The behaviour of vpmu=<bool> being exclusive of vpmu=bts|ipc|arch is odd and
contrary to Xen's normal command line parsing behaviour. Rewrite the parsing
to use the normal form, but retain the previous behaviour where the use of
bts/ipc/arch implies vpmu=true.
Parts of the documenation are stale, most notibly the HVM-only statement.
Update it for consistency and correctness.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Release-acked-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Document provides a brief introduction to the Argo interdomain
communication mechanism and a detailed description of the granular
locking used within the Argo implementation.
Signed-off-by: Christopher Clark <christopher.clark6@baesystems.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Release-acked-by: Juergen Gross <jgross@suse.com>
The register op is used by a domain to register a region of memory for
receiving messages from either a specified other domain, or, if specifying a
wildcard, any domain.
This operation creates a mapping within Xen's private address space that
will remain resident for the lifetime of the ring. In subsequent commits,
the hypervisor will use this mapping to copy data from a sending domain into
this registered ring, making it accessible to the domain that registered the
ring to receive data.
Wildcard any-sender rings are default disabled and registration will be
refused with EPERM unless they have been specifically enabled with the
new mac-permissive flag that is added to the argo boot option here. The
reason why the default for wildcard rings is 'deny' is that there is
currently no means to protect the ring from DoS by a noisy domain
spamming the ring, affecting other domains ability to send to it. This
will be addressed with XSM policy controls in subsequent work.
Since denying access to any-sender rings is a significant functional
constraint, the new option "mac-permissive" for the argo bootparam
enables overriding this. eg: "argo=1,mac-permissive=1"
The p2m type of the memory supplied by the guest for the ring must be
p2m_ram_rw and the memory will be pinned as PGT_writable_page while the ring
is registered.
This hypercall op and its interface currently only supports 4K-sized pages.
Signed-off-by: Christopher Clark <christopher.clark6@baesystems.com>
Tested-by: Chris Patterson <pattersonc@ainfosec.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Release-acked-by: Juergen Gross <jgross@suse.com>
Initialises basic data structures and performs teardown of argo state
for domain shutdown.
Inclusion of the Argo implementation is dependent on CONFIG_ARGO.
Introduces a new Xen command line parameter 'argo': bool to enable/disable
the argo hypercall. Defaults to disabled.
New headers:
public/argo.h: with definions of addresses and ring structure, including
indexes for atomic update for communication between domain and hypervisor.
xen/argo.h: to expose the hooks for integration into domain lifecycle:
argo_init: per-domain init of argo data structures for domain_create.
argo_destroy: teardown for domain_destroy and the error exit
path of domain_create.
argo_soft_reset: reset of domain state for domain_soft_reset.
Adds a new field to struct domain: struct argo_domain *argo;
In accordance with recent work on _domain_destroy, argo_destroy is
idempotent. It will tear down: all rings registered by this domain, all
rings where this domain is the single sender (ie. specified partner,
non-wildcard rings), and all pending notifications where this domain is
awaiting signal about available space in the rings of other domains.
A count will be maintained of the number of rings that a domain has
registered in order to limit it below the fixed maximum limit defined here.
Macros are defined to verify the internal locking state within the argo
implementation. The macros are ASSERTed on entry to functions to validate
and document the required lock state prior to calling.
The hash function for the hashtables that hold ring state is derived from
the string hashing function djb2 (http://www.cse.yorku.ca/~oz/hash.html)
by Daniel J. Bernstein. Basic testing with a limited number of domains and
ports has shown reasonable distribution for the table size.
The software license on the public header is the BSD license, standard
procedure for the public Xen headers. The public header was originally
posted under a GPL license at: [1]:
https://lists.xenproject.org/archives/html/xen-devel/2013-05/msg02710.html
The following ACK by Lars Kurth is to confirm that only people being
employees of Citrix contributed to the header files in the series posted at
[1] and that thus the copyright of the files in question is fully owned by
Citrix. The ACK also confirms that Citrix is happy for the header files to
be published under a BSD license in this series (which is based on [1]).
Signed-off-by: Christopher Clark <christopher.clark6@baesystems.com>
Acked-by: Lars Kurth <lars.kurth@citrix.com>
Reviewed-by: Ross Philipson <ross.philipson@oracle.com>
Tested-by: Chris Patterson <pattersonc@ainfosec.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Release-acked-by: Juergen Gross <jgross@suse.com>
xen-bugtool relies on code that has been removed in commit 9e8672f1c3
"tools: remove xend and associated python modules", more than 5 years
ago. Remove it, since it confuses users.
