The original rule to target "distclean" in tools/Rules.mk was in effect
"make clean". It should be "make distclean".
However not all Makefiles in subdirectories have distclean target
defined. So this patch also adds a bunch of distclean targets to various
Makefiles. They only depend on clean target and don't have any actions
in most cases.
With the patch applied, following command outputs 0 results:
find tools -name 'Makefile*' -exec grep -L 'distclean' {} \+ \
| grep -v ocaml | grep -v libfsimage
Ocaml and libfsimage are known to have distclean defined in a dedicated
rules file.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
The error handling from a failed memory allocation should return
PyErr_SetFromErrno(xc_error_obj); rather than simply calling it and continuing
to the memcpy() below, with the dest pointer being NULL.
Coverity also complains about passing a non-NUL terminated string to
xc_flask_context_to_sid(). xc_flask_context_to_sid() doesn't actually take a
NUL terminated string, but it does take a char* which, in context, used to be
a string, which is why Coverity complains.
One solution would be to use strdup(ctx) which is simpler than a
strlen()/malloc()/memcpy() combo, which would result in a NUL-terminated
string being used with xc_flask_context_to_sid().
However, ctx is strictly an input to the hypercall and is not mutated along
the way. Both these issues can be fixed, and the error logic simplified, by
not duplicating ctx in the first place.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Coverity-IDs: 1055305 1055721
Acked-by: Ian Campbell <Ian.Campbell@citrix.com>
CC: Ian Jackson <Ian.Jackson@eu.citrix.com>
CC: Wei Liu <wei.liu2@citrix.com>
CC: Xen Coverity Team <coverity@xen.org>
Don't leak a 16k allocation if PyArg_ParseTupleAndKeywords() or the first
xc_readconsolering() fail. It is trivial to run throught the processes memory
by repeatedly passing junk parameters to this function.
In the case that the call to xc_readconsolering() in the while loop fails,
reinstate str before breaking out, and passing a spurious pointer to free().
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Coverity-IDs: 1054984 1055906
CC: Ian Campbell <Ian.Campbell@citrix.com>
CC: Ian Jackson <Ian.Jackson@eu.citrix.com>
CC: Wei Liu <wei.liu2@citrix.com>
CC: Xen Coverity Team <coverity@xen.org>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Also moves xc_dom.h to include as it is used often by other xen tools.
Use the new include subdirectories to build Xen tools, qemu-xen and
stubdoms.
Add the old libxc include path to the programs that need it to build,
on a case by case basis and commeting that they shouldn't require
internal libxc headers to build.
[ And: update QEMU_TRADITIONAL_REVISION to corresponding qemu patch
- Ian jackson ]
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
The directory tools/python/xen/util does not exist.
Upcoming changes to genpath will fail if the rule persists.
Nothing uses path.py (anymore?), so get rid it.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
[ ijc -- removed from .gitignore too ]
HVMOP_get_param and HVMOP_set_param take a uint32_t for the parameter
index and a uint64_t for the value. So add xc_hvm_param_get() and
xc_hvm_param_set() that take the same types.
The existing xc_get_hvm_param() and xc_set_hvm_param() are retained
for compatibility but are deprecated.
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
[ ijc -- dropped one hunk against xen-access.c which didn't apply due to
intervening changes ]
by using the flag and the new cpumap arguments introduced in
the parameters of the DOMCTL_{get,set}_vcpuaffinity hypercalls.
Now, both xc_vcpu_setaffinity() and xc_vcpu_getaffinity() have
a new flag parameter, to specify whether the user wants to
set/get hard affinity, soft affinity or both. They also have
two cpumap parameters instead of only one. This way, it is
possible to set/get both hard and soft affinity at the same
time (and, in case of set, each one to its own value).
In xc_vcpu_setaffinity(), the cpumaps are IN/OUT parameters,
as it is for the corresponding arguments of the
DOMCTL_set_vcpuaffinity hypercall. What Xen puts there is the
hard and soft effective affinity, that is what Xen will actually
use for scheduling.
In-tree callers are also fixed to cope with the new interface.
