Place the calls to xc_vcpu_setcontext and the allocation of the hypercall
buffer into the arch-specific vcpu hooks. This is needed in order to
introduce a new builder, so x86 HVM guests can initialize the BSP using
XEN_DOMCTL_sethvmcontext instead of XEN_DOMCTL_setvcpucontext.
This patch should not introduce any functional change.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Wei Liu <wei.liu2@citrix.com>
As recommended in http://www.gnu.org/licenses/gpl-howto.en.html.
This is the result of:
$ git grep -El Mass\|Temple\|Franklin | xargs ./fsf.pl
Where fsf.pl is:
#!/usr/bin/perl -w -pi.bak -0777
my $repl = 'If not, see <http://www.gnu.org/licenses/>.';
my $br = qr/(?:\s*\n\s*(?:[\*\#]|\/\/|\.\\" )?\s*|\s+)/;
my $inwt = qr/[Ii]f${br}not,${br}write${br}(?:to${br})?the${br}Free${br}Software${br}Foundation,(?:${br}Inc\.,)?/;
my $mass = qr/675${br}Mass${br}Ave,?${br}Cambridge,?${br}MA${br}02139,?${br}USA,?\.?/;
my $franklin = qr/51${br}Franklin${br}St(?:reet)?(?:,${br}| - )Fifth${br}Floor,?${br}Boston,?${br}MA,?${br}02110-1301,?${br}USA,?\.?/;
my $temple = qr/59${br}Temple${br}Place(?:,${br}| - )Suite${br}330,?${br}Boston,?${br}MA,?${br}021110?-1307,?${br}USA,?\.?/;
s|$inwt$br$mass|$repl|m;
s|$inwt$br$franklin|$repl|m;
s|$inwt$br$temple|$repl|m;
The only remaining mentions of these addresses are in COPYING files which I
haven't touched.
Some of the changed files are imports from elsewhere, however
filtering them out is tricky, I think it is tolerable to have these
files be modified here and then perhaps reverted on the next sync,
since it's only 1-2 lines and obvious what is going on.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
EACCES cannot be distinguished against an incorrect DOMCTL_INTERFACE_VERSION,
and will cause an incorrect "need to rebuild the user-space tool set?" message
from libxc.
On the libxc side, put the useful piece of information in the error message,
rathe than the -1 from do_domctl().
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
The code to initialize the grant table in libxc uses
xc_domain_maximum_gpfn() + 1 to get a guest pfn for mapping the grant
frame and to initialize it.
This solution has two major issues:
- The check of the return of xc_domain_maximum_gpfn is buggy because
xen_pfn_t is unsigned and in case of an error -ERRNO is returned.
Which is never catch with ( pfn <= 0 ).
- The guest memory layout maybe filled up to the end, i.e
xc_domain_maximum_gpfn() + 1 gives either 0 or an invalid PFN due to
hardware limitation.
Futhermore, on ARM, xc_domain_maximum_gpfn() is not implemented and
return -ENOSYS. This will make libxc to use always the same PFN which
may colapse with an already mapped region (see xen/include/public/arch-arm.h
for the layout).
This patch only address the problem for ARM, the x86 version use the same
behavior (ie xc_domain_maximum_gpfn() + 1), as I'm not familiar with Xen x86.
A new function xc_core_arch_get_scratch_gpfn is introduced to be able to
choose the gpfn per architecture.
For the ARM version, we use the GUEST_GNTTAB_GUEST which is the base of
the region by the guest to map the grant table. At the build time,
nothing is mapped there.
At the same time correctly check the return of xc_domain_maximum_gpfn
for x86.
Signed-off-by: Julien Grall <julien.grall@linaro.org>
Cc: Jan Beulich <jbeulich@suse.com>
Cc: Andrew Cooper <andrew.cooper3@citrix.com>
Cc: Roger Pau Monné <roger.pau@citrix.com>
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Wei Liu <wei.liu2@citrix.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Guests are initially started with caches disabled and so we need to make sure
they see consistent data in RAM (requiring a cache clean) but also that they
do not have old stale data suddenly appear in the caches when they enable
their caches (requiring the invalidate).
This can be split into two halves. First we must flush each page as it is
allocated to the guest. It is not sufficient to do the flush at scrub time
since this will miss pages which are ballooned out by the guest (where the
guest must scrub if it cares about not leaking the pagecontent). We need to
clean as well as invalidate to make sure that any scrubbing which has occured
gets committed to real RAM. To achieve this add a new cacheflush_page function,
which is a stub on x86.
Secondly we need to flush anything which the domain builder touches, which we
do via a new domctl.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Julien Grall <julien.grall@linaro.org>
Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Cc: keir@xen.org
In order to set up the grant table for HVM guests, libxc needs to map
the grant table temporarily. At the moment, it does this by adding the
grant page to the HVM guest's p2m table in the MMIO hole (at gfn 0xFFFFE),
then mapping that gfn, setting up the table, then unmapping the gfn and
removing it from the p2m table.
