Currently libxl_cpuid_policy_list is an opaque type to the users of
libxl, and internally it's an array of xc_xend_cpuid objects.
Change the type to instead be a structure that contains one array for
CPUID policies, in preparation for it also holding another array for
MSR policies.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
(cherry picked from commit 4825d19603)
Introduce a new domain create field so that toolstack can specify the
maximum grant table version usable by the domain. This is plumbed into
xl and settable by the user as max_grant_version.
Previously this was only settable on a per host basis using the
gnttab command line option.
Note the version is specified using 4 bits, which leaves room to
specify up to grant table version 15. Given that we only have 2 grant
table versions right now, and a new version is unlikely in the near
future using 4 bits seems more than enough.
xenstored stubdomains are limited to grant table v1 because the
current MiniOS code used to build them only has support for grants v1.
There are existing limits set for xenstored stubdomains at creation
time that already match the defaults in MiniOS.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Christian Lindig <christian.lindig@citrix.com>
Reviewed-by: Ian Jackson <iwj@xenproject.org>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Release-Acked-by: Ian Jackson <iwj@xenproject.org>
In order to let the toolstack be able to set the gnttab version on a
per-domain basis, it needs to know which ABIs Xen supports. Introduce
XEN_SYSCTL_PHYSCAP_gnttab_v{1,2} for the purpose, and plumb in down into
userspace.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Christian Lindig <christian.lindig@citrix.com>
Reviewed-by: Ian Jackson <iwj@xenproject.org>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Releae-Acked-by: Ian Jackson <iwj@xenproject.org>
We need to pass info about maximum supported guest physical
address space size to the toolstack on Arm in order to properly
calculate the base and size of the extended region (safe range)
for the guest. The extended region is unused address space which
could be safely used by domain for foreign/grant mappings on Arm.
The extended region itself will be handled by the subsequent
patch.
Currently the same guest physical address space size is used
for all guests (p2m_ipa_bits variable on Arm, the x86 equivalent
is hap_paddr_bits).
Add an explicit padding after "gpaddr_bits" field and also
(while at it) after "domain" field.
Also make sure that full structure is cleared in all cases by
moving the clearing into getdomaininfo(). Currently it is only
cleared by the sysctl caller (and only once).
Please note, we do not need to bump XEN_DOMCTL_INTERFACE_VERSION
as a bump has already occurred in this release cycle. But we do
need to bump XEN_SYSCTL_INTERFACE_VERSION as the structure is
re-used in a sysctl.
Suggested-by: Julien Grall <jgrall@amazon.com>
Signed-off-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Reviewed-by: Ian Jackson <iwj@xenproject.org>
[hypervisor parts]
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Add parameter vpmu to xl domain configuration syntax
to enable the access to PMU registers by disabling
the PMU traps(currently only for ARM).
The current status is that the PMU registers are not
virtualized and the physical registers are directly
accessible when this parameter is enabled. There is no
interrupt support and Xen will not save/restore the
register values on context switches.
According to Arm Arm, section D7.1:
"The Performance Monitors Extension is common
to AArch64 operation and AArch32 operation."
That means we have an ensurance that if PMU is
present in one exception state, it must also be
present in the other.
Please note that this feature is experimental.
Signed-off-by: Michal Orzel <michal.orzel@arm.com>
Signed-off-by: Julien Grall <julien@xen.org>
Reviewed-by: Bertrand Marquis <bertrand.marquis@arm.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Ian Jackson <iwj@xenproject.org>
Introduce flag XEN_SYSCTL_PHYSCAP_vpmu which
indicates whether the platform supports vPMU
functionality. Modify Xen and tools accordingly.
Take the opportunity and fix XEN_SYSCTL_PHYSCAP_vmtrace
definition in sysctl.h which wrongly use (1 << 6)
instead of (1u << 6).
Signed-off-by: Michal Orzel <michal.orzel@arm.com>
Reviewed-by: Bertrand Marquis <bertrand.marquis@arm.com>
Acked-by: Nick Rosbrook <rosbrookn@ainfosec.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Acked-by: Ian Jackson <iwj@xenproject.org>
Acked-by: Christian Lindig <christian.lindig@citrix.com>
This adds an option to the xl domain configuration file syntax for specifying
a kernel command line for device-model stubdomains. It is intended for use with
Linux-based stubdomains.
Signed-off-by: Scott Davis <scott.davis@starlab.io>
Reviewed-by: Jason Andryuk <jandryuk@gmail.com>
Acked-by: Ian Jackson <iwj@xenproject.org>
Introduce an option to allow selecting a behavior similar to the pre
Xen 4.15 one for accesses to MSRs not explicitly handled. Since commit
84e848fd7a and 322ec7c89f accesses to MSRs not explicitly
handled by Xen result in the injection of a #GP to the guest. This
is a behavior change since previously a #GP was only injected if
accessing the MSR on the real hardware would also trigger a #GP, or if
the attempted to be set bits wouldn't match the hardware values (for
PV). The reasons for not leaking hardware MSR values and injecting a
#GP are fully valid, so the solution proposed here should be
considered a temporary workaround until all the required MSRs are
properly handled.
