The error messages that the compiler may emit can be confusing.
The check was also the wrong way round in case multiple make targets are
specified: We want to do the check whenever targets other than the running
and cleaning ones are specified.
Fixes: 05f4cc2192 ("x86emul: suppress default test harness build with incapable compiler")
Fixes: d5997399b7 ("x86emul: suppress "not built" warning for test harness'es run targets")
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
master commit: c482d1f59f
master date: 2025-11-24 11:28:47 +0100
Many *.c files are symlinked while building, so along with generated *.h
files they ought to be removed. Conversely $(TARGET) doesn't need removing
twice.
Fixes: cb4fcf70b2 ("x86emul: parallelize SIMD test code building")
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
master commit: 774c382b28
master date: 2025-11-13 09:08:27 +0100
Otherwise it's not possible for device models to map IRQs of devices on
segments different than 0. Keep the same function prototype and pass the
segment in the high 16bits of the bus parameter, like it's done for the
hypercall itself.
Amends: 7620c0cf9a ("PCI multi-seg: add new physdevop-s")
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Anthony PERARD <anthony.perard@vates.tech>
master commit: b7838d12bd
master date: 2025-10-21 16:56:19 +0100
64-bit BAR memory address is truncated when removing a passthrough
pci device from guest since it uses "unsigned int".
So, change to use 64-bit type to fix this problem.
This is XSA-476 / CVE-2025-58149.
Fixes: b0a1af6167 ("libxenlight: implement pci passthrough")
Signed-off-by: Jiqian Chen <Jiqian.Chen@amd.com>
Release-Acked-by: Oleksii Kurochko <oleksii.kurochko@gmail.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Acked-by: Anthony PERARD <anthony.perard@vates.tech>
(cherry picked from commit 421432b822)
PVH guests have no DM, so this causes the guest to fetch the online CPU
bitmap from an unbacked 0xaf00 PIO port when executing the GPE handler.
Seeing how ACPI CPU hotplug is the only event delivered via GPE, remove
the GPE handler in addition to anything ACPI CPU hotplug related.
This shrinks PVH's DSDT substantially and prevents spuriously executing
a large amount of AML with no purpose at all.
Fixes: 062975dc9441("acpi: PVH guests need _E02 method")
Signed-off-by: Alejandro Vallejo <alejandro.garciavallejo@amd.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
master commit: b59e564aa0
master date: 2025-09-25 09:18:55 +0200
SMBIOS specification dictates that tables should have a minimal length.
This commit introduces further validation for user-input SMBIOS tables.
As per SMBIOS Reference Specification:
* Type 0: For version 2.3 and later implementations, the length is at least 14h
* Type 1: 1Bh for 2.4 and later
* Type 2: at least 08h
* Type 3: 0Dh for version 2.1 and later
* Type 11: 5h (+ strings)
* Type 22: 1Ah (+ strings)
* Type 39: a minimum of 10h
Notably, this also fixes previously incorrect check for chassis handle in
smbios_type_2_init. Chassis handle is a WORD, therefore, the condition now
correctly checks for >= 13 instead of > 13.
hvmloader currently implements version 2.4
Furthermore, this commit introduces smbios_pt_copy helper function to substitute
previously repeating pattern of locating the struct in physical memory (via
get_smbios_pt_struct), checking the length and copying it into SMBIOS region.
Fixes: 4d23036e70 ("HVM firmware passthrough SMBIOS processing")
Signed-off-by: Petr Beneš <w1benny@gmail.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
master commit: 2f7d52f016
master date: 2025-08-27 11:26:33 +0200
* `sizeof_field` returns the size of a specific struct member
* `endof_field` returns the offset to the end of the member within the struct
It will be useful in upcoming layout checks of SMBIOS structs.
Signed-off-by: Petr Beneš <w1benny@gmail.com>
Acked-by: Anthony PERARD <anthony.perard@vates.tech>
master commit: 17e66ca918
master date: 2025-08-27 11:26:33 +0200
SYMBOL_NAME_SIZE is 124, not 128. Use the symbolic name there as well,
to avoid any disconnect.
While there correct indentation on the following line as well.
