XEN_LIB_STORED is serving no real purpose, as it is a mount point for
a tmpfs, so it can be replaced easily by XEN_RUN_STORED.
XENSTORED_ROOTDIR is basically unused already, there is just a single
reference in xs_daemon_rootdir() with a fallback to XEN_LIB_STORED,
and a .gdbinit file setting it.
Remove the .gdbinit file, as it is not known having been used since
ages, and make xs_daemon_rootdir() an alias of xs_daemon_rundir().
Reported-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Release-acked-by: Henry Wang <Henry.Wang@arm.com>
Make may not have copied "_libxl_types_json.h" into $(XEN_INCLUDE)
before starting to build the different objects.
Make sure that the generated headers are copied into $(XEN_INCLUDE)
before using them. This is achieved by telling make about which
headers are needed to use "libxl_internal.h" which use "libxl_json.h"
which uses "_libxl_types_json.h". "libxl_internal.h" also uses
"libxl.h" so add it to the list.
This also prevent `gcc` from using a potentially installed headers
from a previous version of Xen.
Reported-by: Per Bilse <per.bilse@citrix.com>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Release-acked-by: Henry Wang <Henry.Wang@arm.com>
Instead of moving the public "_libxl_*.h" headers, we make a copy to
the destination so that make doesn't try to remake the targets
"_libxl_*.h" in libs/light/ again.
A new .PRECIOUS target is added to tell make to not deletes the
intermediate targets generated by "gentypes.py".
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Release-acked-by: Henry Wang <Henry.Wang@arm.com>
Currently, a rebuild of libxl will always rebuild "build.o". This is because
the target depends on "acpi" which never exist. So instead we will have
"build.o" have as prerequisites targets that are actually generated by "acpi",
that is $(DSDT_FILES-y).
While "dsdt_*.c" isn't really a dependency for "build.o", a side
effect of building that dsdt_*.c is to also generate the "ssdt_*.h"
that "build.o" needs, but I don't want to list all the headers needed
by "build.o" and duplicate the information available in
"libacpi/Makefile" at this time.
Also avoid duplicating the "acpi" target for Arm, and unique one for
both architecture. And move the "acpi" target to be with other targets
rather than in the middle of the source listing. For the same reason,
move the prerequisites listing for both $(DSDT_FILES-y) and "build.o".
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Release-acked-by: Henry Wang <Henry.Wang@arm.com>
$(SHLIB_LDFLAGS) is used by more targets that the single targets that
except it (libxenfoo.so.X.Y). There is also some dynamic libraries in
stats/ that uses $(SHLIB_LDFLAGS) (even if those are never built), and
there's libxenlight_test.so which doesn't needs a version script.
Also, libxenlight_test.so might failed to build if the version script
doesn't exist yet.
For these reasons, avoid changing the generic $(SHLIB_LDFLAGS) flags,
and add the flag directly on the command line.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Release-acked-by: Henry Wang <Henry.Wang@arm.com>
This doesn't matter yet but it will when for example the script will
be run from tools/ to generate files tools/libs/light/.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Release-acked-by: Henry Wang <Henry.Wang@arm.com>
This commit implements the `XEN_DOMCTL_shadow_op` support in Xen
for Arm. The p2m pages pool size for xl guests is supposed to be
determined by `XEN_DOMCTL_shadow_op`. Hence, this commit:
- Introduces a function `p2m_domctl` and implements the subops
`XEN_DOMCTL_SHADOW_OP_SET_ALLOCATION` and
`XEN_DOMCTL_SHADOW_OP_GET_ALLOCATION` of `XEN_DOMCTL_shadow_op`.
- Adds the `XEN_DOMCTL_SHADOW_OP_SET_ALLOCATION` support in libxl.
Therefore enabling the setting of shadow memory pool size
when creating a guest from xl and getting shadow memory pool size
from Xen.
Note that the `XEN_DOMCTL_shadow_op` added in this commit is only
a dummy op, and the functionality of setting/getting p2m memory pool
size for xl guests will be added in following commits.
This is part of CVE-2022-33747 / XSA-409.
Signed-off-by: Henry Wang <Henry.Wang@arm.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
This commit adds a per-arch macro `EXTRA_DEFAULT_PAGING_MEM_MB`
to the default paging memory size, in order to cover the p2m
pool for extended regions of a xl-based guest on Arm.