-$ /usr/sbin/xen-bugtool
Traceback (most recent call last):
File "/usr/sbin/xen-bugtool", line 9, in <module>
from xen.util import bugtool
ImportError: No module named xen.util
Signed-off-by: Hans van Kranenburg <hans.van.kranenburg@mendix.com>
Link: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=866380
Acked-by: Wei Liu <wei.liu2@citrix.com>
Release-acked-by: Juergen Gross <jgross@suse.com>
Early version of Cortex-A76 can end-up with corrupt TLBs if they
speculate an AT instruction while the S1/S2 system registers are in an
inconsistent state.
This can happen during guest context switch and when invalidating the
TLBs for other than the current VMID.
The workaround implemented in Xen will:
- Use an empty stage-2 with a reserved VMID while context switching
between 2 guests
- Use an empty stage-2 with the VMID where TLBs need to be flushed
Signed-off-by: Julien Grall <julien.grall@arm.com>
Reviewed-by: Andrii Anisov <andrii_anisov@epam.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Remove "chatty" and redundant information from the xl man page;
restrict it to functional descriptions only, and point instead to
qemu-depriv.pandoc and SUPPORT.md as locations for "canonical"
information.
Add a man page entry for device_model_user.
Update qemu-deprivilege.pandoc:
Changes in missing feature list:
- Migration is functional
- But qdisk backends are not
Add a missing restriction list.
The following statements from the man page are dropped:
- Mentioning PV; PV guests never have a device model.
- Drop the confusing statement about stdvga and cirrus vga options.
- Re-used domain IDs are now handled.
- Device models should no longer be able to create world-readable
files on dom0's filesystem.
Signed-off-by: George Dunlap <george.dunlap@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Release-acked-by: Juergen Gross <jgross@suse.com>
For development purposes, it is very convenient to boot Xen as a PVH guest,
with an XTF PV or PVH "dom0". The edit-compile-go cycle is a matter of
seconds, and you can reasonably insert printk() debugging in places which
which would be completely infeasible when booting fully-fledged guests.
However, the PVH dom0 path insists on having a working IOMMU, which doesn't
exist when virtualised as a PVH guest, and isn't necessary for XTF anyway.
Introduce a developer mode to skip the IOMMU requirement.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Release-acked-by: Juergen Gross <jgross@suse.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
This option is unique to x86 PV dom0's, but it is not sensible to have a
catch-all which blindly maps all non-RAM regions into the IOMMU.
The map-reserved option remains, and covers all the buggy firmware issues that
I am aware of. The two common cases are legacy USB keyboard emulation, and
the BMC mailbox used by vendor firmware in NICs/HBAs to report information
back to the iLO/iDRAC/etc for remote remote management purposes.
A specific advantage of this change is that x86 dom0's IOMMU setup is now
consistent between PV and PVH.
This change is not expected to have any impact, due to map-reserved remaining.
In the unlikely case that it does cause an issue, we should introduce other
map-$SPECIFIC options rather than re-introducing this catch-all.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Release-acked-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Update parse_efi_param() to use parse_boolean() for "rs", so it behaves
like other Xen booleans.
However, change "attr=uc" to not be a boolean. "no-attr=uc" is ambiguous and
shouldn't be accepted, but accept "attr=no" as an acceptable alternative.
Update the command line documentation for consistency.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Release-acked-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Second try, this time also works for all links to xen-vbd-interface(7).
We don't try anymore to have pod2html generate relative links, instead
we do it ourself.
First, we modify all links to man pages to have what looks like an
absolute URL and pod2html will just write it in the html output.
Absolute URL in POD are in the form L<text|scheme:...> so let's just use
a scheme that isn't real, but easy to find in the resulting html output:
"relative:".
Then we fix the output and remove all the bogus scheme "relative" and
can end up with nice relative links.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Release-acked-by: Juergen Gross <jgross@suse.com>
Having a pvh boolean isn't ideal. If we gain a 3rd virtulsation mode,
what does `dom0=no-pvh` mean?