Coverity ID: 1659391
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Alejandro Vallejo <alejandro.garciavallejo@amd.com>
Acked-by: Anthony PERARD <anthony.perard@vates.tech>
master commit: dfabb3fee3
master date: 2025-07-31 14:44:02 +0200
If the total returned by Xen is more than the number of elements
allocated, it means that the buffer was too small and so the data is
incomplete. Retry to get all the data.
Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Reviewed-by: Anthony PERARD <anthony.perard@vates.tech>
master commit: 1ff7f87e8f
master date: 2025-06-11 11:07:00 +0200
xc_pm_get_pxstat() requires the caller to allocate the pt and trans_pt
buffers but then calls xc_pm_get_max_px() to determine how big they are
(and hence how much Xen will copy into them). This is susceptible to
races if xc_pm_get_max_px() changes so avoid the problem by requiring
the caller to also pass in the size of the buffers.
Suggested-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Reviewed-by: Anthony PERARD <anthony.perard@vates.tech>
master commit: de6a05a8a0
master date: 2025-06-11 11:06:45 +0200
The 2 missed ones are: register_runstate_phys_area and
register_vcpu_time_phys_area.
Fixes: d5df44275e ("domain: introduce GADDR based runstate area registration alternative")
Fixes: 60e544a8c5 ("x86: introduce GADDR based secondary time area registration alternative")
Signed-off-by: Gang Ji <gang.ji@cloud.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
master commit: ed939591e4
master date: 2025-06-11 11:08:11 +0200
Only access the HVM union b_info->u.hvm on HVM guests. The union
access is not guarded, so this reads and sets the default even on
non-HVM guests. Usually this doesn't matter as PV and PVH unions are
smaller and zero-initialized, but the zero default will be re-written as
a -1 boolean. Generally, it could incorrectly set b_info->altp2m
through aliased data.
Fixes: 0291089f6e ("xen: enable altp2m at create domain domctl")
Signed-off-by: Jason Andryuk <jason.andryuk@amd.com>
Acked-by: Anthony PERARD <anthony.perard@vates.tech>
master commit: 01dfd25509
master date: 2025-06-02 10:31:21 +0200
The Indirect Target Selection speculative vulnerability means that indirect
branches (including RETs) are unsafe when in the first half of a cacheline.
This means it's not safe for logic using the stubs to write raw 0xc3's.
Introduce place_ret() which, for now, writes a raw 0xc3 but will contain
additional logic when return thunks are in use.
stub_selftest() doesn't strictly need to be converted as they only run on
boot, but doing so gets us a partial test of place_ret() too.
No functional change.
This is part of XSA-469 / CVE-2024-28956
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
(cherry picked from commit 2eb1132f79)
It makes no sense to request for preprocessor only output and also request
object file generation. Fix the _libxl.api-for-check target to only use
-E (preprocessor output).
Also Clang 20.0 reports an error if both options are used.
Reported-by: Andrew Cooper <andrew.cooper3@citrix.com>
Fixes: 2862bf5b6c ('libxl: enforce prohibitions of internal callers')
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Anthony PERARD <anthony.perard@vates.tech>
(cherry picked from commit a235f856e4)
OCaml, in preparation for a renaming of the error string associated with
conversion failure in 'int_of_string' functions, started to issue this
warning:
File "process.ml", line 440, characters 13-28:
440 | | (Failure "int_of_string") -> reply_error "EINVAL"
^^^^^^^^^^^^^^^
Warning 52 [fragile-literal-pattern]: Code should not depend on the actual values of
this constructor's arguments. They are only for information
and may change in future versions. (See manual section 11.5)
Deal with this at the source, and instead create our own stable
ConversionFailure exception that's raised on the None case in
'int_of_string_opt'.
'c_int_of_string' is safe and does not raise such exceptions.
Signed-off-by: Andrii Sultanov <andrii.sultanov@cloud.com>
Acked-by: Christian Lindig <christian.lindig@cloud.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
master commit: c11772277f
master date: 2025-02-25 13:30:55 +0000
malloc(), when passed zero size, may return NULL (the behavior is
implementation defined). Mirror the ->gov_num check to the other two
allocations as well. Don't chance then actually using a NULL in
print_cpufreq_para().