For Arm, the extra default paging memory is 128MB.
For x86, the extra default paging memory is zero, since there
are no extended regions on x86.
Also update the xl.cfg documentation to add Arm documentation
according to code changes.
This is part of CVE-2022-33747 / XSA-409.
Signed-off-by: Henry Wang <Henry.Wang@arm.com>
Reviewed-by: Julien Grall <jgrall@amazon.com>
vchan server creates XenStore entries to advertise its event channel and
ring, but those are not removed after the server quits.
Add additional cleanup step, so those are removed, so clients do not try
to connect to a non-existing server.
Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Signed-off-by: Dmytro Semenets <dmytro_semenets@epam.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
This can be used when linking against multiple in-tree Xen libraries,
and avoid duplicated flags. It can be used instead of multiple
$(LDLIBS_libxen*).
For now, replace the open-coding in libs.mk.
The macro $(xenlibs-libs, ) will be useful later when only the path to
the libraries is wanted (e.g. for checking for dependencies).
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
This patch introduce a new macro $(xenlibs-dependencies,) to generate
a list of all the xen library that a library is list against, and they
are listed only once. We use the side effect of $(sort ) which remove
duplicates.
This is used by another macro $(xenlibs-rpath,) which is to replace
$(SHDEPS_libxen*).
In libs.mk, we don't need to $(sort ) SHLIB_lib* anymore as this was used
to remove duplicates and they are no more duplicates.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
"int" is not a suitable type to hold / receive "time_t" values.
The parameter is presently unused, so no functional change.
Coverity ID: 1509377
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
-soundhw is deprecated since 825ff02911c9 ("audio: add soundhw
deprecation notice"), QEMU v5.1, and is been remove for upcoming v7.1
by 039a68373c45 ("introduce -audio as a replacement for -soundhw").
Instead we can just add the sound card with "-device", for most option
that "-soundhw" could handle. "-device" is an option that existed
before QEMU 1.0, and could already be used to add audio hardware.
The list of possible option for libxl's "soundhw" is taken the list
from QEMU 7.0.
The list of options for "soundhw" are listed in order of preference in
the manual. The first three (hda, ac97, es1370) are PCI devices and
easy to test on Linux, and the last four are ISA devices which doesn't
seems to work out of the box on linux.
The sound card 'pcspk' isn't listed even if it used to be accepted by
'-soundhw' because QEMU crash when trying to add it to a Xen domain.
Also, it wouldn't work with "-device" might need to be "-machine
pcspk-audiodev=default" instead.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Jason Andryuk <jandryuk@gmail.com>
There is no need to call the "headers.chk" target when it isn't
wanted, so it never need to be .PHONY.
Also, there is no more reason to separate the prerequisites from the
recipe.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Bertrand Marquis <bertrand.marquis@arm.com>
"-sdl" is deprecated upstream since 6695e4c0fd9e ("softmmu/vl:
Deprecate the -sdl and -curses option"), QEMU v6.2, and the option is
removed by 707d93d4abc6 ("ui: Remove deprecated options "-sdl" and
"-curses""), in upcoming QEMU v7.1.
Instead, use "-display sdl", available since 1472a95bab1e ("Introduce
-display argument"), before QEMU v1.0.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Jason Andryuk <jandryuk@gmail.com>
Reuse generic IOMMU device tree bindings to communicate Xen specific
information for the virtio devices for which the restricted memory
access using Xen grant mappings need to be enabled.
Insert "iommus" property pointed to the IOMMU node with "xen,grant-dma"
compatible to all virtio devices which backends are going to run in
non-hardware domains (which are non-trusted by default).