Change the syntax to be "dom0 = pv | pvh" which offers an option to more
obviously select PV mode. Hide both options behind the relevent
CONFIG_* settings, and default to PVH mode when CONFIG_PV is compiled
out.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Release-acked-by: Juergen Gross <jgross@suse.com>
Alter parse_pci_param() to use parse_boolean(), so the sub options
behave like other Xen booleans.
Update the command line documentation for consistency.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Release-acked-by: Juergen Gross <jgross@suse.com>
Update parse_iommu_param() to uniformly use parse_boolean(), so the sub
booleans behave like other Xen boolean options. Reposition the
custom_param() to avoid a forward declaration of parse_iommu_param().
Rewrite the command line documentation almost from scratch, including
far more detail.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Release-acked-by: Juergen Gross <jgross@suse.com>
Update to the latest metadata style, and discuss the options more
completely where appropriate.
Drop the redundant comment beside parse_dom0_param() - it is already out
of sync with the main documentation. Also drop the individual
documentation for deprecated options which refer to their newer
versions, for the same reason.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Release-acked-by: Juergen Gross <jgross@suse.com>
Currently, all links to other man pages are sent to
http://man.he.net/man$mansection/$manpage, but that site doesn't have
Xen man pages, so all links to other Xen man pages are broken.
In order to fix that, this is going to be a bit complex.
First, we need to teach pod2html on where other .pod files can be found,
otherwise it isn't going make any links to our pages. This is done with
--podpath.
Second, pod2html doesn't actually understand our format
"$manpage.$mansection.pod". But instead of teaching it (which is
probably impossible) we are going to modify our .pod files in order to
tell pod2html which file to look for. This is done with the sed command
by transforming for example: "L<xl.conf(5)>" to "L<xl.conf(5)|xl.conf.5>".
Last but not least, in order to have relative links to the other
generated man page, we are going against the rules, we are going to use
"--htmlroot=." so that pod2html doesn't prepand "/" to all "relative"
links. We are also going to `cd` into the "man" dir and set podpath to
"." so that pod2html is going to generate relative links to other pod
file in the form "./$man" insteadof "man/$man" or "../$man" with other
compination of options. The result of --podpath + --podroot can be check
in pod2html's cache file "pod2html.tmp".
All of this is going to generate links in the form "./$html_manpage".
But all of this doesn't work for xen-vbd-interface(7), because it's not
a pod file... maybe we could generate pod2html's cache (pod2html.tmp)
file to add en entry.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Release-acked-by: Juergen Gross <jgross@suse.com>
As a short term alternative to deleting the code, default its building
to off (overridable in EXPERT mode only). Additionally make sure other
related baggage (LZO code) won't be carried when the option is off (with
TMEM scheduled to be deleted anyway, I didn't want to introduce a
separate Kconfig option to control the LZO compression code, and hence
CONFIG_TMEM is used directly there). Similarly I couldn't be bothered to
add actual content to the command line option doc for the two affected
options.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Release-acked-by: Juergen Gross <jgross@suse.com>
Add a verbose option to the dom0 command line, so that dom0 builder
can print extra debug information when required.
Use this new verbose mode to print statistics about memory allocations
when populating dom0 p2m.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
The misc/xen-command-line.markdown reference in configure.ac should have been
updated in the same changeset.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Now that all use of markdown as been replaced with pandoc, drop it from
configure.ac and from the docs/ Makefile.
Instead of just deleting the markdown reference from README, adjust the line
to mention the other optional packages required for documentation.
Drop markdown from travis, but leave it in the docker containers as they get
used for stable branches as well.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
The original intent of this patch was to rename xen-vbd-interface.markdown.7
to xen-vbd-interface.pandoc.7 to remove the final markdown file from the docs/
tree.
The DOC_MANx lists are broken. They contain MANxSRC-y twice, the first half
with a partial %.pod substituation, and the second half with a partial
%.markdown substitution. This is also the root cause behind the filtering
activity in the uninstall-man$(i)-pages rule.
Furthermore, the logic for generating the manpage targets is unnecesserily
repetative, owing to the layout of source files in the man/ directory.
Therefore, tackle the problem by renaming all of our manpage source files from
"$FORMAT.$SECTION" to "$SECTION.$FORMAT". For the two xl.cfg.5 and xl.1 which
are preprocessed by autoconf to contain path information, this requires
updating configure.ac and .gitignore. The markdown to pandoc conversion is
performed as well, as it is also a straight rename.