Signed-off-by: Dario Faggioli <dario.faggioli@citrix.com>
Acked-by: George Dunlap <george.dunlap@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Nothing in scripts/ is referenced by the current Xen build system. It is a
legacy version of the XenAPI bindings, other parts of which have already been
removed from the tree.
Additionally, prevent the install target from creating an $(SBINDIR) directory
but putting nothing in it. This appears to be something missed when removing
Xend.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
CC: Ian Campbell <Ian.Campbell@citrix.com>
CC: Ian Jackson <Ian.Jackson@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
I've retained xen.lowlevel.{xc,xs} since they seem more widely useful. I also
kept xen.lowlevel.xl even though it is disabled by default and IMHO useless in
its current form.
I've tried to clean up the various associated bits like example configs, init
scripts, udev rules etc but no doubt I have missed something, those can easily
be cleaned up later.
I've also removed xm-test since although it could in theory be reworked to
test xl it hasn't been touched for years. If someone wants to resurrect it
then they could do so via the git history.
This has been built but not runtime tested.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
---
v2: Clean out some .*ignore cruft
Remove some xm/xend docs.
Attaching a CDROM device with 'xm scsi-attach domU /dev/sr0 0:0:0:0'
fails because for some reason the sr driver was not handled at all in
the match list. With the change the above command succeeds and the
device is attached.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Matt Wilson <msw@amazon.com>
The two assert in restore trigger sometimes after hundreds of
migrations. If they trigger the destination host will not destroy the
newly created, yet empty guest. After a second migration attempt to this
host there will be two guets with the same name and uuid. This situation
is poorly handled by the xm tools.
With this change the empty guest will be destroyed.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Matt Wilson <msw@amazon.com>
open a vhd file failed
For example:
[root@dom0_134_103 ~]# xm block-attach 0
tap2:tapdisk:vhd:/root/liyi***.vhd /dev/xvdz w
Error: ('create', '-avhd:/root/liyi***.vhd') failed (512 )
Usage: xm block-attach <Domain> <BackDev> <FrontDev> <Mode> [BackDomain]
Create a new virtual block device.
[root@dom0_134_103 ~]# xm block-attach 0
tap2:tapdisk:vhd:/root/liyi.vhd /dev/xvdz w
Error: The device "/dev/xvdz" is already defined
Usage: xm block-attach <Domain> <BackDev> <FrontDev> <Mode> [BackDomain]
Create a new virtual block device.
Signed-off-by: Yi Li <peteryili@tencent.com>
Acked-by: Matt Wilson <msw@amazon.com>
Use fcntl F_SETLK, rather than writing our pid into a "lock" file.
That way if we crash we don't leave the lockfile lying about. Callers
now need to keep the fd for our lockfile. (We don't use flock because
we don't want anyone who inherits this fd across fork to end up with a
handle onto the lock.)
While we are here:
* Move the lockfile to /var/run/xen
* De-duplicate the calculation of the pathname
* Compute the buffer size for the pathname so that it will definitely
not overrun (and use the computed value everywhere)
* Fix various error handling bugs
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
CC: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Shriram Rajagopalan <rshriram@cs.ubc.ca>
xc_suspend_evtchn_init expects to eat the first event on the xce. If
the xce is used for any other purpose then this can break. Document
this fact and rename the function to xc_suspend_evtchn_init_exclusive.
(I haven't checked the call sites for improper shared use of the xce.)
Provide a corresponding xc_suspend_evtchn_init_sane which doesn't try
to eat an event, and instead leaves the caller the ability to
demultiplex.
Also document that xc_await_suspend needs exclusive use of the xce.