Based on device-tree binding from Linux:
Documentation/devicetree/bindings/iommu/xen,grant-dma.yaml
The example of generated nodes:
xen_iommu {
compatible = "xen,grant-dma";
#iommu-cells = <0x01>;
phandle = <0xfde9>;
};
virtio@2000000 {
compatible = "virtio,mmio";
reg = <0x00 0x2000000 0x00 0x200>;
interrupts = <0x00 0x01 0xf01>;
interrupt-parent = <0xfde8>;
dma-coherent;
iommus = <0xfde9 0x01>;
};
virtio@2000200 {
compatible = "virtio,mmio";
reg = <0x00 0x2000200 0x00 0x200>;
interrupts = <0x00 0x02 0xf01>;
interrupt-parent = <0xfde8>;
dma-coherent;
iommus = <0xfde9 0x01>;
};
Signed-off-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
This patch introduces helpers to allocate Virtio MMIO params
(IRQ and memory region) and create specific device node in
the Guest device-tree with allocated params. In order to deal
with multiple Virtio devices, reserve corresponding ranges.
For now, we reserve 1MB for memory regions and 10 SPIs.
As these helpers should be used for every Virtio device attached
to the Guest, call them for Virtio disk(s).
Please note, with statically allocated Virtio IRQs there is
a risk of a clash with a physical IRQs of passthrough devices.
For the first version, it's fine, but we should consider allocating
the Virtio IRQs automatically. Thankfully, we know in advance which
IRQs will be used for passthrough to be able to choose non-clashed
ones.
Signed-off-by: Julien Grall <julien.grall@arm.com>
Signed-off-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
This patch adds basic support for configuring and assisting virtio-mmio
based virtio-disk backend (emulator) which is intended to run out of
Qemu and could be run in any domain.
Although the Virtio block device is quite different from traditional
Xen PV block device (vbd) from the toolstack's point of view:
- as the frontend is virtio-blk which is not a Xenbus driver, nothing
written to Xenstore are fetched by the frontend currently ("vdev"
is not passed to the frontend). But this might need to be revised
in future, so frontend data might be written to Xenstore in order to
support hotplugging virtio devices or passing the backend domain id
on arch where the device-tree is not available.
- the ring-ref/event-channel are not used for the backend<->frontend
communication, the proposed IPC for Virtio is IOREQ/DM
it is still a "block device" and ought to be integrated in existing
"disk" handling. So, re-use (and adapt) "disk" parsing/configuration
logic to deal with Virtio devices as well.
For the immediate purpose and an ability to extend that support for
other use-cases in future (Qemu, virtio-pci, etc) perform the following
actions:
- Add new disk backend type (LIBXL_DISK_BACKEND_STANDALONE) and reflect
that in the configuration
- Introduce new disk "specification" and "transport" fields to struct
libxl_device_disk. Both are written to the Xenstore. The transport
field is only used for the specification "virtio" and it assumes
only "mmio" value for now.
- Introduce new "specification" option with "xen" communication
protocol being default value.
- Add new device kind (LIBXL__DEVICE_KIND_VIRTIO_DISK) as current
one (LIBXL__DEVICE_KIND_VBD) doesn't fit into Virtio disk model
An example of domain configuration for Virtio disk:
disk = [ 'phy:/dev/mmcblk0p3, xvda1, backendtype=standalone, specification=virtio']
Nothing has changed for default Xen disk configuration.
Please note, this patch is not enough for virtio-disk to work
on Xen (Arm), as for every Virtio device (including disk) we need
to allocate Virtio MMIO params (IRQ and memory region) and pass
them to the backend, also update Guest device-tree. The subsequent
patch will add these missing bits. For the current patch,
the default "irq" and "base" are just written to the Xenstore.
This is not an ideal splitting, but this way we avoid breaking
the bisectability.
Signed-off-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: George Dunlap <george.dunlap@citrix.com>
Tested-by: Jiamei Xie <jiamei.xie@arm.com>
BTC_NO indicates that hardware is not succeptable to Branch Type Confusion.
Zen3 CPUs don't suffer BTC.
This is part of XSA-407.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
libxl__xs_directory() can potentially return NULL without setting `n`.
As `n` isn't initialised, we need to check libxl__xs_directory()
return value before checking `n`. Otherwise, `n` might be non-zero
with `bdfs` NULL which would lead to a segv.
Fixes: 57bff091f4 ("libxl: add 'name' field to 'libxl_device_pci' in the IDL...")
Reported-by: "G.R." <firemeteor@users.sourceforge.net>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Tested-by: "G.R." <firemeteor@users.sourceforge.net>
Introduce a new per-domain creation x86 specific flag to
select whether hardware assisted virtualization should be used for
x{2}APIC.
