BTC_NO indicates that hardware is not succeptable to Branch Type Confusion.
Zen3 CPUs don't suffer BTC.
This is part of XSA-407.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
libxl__xs_directory() can potentially return NULL without setting `n`.
As `n` isn't initialised, we need to check libxl__xs_directory()
return value before checking `n`. Otherwise, `n` might be non-zero
with `bdfs` NULL which would lead to a segv.
Fixes: 57bff091f4 ("libxl: add 'name' field to 'libxl_device_pci' in the IDL...")
Reported-by: "G.R." <firemeteor@users.sourceforge.net>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Tested-by: "G.R." <firemeteor@users.sourceforge.net>
Introduce a new per-domain creation x86 specific flag to
select whether hardware assisted virtualization should be used for
x{2}APIC.
A per-domain option is added to xl in order to select the usage of
x{2}APIC hardware assisted virtualization, as well as a global
configuration option.
Having all APIC interaction exit to Xen for emulation is slow and can
induce much overhead. Hardware can speed up x{2}APIC by decoding the
APIC access and providing a VM exit with a more specific exit reason
than a regular EPT fault or by altogether avoiding a VM exit.
On the other hand, being able to disable x{2}APIC hardware assisted
virtualization can be useful for testing and debugging purposes.
Note:
- vmx_install_vlapic_mapping doesn't require modifications regardless
of whether the guest has "Virtualize APIC accesses" enabled or not,
i.e., setting the APIC_ACCESS_ADDR VMCS field is fine so long as
virtualize_apic_accesses is supported by the CPU.
- Both per-domain and global assisted_x{2}apic options are not part of
the migration stream, unless explicitly set in the respective
configuration files. Default settings of assisted_x{2}apic done
internally by the toolstack, based on host capabilities at create
time, are not migrated.
Suggested-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Jane Malalane <jane.malalane@citrix.com>
Acked-by: Christian Lindig <christian.lindig@citrix.com>
Reviewed-by: "Roger Pau Monné" <roger.pau@citrix.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: George Dunlap <george.dunlap@citrix.com>
Add XEN_SYSCTL_PHYSCAP_X86_ASSISTED_XAPIC and
XEN_SYSCTL_PHYSCAP_X86_ASSISTED_X2APIC to report accelerated xAPIC and
x2APIC, on x86 hardware. This is so that xAPIC and x2APIC virtualization
can subsequently be enabled on a per-domain basis.
No such features are currently implemented on AMD hardware.
HW assisted xAPIC virtualization will be reported if HW, at the
minimum, supports virtualize_apic_accesses as this feature alone means
that an access to the APIC page will cause an APIC-access VM exit. An
APIC-access VM exit provides a VMM with information about the access
causing the VM exit, unlike a regular EPT fault, thus simplifying some
internal handling.
HW assisted x2APIC virtualization will be reported if HW supports
virtualize_x2apic_mode and, at least, either apic_reg_virt or
virtual_intr_delivery. This also means that
sysctl follows the conditionals in vmx_vlapic_msr_changed().
For that purpose, also add an arch-specific "capabilities" parameter
to struct xen_sysctl_physinfo.
Note that this interface is intended to be compatible with AMD so that
AVIC support can be introduced in a future patch. Unlike Intel that
has multiple controls for APIC Virtualization, AMD has one global
'AVIC Enable' control bit, so fine-graining of APIC virtualization
control cannot be done on a common interface.
Suggested-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Jane Malalane <jane.malalane@citrix.com>
Reviewed-by: "Roger Pau Monné" <roger.pau@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: George Dunlap <george.dunlap@citrix.com>
Acked-by: Christian Lindig <christian.lindig@citrix.com>
Allow administrators to notify a frontend driver that it's backend
counterpart is not to be trusted, so the frontend can deploy whatever
mitigations required in order to secure itself.
Allow such option for disk and network frontends only, as those are
the only hardened ones currently supported.
This is part of XSA-403
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
A leading underscore is used to indicate auto generated headers, and
the clean use of 'rm -f _*.h' will remove those. _xen_list.h also
uses a leading underscore, but is checked in the repo and as such
cannot be removed as part of the clean rule.
