Allow choosing which artifacts branch and job to use for Linux. This
allows running the same tests for different Linux versions, without
duplicating a lot of yaml sections.
Similarly, make the repo path itself configurable too. The main purpose
is to ensure the test pipeline triggered from any repo will fetch linux
artifact from the right repo. But with a minor change of using that
variable for rootfs and microcode artifacts too, it allows testing
test-artifacts repo changes without needing to modify gitlab-ci.yml in
xen.git at all.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Anthony PERARD <anthony.perard@vates.tech>
In an attempt to debug/workaround occasional console freeze, switch it
to polling mode. If that helps, it will narrow down the search.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Acked-by: Roger Pau Monné <roger.pau@citrix.com>
The selected jobs regex was assumed to be possibly empty in some places
and setting a default value for the regex caused the hardware jobs to
bypass some rules checks.
To fix this, adjust the rules to remove the check for empty and
instead just match the regex.
Fixes: 485ab1b5db
Signed-off-by: Victor Lira <victorm.lira@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
With the exception of the custom IBT job, copy all Debian 12 jobs making
Debian 13 versions, then trim the Debian 12 ranconfig jobs.
Update the test jobs using Debian 12 to use 13.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Denis Mukhin <dmukhin@ford.com>
Reviewed-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
Everything works fine with Debian 13. Provide two new build jobs (for a total
of 6), and update the test jobs.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Denis Mukhin <dmukhin@ford.com>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
Everything works fine with Debian 13. Provide two new build jobs, and update
both the randconfig the test jobs.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Oleksii Kurochko <oleksii.kurochko@gmail.com>
Introduce new CI job to run x86 XTF argo test under QEMU to smoke test argo
feature functionality in upstream CI.
The new job lead time is ~30s, limit max job duration to 60s.
Signed-off-by: Denis Mukhin <dmukhin@ford.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
This really is a legacy of not having parameters to start with. Give PV dom0
with a PVH domU a real name.
Reformat the table to fix alignment.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Hook arm64 QEMU configuration to qemu-xtf.sh and use new script in arm64 CI
jobs.
Signed-off-by: Denis Mukhin <dmukhin@ford.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Use qemu-xtf.sh for qemu-smoke-x86-64-gcc-efi job.
Lead time is reduced a bit since not all XTF code base is built, just the
required test.
Signed-off-by: Denis Mukhin <dmukhin@ford.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Add test runner script qemu-xtf.sh which is allows any XTF x86 test to be
easily executed. Test runner is invoked from the qemu-smoke* jobs with the
hardcoded parameters.
Each x86 XTF job lead time is reduced a bit since only the test-related code
is built, not the entire XTF project.
Add .gitignore to avoid committing test artifacts by mistake.
Signed-off-by: Denis Mukhin <dmukhin@ford.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
All the x86 hardware runners are out of date, to varying degrees, in terms of
microcode.
Microcode must be uncompressed and prepended to the initrd in order for Xen to
be able to use it during early boot.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Anthony PERARD <anthony.perard@vates.tech>
The argo artefact is now a cpio archive and can be appended to dom?-rootfs
directly, rather than being part of of the overlay. Drop the
copy_dom?_files() functions.
xen-argo.ko has moved into the standard location, so update the insmod path.
No practical change.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Anthony PERARD <anthony.perard@vates.tech>
Use the new test-artifacts which provide rootfs.cpio.gz rather than
initrd.tar.gz. rootfs.cpio.gz also has all the necessary top-level
directories, and includes the rc_verbose setting, so these modifications can
be dropped.
Having that, do not repack the whole initrd, but only pack modified
files and rely on Linux handling of concatenated archives.
This allows packing just test-related files (which includes the whole
toolstack), instead of the whole initrd.
For xilinx-smoke-dom0-x86_64.sh, this involves instructing grub not to unzip
the archive, as doing so corrupts it.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Anthony PERARD <anthony.perard@vates.tech>
Linux 6.6.56 was already added to test-artifacts for the argo testing, and
this removes one moving part while cleaning things up.
Drop the associated export job, and dockerfile.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
This is Intel i7-7567U in NUC 7i7BNH. This one is an older one, with no
firmware updates (last update from 2023) and no microcode udpates
either. While this firmware supports UEFI, network boot works only in
legacy mode - thus legacy is used here (via iPXE, instead of grub2.efi).
Testing legacy boot path may be a useful thing on its own.
Add the same set of tests as on ADL runner.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
This is AMD Zen2 (Ryzen 5 4500U specifically), in a HP Probook 445 G7.