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
CC: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
CC: Shriram Rajagopalan <rshriram@cs.ubc.ca>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
---
v3: Drop spurious addition of #include <assert.h>
When created new guest on NUMA server, xend tried to get the best node
by calculated all vcpus info, if domain already be terminated then
getVCPUInfo() will throw below exception and guest start failed:
[2013-09-04 20:01:26 6254] ERROR (XendDomainInfo:496) VM start failed
Traceback (most recent call last):
File "/usr/lib64/python2.4/site-packages/xen/xend/XendDomainInfo.py", line 482, in start
XendTask.log_progress(31, 60, self._initDomain)
File "/usr/lib64/python2.4/site-packages/xen/xend/XendTask.py", line 209, in log_progress
retval = func(*args, **kwds)
File "/usr/lib64/python2.4/site-packages/xen/xend/XendDomainInfo.py", line 2918, in _initDomain
node = self._setCPUAffinity()
File "/usr/lib64/python2.4/site-packages/xen/xend/XendDomainInfo.py", line 2835, in _setCPUAffinity
best_node = find_relaxed_node(candidate_node_list)[0]
File "/usr/lib64/python2.4/site-packages/xen/xend/XendDomainInfo.py", line 2803, in find_relaxed_node
cpuinfo = dom.getVCPUInfo()
File "/usr/lib64/python2.4/site-packages/xen/xend/XendDomainInfo.py", line 1600, in getVCPUInfo
raise XendError(str(exn))
XendError: (3, 'No such process')
This patch will check return value of xc.vcpu_getinfo() and make sure the
error not caused by domain died before throw the exception.
Signed-off-by: Joe Jin <joe.jin@oracle.com>
Acked-by: Matt Wilson <msw@amazon.com>
Cc: Keir Fraser <keir@xen.org>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Roger Pau Monne <roger.pau@citrix.com>
In libxc, make xc_get_max_{cpus,node}() always return either a
positive number or -1, and change all the callers to deal with
that.
In libxl, make libxl_get_max_{cpus,nodes}() always return either a
positive number or a libxl error code. Thanks to that, it is also
possible to fix loggig for libxl_{cpu,node}_bitmap_alloc(), which
now happens inside the functions themselves, more accurately
reporting what happened.
Signed-off-by: Dario Faggioli <dario.faggioli@citrix.com>
Acked-by: George Dunlap <george.dunlap@eu.citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Commit 00a4b65f85 Sep 7 2010
"libxc: provide notification of final checkpoint to restore end"
broke migration from any version of Xen using tools from prior to that commit
Older tools have no idea about an XC_SAVE_ID_LAST_CHECKPOINT, causing newer
tools xc_domain_restore() to start reading the qemu save record, as
ctx->last_checkpoint is 0.
The failure looks like:
xc: error: Max batch size exceeded (1970103633). Giving up.
where 1970103633 = 0x756d6551 = *(uint32_t*)"Qemu"
With this fix in place, the behaviour for normal migrations is reverted to how
it was before the regression; the migration is considered non-checkpointed
right from the start. A XC_SAVE_ID_LAST_CHECKPOINT chunk seen in the
migration stream is a nop. For checkpointed migrations the behaviour is
unchanged.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Ian Campbell <Ian.Campbell@citrix.com>
CC: Ian Jackson <Ian.Jackson@eu.citrix.com>
Acked-by: Shriram Rajagopalan <rshriram@cs.ubc.ca> (Remus bits)
Add big warnings to configure, xend initscript and xm.
The big xm warning is displayed once (per boot, or per tmpreaper clean),
afterwards a single line warning is displayed.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
A file descriptor leak was detected after creating multiple domUs with
pass-through PCI devices. This patch fixes the issue.
Signed-off-by: Xi Xiong <xixiong@amazon.com>
Reviewed-by: Matt Wilson <msw@amazon.com>
[msw: adjusted commit message]
Signed-off-by: Matt Wilson <msw@amazon.com>
Newer PCI standards (e.g., PCI-X 2.0 and PCIe) introduce extended
configuration space which is larger than 256 bytes. This patch uses
stat() to determine the amount of space used to correctly save all of
the PCI configuration space. Resets handled by the xen-pciback driver
don't have this problem, as that code correctly handles saving
extended configuration space.
Signed-off-by: Steven Noonan <snoonan@amazon.com>
Reviewed-by: Matt Wilson <msw@amazon.com>
[msw: adjusted commit message]
Signed-off-by: Matt Wilson <msw@amazon.com>
I'm not even sure what this thing is. Looks like some sort of Twisted Python
based frontend to xend.
Whatever it is I am perfectly sure no one can be using it. Apart from drive by
build fixes caused by updates elsewhere it has seen no real development since
2005. I suspect it was never even finished/usable.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
This was apparently a Qt xenstore viewer. It hasn't been touched since it was
first committed in 2007 and I can't beleive anyone is actually using even if
it still happens to work.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Matt Wilson <msw@amazon.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
xend has been deprecated for 2 releases now. Lets make it possible to not even
build it.