Fix this by dropping the leading underscore, so that the header is not
removed.
Fixes: a03b3552d4 ('libs,tools/include: Clean "clean" targets')
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
This new "Makefile.common" is intended to be used by both tools/ and
stubdom/ build system without stubdom needed to use tools/ build
system.
It should contain the necessary list of objects and CFLAGS needed to
build a static library.
Change stubdom/ to check Makefile.common, for the linkfarm.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
For PERL_FLAGS, use make's shell rather than a backquote.
Rather than relying on the VCS to create an empty directory for us,
we can create one before generating the *.c file for the bindings.
Make use of generic variable names to build a shared library from a
source file: CFLAGS, LDFLAGS, and LDLIBS.
To build a shared library, we need to build the source file with
"-fPIC", which was drop by 6d0ec05390 (tools: split libxenstat into
new tools/libs/stat directory).
The source file generated by swig seems to be missing many prototype for
many functions, so we need "-Wno-missing-prototypes" in order to
build it. Also, one of the prototype is deemed malformed, so we also
need "-Wno-strict-prototypes".
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Fix the dependency on the library, $(SHLIB) variable doesn't exist
anymore.
Rework dependency on the include file, we can let `swig` generate the
dependency for us with the use of "-M*" flags.
The xenstat.h file has moved so we need to fix the include location.
Rather than relaying on the VCS to create an empty directory for us,
we can create one before generating the *.c file for the bindings.
Make use of generic variable names to build a shared library from a
source file: CFLAGS, LDFLAGS, and LDLIBS.
Fix python's specific *flags by using python-config, and add them to
generic flags variables: CFLAGS, LDLIBS.
To build a shared library, we need to build the source file with
"-fPIC", which was drop by 6d0ec05390 (tools: split libxenstat into
new tools/libs/stat directory).
The source file generated by swig seems to be missing a prototype for
the "init" function, so we need "-Wno-missing-prototypes" in order to
build it.
Add some targets to .PHONY.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Remove '-Werror -Wmissing-progress -I./include $(CFLAGS_xeninclude)',
those flags are already added via "libs.mk".
Flag "-I." isn't needed, we just need to fix the #include of
"xg_core.h" as this header isn't expected to be installed.
Make use of "-iquote" instead of '-I' for double-quote included
headers.
Also, regroup the CFLAGS into the same place in the makefile.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
It seems a better name. Later, we will introduce LIBX86_OBJS to
collect lib/x86/* objects.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
The only thing done thing done with $(SRCS-y) is to replace ".c" by
".o". It is more useful to collect which object we want to build as
make will figure out how to build it and from which source file.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
There is no need for an extra "cleanlocal" target, we can use
double-colon rules instead.
Generated headers are now in tools/include/, so remove those file
there.
Remove -f flag as it's already in $(RM).
libs.mk:
- don't try to remove "*.rpm" anymore.
libs/light:
- "_paths.*.tmp" isn't created anymore.
- clean "libxenlight_test.so" and "libxl_test_*.opic".
libs/stat:
- don't remove $(DEPS_RM) from here as it is already done in
"libs.mk".
libs/util:
- fix clean of version-script file.
include/xen-foreign:
- remove __pycache__
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
There is no need for an extra "installlocal" target, we can use
double-colon rules instead.
"install-headers" in "libs/store" was introduced for the same reason
that "installlocal" exist, so it is replaced as well.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
LDLIBS is more appropriate and intended to be used to add library
dependencies. APPEND_LDFLAGS wasn't intended to be changed by the
build system.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Commit 92ea9c54fc ("arm/dom0less: assign dom0less guests to cpupools")
introduced a way to start a domain directly on a certain cpupool,
adding a "cpupool_id" member to struct xen_domctl_createdomain.
This was done to be able to start dom0less guests in different pools than
cpupool0, but the toolstack can benefit from it because it can now use
the struct member directly instead of creating the guest in cpupool0
and then moving it to the target cpupool.
