Instead of defining get_unaligned() and put_unaligned() in a way that
is only supporting architectures allowing unaligned accesses, use the
same approach as the Linux kernel and let the compiler do the
decision how to generate the code for probably unaligned data accesses.
Update include/xen/unaligned.h from include/asm-generic/unaligned.h of
the Linux kernel.
The generated code has been checked to be the same on x86.
Modify the Linux variant to not use underscore prefixed identifiers,
avoid unneeded parentheses and drop the 24-bit accessors.
Add the definition of __packed to xg_dom_decompress_unsafe_zstd.c in
libxenguest as it is using a cruel hack to reuse the hypervisor's
decompressing code for stubdom.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Origin: git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git 803f4e1eab7a
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
The procedure used to customize the domain CPU policy is broken when
toolstack tries to set leaves (with subleaves) that the hypervisor didn't
need to serialise (i.e: because they where empty subleaves).
During typical domain creation xg does the following:
1. Probe Xen for max #leaves that a policy may have
2. Allocate memory for that many leaves
3. Tell the hypervisor to dump the policy in the allocated buffer
4. Deserialise it
5. Modify it
6. Reserialise it
7. Send it back to Xen
The problem is that (3) overrides nr_leaves, which then makes (6) fail in
the case where (5) has added subleaves that Xen understands but didn't need
to serialize on (3).
The fix uses an opaque CPU policy object so we can (a) avoid probing Xen
for sizes, and (b) trivially have knowledge of the actual size of the
buffer.
While at it, fix xc_cpu_policy_destroy() to preserve errno accross free()
Signed-off-by: Alejandro Vallejo <alejandro.vallejo@cloud.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
When adding locking to tools/libs/evtchn/minios.c a semaphore was
used. This can result in deadlocks, as the lock is taken inside the
event handler, which can interrupt an already locked region.
The fix is rather simple, as Mini-OS is supporting a single vcpu
only. So instead of the semaphore it is enough to disable interrupts
when operating on the port list.
Fixes: bc4fe94a69 ("ools/libs/evtchn: replace assert()s in stubdom with proper locking")
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
In tools/libs/evtchn/minios.c there are assert()s for the current
thread being the main thread when binding an event channel.
As Mini-OS is supporting multiple threads, there is no real reason
why the binding shouldn't be allowed to happen in any other thread.
Drop the assert()s and replace them with proper locking of the
port_list.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jason Andryuk <jandryuk@gmail.com>
Right now, all tools and hypervisor will be complied with the option
-Wdeclaration-after-statement. While most of the code in the hypervisor
is controlled by us, for tools we may import external libraries.
The build will fail if one of them are using the construct we are
trying to prevent. This is the case when building against Python 3.12
and Yocto:
| In file included from /srv/storage/alex/yocto/build-virt/tmp/work/core2-64-poky-linux/xen-tools/4.17+stable/recipe-sysroot/usr/include/python3.12/Python.h:44,
| from xen/lowlevel/xc/xc.c:8:
| /srv/storage/alex/yocto/build-virt/tmp/work/core2-64-poky-linux/xen-tools/4.17+stable/recipe-sysroot/usr/include/python3.12/object.h: In function 'Py_SIZE':
| /srv/storage/alex/yocto/build-virt/tmp/work/core2-64-poky-linux/xen-tools/4.17+stable/recipe-sysroot/usr/include/python3.12/object.h:233:5: error: ISO C90 forbids mixed declarations and code [-Werror=declaration-after-statement]
| 233 | PyVarObject *var_ob = _PyVarObject_CAST(ob);
| | ^~~~~~~~~~~
| In file included from /srv/storage/alex/yocto/build-virt/tmp/work/core2-64-poky-linux/xen-tools/4.17+stable/recipe-sysroot/usr/include/python3.12/Python.h:53:
| /srv/storage/alex/yocto/build-virt/tmp/work/core2-64-poky-linux/xen-tools/4.17+stable/recipe-sysroot/usr/include/python3.12/cpython/longintrepr.h: In function '_PyLong_CompactValue':
| /srv/storage/alex/yocto/build-virt/tmp/work/core2-64-poky-linux/xen-tools/4.17+stable/recipe-sysroot/usr/include/python3.12/cpython/longintrepr.h:121:5: error: ISO C90 forbids mixed declarations and code [-Werror=declaration-after-statement]
| 121 | Py_ssize_t sign = 1 - (op->long_value.lv_tag & _PyLong_SIGN_MASK);
| | ^~~~~~~~~~
| cc1: all warnings being treated as errors
Looking at the tools directory, a fair few directory already add
-Wno-declaration-after-statement to inhibit the default behavior.