For now I'm leaving the default of on but I would like to change that before
the 4.4 release.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Matt Wilson <msw@amazon.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
When support for pinning more than 64 cpus was added, check for cpu
out-of-range values was removed. This can lead to subsequent
out-of-bounds cpumap array accesses in case the cpu number is higher
than the actual count.
This patch returns the check.
This is CVE-2013-2072 / XSA-56
Signed-off-by: Petr Matousek <pmatouse@redhat.com>
The hypervisor side changes for XSA-46 require the tool stack to now
always map the guest pIRQ before granting access permission to the
underlying host IRQ (GSI). This in particular requires that pciif.py
no longer can skip this step (assuming qemu would do it) for HVM
guests.
This in turn exposes, however, an inconsistency between xend and qemu:
The former wants to always establish 1:1 mappings between pIRQ and host
IRQ (for non-MSI only of course), while the latter always wants to
allocate an arbitrary mapping. Since the whole tool stack obviously
should always agree on the mapping model, make libxc enforce the 1:1
mapping as the more natural one (as well as being the one that allows
for easier debugging, since there no need to find out the extra
mapping). Users of libxc that want to establish a particular (rather
than an allocated) mapping are still free to do so, as well as tool
stacks not based on libxc wanting to implement an allocation based
model (which is why it's not the hypervisor that's being changed to
enforce either model).
Since libxl, like xend, already uses a 1:1 model, it's unaffected by
the libxc change (and it being unaffected by the original hypervisor
side changes is - afaict - simply due to qemu getting spawned at a
later point in time compared to the xend event flow).
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Tested-by: Andreas Falck <falck.andreas.lists@gmail.com> (on 4.1)
Tested-by: Gordan Bobic <gordan@bobich.net> (on 4.2)
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
- properly revoke IRQ access in map_domain_pirq() error path
- don't permit replacing an in use IRQ
- don't accept inputs in the GSI range for MAP_PIRQ_TYPE_MSI
- track IRQ access permission in host IRQ terms, not guest IRQ ones
(and with that, also disallow Dom0 access to IRQ0)
This is CVE-2013-1919 / XSA-46.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
remus: init sch_plug module based on kernel version
sch_plug module, for network buffering, is available as part of linux
kernel (from 3.4 onwards), as opposed to an out-of-tree module.
The netlink message format to talk to the in-kernel module is different from
that of the old version. So, before initializing the Plug Qdisc, check
the kernel version and use the appropriate message format.
Also change the names of the constants to reflect the format used by the mainline
module [CHECKPOINT -> BUFFER , RELEASE -> RELEASE_ONE ].
Signed-off-by: Shriram Rajagopalan <rshriram@cs.ubc.ca>
tools/xend: Only add cpuid and cpuid_check to sexpr once
When converting a XendConfig object to sexpr, cpuid and cpuid_check
were being emitted twice in the resulting sexpr. The first conversion
writes incorrect sexpr, causing parsing of the sexpr to fail when xend
is restarted and domain sexpr files in /var/lib/xend/domains/<dom-uuid>
are read and parsed.
This patch skips the first conversion, and uses only the custom
cpuid{_check} conversion methods called later. It is not pretty, but
is the least invasive fix in this complex code.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
gcc 4.8 identifies several places where code of the form memset(x, 0,
sizeof(x)); is used incorrectly, meaning that less memory is set to
zero than required.
Signed-off-by: Michael Young <m.a.young@durham.ac.uk>
Committed-by: Keir Fraser <keir@xen.org>
In changeset 19990:38dd208e1d95 a new parameter 'env' was added to
xPopen3, but no code was added to actually pass the environment down to
execvpe. Also, the new code was unreachable.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Ian Campbell <ian.campbell@citrix.com>
This was removed by 26167:31dcc0e08754 "xend: Remove old vtpm support
from xm" but at least one caller was left. Reinstate with
s/TPM/device/ since it appears that this functionality could apply
elsewhere.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Committed-by: Ian Campbell <ian.campbell@citrix.com>
In commit e8d40584, it intended to check xml file size and when empty will
return, the condition should be "if os.path.getsize(xml_path) == 0" rather
then "if not os.path.getsize(xml_path) == 0".