Suggested-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Luca Fancellu <luca.fancellu@arm.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
libxl is leaking self pipes to child processes. These can be seen when
running with env var _LIBXL_DEBUG_EXEC_FDS=1:
libxl: debug: libxl_aoutils.c:593:libxl__async_exec_start: forking to execute: /etc/xen/scripts/vif-bridge online
[Detaching after fork from child process 5099]
libxl: execing /etc/xen/scripts/vif-bridge: fd 4 is open to pipe:[46805] with flags 0
libxl: execing /etc/xen/scripts/vif-bridge: fd 13 is open to pipe:[46807] with flags 0
libxl: execing /etc/xen/scripts/vif-bridge: fd 14 is open to pipe:[46807] with flags 0
libxl: execing /etc/xen/scripts/vif-bridge: fd 19 is open to pipe:[48570] with flags 0
libxl: execing /etc/xen/scripts/vif-bridge: fd 20 is open to pipe:[48570] with flags 0
(fd 3 is also open, but the check only starts at 4 for some reason.)
For xl, this is the poller created by libxl_ctx_alloc, the poller
created by do_domain_create -> libxl__ao_create, and the self pipe for
libxl__sigchld_needed. Set CLOEXEC on the FDs so they are not leaked
into children.
Signed-off-by: Jason Andryuk <jandryuk@gmail.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Make the do_memory_op function accessible to tools linking with libxc.
Similar functions are already available for both domctl and sysctl. As part
of this patch we also change the input 'cmd' to be unsigned int to accurately
reflect what the hypervisor expects.
Signed-off-by: Tamas K Lengyel <tamas.lengyel@intel.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
libxl_domain_setmaxmem() called during "xl mem-max" should update the
domain's memory/static-max Xenstore node, as otherwise "xl mem-set"
won't be able to set the memory size to the new maximum.
Adjust the related comments and documentation accordingly.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Add monitor event that hooks the vmexit handler allowing for both sync and
async monitoring of events. With async monitoring an event is placed on the
monitor ring for each exit and the rest of the vmexit handler resumes normally.
If there are additional monitor events configured those will also place their
respective events on the monitor ring.
With the sync version an event is placed on the monitor ring but the handler
does not get resumed, thus the sync version is only useful when the VM is not
expected to resume normally after the vmexit. Our use-case is primarily with
the sync version with VM forks where the fork gets reset after sync vmexit
event, thus the rest of the vmexit handler can be safely skipped. This is
very useful when we want to avoid Xen crashing the VM under any circumstance,
for example during fuzzing. Collecting all vmexit information regardless of
the root cause makes it easier to reason about the state of the VM on the
monitor side, hence we opt to receive all events, even for external interrupt
and NMI exits and let the monitor agent decide how to proceed.
Signed-off-by: Tamas K Lengyel <tamas.lengyel@intel.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Need to separately specify if the reset is for the memory or for the VM state,
or both.
Signed-off-by: Tamas K Lengyel <tamas.lengyel@intel.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Expose the MCDT_NO CPUID flag to guests if available. The bit signals
that the CPU does not exhibit MCDT behavior, and as such can be
exposed without requiring any additional work.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
With the introduction of boot time cpupools, Xen can create many
different cpupools at boot time other than cpupool with id 0.
Since these newly created cpupools can't have an
entry in Xenstore, create the entry using xen-init-dom0
helper with the usual convention: Pool-<cpupool id>.
Given the change, remove the check for poolid == 0 from
libxl_cpupoolid_to_name(...).
Signed-off-by: Luca Fancellu <luca.fancellu@arm.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
The reference "to shadow the resident processes" is applicable to
domains (potentially) running in shadow mode only. Adjust the
calculations accordingly. This, however, requires further parameters.
Since the original function is deprecated anyway, and since it can't be
changed (for being part of a stable ABI), introduce a new (internal
only) function, with the deprecated one simply becoming a wrapper.
In dom0_paging_pages() also take the opportunity and stop open-coding
DIV_ROUND_UP().