An ancillary benefit of this renaming is that text editors stand a chance of
being able to work out the correct mode to use.
As for the makefile:
1) Break the MAN_SECTIONS list out of the GENERATE_MANPAGE_RULES loop, as we
are going to use it a second time.
2) Do away with the individaul MANxSRC-y variables. Use a single list,
derived from all *.pod and *.pandoc files, with their format suffixes
removed.
3) Use a $(foreach ...) to generate the DOC_MANx lists, filling them with the
correct content.
4) The DOC_HTML and DOC_TXT can now include all manpages with a single
substitution, as they don't need to separate the manpages by
section-numbered-directory.
5) Fix up the filenames in the manpage metarule to match the renaming.
No functional change.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
c/s a3a99df44 "docs/cmdline: Rewrite the cpuid_mask_* section" completely
forgot about how markdown gets rendered to HTML (as opposed to PDF), because
we use different translators depending on the destination format.
markdown and pandoc are very similar markup languages, but a couple of details
about pandoc cause it to have far more user-friendly inline markup.
Switch all markdown documents to be pandoc (so we are using a single
translator, and therefore a single flavour of markdown), which fixes the
rendered docs on xenbits.xen.org/docs.
While changing the format, fix the remainder of the escaped underscores in the
same mannor as the previous patch. The two problem cases here are __LINE__
and __FILE__ where the first underscore still needs escaping.
In addition, dmop.markdown and dom0less.markdown didn't used to get processed,
as only .markdown files in the misc/ directory got considered.
dom0less.pandoc gets picked up automatically now, due to being in the
features/ directory, but designs/ needs adding to the pandoc directory list
for dmop.pandoc to get processed.
While edting in appropriate areas, take the opportunity to fix some markup to
the surrounding style, and drop trailing whitespace.
No change in content - only formatting. This results in the text being easier
to read and grep.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Pandoc deliberately (and contrary to markdown) doesn't treat underscores in
the middle of normal text as emphasis markers, as this is almost always the
unhelpful interpretation.
For text which is emphasised using _, an underscore in the middle is
interpreted, but the emphasis marker can be switched to * instead.
One problem case is where we use {} globbing with identifier names, as it
counts as a word break. Therefore, we do need to retain the escaped
underscore immediately following a closing brace.
No change in content - only formatting. This results in the text being easier
to read and grep.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Switch parse_ept_param() to use the parse_boolean() infrastructure for more
consistency with related command line parameters. Rename opt_pml_enabled to
opt_ept_pml for consistency with opt_ept_ad, and switch it to being bool
Drop the leading comment for parse_ept_param(). It is stale, and just repeats
the command line documentation.
For the command line documentation, rewrite it largely from scratch, updating
to the latest metadata style. Document A/D first, including a note about
AVR41, and modify PML to note its dependency on A/D.
No practical changes to behaviour.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Kevin Tian <kevin.tian@intel.com>
Untrusted device models must be killed by uid rather than by pid for
safety. To do this reliably, we need another uid, not used for any
other purpose, from which to make the kill system call.
When using xen-qemuuser-range-base, we can repurpose
xen-qemuuser-range-base itself as a UID from which to kill other
devicemodel uids (since domain ID 0 should never have a device model
associated with it).
However, we'd like people to be able to use the device_model_user
feature without also defining xen-qemuuser-range-base (which requires
the ability to 'reserve' 32k+ user IDs).
To that end, introduce the xen-qemuuser-reaper id. When killing by
UID, first look for and use that ID if available; then fall back to
xen-qemuuser-range-base.
Document the new call in docs/features/qemu-deprivilege.pandoc.
Signed-off-by: George Dunlap <george.dunlap@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
A number of subsequent patches rely on as-yet undefined behavior for
what the `device_model_user` parameter does. Rather than implement it
incorrectly (or randomly), or remove the feature, describe an expected
usage for the feature. Further patches will make decisions based on
this expected usage.
Signed-off-by: George Dunlap <george.dunlap@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
PVRDTSCP is believed-unused, and its implementation has adverse consequences
on unrelated functionality in the hypervisor. As a result, support is being
removed.