We have always build the hypervisor with the flag, so for now remove
only the flag for anything but the hypervisor. We can decide at later
time whether we want to relax.
Also remove the -Wno-declaration-after-statement in some subdirectory
as the flag is now unnecessary.
Part of the commit message was take from Alexander's first proposal:
Link: https://lore.kernel.org/xen-devel/20231128174729.3880113-1-alex@linutronix.de/
Reported-by: Alexander Kanavin <alex@linutronix.de>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Tested-by: Jason Andryuk <jandryuk@gmail.com>
Signed-off-by: Julien Grall <jgrall@amazon.com>
They allocate two different hypercall buffers, but leak the first
allocation if the second one failed due to an early return that bypasses
cleanup.
Remove the early exit and go through _post() instead. Invoking _post() is
benign even if _pre() failed.
Fixes: 6b85e42709 ('x86/sysctl: Implement XEN_SYSCTL_get_cpu_policy')
Fixes: 60529dfeca ('x86/domctl: Implement XEN_DOMCTL_get_cpu_policy')
Fixes: 14ba07e6f8 ('x86/domctl: Implement XEN_DOMCTL_set_cpumsr_policy')
Signed-off-by: Alejandro Vallejo <alejandro.vallejo@cloud.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
These macros were hiding that the ops are not zero-initialized by the
toolstack. This is needlessly opaque for something so simple, so this patch
removes them and replaces them with explicit zero-initialising versions.
The patch also removes PHYSDEV_OP from there, as that seems to be an old
dead macro.
Signed-off-by: Alejandro Vallejo <alejandro.vallejo@cloud.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Introduce a timeout for bootloader execution when running in restricted mode.
Allow overwriting the default time out with an environment provided value.
This is part of XSA-443 / CVE-2023-34325
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Much like the device model depriv mode, add the same kind of support for the
bootloader. Such feature allows passing a UID as a parameter for the
bootloader to run as, together with the bootloader itself taking the necessary
actions to isolate.
Note that the user to run the bootloader as must have the right permissions to
access the guest disk image (in read mode only), and that the bootloader will
be run in non-interactive mode when restricted.
If enabled bootloader restrict mode will attempt to re-use the user(s) from the
QEMU depriv implementation if no user is provided on the configuration file or
the environment. See docs/features/qemu-deprivilege.pandoc for more
information about how to setup those users.
Bootloader restrict mode is not enabled by default as it requires certain
setup to be done first (setup of the user(s) to use in restrict mode).
This is part of XSA-443 / CVE-2023-34325
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Currently, libxl will grant IOMEM, I/O port and IRQ permissions when
a PCI is attached (see pci_add_dm_done()) for all domain types. However,
the permissions are only revoked for non-HVM domain (see do_pci_remove()).
This means that HVM domains will be left with extra permissions. While
this look bad on the paper, the IRQ permissions should be revoked
when the Device Model call xc_physdev_unmap_pirq() and such domain
cannot directly mapped I/O port and IOMEM regions. Instead, this has to
be done by a Device Model.
The Device Model can only run in dom0 or PV stubdomain (upstream libxl
doesn't have support for HVM/PVH stubdomain).
For PV/PVH stubdomain, the permission are properly revoked, so there is
no security concern.
This leaves dom0. There are two cases:
1) Privileged: Anyone gaining access to the Device Model would already
have large control on the host.
2) Deprivileged: PCI passthrough require PHYSDEV operations which
are not accessible when the Device Model is restricted.
So overall, it is believed that the extra permissions cannot be exploited.
Rework the code so the permissions are all removed for HVM domains.
This needs to happen after the QEMU has detached the device. So
the revocation is now moved to pci_remove_detached().
Also add a comment on top of the error message when the PIRQ cannot
be unbind to explain this could be a spurious error as QEMU may have
already done it.
Signed-off-by: Julien Grall <jgrall@amazon.com>
Release-acked-by: Henry Wang <Henry.Wang@arm.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Python distutils is deprecated and is going to be removed in Python
3.12. distutils.sysconfig is available as the sysconfig module in
stdlib since Python 2.7 and Python 3.2, so use that directly.