A per-domain option is added to xl in order to select the usage of
x{2}APIC hardware assisted virtualization, as well as a global
configuration option.
Having all APIC interaction exit to Xen for emulation is slow and can
induce much overhead. Hardware can speed up x{2}APIC by decoding the
APIC access and providing a VM exit with a more specific exit reason
than a regular EPT fault or by altogether avoiding a VM exit.
On the other hand, being able to disable x{2}APIC hardware assisted
virtualization can be useful for testing and debugging purposes.
Note:
- vmx_install_vlapic_mapping doesn't require modifications regardless
of whether the guest has "Virtualize APIC accesses" enabled or not,
i.e., setting the APIC_ACCESS_ADDR VMCS field is fine so long as
virtualize_apic_accesses is supported by the CPU.
- Both per-domain and global assisted_x{2}apic options are not part of
the migration stream, unless explicitly set in the respective
configuration files. Default settings of assisted_x{2}apic done
internally by the toolstack, based on host capabilities at create
time, are not migrated.
Suggested-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Jane Malalane <jane.malalane@citrix.com>
Acked-by: Christian Lindig <christian.lindig@citrix.com>
Reviewed-by: "Roger Pau Monné" <roger.pau@citrix.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: George Dunlap <george.dunlap@citrix.com>
Add XEN_SYSCTL_PHYSCAP_X86_ASSISTED_XAPIC and
XEN_SYSCTL_PHYSCAP_X86_ASSISTED_X2APIC to report accelerated xAPIC and
x2APIC, on x86 hardware. This is so that xAPIC and x2APIC virtualization
can subsequently be enabled on a per-domain basis.
No such features are currently implemented on AMD hardware.
HW assisted xAPIC virtualization will be reported if HW, at the
minimum, supports virtualize_apic_accesses as this feature alone means
that an access to the APIC page will cause an APIC-access VM exit. An
APIC-access VM exit provides a VMM with information about the access
causing the VM exit, unlike a regular EPT fault, thus simplifying some
internal handling.
HW assisted x2APIC virtualization will be reported if HW supports
virtualize_x2apic_mode and, at least, either apic_reg_virt or
virtual_intr_delivery. This also means that
sysctl follows the conditionals in vmx_vlapic_msr_changed().
For that purpose, also add an arch-specific "capabilities" parameter
to struct xen_sysctl_physinfo.
Note that this interface is intended to be compatible with AMD so that
AVIC support can be introduced in a future patch. Unlike Intel that
has multiple controls for APIC Virtualization, AMD has one global
'AVIC Enable' control bit, so fine-graining of APIC virtualization
control cannot be done on a common interface.
Suggested-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Jane Malalane <jane.malalane@citrix.com>
Reviewed-by: "Roger Pau Monné" <roger.pau@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: George Dunlap <george.dunlap@citrix.com>
Acked-by: Christian Lindig <christian.lindig@citrix.com>
Allow administrators to notify a frontend driver that it's backend
counterpart is not to be trusted, so the frontend can deploy whatever
mitigations required in order to secure itself.
Allow such option for disk and network frontends only, as those are
the only hardened ones currently supported.
This is part of XSA-403
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
A leading underscore is used to indicate auto generated headers, and
the clean use of 'rm -f _*.h' will remove those. _xen_list.h also
uses a leading underscore, but is checked in the repo and as such
cannot be removed as part of the clean rule.
Fix this by dropping the leading underscore, so that the header is not
removed.
Fixes: a03b3552d4 ('libs,tools/include: Clean "clean" targets')
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
This new "Makefile.common" is intended to be used by both tools/ and
stubdom/ build system without stubdom needed to use tools/ build
system.
It should contain the necessary list of objects and CFLAGS needed to
build a static library.
Change stubdom/ to check Makefile.common, for the linkfarm.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
For PERL_FLAGS, use make's shell rather than a backquote.
Rather than relying on the VCS to create an empty directory for us,
we can create one before generating the *.c file for the bindings.
Make use of generic variable names to build a shared library from a
source file: CFLAGS, LDFLAGS, and LDLIBS.
To build a shared library, we need to build the source file with
"-fPIC", which was drop by 6d0ec05390 (tools: split libxenstat into
new tools/libs/stat directory).