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
PCI device assignment to an HVM with stubdom is potentially racy. First
the PCI device is assigned to the stubdom via the PV PCI protocol. Then
QEMU is sent a QMP command to attach the PCI device to QEMU running
within the stubdom. However, the sysfs entries within the stubdom may
not have appeared by the time QEMU receives the device_add command
resulting in errors like:
libxl_qmp.c:1838:qmp_ev_parse_error_messages:Domain 10:Could not open '/sys/bus/pci/devices/0000:00:1f.3/config': No such file or directory
This patch retries the device assignment up to 10 times with a 1 second
delay between. That roughly matches the overall hotplug timeout for
pci_add_timeout. pci_add_timeout's initialization is moved to
do_pci_add since retries call into pci_add_qmp_device_add again.
The qmp_ev_parse_error_messages error is still printed since it happens
at a lower level than the pci code controlling the retries. With that,
the "Retrying PCI add %d" message is also printed at ERROR level to
clarify what is happening.
Signed-off-by: Jason Andryuk <jandryuk@gmail.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Setting errno to a negative value makes no sense.
Fixes: e78e8b9bb6 ("libxl: Add interface for querying hypervisor about PCI topology")
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Setting errno to a negative error value makes no sense.
Fixes: cb99a64029 ("libxc: arm: allow passing a device tree blob to the guest")
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
The claimed reason for setting errno to -1 is wrong. On x86
xc_domain_pod_target() will set errno to a sane value in the error
case.
Fixes: ff1745d588 ("tools: libxl: do not set the PoD target on ARM")
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Setting errno to a negative value makes no sense.
Fixes: 6b6500b3cb ("tools/libs/evtchn: Add support for restricting a handle")
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
I've observed this failed assertion:
libxl_event.c:2057: libxl__ao_inprogress_gc: Assertion `ao' failed.
AFAICT, this is happening in qmp_proxy_spawn_outcome where
sdss->qmp_proxy_spawn.ao is NULL.
The out label of spawn_stub_launch_dm() calls qmp_proxy_spawn_outcome(),
but it is only in the success path that sdss->qmp_proxy_spawn.ao gets
set to the current ao.
qmp_proxy_spawn_outcome() should instead use sdss->dm.spawn.ao, which is
the already in-use ao when spawn_stub_launch_dm() is called. The same
is true for spawn_qmp_proxy().
With this, move sdss->qmp_proxy_spawn.ao initialization to
spawn_qmp_proxy() since its use is for libxl__spawn_spawn() and it can
be initialized along with the rest of sdss->qmp_proxy_spawn.
Fixes: 83c845033d ("libxl: use vchan for QMP access with Linux stubdomain")
Signed-off-by: Jason Andryuk <jandryuk@gmail.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
If domain_soft_reset_cb can't rename the save file, it doesn't call
initiate_domain_create() and calls domcreate_complete().
Skipping initiate_domain_create() means dcs->console_wait is
uninitialized and all 0s.
We have:
domcreate_complete()
libxl__xswait_stop()
libxl__ev_xswatch_deregister().
The uninitialized slotnum 0 is considered valid (-1 is the invalid
sentinel), so the NULL pointer path to passed to xs_unwatch() which
segfaults.
libxl__ev_xswatch_deregister:watch w=0x12bc250 wpath=(null) token=0/0: deregister slotnum=0
Move dcs->console_xswait initialization into the callers of
initiate_domain_create, do_domain_create() and do_domain_soft_reset(),
so it is initialized along with the other dcs state.
Fixes: c57e6ebd8c ("(lib)xl: soft reset support")
Signed-off-by: Jason Andryuk <jandryuk@gmail.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
libxl__stubdomain_is_linux can take a const pointer, so make the change.
This isn't an issue in-tree, but was found with an OpenXT patch where it
was called with only const libxl_domain_build_info available.
Signed-off-by: Jason Andryuk <jandryuk@gmail.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Use both ZLIB_CFLAGS and ZLIB_LIBS instead of cherry-picking flags
from a single "ZLIB" variable.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
CET Indirect Branch Tracking is a hardware feature designed to provide
forward-edge control flow integrity, protecting against jump/call oriented
programming.
