This expands the format to include the class of TRC_HW_IRQ.
This means that instead of:
CPU28 1753521436727 (+ 3252) unknown (0x0000000000802008) [ 0x0000006c 0x4605709c 0x4605b682 0x00000000 0x00000000 0x00000000 0x00000000 ]
we now see:
CPU28 1753521436727 (+ 3252) do_irq [ irq = 108, began = 1174761628us, ended = 1174779522us ]
Acked-by: George Dunlap <george.dunlap@eu.citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Makes the following changes to the vnc generation code:
* Simplifies and comments it, making it easier to read and grok
* Throws an error if duplicate values of display are set, rather
than the current very un-intuitive behavior.
Signed-off-by: George Dunlap <george.dunlap@eu.citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Re-start blktap2 IPC select call on interrupt.
We hunted this miserable bug for a long time.
The teardown of a blktap2 tapdisk instance is being carried out
inconsistently up to and including the 4.2.1 release. The
problem appears to be a classic 'Heisenbug' which disappears if a
single function call is added to the tapdisk shutdown path. It
is likely this bug has been in existence for the life of the
blktap2 code.
Control messages to manipulate a tapdisk instance are sent over a
UNIX domain socket. A select call is used on both the read and
write paths to wait on I/O and to set a timeout for the
transmission and reception of the control plane messages.
The existing code fails receipt or transmission of the control message
on any type of error return from the select call. The xl control
process receives an interrupt while waiting in the select call which
in turn causes an error return with SIGINT as the return code.
This prematurely terminates the teardown of the tapdisk instance
leaving it in various states of shutdown. Since multiple messages
are needed to implement a full teardown the tapdisk instance can be
left in various states ranging from fully connected to only the minor
being left allocated.
The fix is straight forward. Check the return code from the
select call and re-try read or write of the control message if
errno is sent to EINTR. The problem manifests itself in the read
path but there appears to be little reason to not add the fix to
the write path as well. Both paths appear to be cut-and-paste
copies of each other.
Signed-off-by: Dr. Greg Wettstein <greg@enjellic.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
libxl_create.c: In function ‘libxl__domain_build_info_setdefault’:
libxl_create.c:109: error: ‘info’ undeclared (first use in this function)
libxl_create.c:109: error: (Each undeclared identifier is reported only once
libxl_create.c:109: error: for each function it appears in.)
cc1: warnings being treated as errors
libxl_create.c:108: error: suggest explicit braces to avoid ambiguous ‘else’
libxl_create.c: At top level:
libxl_create.c:141: error: expected identifier or ‘(’ before ‘if’
...
Fix is to insert the missing opening brace and s/info/b_info/ in one spot.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
The stat in libxl__domain_build_info_setdefault's default device model
logic works to fall back to qemu-xen-traditional whenever the
executable for qemu-xen is not found.
We are going to use qemu-xen-traditional in more cases, so break this
check out into its own if statement.
Also add a pair of braces to make the if() statement symmetrical.
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
When adding a disk don't launch multiple tapdisk instances for the
same disk, if transaction fails in device_disk_add reuse the same
tapdisk for further tries instead of creating a new instance each
time a transaction fails.
Reported-by: Darren Shepherd <darren.s.shepherd@gmail.com>
Signed-off-by: Roger Pau Monne <roger.pau@citrix.com>
Tested-by: Darren Shepherd <darren.s.shepherd@gmail.com>
This is a regression introduced by
"Switch from select() to poll() in xenconsoled's IO loop."
hg c/s 26405:7359c3122c5d
git cc5434c933
which results in reliable segfaults during VM power operations.
Switch to calloc(3) in an effort to avoid similar problems with changes in the
future.
Signed-off-by: Marcus Granado <marcus.granado@citrix.com>
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
As suggested by IanJ:
Check isatty only once to preserve the errno of ->progress users, and to
reduce the noice in strace output.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
The assertion only allows values of 1 (no_delay_for_missed_ticks)
up to 3 (one_missed_tick_pending). It should be possible to
use the value of 0 (delay_for_missed_ticks) for the timer configuration
option.
Acked-by: Ian Campbell <ian.cambell@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
When building the foreign headers on x86_32 we use '#pragma pack(4)' and
therefore need to explicitly align types which should be aligned to 8-byte
boundaries.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
This patch enables the compilation of the FLASK policy as part of the
tools build if the needed prerequisites are present.
Signed-off-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
This adds the ability to define security classes and access vectors in
FLASK policy not defined by the hypervisor, for the use of stub domains
or applications without their own security policies.
Signed-off-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
For the example policy shipped with Xen, it makes sense to allow dom0
access to all system calls so that policy does not need to be updated
for each new hypervisor or toolstack feature used.
Signed-off-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
tools/xend: Only add cpuid and cpuid_check to sexpr once
When converting a XendConfig object to sexpr, cpuid and cpuid_check
were being emitted twice in the resulting sexpr. The first conversion
writes incorrect sexpr, causing parsing of the sexpr to fail when xend
is restarted and domain sexpr files in /var/lib/xend/domains/<dom-uuid>
are read and parsed.