This breaks with PVH guests with 4G or more of ram, because there is
no MMIO hole; so it ends up clobbering a valid RAM p2m entry, then
leaving a "hole" when it removes the grant map from the p2m table.
Since the guest thinks this is normal ram, when it maps it and tries
to access the page, it crashes.
This patch maps the page at max_gfn+1 instead.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Tim Deegan <tim@xen.org>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Keir Fraser <keir@xen.org>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The wrapper is there already, so better use it in place of
all the stuff required to issue a call to do_domctl() for
XEN_DOMCTL_getdomaininfo.
Signed-off-by: Dario Faggioli <dario.faggioli@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
The wrapper is there already, so better use it in place of
all the stuff required to issue a call to do_domctl() for
XEN_DOMCTL_setvcpucontext.
Signed-off-by: Dario Faggioli <dario.faggioli@citrix.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
The emacs variable to set the C style from a local variable block is
c-file-style, not c-set-style.
Signed-off-by: David Vrabel <david.vrabel@citrix.com
Make xc_dom_feature_translated an arch-dependent function.
alloc_magic_pages: save console and xenstore pfn's in xc_dom_image.
alloc_magic_pages: set HVM_PARAM_CONSOLE_EVTCHN and
HVM_PARAM_STORE_EVTCHN hvm_params using the event channels allocated by
the toolstack.
Call xc_dom_gnttab_hvm_seed instead of xc_dom_gnttab_seed in
xc_dom_gnttab_init for autotranslated guests.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Ian Campbell <ian.campbell@citrix.com>
gcc 4.8 identifies several places where code of the form memset(x, 0,
sizeof(x)); is used incorrectly, meaning that less memory is set to
zero than required.
Signed-off-by: Michael Young <m.a.young@durham.ac.uk>
Committed-by: Keir Fraser <keir@xen.org>
Removed support from libxc and mini-os.
This also took me under xen/include/public via various symlinks.
Dropped tools/debugger/xenitp entirely, it was described upon commit
as:
"Xenitp is a low-level debugger for ia64" and doesn't appear to be
linked into the build anywhere.
99 files changed, 14 insertions(+), 32361 deletions(-)
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Keir Fraser <keir@xen.org>
Committed-by: Ian Campbell <ian.campbell@citrix.com>
(defer save/restore and shadow related interfaces til a later patch)
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Ian Jackson <ian.jackson.citrix.com>
# User Ian Campbell <ian.campbell@citrix.com>
# Date 1282671421 -3600
# Node ID d1dd29a470ef1b9d2c77478a123326036dfe90bb
# Parent d7a4adad9c328decbd384d87b23001aea8951b86
tools/libxc, tools/libelf: Relicense under LGPL v2.1
Relicense these two libraries under LGPL v2.1 only except where
individual files already included the "or later" provision.
Copyright holders have been contacted by Stephen Spector and have all
agreed this change.
Removed tools/libxc/ia64/aclinux.h since it appeared to be
unused. There is a separate, more up to date, copy in
xen/include/acpi/platform/aclinux.h which does appear to be used.
Clarify the license of MiniOS privcmd.h under the same terms as other
tools/include/xen-sys headers.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Stephen Spector <stephen.spector@citrix.com>
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
This patch eliminate the global variables in libxenctrl (used for
logging and error reporting).
Instead the information which was in the global variables is now in a
new xc_interface* opaque structure, which xc_interface open returns
instead of the raw file descriptor; furthermore, logging is done via
xentoollog.
There are three new parameters to xc_interface_open to control the
logging, but existing callers can just pass "0" for all three to get
the old behaviour.
All libxc callers have been adjusted accordingly.
Also update QEMU_TAG for corresponding qemu change.
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
This patch adds the option "superpages" to the domain configuration
file. If it is set, the domain is populated using 2M pages.
This code does not support fallback to small pages. If the domain can
not be created with 2M pages, the create will fail.
The patch also includes support for saving and restoring domains with
the superpage flag set. However, if a domain has freed small pages
within its physical page array and then extended the array, the
restore will fill in those freed pages. It will then attempt to
allocate more than its memory limit and will fail. This is
significant because apparently Linux does this during boot, thus a
freshly booted Linux image can not be saved and restored successfully.
Signed-off-by: Dave McCracken <dcm@mccr.org>
Roger Pau Monne
Ian Campbell
Andrew Cooper
Julien Grall
Dario Faggioli
David Vrabel
Stefano Stabellini
Michael Young
Alex Zeffertt
Keir Fraser
Keir Fraser
Hollis Blanchard
kfraser@localhost.localdomain
kaf24@localhost.localdomain
Emmanuel Ackaouy