IBT requires the placement of endbr{32,64} instructions at the target of every
indirect call/jmp, and every entrypoint.
However, the default -fcf-protection=branch places an endbr{32,64} on every
function which far more than necessary, and reduces the quantity of protection
afforded. Therefore, we use manual placement using the cf_check attribute.
It is necessary to check for both compiler and assembler support, as the
notrack prefix can be emitted in certain cases.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Prevent libxl from creating guests that attempts to use PoD together
with an IOMMU, even if no devices are actually assigned.
While the hypervisor could support using PoD together with an IOMMU as
long as no devices are assigned, such usage seems doubtful. There's no
guarantee the guest has PoD no longer be active, and thus a later
assignment of a PCI device to such domain could fail.
Preventing the usage of PoD together with an IOMMU at guest creation
avoids having to add checks for active PoD entries in the device
assignment paths.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
The Feb 2022 microcode from Intel retrofits AMD's MSR_SPEC_CTRL.PSFD interface
to Sunny Cove (IceLake) and later cores.
Update the MSR_SPEC_CTRL emulation, and expose it to guests.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Some libs' Makefile aren't loading the dependencies files *.d2.
We can load them from "libs.mk" as none of the Makefile here are
changing $(DEPS) or $(DEPS_INCLUDE) so it is fine to move the
"include" to "libs.mk".
As a little improvement, don't load the dependencies files (and thus
avoid regenerating the *.d2 files) during `make clean`.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Instead of including xen-external/bsd-sys-queue.h use the header
_xen_list.h in minios.c.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Remove generating _xentoolcore_list.h and use the common _xen_list.h
instead.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Remove generating _libxl_list.h and use the common _xen_list.h instead.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
It was Xen 4.14 where CPUID data was added to the migration stream, and 4.13
that we need to worry about with regards to compatibility. Xen 4.12 isn't
relevant.
Expand and correct the commentary.
Fixes: 111c8c33a8 ("x86/cpuid: do not expand max leaves on restore")
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
If we are in libxl_list_vcpu() and we are returning NULL, let's avoid
touching the output parameter *nr_vcpus_out, which the caller should
have initialized to 0.
The current behavior could be problematic if are creating a domain and,
in the meantime, an existing one is destroyed when we have already done
some steps of the loop. At which point, we'd return a NULL list of vcpus
but with something different than 0 as the number of vcpus in that list.
And this can cause troubles in the callers (e.g., nr_vcpus_on_nodes()),
when they do a libxl_vcpuinfo_list_free().
Crashes due to this are rare and difficult to reproduce, but have been
observed, with stack traces looking like this one:
#0 libxl_bitmap_dispose (map=map@entry=0x50) at libxl_utils.c:626
#1 0x00007fe72c993a32 in libxl_vcpuinfo_dispose (p=p@entry=0x38) at _libxl_types.c:692
#2 0x00007fe72c94e3c4 in libxl_vcpuinfo_list_free (list=0x0, nr=<optimized out>) at libxl_utils.c:1059
#3 0x00007fe72c9528bf in nr_vcpus_on_nodes (vcpus_on_node=0x7fe71000eb60, suitable_cpumap=0x7fe721df0d38, tinfo_elements=48, tinfo=0x7fe7101b3900, gc=0x7fe7101bbfa0) at libxl_numa.c:258
#4 libxl__get_numa_candidate (gc=gc@entry=0x7fe7100033a0, min_free_memkb=4233216, min_cpus=4, min_nodes=min_nodes@entry=0, max_nodes=max_nodes@entry=0, suitable_cpumap=suitable_cpumap@entry=0x7fe721df0d38, numa_cmpf=0x7fe72c940110 <numa_cmpf>, cndt_out=0x7fe721df0cf0, cndt_found=0x7fe721df0cb4) at libxl_numa.c:394
