (e.g., the line '-include $(XEN_ROOT)/.config' in
Config.mk suffers from this).
Signed-off-by: Keir Fraser <keir@xen.org>
Linker command lines are order-sensitive.
Move linker options -Lfoo -lfoo from LDFLAGS to LDLIBS and place this new
variable after the objects to link. This resolves build errors in xenpagin
and blktap with recent toolchains.
rename SHLIB_CFLAGS to SHLIB_LDFLAGS
rename LDFLAGS_* to LDLIBS_*
move LDFLAGS usage after CFLAGS in CC calls
remove stale comments in xenpaging Makefile
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Tapdisk control in userspace, a replacement for the original blktap2
control stack, which had to pass a kernel space interface based on
sysfs nodes.
All tapdisk processes listen for commands on a unix stream socket. The
control library supports scanning the socket namespace for running
tapdisks, VBD minors allocated, associated images and state inquiry.
Control operations include allocating/releasing devices, spawning
tapdisks, opening/closing images, attaching disk images to
devices. disk pause/resume operations and runtime switching of disk
images.
Signed-off-by: Jake Wires <jake.wires@citrix.com>
Signed-off-by: Daniel Stodden <daniel.stodden@citrix.com>
Stop coercing drivers/disktype code into the tool stack. Make both
blktapctrl and tap-ctl transfer type/path pairs as "<type>:<path>"
strings. Remove the message.disktype integer altogether.
Signed-off-by: Daniel Stodden <daniel.stodden@citrix.com>
Signed-off-by: Jake Wires <jake.wires@citrix.com>
Attached patch makes memshr optional for blktap/blktap2.
This fixes build for platforms where memshr isn't build on.
While there, make indentation consistent.
Signed-off-by: Christoph Egger <Christoph.Egger@amd.com>
a single map is used to store mappings between sharing handles and disk blocks.
This is used to share pages which store data read of the same blocks on
(virtual) disk.
Note that the map is stored in a shared memory region, as it needs to be
accessed by multiple tapdisk processes. This complicates memory allocation
(malloc cannot be used), prevents poniters to be stored directly (as the shared
memory region might and is mapped at different base address) and finally pthread
locks need to be multi-process aware.
Signed-off-by: Grzegorz Milos <Grzegorz.Milos@citrix.com>
Blktap2 port of remus disk driver. Backwards compatable with blktap1
implementation.
Signed-off-by: Ryan O'Connor <rjo@cs.ubc.ca>
Signed-off-by: Brendan Cully <brendan@cs.ubc.ca>
- Use standard off_t and lseek() instead of non-portable off64_t and
lseek64()
- Use uuid API as documented in DCE 1.1 RPC specification
- Add NetBSD implementation for blk_getimagesize() and
blk_getsectorsize()
- Use blk_getimagesize() and blk_getsectorsize()
- Fix uuid header check
Signed-off-by: Christoph Egger <Christoph.Egger@amd.com>
Signed-off-by: Keir Fraser <keir.fraser@citrix.com>
This patch re-enables a useful blktap1 for users who disable blktap2.
Itremoves tapdisk and blktapctrl from blktap2, both of which cause
problems with blktap operation. In addition, this patch modifies xend
to check for blktap2 installation. If the blktap2 driver isn't
running (hopefully because the dom0 kernel option wasn't selected) we
fall back to blktap.
Signed-off-by: Dutch Meyer <dmeyer@cs.ubc.ca>
- clean up to use SUBDIRS-y
- With parallel make, libvhd might not be created before
link. guarantee it.
- use LDFLAGS for link which is set by upper level makefiles.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Benefits to blktap2 over the old version of blktap:
* Isolation from xenstore - Blktap devices are now created directly on
the linux dom0 command line, rather than being spawned in response
to XenStore events. This is handy for debugging, makes blktap
generally easier to work with, and is a step toward a generic
user-level block device implementation that is not Xen-specific.
* Improved tapdisk infrastructure: simpler request forwarding, new
request scheduler, request merging, more efficient use of AIO.
* Improved tapdisk error handling and memory management. No
allocations on the block data path, IO retry logic to protect
guests
transient block device failures. This has been tested and is known
to work on weird environments such as NFS soft mounts.
* Pause and snapshot of live virtual disks (see xmsnap script).
* VHD support. The VHD code in this release has been rigorously
tested, and represents a very mature implementation of the VHD
image
format.
* No more duplication of mechanism with blkback. The blktap kernel
module has changed dramatically from the original blktap. Blkback
is now always used to talk to Xen guests, blktap just presents a
Linux gendisk that blkback can export. This is done while
preserving the zero-copy data path from domU to physical device.
These patches deprecate the old blktap code, which can hopefully be
removed from the tree completely at some point in the future.
Signed-off-by: Jake Wires <jake.wires@citrix.com>
Signed-off-by: Dutch Meyer <dmeyer@cs.ubc.ca>
Olaf Hering
Wei Liu
Stefano Stabellini
Ian Campbell
Keir Fraser
Andres Lagar-Cavilla
Gianni Tedesco
Stefano Stabellini
Keir Fraser