This reverts commit c7d3afbb44 which
broke the libvirt build, since libvirt uses xtl_* and hence needs
updating to link against the new library when necessary.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
In attempting to disaggregate libxenctrl I found that many of the
pieces were going to want access to this library, so split it out (as
it probably should always have been).
Various build adjustments are needed. In particular things which use
xtl_* themselves now need to explicity link against the library.
This has a nice side effect which is that users of libxl no longer
need to link against libxenctrl just to create a logger, which was
counter to the principal that applications using libxl shouldn't be
required to look behind the curtain. This means that xl no longer
links against libxenctrl.
The new library uses a version script to ensure that only expected
symbols are exported and to version them such that ABI guarantees can
be kept in the future.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
[ ijc -- Update QEMU_TRADITIONAL_REVISION and MINIOS_UPSTREAM_REVISION ]
As recommended in http://www.gnu.org/licenses/gpl-howto.en.html.
This is the result of:
$ git grep -El Mass\|Temple\|Franklin | xargs ./fsf.pl
Where fsf.pl is:
#!/usr/bin/perl -w -pi.bak -0777
my $repl = 'If not, see <http://www.gnu.org/licenses/>.';
my $br = qr/(?:\s*\n\s*(?:[\*\#]|\/\/|\.\\" )?\s*|\s+)/;
my $inwt = qr/[Ii]f${br}not,${br}write${br}(?:to${br})?the${br}Free${br}Software${br}Foundation,(?:${br}Inc\.,)?/;
my $mass = qr/675${br}Mass${br}Ave,?${br}Cambridge,?${br}MA${br}02139,?${br}USA,?\.?/;
my $franklin = qr/51${br}Franklin${br}St(?:reet)?(?:,${br}| - )Fifth${br}Floor,?${br}Boston,?${br}MA,?${br}02110-1301,?${br}USA,?\.?/;
my $temple = qr/59${br}Temple${br}Place(?:,${br}| - )Suite${br}330,?${br}Boston,?${br}MA,?${br}021110?-1307,?${br}USA,?\.?/;
s|$inwt$br$mass|$repl|m;
s|$inwt$br$franklin|$repl|m;
s|$inwt$br$temple|$repl|m;
The only remaining mentions of these addresses are in COPYING files which I
haven't touched.
Some of the changed files are imports from elsewhere, however
filtering them out is tricky, I think it is tolerable to have these
files be modified here and then perhaps reverted on the next sync,
since it's only 1-2 lines and obvious what is going on.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Unlikely that it may seem localtime_r could fail, which would result in a
null pointer dereference. In this case, it shoud log the errno, (instead of
the date/time), and and continue its logging, as this is still useful.
Signed-off-by: Jennifer Herbert <jennifer.herbert@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Provide flags
XTL_STDIOSTREAM_PROGRESS_USE_CR
XTL_STDIOSTREAM_PROGRESS_NO_CR
to allow the caller to force, or disable, the use of \r-based
overwriting of progress messages.
In the implementation, rename the variable "tty" to "progress_use_cr".
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
CC: Olaf Hering <olaf@aepfle.de>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
As suggested by IanJ:
Check isatty only once to preserve the errno of ->progress users, and to
reduce the noice in strace output.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
If the output goes to a tty, rewind the cursor and print everything in a
single line as it was done up to now. If the output goes to a file or
pipe print a newline after each progress output. This will fix logging
of progress messages from xc_save to xend.log.
To support XTL_STDIOSTREAM_SHOW_PID or XTL_STDIOSTREAM_SHOW_DATE print
the output via vmessage if the output is not a tty.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Ian Campbell <ian.campbell@citrix.com>
In xc_domain_save ensure that we signal completion at the end of each
batch.
This ensures that the next logged line starts on a new line. e.g. instead of:
Savefile contains xl domain config
xc: Saving memory: iter 3 (last sent 0 skipped 0): 0/32768 0%migration target: Transfer complete, requesting permission to start domain.
migration sender: Target has acknowledged transfer.
what is desired is:
Savefile contains xl domain config
xc: Saving memory: iter 0 (last sent 0 skipped 0): 32768/32768 100%
xc: Saving memory: iter 1 (last sent 32576 skipped 192): 32768/32768 100%
xc: Saving memory: iter 2 (last sent 217 skipped 0): 32768/32768 100%
xc: Saving memory: iter 3 (last sent 0 skipped 0): 32768/32768 100%
migration target: Transfer complete, requesting permission to start domain.
migration sender: Target has acknowledged transfer.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
# User Ian Campbell <ian.campbell@citrix.com>
# Date 1282671421 -3600
# Node ID d1dd29a470ef1b9d2c77478a123326036dfe90bb
# Parent d7a4adad9c328decbd384d87b23001aea8951b86
tools/libxc, tools/libelf: Relicense under LGPL v2.1
Relicense these two libraries under LGPL v2.1 only except where
individual files already included the "or later" provision.
Copyright holders have been contacted by Stephen Spector and have all
agreed this change.
Removed tools/libxc/ia64/aclinux.h since it appeared to be
unused. There is a separate, more up to date, copy in
xen/include/acpi/platform/aclinux.h which does appear to be used.
Clarify the license of MiniOS privcmd.h under the same terms as other
tools/include/xen-sys headers.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Stephen Spector <stephen.spector@citrix.com>
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
* Provide a new XTL_STDIOSTREAM_HIDE_PROGRESS flag in the stdio logger
* Provide a way to adjust the flags after logger setup
* Use these to disable progress output from the migration receiver, as
the sender is also sending progress information.
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
The -v option, which must come before the xl command, increases the
logging level each time it is supplied.
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
We provide a new header file "xentoollog.h" which defines an interface
that libraries and applications can use for logging. This avoids
having to wrap each library's log callbacks up, massage arguments to
log callbacks, and so on.
The library's .o files are within libxc to avoid having to create a
separate lib*.a, but callers do not need to #include xenctrl.h and it
should be regarded as a separate API.
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Ian Campbell
Jennifer Herbert
Roger Pau Monne
Ian Jackson
Matthew Daley
Olaf Hering
Keir Fraser