The source file generated by swig seems to be missing many prototype for
many functions, so we need "-Wno-missing-prototypes" in order to
build it. Also, one of the prototype is deemed malformed, so we also
need "-Wno-strict-prototypes".
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Fix the dependency on the library, $(SHLIB) variable doesn't exist
anymore.
Rework dependency on the include file, we can let `swig` generate the
dependency for us with the use of "-M*" flags.
The xenstat.h file has moved so we need to fix the include location.
Rather than relaying on the VCS to create an empty directory for us,
we can create one before generating the *.c file for the bindings.
Make use of generic variable names to build a shared library from a
source file: CFLAGS, LDFLAGS, and LDLIBS.
Fix python's specific *flags by using python-config, and add them to
generic flags variables: CFLAGS, LDLIBS.
To build a shared library, we need to build the source file with
"-fPIC", which was drop by 6d0ec05390 (tools: split libxenstat into
new tools/libs/stat directory).
The source file generated by swig seems to be missing a prototype for
the "init" function, so we need "-Wno-missing-prototypes" in order to
build it.
Add some targets to .PHONY.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Remove '-Werror -Wmissing-progress -I./include $(CFLAGS_xeninclude)',
those flags are already added via "libs.mk".
Flag "-I." isn't needed, we just need to fix the #include of
"xg_core.h" as this header isn't expected to be installed.
Make use of "-iquote" instead of '-I' for double-quote included
headers.
Also, regroup the CFLAGS into the same place in the makefile.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
It seems a better name. Later, we will introduce LIBX86_OBJS to
collect lib/x86/* objects.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
The only thing done thing done with $(SRCS-y) is to replace ".c" by
".o". It is more useful to collect which object we want to build as
make will figure out how to build it and from which source file.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
There is no need for an extra "cleanlocal" target, we can use
double-colon rules instead.
Generated headers are now in tools/include/, so remove those file
there.
Remove -f flag as it's already in $(RM).
libs.mk:
- don't try to remove "*.rpm" anymore.
libs/light:
- "_paths.*.tmp" isn't created anymore.
- clean "libxenlight_test.so" and "libxl_test_*.opic".
libs/stat:
- don't remove $(DEPS_RM) from here as it is already done in
"libs.mk".
libs/util:
- fix clean of version-script file.
include/xen-foreign:
- remove __pycache__
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
There is no need for an extra "installlocal" target, we can use
double-colon rules instead.
"install-headers" in "libs/store" was introduced for the same reason
that "installlocal" exist, so it is replaced as well.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
LDLIBS is more appropriate and intended to be used to add library
dependencies. APPEND_LDFLAGS wasn't intended to be changed by the
build system.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Commit 92ea9c54fc ("arm/dom0less: assign dom0less guests to cpupools")
introduced a way to start a domain directly on a certain cpupool,
adding a "cpupool_id" member to struct xen_domctl_createdomain.
This was done to be able to start dom0less guests in different pools than
cpupool0, but the toolstack can benefit from it because it can now use
the struct member directly instead of creating the guest in cpupool0
and then moving it to the target cpupool.
Suggested-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Luca Fancellu <luca.fancellu@arm.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
libxl is leaking self pipes to child processes. These can be seen when
running with env var _LIBXL_DEBUG_EXEC_FDS=1:
libxl: debug: libxl_aoutils.c:593:libxl__async_exec_start: forking to execute: /etc/xen/scripts/vif-bridge online
[Detaching after fork from child process 5099]
libxl: execing /etc/xen/scripts/vif-bridge: fd 4 is open to pipe:[46805] with flags 0
libxl: execing /etc/xen/scripts/vif-bridge: fd 13 is open to pipe:[46807] with flags 0
libxl: execing /etc/xen/scripts/vif-bridge: fd 14 is open to pipe:[46807] with flags 0
libxl: execing /etc/xen/scripts/vif-bridge: fd 19 is open to pipe:[48570] with flags 0
libxl: execing /etc/xen/scripts/vif-bridge: fd 20 is open to pipe:[48570] with flags 0
(fd 3 is also open, but the check only starts at 4 for some reason.)
