xc_unmap_domain_meminfo uses P2M_FLL_ENTRIES macro instead of P2M_FL_ENTRIES.
Moreover, P2M_FL_ENTRIES macro uses (dinfo->p2m_size) which is always 0 here
as we don't initialize it. The result is that we always unmap just 1 frame.
xc_map_domain_meminfo uses P2M_FLL_ENTRIES macro instead of P2M_FL_ENTRIES
on failure path.
The issue went unnoticed mostly because we use unmap_domain_meminfo and
xc_map_domain_meminfo in one-shot xen-mfndump and xen-hptool (through
xc_exchange_page()) tools. When used is long-running apps (e.g. in xl)
domains become zombies after their death.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Disk replication is enabled by default. This patch adds a cmdline
switch to 'xl remus' command to explicitly disable disk replication.
A new boolean field 'diskbuf' is added to the libxl_domain_remus_info
structure to represent this configuration option inside libxl.
Note: Disabling disk replication requires enabling unsafe mode.
Signed-off-by: Yang Hongyang <yanghy@cn.fujitsu.com>
Signed-off-by: Shriram Rajagopalan <rshriram@cs.ubc.ca>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Add two members in libxl_domain_remus_info:
netbuf: whether netbuf is enabled
netbufscript: the path of the script which will be run to setup
and tear down the guest's interface.
Add cmdline switches to 'xl remus' command to enable or disable
network buffering and a domain-specific hotplug script to setup
network buffering.
Add a new config var 'remus.default.netbufscript' to xl.conf, that
allows the user to override the default global script used to
setup network buffering.
Note: Network buffering is enabled by default. Disabling network
buffering requires enabling unsafe mode.
Signed-off-by: Shriram Rajagopalan <rshriram@cs.ubc.ca>
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Reviewed-by: Wen Congyang <wency@cn.fujitsu.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
By default, network buffering and disk replication are enabled;
checkpoints are replicated to another standby VM.
This patch allows the user to disable any of these features by
explicitly specifying a 'run in unsafe mode' switch when invoking
the 'xl remus' command. While running Remus in an unsafe mode
makes little sense under normal circumstances, it is useful to be
able to disable one or more features mentioned above for
testing/debugging/profiling purposes.
Unless this option is enabled, it will not be possible to
replicate memory checkpoints to /dev/null (blackhole replication),
disable network buffering or disk replication.
As a starter, the use of blackhole replication now requires that
the unsafe mode be enabled. Subsequent patches will add support
for disabling network buffering and disk replication in a similar
manner.
Signed-off-by: Yang Hongyang <yanghy@cn.fujitsu.com>
Signed-off-by: Shriram Rajagopalan <rshriram@cs.ubc.ca>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
This patch adds the machinery required for protecting a guest's
disk state, when the guest disk uses a DRBD disk backend.
This patch comprises of two parts:
1. Hotplug scripts: The block-drbd-probe script is responsible for
performing sanity checks on the state of the DRBD disk before the
checkpointing process begins. This script should be invoked by
libxl for each of the guest's disk devices, when starting Remus.
2. Remus drbd disk device: Implements the interfaces required by the
remus abstract device layer. A note about the implementation:
a) setup() is called for each disk attached to the guest.
During setup():
i) The hotplug script is called to perform the sanity check.
ii) Libxl obtains a handle to the DRBD device (/dev/drbd*) and
and subsequently controls disk checkpoint replication using
this handle in the checkpoint callbacks.
c) The preresume() checkpoint callback is executed asynchronously
using libxl__ev_child_fork(), as it may potentially block for more
than few seconds in case of backup failure.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Yang Hongyang <yanghy@cn.fujitsu.com>
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Signed-off-by: Shriram Rajagopalan <rshriram@cs.ubc.ca>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
This patch adds the machinery required for protecting a guest's
network device state. This patch comprises of two parts:
1. Hotplug scripts: The remus-netbuf-setup script is responsible for
setting up and tearing down the necessary infrastructure required for
network output buffering. This script should be invoked by libxl for
each of the guest's network interfaces, when starting or stopping Remus.
Apart from returning success/failure indication via the usual hotplug
entries in xenstore, this script also writes to xenstore, the name of
the REMUS_IFB device to be used to control the vif's network output.
The script relies on libnl3 command line utilities to perform various
setup/teardown functions. The script is confined to Linux platforms only
since NetBSD does not seem to have libnl3.
2. Remus network device: Implements the interfaces required by the
remus abstract device layer. A note about the implementation:
a) init_subkind_nic() & cleanup_subkind_nic() are called once per Remus
invocation. They establish and free netlink related state respectively.
b) setup() and teardown are called for each vif attached to the
guest.
During setup():
i) The hotplug script is called to setup a network buffer on a
given vif. The script chooses an available IFB device from
the system, redirects vif egress traffic to the IFB device
and sets up the plug qdisc (output buffer) on the IFB device.
The name of the IFB device is communicated via xenstore to
libxl.
ii) Libxl obtains a handle to the plug qdisc using the libnl3 API
and subsequently controls output buffering using this handle
in the checkpoint callbacks.