This seems to be problematic for some guests, so introduce an option
to fallback to this kind of legacy behavior without leaking the
underlying MSR values to the guest.
When the option is set, for both PV and HVM don't inject a #GP to the
guest on MSR read if reading the underlying MSR doesn't result in a
#GP, do the same for writes and simply discard the value to be written
on that case.
Note that for guests restored or migrated from previous Xen versions
the option is enabled by default, in order to keep a compatible
MSR behavior. Such compatibility is done at the libxl layer, to avoid
higher-level toolstacks from having to know the details about this flag.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Christian Lindig <christian.lindig@citrix.com>
Reviewed-by: Ian Jackson <iwj@xenproject.org>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Tested-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Release-Acked-by: Ian Jackson <iwj@xenproject.org>
We're about to introduce support for Intel Processor Trace, but similar
functionality exists in other platforms.
Aspects of vmtrace can reasonably can be common, so start with
XEN_SYSCTL_PHYSCAP_vmtrace and plumb the signal from Xen all the way down into
`xl info`.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
If Viridian extensions are enabled, Windows wouldn't currently allow
a hotplugged vCPU to be brought up dynamically. We need to expose a special
bit to let the guest know we allow it. Hide it behind an option to stay
on the safe side regarding compatibility with existing guests but
nevertheless set the option on by default.
Signed-off-by: Igor Druzhinin <igor.druzhinin@citrix.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
TLFS 7.8.1 stipulates that "a virtual processor index must be less than
the maximum number of virtual processors per partition" that "can be obtained
through CPUID leaf 0x40000005". Furthermore, "Requirements for Implementing
the Microsoft Hypervisor Interface" defines that starting from Windows Server
2012, which allowed more than 64 CPUs to be brought up, this leaf can now
contain a value -1 basically assuming the hypervisor has no restriction while
0 (that we currently expose) means the default restriction is still present.
Along with the previous changes exposing ExProcessorMasks this allows a recent
Windows VM with Viridian extension enabled to have more than 64 vCPUs without
going into BSOD in some cases.
Since we didn't expose the leaf before and to keep CPUID data consistent for
incoming streams from previous Xen versions - let's keep it behind an option.
Signed-off-by: Igor Druzhinin <igor.druzhinin@citrix.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
... and modify libxl_pci_bdf_assignable_add/remove/list() to make use of it.
libxl_pci_bdf_assignable_add() will store the name of the device in xenstore
if the field is specified (i.e. non-NULL) and libxl_pci_bdf_assignable_remove()
will remove devices specified only by name, looking up the BDF as necessary.
libxl_pci_bdf_assignable_list() will also populate the 'name' field if a name
was stored by libxl_pci_bdf_assignable_add().
NOTE: This patch also fixes whitespace in the declaration of 'libxl_device_pci'
in the IDL.
Signed-off-by: Paul Durrant <pdurrant@amazon.com>
Acked-by: Wei Liu <wl@xen.org>
This patch reverts eight patches from staging.
The offending patch is the one that introduced libxl_pci_bdf (last one
in the list). The rest depend on that patch so they are also reverted.
8bf0fab142 "libxl / libxlu: support 'xl pci-attach/detach' by name"
e1141654c3 "docs/man: modify xl-pci-configuration(5) to add 'name' field to PCI_SPEC_STRING"
93c16ae47b "xl: support naming of assignable devices"
5ab684cb3e "libxl: introduce libxl_pci_bdf_assignable_add/remove/list/list_free(), ..."
66c2fbc6e8 "libxl: convert internal functions in libxl_pci.c..."
f73c5dd56d "docs/man: modify xl(1) in preparation for naming of assignable devices"
96ed6ff297 "libxlu: introduce xlu_pci_parse_spec_string()"
929f231140 "libxl: introduce 'libxl_pci_bdf' in the idl..."
Signed-off-by: Wei Liu <wl@xen.org>
This patch adds a 'name' field into the idl for 'libxl_device_pci' and
libxlu_pci_parse_spec_string() is modified to parse the new 'name'
parameter of PCI_SPEC_STRING detailed in the updated documention in
xl-pci-configuration(5).
If the 'name' field is non-NULL then both libxl_device_pci_add() and
libxl_device_pci_remove() will use it to look up the device BDF in
the list of assignable devices.
Signed-off-by: Paul Durrant <pdurrant@amazon.com>
Acked-by: Wei Liu <wl@xen.org>
which support naming and use 'libxl_pci_bdf' rather than 'libxl_device_pci',
as replacements for libxl_device_pci_assignable_add/remove/list/list_free().
libxl_pci_bdf_assignable_add() takes a 'name' parameter which is stored in
xenstore and facilitates two addtional functions added by this patch:
libxl_pci_bdf_assignable_name2bdf() and libxl_pci_bdf_assignable_bdf2name().