#5 0x00007fe72c94152b in numa_place_domain (d_config=0x7fe721df11b0, domid=975, gc=0x7fe7100033a0) at libxl_dom.c:209
#6 libxl__build_pre (gc=gc@entry=0x7fe7100033a0, domid=domid@entry=975, d_config=d_config@entry=0x7fe721df11b0, state=state@entry=0x7fe710077700) at libxl_dom.c:436
#7 0x00007fe72c92c4a5 in libxl__domain_build (gc=0x7fe7100033a0, d_config=d_config@entry=0x7fe721df11b0, domid=975, state=0x7fe710077700) at libxl_create.c:444
#8 0x00007fe72c92de8b in domcreate_bootloader_done (egc=0x7fe721df0f60, bl=0x7fe7100778c0, rc=<optimized out>) at libxl_create.c:1222
#9 0x00007fe72c980425 in libxl__bootloader_run (egc=egc@entry=0x7fe721df0f60, bl=bl@entry=0x7fe7100778c0) at libxl_bootloader.c:403
#10 0x00007fe72c92f281 in initiate_domain_create (egc=egc@entry=0x7fe721df0f60, dcs=dcs@entry=0x7fe7100771b0) at libxl_create.c:1159
#11 0x00007fe72c92f456 in do_domain_create (ctx=ctx@entry=0x7fe71001c840, d_config=d_config@entry=0x7fe721df11b0, domid=domid@entry=0x7fe721df10a8, restore_fd=restore_fd@entry=-1, send_back_fd=send_back_fd@entry=-1, params=params@entry=0x0, ao_how=0x0, aop_console_how=0x7fe721df10f0) at libxl_create.c:1856
#12 0x00007fe72c92f776 in libxl_domain_create_new (ctx=0x7fe71001c840, d_config=d_config@entry=0x7fe721df11b0, domid=domid@entry=0x7fe721df10a8, ao_how=ao_how@entry=0x0, aop_console_how=aop_console_how@entry=0x7fe721df10f0) at libxl_create.c:2075
Signed-off-by: Dario Faggioli <dfaggioli@suse.com>
Tested-by: James Fehlig <jfehlig@suse.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
By writing an empty "hotplug-status" xenstore node in the backend path
libxl can force Linux netback to wait for hotplug script execution
before proceeding to the 'connected' state.
This is required so that netback doesn't skip state 2 (InitWait) and
thus blocks libxl waiting for such state in order to launch the
hotplug script (see libxl__wait_device_connection).
Reported-by: James Dingwall <james-xen@dingwall.me.uk>
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Tested-by: James Dingwall <james-xen@dingwall.me.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
Tested-by: Julien Grall <jgrall@amazon.com>
Reviewed-by: Wei Liu <wei.liu@kernel.org>
Do this before adding any more stuff to xg_cpuid_x86.c.
The placement in xenctrl.h is wrong, as they are implemented by the
xenguest library. Note that xg_cpuid_x86.c needs to include
xg_private.h, and in turn also fix xg_private.h to include
xc_bitops.h. The bitops definition of BITS_PER_LONG needs to be
changed to not be an expression, so that xxhash.h can use it in a
preprocessor if directive.
As a result also modify xen-cpuid to include xenguest.h.
Reported-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
It is possible now to delete minios_evtchn_close_fd() and the extern
declaration of event_queue.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
libgnttab is using implementation details of Mini-OS. Change that by
letting libgnttab use the new alloc_file_type() and get_file_from_fd()
functions and the generic dev pointer of struct file from Mini-OS.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Mini-OS and libevtchn are using implementation details of each other.
Change that by letting libevtchn use the new alloc_file_type() and
get_file_from_fd() function and the generic dev pointer of struct file
from Mini-OS.
By using private struct declarations Mini-OS will be able to drop the
libevtchn specific definitions of struct evtchn_port_info and
evtchn_port_list in future. While at it use bool for "pending" and
"bound".
Switch to use xce as function parameter instead of fd where possible.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Andrew Cooper
Anthony PERARD
Jane Malalane
Roger Pau Monne
Luca Fancellu
Jason Andryuk
Tamas K Lengyel
Juergen Gross
Jan Beulich
Dario Faggioli