this patch fixes a couple of issues with pci passthrough in xend,
previously reported by Cui Dexuan.
The main problem is that xc_assign_device is called only for the first
device hotplugged into the guest and not the followings.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Alphabetize object files and guest config options for better
readability. Also remove svm interrupt prototypes which do not
exist.
Signed-off-by: Christoph Egger <Christoph.Egger@amd.com>
XenAPI (not xapi) has supported only LUN assignment mode for pvSCSI.
But at last, HOST assignment mode also is supported by these patches.
To support HOST assignment mode, these patches add PSCSI_HBA class
and DSCSI_HBA class to XenAPI.
Signed-off-by: Masaki Kanno <kanno.masaki@jp.fujitsu.com>
Blktap2 port of remus disk driver. Backwards compatable with blktap1
implementation.
Signed-off-by: Ryan O'Connor <rjo@cs.ubc.ca>
Signed-off-by: Brendan Cully <brendan@cs.ubc.ca>
The tail containing the final PFN table, VCPU contexts and
shared_info_page is buffered, then the read loop is restarted.
After the first pass, incoming pages are buffered until the next tail
is read, completing a new consistent checkpoint. At this point, the
memory changes are applied and the loop begins again. When the fd read
fails, the tail buffer is processed.
Signed-off-by: Brendan Cully <brendan@cs.ubc.ca>
This patch fixes the recent regressions pointed out by Dexuan, keeping
pci passthrough working with stubdom too. In particular calling
device_create when pci_state == 'Initialising' is a mistake because
the state is always Initialising when attaching a device while
device_create has too be called only when the pci backend is missing.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
The pause and unpause paths are currently broken due to a missing
slash. I took advantage of the opportunity to remove code repetition,
repeated strings that should point to the proper constants, etc
From: Andres Lagar Cavilla <andreslc@cs.toronto.edu>
Signed-off-by: Keir Fraser <keir.fraser@citrix.com>
This patch exposes the getenforce and setenforce functionality for the
Flask XSM module.
Signed-off-by : Machon Gregory <mbgrego@tycho.ncsc.mil>
Signed-off-by : George S. Coker, II <gscoker@alpha.ncsc.mil>
This patch adds securty checks for pci passthrough related hypercalls
to enforce that the current domain owns the resources that it is about
to remap. It also adds a call to xc_assign_device to xend and removes
the PRIVILEGED_STUBDOMS flags.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
1. Calling VDB.set_bootable(True) results in string 'True' in managed
config file. After xend restart, conversion int(bootable) in
server/blkif.py fails.
2. selection of bootable disks in XendDomainInfo.py requires
type(bootable) == int not str, otherwise all disks are taken as
bootable.
This patch converts the bootable flag always to int.
Signed-off-by: Lutz Dube <Lutz.Dube@ts.fujitsu.com>
This patch fixes the circular dependency problem in the toolstack that
prevented pci coldplug from working with stubdoms: after creating the
stubdom we wait for it to be properly initialized before going
further. We release the domain lock while we wait.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
The new nomigrate option can be set to non-zero in vm.cfg
(for both hvm and pvm) to disallow a guest from being
migrated or restored. (Save is still allowed for the purpose
of checkpointing.) The option persists into a save file
and is also communicated into the hypervisor, the latter
for the purposes of a to-be-added hypercall for communicating
to guests that migration is disallowed (which will be
used initially for userland TSC-related sensing, but may
find other uses).
Signed-off-by: Dan Magenheimer <dan.magenheimer@oracle.com>
We can destroy a VDI by VDI.destroy even if the VDI is being used
to VBDs. This patch checks that the VDI is not used to VBDs.
Signed-off-by: Masaki Kanno <kanno.masaki@jp.fujitsu.com>
When the option pci-passthrough-strict-check of
/etc/xen/xend-config.sxp is set to 'no', we don't check the
non-page-aligned MMIO BAR. This could be useful in some cases, e.g.,
when there is only 1 device in the range of the page and we try to
assign the device to pv guest.
Signed-off-by: Dexuan Cui <dexuan.cui@intel.com>
Add a new option "description=" to each VM to increase the
manageability of VM, which could be accessed via "xm list -l
MACHINE".e.g add "description='(name, james),(priority 5), (owner
james.song@company.com)'" to configure file, User can get the VM's
attribute easily by "xm list -l Machine" or some tools.
Signed-off-by: James Song<jsong@novell.com>
In XenAPI mode, when we start a VM by using xm create command, VDIs
are always automatically created for VBDs. Once we shut down the
VM, then start the VM again, then VDIs are newly created. As a
result, a vdi.xml file continues to expand.