Currently there are no callers of these two functions. They will be added in
a subsequent patch.
libxl_device_pci_assignable_add/remove/list/list_free() are left in place
for compatibility but are re-implemented in terms of the newly introduced
functions.
Signed-off-by: Paul Durrant <pdurrant@amazon.com>
Acked-by: Wei Liu <wl@xen.org>
... and use in 'libxl_device_pci'
This patch is preparatory work for restricting the type passed to functions
that only require BDF information, rather than passing a 'libxl_device_pci'
structure which is only partially filled. In this patch only the minimal
mechanical changes necessary to deal with the structural changes are made.
Subsequent patches will adjust the code to make better use of the new type.
Signed-off-by: Paul Durrant <pdurrant@amazon.com>
Acked-by: Wei Liu <wl@xen.org>
Acked-by: Nick Rosbrook <rosbrookn@ainfosec.com>
... to be used by callers of libxl_device_pci_assignable_list().
Currently there is no API for callers of libxl_device_pci_assignable_list()
to free the list. The xl function pciassignable_list() calls
libxl_device_pci_dispose() on each element of the returned list, but
libxl_pci_assignable() in libxl_pci.c does not. Neither does the implementation
of libxl_device_pci_assignable_list() call libxl_device_pci_init().
This patch adds the new API function, makes sure it is used everywhere and
also modifies libxl_device_pci_assignable_list() to initialize list
entries rather than just zeroing them.
Signed-off-by: Paul Durrant <pdurrant@amazon.com>
Acked-by: Christian Lindig <christian.lindig@citrix.com>
Reviewed-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Acked-by: Wei Liu <wl@xen.org>
... devices.
Currently there is an assumption built into libxl__device_list() that device
backends are fully enumarated under the '/libxl' path in xenstore. This is
not the case for PCI backend devices, which are only properly enumerated
under '/local/domain/0/backend'.
This patch adds a new get_path() method to libxl__device_type to allow a
backend implementation (such as PCI) to specify the xenstore path where
devices are enumerated and modifies libxl__device_list() to use this method
if it is available. Also, if the get_num() method is defined then the
from_xenstore() method expects to be passed the backend path without the device
number concatenated, so this issue is also rectified.
Having made libxl__device_list() work correctly, this patch removes the
open-coded libxl_pci_device_pci_list() in favour of an evaluation of the
LIBXL_DEFINE_DEVICE_LIST() macro. This has the side-effect of also defining
libxl_pci_device_pci_list_free() which will be used in subsequent patches.
Signed-off-by: Paul Durrant <pdurrant@amazon.com>
Reviewed-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Acked-by: Wei Liu <wl@xen.org>
The seemingly arbitrary use of 'pci' and 'pcidev' in the code in libxl_pci.c
is confusing and also compromises use of some macros used for other device
types. Indeed it seems that DEFINE_DEVICE_TYPE_STRUCT_X exists solely because
of this duality.
This patch purges use of 'pcidev' from the libxl internal code, but
unfortunately the 'pcidevs' and 'num_pcidevs' fields in 'libxl_domain_config'
are part of the API and need to be retained to avoid breaking callers,
particularly libvirt.
DEFINE_DEVICE_TYPE_STRUCT_X is still removed to avoid the special case in
libxl_pci.c but DEFINE_DEVICE_TYPE_STRUCT is given an extra 'array' argument
which is used to identify the fields in 'libxl_domain_config' relating to
the device type.
NOTE: Some of the more gross formatting errors (such as lack of spaces after
keywords) that came into context have been fixed in libxl_pci.c.
Signed-off-by: Paul Durrant <pdurrant@amazon.com>
Acked-by: Wei Liu <wl@xen.org>
Adding the new value into the enumeration makes it immediately available
to xl, so this patch adjusts the xl.cfg(5) documentation accordingly.
Signed-off-by: Paul Durrant <pdurrant@amazon.com>
Acked-by: Wei Liu <wl@xen.org>
Instead of each library having an own include directory move the
official headers to tools/include instead. This will drop the need to
link those headers to tools/include and there is no need any longer
to have library-specific include paths when building Xen.
While at it remove setting of the unused variable
PKG_CONFIG_CFLAGS_LOCAL in libs/*/Makefile.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Christian Lindig <christian.lindig@citrix.com>
Tested-by: Bertrand Marquis <bertrand.marquis@arm.com>
Acked-by: Ian Jackson <iwj@xenproject.org>
Roger Pau Monne
Andrew Cooper
Oleksandr Tyshchenko
Michal Orzel
Scott Davis
Michał Leszczyński
Igor Druzhinin
Paul Durrant
Wei Liu
Juergen Gross