Fixes: 75e06d089d ("xenpm: add cpu frequency control interface, through which user can")
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jason Andryuk <jason.andryuk@amd.com>
master commit: 6c0dc87bb0
master date: 2025-03-26 12:30:57 +0100
Infinitely retrying the rmdir() invocation makes little sense. While the
original observation was the log filling the disk (due to repeated
"Directory not empty" errors, in turn occurring for unclear reasons),
the loop wants breaking even if there was no error message being logged
(much like is done in the similar loops in libxl__remove_file() and
libxl__remove_file_or_directory()).
Fixes: c4dcbee67e ("libxl: provide libxl__remove_file et al")
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Acked-by: Anthony PERARD <anthony.perard@vates.tech>
master commit: 68baeb5c48
master date: 2025-03-13 10:23:10 +0100
Channels work differently than other device types: their devid should
be -1 initially in order to distinguish them from the primary console
which has the devid of 0.
So when parsing the channel configuration, use
ARRAY_EXTEND_INIT_NODEVID() in order to avoid overwriting the devid
set by libxl_device_channel_init().
Fixes: 3a66796347 ("libxl: set channel devid when not provided by application")
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Anthony PERARD <anthony.perard@vates.tech>
master commit: e1ccced4af
master date: 2025-03-05 16:37:37 +0100
This is actually what the caller acquire_resource() expects on any kind
of error (the comment on top of resource_max_frames() also suggests that).
Otherwise, the caller will treat -errno as a valid value and propagate incorrect
nr_frames to the VM. As a possible consequence, a VM trying to query a resource
size of an unknown type will get the success result from the hypercall and obtain
nr_frames 4294967201.
Also, add an ASSERT_UNREACHABLE() in the default case of _acquire_resource(),
normally we won't get to this point, as an unknown type will always be rejected
earlier in resource_max_frames().
Also, update test-resource app to verify that Xen can deal with invalid
(unknown) resource type properly.
Fixes: 9244528955 ("xen/memory: Fix acquire_resource size semantics")
Signed-off-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
master commit: 9b87082900
master date: 2025-02-18 14:47:34 +0000
Addition of FLASK permission for this hypercall was overlooked in the
original patch. Fix it. The only dt overlay operation is attaching that can
happen only after the domain is created. Dom0 can attach overlay to itself
as well.
Fixes: 4c733873b5 ("xen/arm: Add XEN_DOMCTL_dt_overlay and device attachment to domains")
Signed-off-by: Michal Orzel <michal.orzel@amd.com>
Acked-by: Daniel P. Smith <dpsmith@apertussolutions.com>
master commit: 7fa1411676
master date: 2025-01-08 13:05:50 +0100
Addition of FLASK permission for this hypercall was overlooked in the
original patch. Fix it. The only VUART operation is initialization that
can occur only during domain creation.
Fixes: 86039f2e8c ("xen/arm: vpl011: Add a new domctl API to initialize vpl011")
Signed-off-by: Michal Orzel <michal.orzel@amd.com>
Acked-by: Daniel P. Smith <dpsmith@apertussolutions.com>
master commit: 29daa72e40
master date: 2025-01-08 13:05:38 +0100
ocamlmklib has special handling for C-like '-Wl,-rpath' option, but does
not know how to handle '-Wl,-rpath-link', as evidenced by warnings like:
"Unknown option
-Wl,-rpath-link=$HOME/xen/tools/ocaml/libs/eventchn/../../../../tools/libs/toollog"
Pass this option directly to the compiler with -ccopt instead.
Also pass -L directly to the linker with -ldopt. This prevents embedding absolute
paths from buildtime into binary's RPATH.
Fixes: f7b4e4558b ("tools/ocaml: Fix OCaml libs rules")
Reported-by: Fernando Rodrigues <alpha@sigmasquadron.net>
Tested-by: Fernando Rodrigues <alpha@sigmasquadron.net>
Signed-off-by: Andrii Sultanov <andrii.sultanov@cloud.com>
Acked-by: Christian Lindig <christian.lindig@cloud.com>
master commit: bf8a209915
master date: 2024-12-11 10:45:08 +0000
xc_cpuid_apply_policy() provides compatibility for migration of a pre-4.14 VM
where no CPUID data was provided in the stream.