Signed-off-by: Chuang Cao <chuang.cao@oracle.com>
Signed-off-by: Joe Jin <joe.jin@oracle.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Committed-by: Ian Campbell <ian.campbell@citrix.com>
The sysfs parser for /sys/bus/scsi/devices understands only the layout
of kernel version 2.6.16. This looks as follows:
/sys/bus/scsi/devices/1:0:0:0/block:sda is a symlink to /sys/block/sda/
/sys/bus/scsi/devices/1:0:0:0/scsi_generic:sg1 is a symlink to /sys/class/scsi_generic/sg1
Both directories contain a 'dev' file with the major:minor information.
This patch updates the used regex strings to match also the colon to
make it more robust against possible future changes.
In kernel version 3.0 the layout changed:
/sys/bus/scsi/devices/ contains now additional symlinks to directories
such as host1 and target1:0:0. This patch ignores these as they do not
point to the desired scsi devices. They just clutter the devices array.
The directory layout in '1:0:0:0' changed as well, the 'type:name'
notation was replaced with 'type/name' directories:
/sys/bus/scsi/devices/1:0:0:0/block/sda/
/sys/bus/scsi/devices/1:0:0:0/scsi_generic/sg1/
Both directories contain a 'dev' file with the major:minor information.
This patch adds additional code to walk the subdir to find the 'dev'
file to make sure the given subdirectory is really the kernel name.
In addition this patch makes sure devname is not None.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Ian Campbell <ian.campbell@citrix.com>
Currently the callers of vscsi_get_scsidevices() do not pass a mask
string. This will call "lsscsi -g '[]'", which causes a lsscsi syntax
error. As a result the sysfs parser _vscsi_get_scsidevices() is used.
But this parser is broken and the specified names in the config file are
not found.
Using a mask '*' if no mask was given will call lsscsi correctly and the
following config is parsed correctly:
vscsi=[
'/dev/sg3, 0:0:0:0',
'/dev/disk/by-id/wwn-0x600508b4000cf1c30000800000410000, 0:0:0:1'
]
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Ian Campbell <ian.campbell@citrix.com>
Currently pvscsi can not pass SCSI devices that have just a scsi_generic node.
In the following example sg3 is a control LUN for the disk sdd.
But vscsi=['4:0:2:0,0:0:0:0'] does not work because the internal 'devname'
variable remains None. Later writing p-devname to xenstore fails because None
is not a valid string variable.
Since devname is used for just informational purpose use sg also as devname.
carron:~ $ lsscsi -g
[0:0:0:0] disk ATA FK0032CAAZP HPF2 /dev/sda /dev/sg0
[4:0:0:0] disk HP P2000G3 FC/iSCSI T100 /dev/sdb /dev/sg1
[4:0:1:0] disk HP P2000G3 FC/iSCSI T100 /dev/sdc /dev/sg2
[4:0:2:0] storage HP HSV400 0950 - /dev/sg3
[4:0:2:1] disk HP HSV400 0950 /dev/sdd /dev/sg4
[4:0:3:0] storage HP HSV400 0950 - /dev/sg5
[4:0:3:1] disk HP HSV400 0950 /dev/sde /dev/sg6
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Ian Campbell <ian.campbell@citrix.com>
Previously device ids in libxl were treated as integers meaning they
were being initialized to 0, which is a valid device id. This patch
makes devid its own type in libxl and initializes it to -1, an invalid
value.
This fixes a bug where if you try to do a xl DEV-attach multiple
time it will continuously try to reattach device 0 instead of
generating a new device id.
Signed-off-by: Matthew Fioravante <matthew.fioravante@jhuapl.edu>
Reviewed-by: George Dunlap <george.dunlap@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Ian Campbell <ian.campbell@citrix.com>
Cleaning the python directory should completely remove the build/
directory, otherwise subsequent builds may be short-circuited and a
stale build installed.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Ian Campbell <ian.campbell@citrix.com>
Wei Liu