For more historical context, see
c/s c17b36d5dc
c/s 04656384a1
Modify libxl to provide a slightly more helpful error message if it encounters
PVRDTSCP being selected. While adjusting TSC handling, make libxl check for
errors from the set_tsc hypercall.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Today the memory size of dom0 can be specified only in terms of bytes
(either an absolute value or "host-mem - value"). When dom0 shouldn't
be auto-ballooned this requires nearly always a manual adaption of the
Xen boot parameters to reflect the actual host memory size.
Add more possibilities to specify memory sizes. Today we have:
dom0_mem= List of ( min:<size> | max:<size> | <size> )
with <size> being a positive or negative size value (e.g. 1G).
Modify that to:
dom0_mem= List of ( min:<sz> | max:<sz> | <sz> )
<sz>: <size> | [<size>+]<frac>%
<frac>: integer value < 100
With the following semantics:
<frac>% specifies a fraction of host memory size in percent.
<sz> is a percentage of host memory plus an offset.
So <sz> being 1G+25% on a 256G host would result in 65G.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
A large amount of the information here is obsolete since Xen 4.7
To being with, however, this patch marks a change in style for section
headings, due to how HTML anchors are generated. Having more than one
parameter per heading makes an awkward anchor, especially when brace globbing
is used. Furthermore, the misc suffixes such as (AMD only) get included, as
do the escaping for the underscores.
Markdown doesn't require escaped underscores in headings (I'm not entirely
sure how we ended up with that style), so remove them and fully expand the
glob syntax. Also adjust com1,com2 while at it, which is the only other
multi-parameter heading. Move the misc suffixes into an "Applicability:" note
alongside the information about defaults.
This results in the headings being unadorned, and identical to how they are
expressed on the command line and in code.
For cpuid_mask_cpu option, collapse the long line of almost identical strings
using [] globbing. The result is much shorter and clearer to read. Add a
warning that this option no longer masks all features on Fam15h and above, due
to not making use of the leaf 7 masks.
For the remainder of the cpuid_mask_* options, collapse them all together into
a single description.
Finally, leave an explicit note explaining that people should not be using
these options for migration safety.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Adjust the default line to note that the default is now selectable in Kconfig.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
* vwfi needs a closing `. rmrr needs one as well, and the opening ' switched
to `
* The com1/com2 example lines are already verbatim blocks and shouldn't
escape their underscores. This ends up in the rendered output.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Now, as well as a `code block', with
| Something: some status
we tolerate a definition list which in pandoc terms looks like this
|Term
|: Definition
This ought not usually be be used for features but it will be useful
for linking to the release notes, because markup is not allowed in
code blocks but is in definitions.
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Juergen Gross <jgross@suse.com>
In fact this was not markdown content, but just a string. We are
however going to make it be markdown content. So adjust the comments,
and the consumer.
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Juergen Gross <jgross@suse.com>
If our run of pandoc to convert pieces of markup in our hand, into
html, fails, print the json that was rejected.
No change in non-error cases.
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Juergen Gross <jgross@suse.com>
Which, on x86, requires fiddling with the INTx bit in PCI config space,
since for internally used MSI we can't delegate this to Dom0.
ns16550_init_postirq() also needs (benign) re-ordering of its
operations.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
bti= was introduced with the original Spectre fixes (Jan 2018), but by the
time Speculative Store Bypass came along (May 2018), it was superceeded by the
more generic spec-ctrl=.
Since then, we've had LazyFPU (June 2018) and L1TF (August 2018), which means
noone will be using the option. Remove it entirely - anyone who happens to
accidentially be using it might now spot Xen complaining about an option it
doesn't understand.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Add a new document to provide information on how to use dom0less related
features and their current limitations.
Signed-off-by: Stefano Stabellini <stefanos@xilinx.com>
Acked-by: Julien Grall <julien.grall@arm.com>
Extend the existing device tree based multiboot protocol to include
information regarding multiple domains to boot.
Signed-off-by: Stefano Stabellini <stefanos@xilinx.com>
Reviewed-by: Julien Grall <julien.grall@arm.com>
Scrubbing RAM during boot may take a long time on machines with lots
of RAM. Add 'idle' option to bootscrub which marks all pages dirty
initially so they will eventually be scrubbed in idle-loop on every
online CPU.
It's guaranteed that the allocator will return scrubbed pages by doing
eager scrubbing during allocation (unless MEMF_no_scrub was provided).
Use the new 'idle' option as the default one.
Signed-off-by: Sergey Dyasli <sergey.dyasli@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Andrew Cooper