It guesses the various max-leaf limits, based on what was true at the time of
writing, but this was not correctly adapted when speculative security issues
forced the advertisement of new feature bits. Of note are:
* LFENCE-DISPATCH, in leaf 0x80000021.eax
* BHI-CTRL, in leaf 0x7[2].edx
In both cases, a VM booted on a security-patched Xen 4.13, and then migrated
on to any newer version of Xen on the same or compatible hardware would have
these features stripped back because Xen is still editing the cpu-policy for
sanity behind the back of the toolstack.
For VMs using BHI_DIS_S to mitigate Native-BHI, this resulted in a failure to
restore the guests MSR_SPEC_CTRL setting:
(XEN) HVM d7v0 load MSR 0x48 with value 0x401 failed
(XEN) HVM7 restore: failed to load entry 20/0 rc -6
Fixes: e9b4fe2636 ("x86/cpuid: support LFENCE always serialising CPUID bit")
Fixes: f3709b15fc ("x86/cpuid: Infrastructure for cpuid word 7:2.edx")
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
master commit: 28301682f4
master date: 2024-12-03 12:20:41 +0000
While result values and other status flags are unaffected as long as we
can ignore the case of registers having their upper 32 bits non-zero
outside of 64-bit mode, EFLAGS.SF may obtain a wrong value when we
mistakenly re-execute the original insn with VEX.W set.
Note that guest the memory access, if any, is correctly carried out as
32-bit regardless of VEX.W. The emulator-local memory operand will be
accessed as a 64-bit quantity, but it is pre-initialised to zero so no
internal state can leak.
Fixes: 771daacd19 ("x86emul: support BMI1 insns")
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
master commit: 1179d51dcb
master date: 2024-11-14 13:00:57 +0100
Xen 4.1 is more than a decade stale now. Use the same mechanism as elsewhere
in the tree to get the current version number.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Christian Lindig <christian.lindig@cloud.com>
Reviewed-by: Edwin Török <edwin.torok@cloud.com>
master commit: 1965e9a930
master date: 2024-08-23 15:02:27 +0100
These days, `ocamlopt -h` asks you whether you meant --help instead, meaning
that the $(shell ) invocation here isn't going end up containing '-g'.
Make it unconditional, like it is in OCAMLCFLAGS already.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Christian Lindig <christian.lindig@cloud.com>
Reviewed-by: Edwin Török <edwin.torok@cloud.com>
master commit: 126293eae6
master date: 2024-08-23 15:02:27 +0100
It's very rude for a library to play with signals behind the back of the
application, no matter ones views on the default behaviour of SIGPIPE under
POSIX. Even if the application doesn't care about the xenstored socket, it my
care about others.
This logic has existed since xenstore/xenstored was originally added in commit
29c9e570b1 ("Add xenstore daemon and library") in 2005.
It's also unnecessary. Pass MSG_NOSIGNAL when talking to xenstored over a
pipe (to avoid sucumbing to SIGPIPE if xenstored has crashed), and forgo any
playing with the signal disposition.
This has a side benefit of saving 2 syscalls per xenstore request.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jason Andryuk <jason.andryuk@amd.com>
master commit: a17b6db9b0
master date: 2024-07-23 15:11:27 +0100
With the input data now conveniently arranged, use writev()/sendmsg() instead
of decomposing it into write() calls.
This causes all requests to be submitted with a single system call, rather
than at least two. While in principle short writes can occur, the chances of
it happening are slim given that most xenbus comms are only a handful of
bytes.
Nevertheless, provide {writev,sendmsg}_exact() wrappers which take care of
resubmitting on EINTR or short write.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jason Andryuk <jason.andryuk@amd.com>
master commit: ebaeb0c64a
master date: 2024-07-23 15:11:27 +0100
We would like to writev() the whole outgoing message, but this is hard given
the current need to prepend the locally-constructed xsd_sockmsg.
Instead, have the caller provide xsd_sockmsg in iovec[0]. This in turn drops
the 't' and 'type' parameters from xs_talkv().