Update the README to reflect that we now depend on Python 2.7.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Signed-off-by: Javi Merino <javi.merino@cloud.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
[Regen ./configure]
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
xc_dt_overlay() sends the device tree binary overlay, size of .dtbo and overlay
operation type i.e. add or remove to xen.
Signed-off-by: Vikram Garhwal <vikram.garhwal@amd.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
The function do_pci_remove() has two local variables 'domid' and
'domainid' containing the same value.
Looking at the history, until 2cf3b50dcd ("libxl_pci: Use
libxl__ao_device with pci_remove") the two variables may have
different value when using a stubdomain.
As this is not the case now, remove 'domainid'. This will reduce
the confusion between the two variables.
Note that there are other places in libxl_pci.c which are using
the two confusing names within the same function. They are left
unchanged for now.
No functional changes intented.
Signed-off-by: Julien Grall <jgrall@amazon.com>
Reviewed-by: Jason Andryuk <jandryuk@gmail.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Two entries were left in place by d638fe233c ("libxl: use the cpuid
feature names from cpufeatureset.h"), despite matching the generated
names.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
The full structures cannot match in layout, as soon as a 32-bit tool
stack build comes into play. But it also doesn't need to; the part of
the layouts that needs to match is merely the union that we memcpy()
from the sysctl structure to the xc one. Keep (in adjusted form) only
the relevant ones.
Since the whole block needs touching anyway, move it closer to the
respective memcpy() and use a wrapper macro to limit verbosity. Also
tidy the full-size-check there.
Fixes: 2381dfab08 ("xen/sysctl: Nest cpufreq scaling options")
Reported-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jason Andryuk <jandryuk@gmail.com>
Add xc_set_cpufreq_cppc to allow calling xen_systctl_pm_op
SET_CPUFREQ_CPPC.
Signed-off-by: Jason Andryuk <jandryuk@gmail.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Rearrange code now that xen_sysctl_pm_op's get_para fields has the
nested union and struct. In particular, the scaling governor
information like scaling_available_governors is inside the union, so it
is not always available. Move those fields (op->u.get_para.u.s.u.*)
together as well as the common fields (ones outside the union like
op->u.get_para.turbo_enabled).
With that, gov_num may be 0, so bounce buffer handling needs
to be modified.
scaling_governor and other fields inside op->u.get_para.u.s.u.* won't be
used for hwp, so this will simplify the change when hwp support is
introduced and re-indents these lines all together.
Signed-off-by: Jason Andryuk <jandryuk@gmail.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Add a union and struct so that most of the scaling variables of struct
xen_get_cpufreq_para are within in a binary-compatible layout. This
allows cppc_para to live in the larger union and use uint32_ts - struct
xen_cppc_para will be 10 uint32_t's.
The new scaling struct is 3 * uint32_t + 16 bytes CPUFREQ_NAME_LEN + 4 *
uint32_t for xen_ondemand = 11 uint32_t. That means the old size is
retained, int32_t turbo_enabled doesn't move and it's binary compatible.
The out-of-context memcpy() in xc_get_cpufreq_para() now handles the
copying of the fields removed there.
Signed-off-by: Jason Andryuk <jandryuk@gmail.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Instead of adding the definition of XEN_RUN_STORED to CFLAGS in
multiple Makefiles, let configure add it to tools/config.h instead.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
The "cpuid_empty" label is also (in principle; maybe only for rubbish
input) reachable in the "cpuid_only" case. Hence the label needs to live
ahead of the check of the variable.
Fixes: 5b80cecb74 ("libxl: introduce MSR data in libxl_cpuid_policy")
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
While what "tmp" points to has been cleared at the end of the first
iteration of parseNetDevLine()'s main loop, this is too late for the
first iteration's invocation of strpbrk() (copying the interface name).
Properly nul-terminate the string at population time instead, removing
the late clearing.
While there also eliminate a confusing (because of being wrong) comment:
A regex parsing error would be handled one further scope outwards. Here
we're dealing with field 1 vs any of the later fields.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
In osstest, the jobs using pygrub on arm64 on the branch linux-linus
started to fails with:
[Errno 28] No space left on device
Error writing temporary copy of ramdisk
This is because /var/run is small when dom0 has only 512MB to work
with, /var/run is only 40MB. The size of both kernel and ramdisk on
this jobs is now about 42MB, so not enough space in /var/run.