For xl, this is the poller created by libxl_ctx_alloc, the poller
created by do_domain_create -> libxl__ao_create, and the self pipe for
libxl__sigchld_needed. Set CLOEXEC on the FDs so they are not leaked
into children.
Signed-off-by: Jason Andryuk <jandryuk@gmail.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Make the do_memory_op function accessible to tools linking with libxc.
Similar functions are already available for both domctl and sysctl. As part
of this patch we also change the input 'cmd' to be unsigned int to accurately
reflect what the hypervisor expects.
Signed-off-by: Tamas K Lengyel <tamas.lengyel@intel.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
libxl_domain_setmaxmem() called during "xl mem-max" should update the
domain's memory/static-max Xenstore node, as otherwise "xl mem-set"
won't be able to set the memory size to the new maximum.
Adjust the related comments and documentation accordingly.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Add monitor event that hooks the vmexit handler allowing for both sync and
async monitoring of events. With async monitoring an event is placed on the
monitor ring for each exit and the rest of the vmexit handler resumes normally.
If there are additional monitor events configured those will also place their
respective events on the monitor ring.
With the sync version an event is placed on the monitor ring but the handler
does not get resumed, thus the sync version is only useful when the VM is not
expected to resume normally after the vmexit. Our use-case is primarily with
the sync version with VM forks where the fork gets reset after sync vmexit
event, thus the rest of the vmexit handler can be safely skipped. This is
very useful when we want to avoid Xen crashing the VM under any circumstance,
for example during fuzzing. Collecting all vmexit information regardless of
the root cause makes it easier to reason about the state of the VM on the
monitor side, hence we opt to receive all events, even for external interrupt
and NMI exits and let the monitor agent decide how to proceed.
Signed-off-by: Tamas K Lengyel <tamas.lengyel@intel.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Need to separately specify if the reset is for the memory or for the VM state,
or both.
Signed-off-by: Tamas K Lengyel <tamas.lengyel@intel.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Expose the MCDT_NO CPUID flag to guests if available. The bit signals
that the CPU does not exhibit MCDT behavior, and as such can be
exposed without requiring any additional work.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
With the introduction of boot time cpupools, Xen can create many
different cpupools at boot time other than cpupool with id 0.
Since these newly created cpupools can't have an
entry in Xenstore, create the entry using xen-init-dom0
helper with the usual convention: Pool-<cpupool id>.
Given the change, remove the check for poolid == 0 from
libxl_cpupoolid_to_name(...).
Signed-off-by: Luca Fancellu <luca.fancellu@arm.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
The reference "to shadow the resident processes" is applicable to
domains (potentially) running in shadow mode only. Adjust the
calculations accordingly. This, however, requires further parameters.
Since the original function is deprecated anyway, and since it can't be
changed (for being part of a stable ABI), introduce a new (internal
only) function, with the deprecated one simply becoming a wrapper.
In dom0_paging_pages() also take the opportunity and stop open-coding
DIV_ROUND_UP().
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
PCI device assignment to an HVM with stubdom is potentially racy. First
the PCI device is assigned to the stubdom via the PV PCI protocol. Then
QEMU is sent a QMP command to attach the PCI device to QEMU running
within the stubdom. However, the sysfs entries within the stubdom may
not have appeared by the time QEMU receives the device_add command
resulting in errors like:
libxl_qmp.c:1838:qmp_ev_parse_error_messages:Domain 10:Could not open '/sys/bus/pci/devices/0000:00:1f.3/config': No such file or directory
This patch retries the device assignment up to 10 times with a 1 second
delay between. That roughly matches the overall hotplug timeout for
pci_add_timeout. pci_add_timeout's initialization is moved to
do_pci_add since retries call into pci_add_qmp_device_add again.
The qmp_ev_parse_error_messages error is still printed since it happens
at a lower level than the pci code controlling the retries. With that,
the "Retrying PCI add %d" message is also printed at ERROR level to
clarify what is happening.
Signed-off-by: Jason Andryuk <jandryuk@gmail.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Juergen Gross
Anthony PERARD
Henry Wang
Oleksandr Andrushchenko
Jan Beulich
Oleksandr Tyshchenko
Julien Grall
Andrew Cooper
Jane Malalane
Roger Pau Monne
Luca Fancellu
Jason Andryuk
Tamas K Lengyel