Note that xs_talkv() may alter the iovec structure. This may happen when
writev() is really used under the covers, and it's preferable to having the
lower levels need to duplicate the iovec to edit it upon encountering a short
write. xs_directory_part() is the only function impacted by this, and it's
easy to rearrange to be compatible.
No functional change.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jason Andryuk <jason.andryuk@amd.com>
master commit: e2a93bed8b
master date: 2024-07-23 15:11:27 +0100
If the sum of iov element lengths overflows, the XENSTORE_PAYLOAD_MAX can
pass, after which we'll write 4G of data with a good-looking length field, and
the remainder of the payload will be interpreted as subsequent commands.
Check each iov element length for XENSTORE_PAYLOAD_MAX before accmulating it.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jason Andryuk <jason.andryuk@amd.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
master commit: 42db2deb5e
master date: 2024-07-23 15:11:27 +0100
xen-hvmcrash would previously save records, overwrite the instruction
pointer with a bogus value, and then restore them to crash a domain
just enough to cause the guest OS to memdump.
This approach is found to be unreliable when tested on a guest running
Windows 10 x64, with some executions doing nothing at all.
Another approach would be to trigger NMIs. This approach is found to be
unreliable when tested on Linux (Ubuntu 22.04), as Linux will ignore
NMIs if it is not configured to handle such.
Injecting a double fault abort to all vCPUs is found to be more
reliable at crashing and invoking memdumps from Windows and Linux
domains.
This patch modifies the xen-hvmcrash tool to inject #DF to all vCPUs
belonging to the specified domain, instead of overwriting RIP.
Signed-off-by: Matthew Barnes <matthew.barnes@cloud.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
master commit: e42e4d8c3e
master date: 2024-07-22 10:50:03 +0100
Clang 19 complains with the following error when building libxl:
libxl_utils.c:48:15: error: variable length array folded to constant array as an extension [-Werror,-Wgnu-folding-constant]
48 | char path[strlen("/local/domain") + 12];
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~
Replace the usage of strlen() with sizeof, which allows the literal
string length to be known at build time. Note sizeof accounts for the
NUL terminator while strlen() didn't, hence subtract 1 from the total
size calculation.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Frediano Ziglio <frediano.ziglio@cloud.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Anthony PERARD <anthony.perard@vates.tech>
master commit: a7c7c3f642
master date: 2024-11-05 19:59:50 +0000
xl/libxl memory is leaking into a PVH guest through uninitialized
portions of the ACPI tables.
Use libxl_zalloc() to obtain zero-ed memory to avoid this issue.
This is XSA-464 / CVE-2024-45819.
Signed-off-by: Jason Andryuk <jason.andryuk@amd.com>
Fixes: 14c0d328da ("libxl/acpi: Build ACPI tables for HVMlite guests")
Reviewed-by: Jan Beulich <jbeulich@suse.com>
master commit: 0bfe567b58
master date: 2024-11-12 13:32:45 +0100
Drop explicit {evex} pseudo-prefixes. New gas (validly) complains when
they're used on things other than instructions. Our use was potentially
ahead of macro invocations - see simd.h's "override" macro.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
master commit: 3c09288298
master date: 2024-09-06 08:41:18 +0200
When built with ASAN, "xl dmesg" crashes in the "printf("%s", line)"
call in main_dmesg(). ASAN reports a heap buffer overflow: an
off-by-one access to cr->buffer.
The readconsole sysctl copies up to count characters into the buffer,
but it does not add a null character at the end. Despite the
documentation of libxl_xen_console_read_line(), line_r is not
nul-terminated if 16384 characters were copied to the buffer.
Fix this by asking xc_readconsolering() to fill the buffer up to size
- 1. As the number of characters in the buffer is only needed in
libxl_xen_console_read_line(), make it a local variable there instead
of part of the libxl__xen_console_reader struct.
Fixes: 4024bae739 ("xl: Add subcommand 'xl dmesg'")
Reported-by: Edwin Török <edwin.torok@cloud.com>
Signed-off-by: Javi Merino <javi.merino@cloud.com>
Reviewed-by: Anthony PERARD <anthony.perard@vates.tech>
master commit: bb03169bcb
master date: 2024-09-03 10:53:44 +0100
In "xl help", the output includes this line:
vsnd-list List virtual display devices for a domain
This should obviously say "sound devices" instead of "display devices".