So, to avoid writing a big binary in ramfs, we will use /var/lib
instead, like we already do when saving the device model state on
migration.
Reported-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Jason Andryuk <jandryuk@gmail.com>
We can't use initializers of unnamed struct/union members just yet.
Fixes: d638fe233c ("libxl: use the cpuid feature names from cpufeatureset.h")
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Because of -Wshadow the build otherwise fails with old enough glibc.
While there also obey line length limits for msr_add().
Fixes: 6d21cedbaa ("libxl: add support for parsing MSR features")
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Add -e argument to xl console and pass to new escape_character argument
of libxl_console_exec.
Introduce a new API version to support this new argument and advertise
the new functionality in libxl.h
In libxl_console_exec, there are currently two call sites to execl,
which uses varargs, in order to support optionally passing
'start-notify-fd' to the console client. In order to support passing
the 'escape' argument optionally too, refactor to instead have a single
call site to execv, which has the same behavior but takes an array of
arguments.
If -e is not specified, --escape is not passed to the console client and
the existing value (^]) is used as a default.
Update the xl docs.
Signed-off-by: Peter Hoyes <Peter.Hoyes@arm.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Without it being present it won't be possible to use some
libxl__device_type's callbacks for virtio devices as the common code
can only invoke these callbacks (by dereferencing a pointer) for valid
libxl__device_type's elements when iterating over device_type_tbl[].
Please note, there is no issue within current the code base as virtio
devices don't use callbacks that depend on libxl__virtio_devtype
presence in device_type_tbl[]. The issue will appear as soon as we start
using these callbacks (for example, dm_needed).
Signed-off-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Introduce support for handling MSR features in
libxl_cpuid_parse_config(). The MSR policies are added to the
libxl_cpuid_policy like the CPUID one, which gets passed to
xc_cpuid_apply_policy().
This allows existing users of libxl to provide MSR related features as
key=value pairs to libxl_cpuid_parse_config() without requiring the
usage of a different API.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
The current implementation in libxl_cpuid_parse_config() requires
keeping a list of cpuid feature bits that should be mostly in sync
with the contents of cpufeatureset.h.
Avoid such duplication by using the automatically generated list of
cpuid features in INIT_FEATURE_NAMES in order to map feature names to
featureset bits, and then translate from featureset bits into cpuid
leaf, subleaf, register tuple.
Note that the full contents of the previous cpuid translation table
can't be removed. That's because some feature names allowed by libxl
are not described in the featuresets, or because naming has diverged
and the previous nomenclature is preserved for compatibility reasons.
Should result in no functional change observed by callers, albeit some
new cpuid features will be available as a result of the change.
While there constify cpuid_flags name field.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Move the CPUID value parsers out of libxl_cpuid_parse_config() into a
newly created cpuid_add() local helper. This is in preparation for
also adding MSR feature parsing support.
No functional change intended.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Add a new array field to libxl_cpuid_policy in order to store the MSR
policies.
Adding the MSR data in the libxl_cpuid_policy_list type is done so
that existing users can seamlessly pass MSR features as part of the
CPUID data, without requiring the introduction of a separate
domain_build_info field, and a new set of handlers functions.
Note that support for parsing the old JSON format is kept, as that's
required in order to restore domains or received migrations from
previous tool versions. Differentiation between the old and the new
formats is done based on whether the contents of the 'cpuid' field is
an array or a map JSON object.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Currently libxl_cpuid_policy_list is an opaque type to the users of
libxl, and internally it's an array of xc_xend_cpuid objects.
Change the type to instead be a structure that contains one array for
CPUID policies, in preparation for it also holding another array for
MSR policies.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Like it's done with CPUID, introduce support for passing MSR values to
xc_cpuid_apply_policy(). The chosen format for expressing MSR policy
data matches the current one used for CPUID. Note that existing
callers of xc_cpuid_apply_policy() can pass NULL as the value for the
newly introduced 'msr' parameter in order to preserve the same
functionality, and in fact that's done in libxl on this patch.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Currently, the grant mapping related device tree properties are added if
the backend domain is not Dom0. While Dom0 is privileged and can do
foreign mapping for the entire guest memory, it is still desired for
Dom0 to access guest's memory via grant mappings and hence map only what
is required.
This commit adds the "grant_usage" parameter for virtio devices, which
provides better control over the functionality.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: George Dunlap <george.dunlap@cloud.com>
Currently libxl and the x86-emulator tests carry their own versions. Factor
those out into the common macros header so every library can make use of
it. This is required so the following patch can add this macro to a header
used both in Xen and tools/libs.
