Commit df29d03f1d ("libxc/x86: avoid certain overflows in CPUID APIC ID
adjustments" introduced a one bit too narrow mask when checking whether
multiplying by 1 (in particular in leaf 1) would result in overflow.
Reported-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Recent AMD processors may report up to 128 logical processors in CPUID
leaf 1. Doubling this value produces 0 (which OSes sincerely dislike),
as the respective field is only 8 bits wide. Suppress doubling the value
(and its leaf 0x80000008 counterpart) in such a case.
Note that while there's a similar overflow in intel_xc_cpuid_policy(),
that one is being left alone for now.
Note further that while it was considered to suppress the multiplication
by 2 altogether if the host topology already provides at least one bit
of thread ID within APIC IDs, it was decided to avoid more change here
than really needed at this point.
Also zap leaf 4 (and at the same time leaf 2) EDX output for AMD, as it
should have been from the beginning.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
The following libxl API became asynchronous and gained an additional
`ao_how' parameter:
libxl_domain_pause()
libxl_domain_unpause()
libxl_send_trigger()
Adapt the ocaml binding.
Build tested only.
Fixes: edaa631ddc
Fixes: 95627b87c3
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Handle += of both strings and lists.
If += is used for config options expected to be numbers, then a
warning is printed and the config option ignored (because xl ignores
config options with errors).
This is to be used for development purposes, where modifying config
option can be done on the `xl create' command line.
One could have a cmdline= in the cfg file, and specify cmdline+= on
the `xl create` command line without the need to write the whole
cmdline in `xl' command line but simply append to the one in the cfg file.
Or add an extra vif or disk by simply having "vif += [ '', ];" in the
`xl' cmdline.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
An incremental build of tools/include won't pickup new hypervisor
headers in tools/include/xen. Fix that.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Functions pci_add_qemu_trad_watch_state_cb and
pci_remove_qemu_trad_watch_state_cb are similar so the common part is
extracted in a different function.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Removed libxl__qmp_cpu_add since it's not used anymore.
`cpumap' arg of libxl__set_vcpuonline_xenstore is constified.
The QMP command "query-cpus" is going to be called from different
places, so the algorithm that parse the answer is in a separate
function, qmp_parse_query_cpus.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
This patch also replaces the use of
libxl__wait_for_device_model_deprecated() by its equivalent
without the need for a thread.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
This is in preparation of using asynchronous operation to communicate
with QEMU via QMP (libxl__ev_qmp).
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
This patch also replaces the use of
libxl__wait_for_device_model_deprecated() by its equivalent
without the need for a thread.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
QEMU upstream (or qemu-xen) may not have set "running" state in
xenstore. "running" with QEMU doesn't mean that the binary is
running, it means that the emulation have started. When adding a
pci-passthrough device to QEMU, we do so via QMP, we have a direct
answer to whether QEMU is running or not, no need to check ahead.
Moving the check to do it only with qemu-trad makes upcoming changes
simpler.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
do_pci_add is going to be asynchronous, so we start by having a single
path out of the function. All `return`s instead set rc and goto out.
While here, some use of `rc' was used to store the return value of
libxc calls, change them to store into `r'. Also, add the value of `r'
in the error message of those calls.
There were an `out' label that was use it seems to skip setting up the
IRQ, the label has been renamed to `out_no_irq'.
No functional changes.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
This also mean libxl__initiate_device_usbctrl_remove, which uses
libxl__device_usbdev_remove synchronously, needs to be updated to use
it with multidev.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
These two fields help to give more information about the device been
hotplug/hotunplug to callbacks.
There is already `dev' of type `libxl__device', but it is mostly
useful when the backend/frontend is xenstore. Some device (like
`usbdev') don't have devid, so `dev' can't be used.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
`aodev->qmp' is initialised in libxl__prepare_ao_device(), but since
there isn't a single exit path for a `libxl__ao_device', users of this
new `qmp' field will have to disposed of it.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Having the function do_usbdev_remove makes it harder to add asynchronous
calls into it. Move its body back into libxl__device_usbdev_remove and
adjust the latter as there are no reason to have a separated function.