Signed-off-by: John E. Krokes <mag@netherworld.org>
Reviewed-by: Juergen Gross <jgross@suse.com>
Acked-by: Anthony PERARD <anthony.perard@vates.tech>
master commit: 09226d165b
master date: 2024-08-14 08:49:44 +0200
Being able to recognize that "par" is reliably initialized on the 1st
loop iteration requires not overly old compilers.
Fixes: 7809132b1a ("tools/xen-9pfsd: add 9pfs response generation support")
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
master commit: 984cb316cb
master date: 2024-08-02 08:44:22 +0200
Currently, lsevtchn aborts its event channel enumeration when it hits
an event channel that is owned by Xen.
lsevtchn does not distinguish between different hypercall errors, which
results in lsevtchn missing potential relevant event channels with
higher port numbers.
Use the errno macro to distinguish between hypercall errors, and
continue event channel enumeration if the hypercall error is not
critical to enumeration.
Signed-off-by: Matthew Barnes <matthew.barnes@cloud.com>
Reviewed-by: Anthony PERARD <anthony.perard@vates.tech>
master commit: e92a453c8d
master date: 2024-08-02 08:43:57 +0200
"$dev" needs to be set correctly for backendtype=phy as well as
backendtype=tap. Move the setting into the conditional, so it can be
handled properly for each.
(dev could be captured during tap-ctl allocate for blktap module, but it
would not be set properly for the find_device case. The backendtype=tap
case would need to be handled regardless.)
Fixes: f16ac12bd4 ("hotplug: Restore block-tap phy compatibility")
Fixes: 76a484193d ("hotplug: Update block-tap")
Signed-off-by: Jason Andryuk <jason.andryuk@amd.com>
Reviewed-by: Anthony PERARD <anthony.perard@vates.tech>
Release-Acked-by: Oleksii Kurochko <oleksii.kurochko@gmail.com>
master commit: e4c7c2148a
master date: 2024-07-24 11:36:04 +0200
The final user was blktap2, removed in Xen 4.13.
Strip out the ./configure check for it, and stop explicitly installing it in
the FreeBSD testing.
Fixes: 2a556b63a2 ("Drop blktap2")
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Roger Pau Monné <roger.pau@citrix.com>
Release-Acked-by: Oleksii Kurochko <oleksii.kurochko@gmail.com>
set_cloexec() had a bit too much copy&pate from setnonblock(), and
insufficient testing on ancient versions of Linux...
As written (emulating ancient linux by undef'ing O_CLOEXEC), strace shows:
open("/dev/xen/xenbus", O_RDWR) = 3
fcntl(3, F_GETFL) = 0x8002 (flags O_RDWR|O_LARGEFILE)
fcntl(3, 0x8003 /* F_??? */, 0x7ffe4a771d90) = -1 EINVAL (Invalid argument)
close(3) = 0
which is obviously nonsense.
Switch F_GETFL -> F_GETFD, and fix the second invocation to use F_SETFD. With
this, strace is rather happer:
open("/dev/xen/xenbus", O_RDWR) = 3
fcntl(3, F_GETFD) = 0
fcntl(3, F_SETFD, FD_CLOEXEC) = 0
Fixes: bf7c146470 ("tools/libxs: Fix CLOEXEC handling in get_dev()")
Reported-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Release-Acked-by: Oleksii Kurochko <oleksii.kurochko@gmail.com>
We previously upped the minimum python version to 2.7, but neglected to
reflect this in ./configure
Fixes: 2a353c048c ("tools: Don't use distutils in configure or Makefile")
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Release-Acked-by: Oleksii Kurochko <oleksii.kurochko@gmail.com>
Jan Beulich
Andrew Cooper
Roger Pau Monné
Jiqian Chen
Alejandro Vallejo
Petr Beneš
Ross Lagerwall
Gang Ji
Jason Andryuk
Andrii Sultanov
Juergen Gross
Oleksandr Tyshchenko
Michal Orzel
Marek Marczykowski-Górecki
Matthew Barnes
Javi Merino
John E. Krokes
Julien Grall