This one has working S3, so add a test for it here.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Debugging sometimes involves running specific jobs on different
versions. It's useful to easily avoid running all of the not interesting
ones (for given case) to save both time and CI resources. Doing so used
to require changing the yaml files, usually in several places.
Ease this step by adding SELECTED_JOBS_ONLY variable that takes a regex.
Note that one needs to satisfy job dependencies on their own (for
example if a test job needs a build job, that specific build job
needs to be included too).
The variable can be specified via Gitlab web UI when scheduling a
pipeline, but it can be also set when doing git push directly:
git push -o ci.variable=SELECTED_JOBS_ONLY="/job1|job2/"
More details at https://docs.gitlab.co.jp/ee/user/project/push_options.html
The variable needs to include regex for selecting jobs, including
enclosing slashes.
A coma/space separated list of jobs to select would be friendlier UX,
but unfortunately that is not supported:
https://gitlab.com/gitlab-org/gitlab/-/issues/209904 (note the proposed
workaround doesn't work for job-level CI_JOB_NAME).
On the other hand, the regex is more flexible (one can select for
example all arm32 jobs).
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
There are a bunch of tests in tools/tests/, let them run in CI.
For each subdirectory expect "make run" will run the test, and observe
its exit code. This way, adding new tests is easy, and they will be
automatically picked up.
For better visibility, log test output to junit xml format, and let
gitlab ingest it. Set SUT_ADDR variable with name/address of the system
under test, so a network can be used to extract the file. The actual
address is set using DHCP. And for the test internal network, still add
the 192.168.0.1 IP (but don't replace the DHCP-provided one).
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Stefano Stabellini <stefano.stabellini@amd.com>
This allow to change the registry used for container in a single
place, and could be controlled via other mean.
Signed-off-by: Anthony PERARD <anthony.perard@vates.tech>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Rework the container to use heredocs for readability, and use
apt-get --no-install-recommends to keep the size down.
This reduces the size of the (uncompressed) container from 3.44GB to
1.97GB.
The container is left running the builds and tests as root. A
subsequent patch will make the necessary changes to the test scripts
to allow test execution as a non-root user.
Signed-off-by: Javi Merino <javi.merino@cloud.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Add x86_64 hardware test that creates a Xen Argo communication
connection between two PVH domains. In the test, dom0 creates a domU and
listens for messages sent by the domU through Argo.
To accomplish this, build Xen with CONFIG_ARGO=y and create a CI test job.
Update the xilinx x86_64 test script to support the new test, and add
"sync_console" to command line to avoid an issue with console messages
being lost.
Requested-by: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: Victor Lira <victorm.lira@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
The smoke tests when successful complete in about 5s. Don't waste
20min+ on failure, shorten the timeout to 120s
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Check if xen.efi is bootable with an XTF dom0.
The multiboot2+EFI path is tested on hardware tests already.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
TEST_TIMEOUT is set as a CI/CD project variable, as it should be, to
match the capability and speed of the testing infrastructure.
As it turns out, TEST_TIMEOUT defined in test.yaml cannot override
TEST_TIMEOUT defined as CI/CD project variable. As a consequence, today
the TEST_TIMEOUT setting in test.yaml for the Xilinx jobs is ignored.
Instead, rename TEST_TIMEOUT to TEST_TIMEOUT_OVERRIDE in test.yaml and
check for TEST_TIMEOUT_OVERRIDE first in console.exp.
Signed-off-by: Stefano Stabellini <stefano.stabellini@amd.com>
Reviewed-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
The test showed unreliable behavior due to unsupported console settings.
Update the baud rate used to connect to the UART.
Signed-off-by: Victor Lira <victorm.lira@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Fixes: 95764a0817 (automation: update xilinx test scripts (tty))
This patch introduced a CI failure due to a timeout in xilinx-x86_64 test.
Change xilinx-x86_64 and xilinx-arm64 scripts to use "expect" utility
to determine test result and allow early exit from tests.
Add "expect" to xilinx container environment (dockerfile).
Rename references to "QEMU" in "qemu-key.exp" expect script to "TEST" to be
used by both QEMU and hardware tests.
Signed-off-by: Victor Lira <victorm.lira@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Update serial device names from ttyUSB* to test board specific names.
Update xilinx-smoke-dom0-x86_64 with new Xen command line console options,
which are now set as Gitlab CI/CD variables. Abstract the directory where
binaries are stored. Increase the timeout to match new setup.
Signed-off-by: Victor Lira <victorm.lira@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Add a test script and related job for running x86_64 dom0 tests.