This patch reuses VDIs if location of the VDIs is same.
Signed-off-by: Masaki Kanno <kanno.masaki@jp.fujitsu.com>
This patch makes the destruction of stubdoms a synchronous event,
therefore it is no longer possible to run out of memory when rebooting
a guest because the stubdom of the old guest is always destroyed
before the creation of the new guest.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
This patch adds a new option to xm migrate command. A concept of the
option is inspired from XenServer/XenCenter. The concept is "Change
home server (affinity)." The option name is "change_home_server."
Currently, a config.sxp file of a managed domain is not migrated to a
destination server even if the migration of the managed domain
succeeds. The config.sxp file is kept in a source server.
By the patch, the config.sxp file is migrated with the managed domain.
The config.sxp file is unregistered from the source server, then the
config.sxp file is registered to the destination server.
BTW, should the config.sxp file be always migrated without the option?
If the managed domain is migrated without the option, the managed
domains exist on both the source server and the destination server.
(Of course, the managed domain on the source server is "halted" state,
and the managed domain on the destination server is "running" state.)
Is it good that the managed domains with a same UUID exist on both
servers? (In the patch, I added the option for compatible.)
Signed-off-by: Masaki Kanno <kanno.masaki@jp.fujitsu.com>
Whenever pci_device_configure is called on a guest that has a stubdom,
call pci_device_configure on the stubdom as well.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
This patch allows a pci device to be passed through an HVM guest and
its own stubdom at the same time.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
I detected problems of VDI-VBD link again.
- In the case of inactive managed domains, VDI->VBD link was lost
by xend restarting (or host OS rebooting).
- In the case of active domains, both VDI->VBD link and VBD->VDI
link were lost by xend restarting.
When xend is restarted, information of VDI instances is restored from
a vdi.xml file. But the vdi.xml file does not have UUID of VBD
because xend does not write the UUID to the vdi.xml file. Therefore,
VDI->VBD link is lost. When xend is restarted, information of VBD
instances is restored from xenstore. But xenstore does not have UUID
of VDI. Therefore, VBD->VDI link is lost.
This patch solves the problems. VDI instances stop having UUID of
VBD. Instead, xend gathers UUID of VBD each time it's required. The
method is the same as Network->VIF link. Information of VBD instances
is restored not only from xenstore but from a config.sxp file. UUID
of VDI is restored from the config.sxp file.
FYI, VBD->VDI link of inactive managed domains is not lost because
information of VBD instances is restored from the config.sxp file.
UUID of VDI is written by xend to the config.sxp file.
Signed-off-by: Masaki Kanno <kanno.masaki@jp.fujitsu.com>
During testing I discovered that using a bootloader magically clears
the superpage flag out of the config. This small patch fixes that
behavior.
From: Dave McCracken <dcm@mccr.org>
Signed-off-by: Keir Fraser <keir.fraser@citrix.com>
Updated xm setpolicy command to support the loading of flask security
policies.
Signed-off-by : Machon Gregory <mbgrego@tycho.ncsc.mil>
Signed-off-by : George S. Coker, II <gscoker@alpha.ncsc.mil>
Temporary tuple0 python object was not freed at the end of
xspy_set_permissions() in case no error occurred. To reduce code
duplication, this path reuses the cleanup code.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reference counters are not correctly decreased for python object in
several places in python bindings for libxc. Most of them are around
PyList_Append(), which unlike PyList_SetItem() does increment
reference counter of the object being added to a list.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Platform variable 'tsc_native' is saved/restored as a string, so must
be converted to an integer before passing to domain_set_tsc_native().
Signed-off-by: Keir Fraser <keir.fraser@citrix.com>
The default is to emulate. Old saved images will be restored with
legacy behaviour however (native TSC, no emulation).
Signed-off-by: Dan Magenheimer <dan.magenheimer@oracle.com>
Signed-off-by: Keir Fraser <keir.fraser@citrix.com>
VBD information in xend does not have a VDI value if XenAPI mode
is invalid. A new patch confirms the VDI value is valid. So, the new
patch cuts off VDI->VBD links if the VDI value is valid.
Signed-off-by: Masaki Kanno <kanno.masaki@jp.fujitsu.com>
When VBD instances are destroyed by xm delete command, VDI
instances keep linking to the VBD instances unilaterally.
Signed-off-by: Masaki Kanno <kanno.masaki@jp.fujitsu.com>
Keir Fraser