This patch skips the first conversion, and uses only the custom
cpuid{_check} conversion methods called later. It is not pretty, but
is the least invasive fix in this complex code.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
struct cpu_user_regs is currently used as both internal state
(specifically at the base of the stack) and a guest/toolstack
visible API (via struct vcpu_guest_context used by
XEN_DOMCTL_{g,s}etvcpucontext and VCPUOP_initialise).
This causes problems when we want to make the API 64-bit clean since
we don't really want to change the size of the on-stack struct.
So split into vcpu_guest_core_regs which is the API facing struct
and keep cpu_user_regs purely internal, translate between the two.
In the user API arrange for both 64- and 32-bit registers to be
included in a layout which does not differ depending on toolstack
architecture. Also switch to using the more formal banked register
names (e.g. with the _usr suffix) for clarity.
This is an ABI change. Note that the kernel doesn't currently use
this data structure so it affects the tools interface only.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Tim Deegan <tim@xen.org>
Texinfo 5 breaks QEMU builds. As we do not need documents from QEMU, just
disable it.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Tested-by: jacek burghardt <jaceksburghardt@gmail.com>
This device was removed due to change in specifications.
Original patch written by Paul Durrant
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Signed-off-by: Frediano Ziglio <frediano.ziglio@citrix.com>
First draft specification document it as a 64bit counter, now are a 128bit
value handled as a couple of 64bit values.
Allow to disable the device is values are all zeroes.
Add documentation for platform/generation-id key.
Signed-off-by: Frediano Ziglio <frediano.ziglio@citrix.com>
The emacs variable to set the C style from a local variable block is
c-file-style, not c-set-style.
Signed-off-by: David Vrabel <david.vrabel@citrix.com
aab4d1b266 "libxl: Add qxl vga interface support for upstream qemu"
introduced:
libxl_dm.c: In function ‘libxl__build_device_model_args_new’:
libxl_dm.c:449: error: format ‘%lu’ expects type ‘long unsigned int’, but argument 3 has type ‘long long unsigned int’
libxl_dm.c:451: error: format ‘%lu’ expects type ‘long unsigned int’, but argument 3 has type ‘long long unsigned int’
on arm32 and x86_32.
Use the inttypes.h PRId64 macro.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
- If videoram setting is less than 8 mb shows error and exit.
- Added videoram setting for qemu upstream with cirrus (added in qemu 1.3).
- Updated xl.cfg man.
- Default and minimal videoram changed to 16 mb if stdvga is set and upstream
qemu is being used. This is required by qemu 1.4 to avoid a xen memory error
(qemu 1.3 doesn't complain about it, probably buggy).
Signed-off-by: Fabio Fantoni <fabio.fantoni@heliman.it>
Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Committed-by: Ian Campbell <ian.campbell@citrix.com>
Usage:
vga="stdvga"|"cirrus"
- Default option is cirrus.
- Prints error and exit if unknown value is passed.
- stdvga parameter is now deprecated.
- Updated xl.cfg man.
Signed-off-by: Fabio Fantoni <fabio.fantoni@heliman.it>
Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Committed-by: Ian Campbell <ian.campbell@citrix.com>
Move tsc, rtc, memmap_limit, localtime and shadow settings from
libxl__build_pre to libxl__arch_domain_create.
Get the console and xenstore pfn's from struct xc_dom_image for
autotranslated guests.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Ian Campbell <ian.campbell@citrix.com>
Make xc_dom_feature_translated an arch-dependent function.
alloc_magic_pages: save console and xenstore pfn's in xc_dom_image.
alloc_magic_pages: set HVM_PARAM_CONSOLE_EVTCHN and
HVM_PARAM_STORE_EVTCHN hvm_params using the event channels allocated by
the toolstack.
Call xc_dom_gnttab_hvm_seed instead of xc_dom_gnttab_seed in
xc_dom_gnttab_init for autotranslated guests.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Ian Campbell <ian.campbell@citrix.com>
This patch introduces support for two new parameters in libxl:
smbios_firmware=<path_to_smbios_structures_file>
acpi_firmware=<path_to_acpi_tables_file>
The changes are primarily in the domain building code where the firmware files
are read and passed to libxc for loading into the new guest. After the domain
building call to libxc, the addresses for the loaded blobs are returned and
written to xenstore.
LIBXL_HAVE_FIRMWARE_PASSTHROUGH is defined in libxl.h to allow users to
determine if the feature is present.
This patch also updates the xl.cfg man page with descriptions of the two new
parameters for firmware passthrough.
Signed-off-by: Ross Philipson <ross.philipson@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Ian Campbell <ian.campbell@citrix.com>
libxl_domain_suspend is already prepared to handle LIBXL_SUSPEND_DEBUG,
and xl migrate handles the -d switch as well. Pass this flag down to
libxl_domain_suspend, so that finally xc_domain_save can dump huge
amount of debug data to stdout.
Update xl.1 and help text output.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Ian Campbell <ian.campbell@citrix.com>
Konrad Rzeszutek Wilk
Wei Liu
George Dunlap
Dr. Greg Wettstein
fantonifabio@tiscali.it
Roger Pau Monne
Ian Campbell
Stefano Stabellini
Ian Jackson
Andrew Cooper
Olaf Hering
Daniel De Graaf
Frediano Ziglio
David Vrabel
Fabio Fantoni
Ian Campbell
Lalith Suresh
Ross Philipson