Signed-off-by: Victor Lira <victorm.lira@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
The containers are both much smaller, with stable toolchains over time, and
this at least means we're not doing all testing with a single compiler.
Rename the jobs to follow to sort coherently ($DISTRO-$VERSION-$ARCH-*) and
reposition the jobs to optimise starting the smoke test.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Anthony PERARD <anthony.perard@vates.tech>
Reviewed-by: Oleksii Kurochko <oleksii.kurochko@gmail.com>
Release-Acked-By: Oleksii Kurochko <oleksii.kurochko@gmail.com>
qemu-system-ppc64/8.1.0-ppc64 was added because bullseye's QEMU didn't
understand the powernv9 machine. However bookworm's QEMU does and this is
preferable to maintaining a random build of QEMU ourselves.
Use the debian:12-ppc64le container and test the output of that build too.
Remove qemu-system-ppc64-8.1.0-ppc64-export which is unused now.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Anthony PERARD <anthony.perard@vates.tech>
Release-Acked-By: Oleksii Kurochko <oleksii.kurochko@gmail.com>
This tests if QEMU works in PVH dom0. QEMU in dom0 requires enabling TUN
in the kernel, so do that too.
Add it to both x86 runners, similar to the PVH domU test.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Release-Acked-By: Oleksii Kurochko <oleksii.kurochko@gmail.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
At the moment, all the Arm64 Qemu tests use GICv2 which is the default
GIC version used by Qemu. Improve the coverage by adding a new test in
which Qemu will be configured to have GICv3.
Rename host device tree name to "virt.dtb" to be GIC version agnostic.
Use "gic-version" Qemu option to select the version to use. Unless the
test variant is set to "gicv3", version 2 will be used.
Signed-off-by: Michal Orzel <michal.orzel@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Introduce qemu based Arm earlyprintk test and build jobs to cover this
feature in debug variant. The tests simply check for the presence of the
last message printed by the bootstrap code before entering the C world.
Signed-off-by: Michal Orzel <michal.orzel@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
To save some bandwith that can be later on used to increase the test
coverage by adding new tests, drop the following non-debug test/build
jobs existing in both debug and non-debug variants:
- static memory (arm64, arm32)
- static shared memory (arm64)
- static heap (arm64)
- boot cpupools (arm64)
- gzip (arm32)
More generic tests existing in both variants were left unmodified.
Signed-off-by: Michal Orzel <michal.orzel@amd.com>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
Current issues with this test are:
- when the job timeout, the log file is lost as there is no chance to
run the `mv` command.
- GitLab job log is limited in size, so one usually have to download
the artifacts, which may be missing.
Use $GITLAB_CI to detect when the script is run as part of a GitLab
pipeline. GitLab will add "GITLAB_CI=true" in the environment
variables.
When run as part of $GITLAB_CI, ignore "dirty" worktree to allow to
write "build-each-commit-gcc.log", which can then be grabbed as
artifacts, even when the job timeout. The `git clean` command is
changed to keep those build logs.
When run as part of $GITLAB_CI, we will also store the build output in
a log file instead of writing it to stdout, because GitLab's job log
is limited. But we will write the log to stdout in case of error, so
we can find out more quickly why there's been an error.
This patch also make use of a GitLab feature, "log sections", which we
will collapse by default. One section per commit been built.
There's a bit of colour added to the logs.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
Switch tests using Stretch to Bookworm, as Stretch is EOL.
Note the packages are not removed from the Stretch dockerfile, because the
tests in stable branches will run using the old containers.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Checking /proc/interrupts is unreliable because different drivers set
different names there. Install pciutils and use lspci instead.
In fact, the /proc/interrupts content was confusing enough that
adl-pci-hvm had it wrong (MSI-X is in use there). Fix this too.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Release-acked-by: Henry Wang <Henry.Wang@arm.com>
Run ppc64le tests with the PowerNV machine type (bare metal) instead of
the paravirtualized pseries machine. This requires a more modern version
of QEMU than is present in debian bullseye's repository, so update the
dockerfile to build QEMU from source.
Support for booting on pseries was broken by 74b725a64d ('xen/ppc:
Implement initial Radix MMU support') which resulted in CI failures. In
preparation for removing pseries support entirely, switch the CI
infrastructure to the PowerNV machine type.
Signed-off-by: Shawn Anastasio <sanastasio@raptorengineering.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
On failure of "build"-each-commit script, the next command that move
the log back into the build directory isn't executed. Fix that by
using "after_script" which is always executed even if the main
"script" fails. (We would still miss the log when the jobs times out.)
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Marek Marczykowski-Górecki