No functional changes.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Having the function do_usbdev_add makes it harder to add asynchronous
calls into it. Move its body back into libxl__device_usbdev_add and
adjust the latter as there are no reason to have a separated function.
No functional changes.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
libxl__domain_unpause is a reimplementation of
libxl__domain_unpause_deprecated with asynchronous operation.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
libxl__domain_resume is a rework libxl__domain_resume_deprecated. It
makes uses of ev_xswatch and ev_qmp, to replace synchronous QMP calls
and libxl__wait_for_device_model_deprecated call.
This patch also introduce libxl__dm_resume which is a sub-operation of
both libxl__domain_resume and libxl__domain_unpause and can be used
instead of libxl__domain_resume_device_model_deprecated.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
These two functions are used from many places in libxl and need to
change to be able to accomodate libxl__ev_qmp calls and thus needs to
be asynchronous.
(There is also libxl__domain_resume_device_model in the mix.)
A later patch will introduce a new libxl__domain_resume and
libxl__domain_unpause which will make use of libxl__ev_qmp.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Setup a timeout of 10s for all the commands. It used to be about 5s
per commands.
The order of command is changed, we call 'query-vnc' before
'change-vnc-password', but that should not matter. That makes it
easier to call 'change-vnc-password' conditionally.
Also 'change' command is replaced by 'change-vnc-password'
because 'change' is deprecated. The new command is available in all
QEMU versions that also have Xen support.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
libxl__qmp_initializations is part of the device domain startup, it
queries information about the newly spawned QEMU and do some
post-startup configuration. So the function call doesn't belong to the
general domain creation, but only to the device model part of the
process, thus the call belong to libxl_dm and libxl__dm_spawn_state's
machinery.
We move the call ahead of a follow-up patch which going to "inline"
libxl__qmp_initializations.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
libxl_domain_unpause needs to make QMP calls, which are asynchronous,
change the API to reflect that.
Do the same with libxl_domain_pause async, even if it will keep
completing synchronously.
Also fix some coding style issue in those functions.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
The functions that calls usbctrl_getinfo() only needs information that
can be found in a `libxl_device_usbctrl'. So avoid calling
libxl_device_usbctrl_getinfo and call libxl_devid_to_device_usbctrl
instead. (libxl_device_usbctrl_getinfo needs a `libxl_device_usbctrl'
anyway.)
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Two functions in generate `libxl_device_usbctrl' can be replaced by
generic macro:
- libxl_device_usbctrl_list -> LIBXL_DEFINE_DEVICE_LIST
- libxl_devid_to_device_usbctrl -> LIBXL_DEFINE_DEVID_TO_DEVICE
This patch only needs to define `libxl__usbctrl_devtype.from_xenstore'
to makes use of them.
Small change, libxl_devid_to_device_usbctrl doesn't list all usbctrl
anymore before finding the right one.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
The libxl_device_TYPE parameter of all the libxl_device_TYPE_getinfo
function seems to be only used as input to find more information to bi
stored in the libxl_TYPEinfo parameter.
Make sure this is always true and constify the input parameter to avoid
further mistake.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
`usbctrl' is modified in this function which doesn't seems to be
intended, and usbctrlinfo.backend_id was never modified.
Take this opportunity to consify the argument `usbctrl' in libxl API
to avoid similar mistake.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Replace the assert(0) by abort() since the intention in libxl is that
asserts are always compiled in. This patch makes its clear and removes
the need to deal with asserts been compiled out.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
ao->domid isn't a reliable way of getting a domid, it might not be set
(this isn't the case here). The right domid value can be found in the
libxl__device (which is the device we want to remove) attached to
libxl__ao_device.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
- dom_path isn't used anymore in that function, remove it.
- Use `r' to store return value of external calls.
- Use `CTX', no need for a local `ctx'.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
sdss->pvqemu wasn't initialiased and disposed of properly.
Also, move the initialisation of sdss->xswait with the rest of the
initialisation of sdss.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Jan Beulich
Anthony PERARD
Juergen Gross