No functional change.
Signed-off-by: Alejandro Vallejo <alejandro.vallejo@cloud.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Instead of including the same small C source in multiple binaries from
2 source directories, use a header file with inline functions as a
replacement.
As some of the functions are exported by libxenstore, rename the inline
functions from xs_*() do xenstore_*() and add xs_*() wrappers to
libxenstore.
With that no sources required to build libxenstore are left in
tools/xenstore, so the file COPYING can be removed now.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Julien Grall <jgrall@amazon.com>
xs_daemon_tdb() in xs_lib.c is no longer used at all, so it can be
removed. xs_domain_dev() and xs_write_all() are not used by xenstored,
so they can be moved to tools/libs/store/xs.c.
xs_daemon_rootdir() is used by xenstored only and it only calls
xs_daemon_rundir(), so replace its use cases with xs_daemon_rundir()
and remove it from xs_lib.c.
xs_daemon_socket_ro() is needed in libxenstore only, so move it to
tools/libs/store/xs.c.
Move functions used by xenstore-client only to xenstore_client.c.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Julien Grall <jgrall@amazon.com>
In particular, the libxg wrapper for unxz.c uses char for bool_t which is a
major antipattern. Luckily the code doesn't suffer from truncated values.
No functional change.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
This in particular allows to drop a dead assignment to "ptes" from near
the end of the function.
Coverity ID: 1532314
Fixes: bd7a29c3d0 ("tools/libs/ctrl: fix xc_core_arch_map_p2m() to support linear p2m table")
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
"t" is written first thing at the "retry_transaction" label.
Coverity ID: 1532321
Fixes: 1057300109 ("libxl: fix error handling (xenstore transaction leak) in libxl__domain_make")
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
"rc" is written immediately below the outer if(). Fold the remaining two
if()s.
Coverity ID: 1532320
Fixes: 685e922d6f ("tools/libxc: Rework xc_cpuid_apply_policy() to use {get,set}_cpu_policy()")
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
The _setdefault() function for virtio devices is getting called after
libxl__prepare_dtb(), which is late as libxl__prepare_dtb() expects the
defaults to be already set by this time.
Call libxl__virtio_devtype.set_default() from
libxl__domain_config_setdefault(), in a similar way as other devices
like disk, etc.
Suggested-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Only the VirtIO backend will watch xenstore to find out when a new
instance needs to be created for a guest, and read the parameters from
there. VirtIO frontend are only virtio, so they will not do anything
with the xenstore nodes. They can be removed.
While at it, also add a comment to the libxl_virtio.c file.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
There is no real need for including tools/xenstore/utils.h from
libxenstore, as only streq() and ARRAY_SIZE() are obtained via that
header.
streq() is just !strcmp(), and ARRAY_SIZE() is brought in via
xen-tools/common-macros.h.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Julien Grall <jgrall@amazon.com>
Replace the usage of the xenstore private list.h header with the
common xen_list.h one.
Use the XEN_TAILQ type list, as it allows to directly swap the
related macros/functions without having to change the logic.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Julien Grall <jgrall@amazon.com>
MASK_EXTR() and MASK_INSR() are a matching pair. Keep them together.
Drop the pair from x86-emulate.h which includes common-macros.h.
Fixes: 56a7aaa16b ("tools: add physinfo arch_capabilities handling for Arm")
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Luca Fancellu <luca.fancellu@arm.com>
Acked-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Jason Andryuk <jandryuk@gmail.com>
On Arm, the SVE vector length is encoded in arch_capabilities field
of struct xen_sysctl_physinfo, make use of this field in the tools
when building for arm.
Create header arm-arch-capabilities.h to handle the arch_capabilities
field of physinfo for Arm.
Signed-off-by: Luca Fancellu <luca.fancellu@arm.com>
Acked-by: George Dunlap <george.dunlap@citrix.com>
Acked-by: Christian Lindig <christian.lindig@cloud.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Juergen Gross
Alejandro Vallejo
Julien Grall
Roger Pau Monne
Marek Marczykowski-Górecki
Vikram Garhwal
Jan Beulich
Jason Andryuk
Jens Wiklander
Anthony PERARD
Peter Hoyes
Oleksandr Tyshchenko
Viresh Kumar
Andrew Cooper
Luca Fancellu