During teardown(), the hotplug scripts are called again to remove
the vif->ifb traffic redirection, release the ifb and the plug
qdisc associated with it.
c) The checkpoint callbacks [postsuspend(), preresume() and commit()]
are implemented as synchronous ops as the netlink calls associated
with the qdisc subsystem are very fast.
Signed-off-by: Shriram Rajagopalan <rshriram@cs.ubc.ca>
Signed-off-by: Yang Hongyang <yanghy@cn.fujitsu.com>
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Introduce an abstract device layer that allows the Remus
logic in libxl to control a guest's devices in a device-agnostic
manner. The device layer also exposes a set of internal interfaces
that a device type must implement, if it wishes to support Remus.
The following API are exposed to libxl:
One-time configuration operations:
*libxl__remus_devices_setup
> Enable output buffering for NICs, setup disk replication, etc.
*libxl__remus_devices_teardown
> Disable network output buffering and disk replication;
teardown any associated external setups like qdiscs for NICs.
Operations executed every checkpoint (in order of invocation):
*libxl__remus_devices_postsuspend
*libxl__remus_devices_preresume
*libxl__remus_devices_commit
Each device type needs to implement the interfaces specified in
the libxl__remus_device_instance_ops if it wishes to support Remus.
The high-level control flow through the Remus device layer is shown below:
xl remus
|-> libxl_domain_remus_start
|-> libxl__remus_devices_setup
|-> Per-checkpoint libxl__remus_devices_[postsuspend,preresume,commit]
...
|-> On backup failure/network error/other errors
libxl__remus_devices_teardown
callback processing
* Only call the per-device libxl__multidev_one_callback
when the iteration has succeded or failed.
* The final callback (called by multidev) is a trivial
shim to shuffle the pointers and notify our own caller.
Signed-off-by: Yang Hongyang <yanghy@cn.fujitsu.com>
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Shriram Rajagopalan <rshriram@cs.ubc.ca>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Libnl3 is required for controlling Remus network buffering.
This patch adds dependency on libnl3 (>= 3.2.8) to autoconf scripts.
It also provides the ability to configure tools without libnl3 support
i.e., without network buffering support.
When there is no network buffering support, libxl__netbuffer_enabled()
returns 0, otherwise returns 1. The callers of this api will be
introduced in the rest of the series.
NOTE: This patch changes tools/configure.ac, please rerun
autogen.sh while applying the patch.
Signed-off-by: Shriram Rajagopalan <rshriram@cs.ubc.ca>
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Yang Hongyang <yanghy@cn.fujitsu.com>
Reviewed-by: Wen Congyang <wency@cn.fujitsu.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
This can be used to fork children to allow the asynchronous execution
of system calls which only come in a synchronous variant. This will
be useful for Remus, in the following patches.
Signed-off-by: Yang Hongyang <yanghy@cn.fujitsu.com>
Signed-off-by: Shriram Rajagopalan <rshriram@cs.ubc.ca>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
libxl__multidev_prepare_with_aodev is similar to libxl__multidev_prepare,
but takes a libxl__ao_device as an extra argument.
libxl__multidev_prepare is now a wrapper around
libxl__multidev_prepare_with_aodev.
This new internal API will be used by the Remus device abstract layer
for handling various Remus devices.
Signed-off-by: Yang Hongyang <yanghy@cn.fujitsu.com>
Signed-off-by: Shriram Rajagopalan <rshriram@cs.ubc.ca>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Now a caller who wants to be able to do other work when the aodev
completes can put their own callback into the aodev, and make the
multidev machinery aware that the particular aodev is complete (from
the point of view that multidev should have) whenever it likes.
No functional change in this patch.
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
libxl.h includes _libxl_list.h, but the Makefile does not reflect this
dependency. This can lead to build error due to a missing _libxl_list.h
file.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
XEN_DOMCTL_cacheflush hypercalls are (and will always be) -ENOSYS on x86, but
xc_domain_cacheflush() is called often during domain build and migrate for
correct behaviour on ARM.
Stub xc_domain_cacheflush() out on x86 to remove its pressure on the global
domctl lock, and the hypercall overhead (which applies further pressure to the
already heavily-contended TLB flush lock).
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
CC: Keir Fraser <keir@xen.org>
CC: Jan Beulich <JBeulich@suse.com>
CC: Tim Deegan <tim@xen.org>
CC: Ian Campbell <Ian.Campbell@citrix.com>
CC: Ian Jackson <Ian.Jackson@eu.citrix.com>
CC: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
At the moment, making a release tarball is an annoyingly manual
process that involves running "git archive" into a temporary directory.
Script this process up and make a target, so that the release manager
can simply type "make src-tarball-release" and have everything show up
nice and neat in dist/xen-$version.tar.gz. "make src-tarball" will
make a version number based on git describe, which will typically have
the most recent tag, number of commits since that tag, and the git
commit id of the current HEAD.
Signed-off-by: George Dunlap <george.dunlap@eu.citrix.com>
subtree-force-update will update all subtrees according to the current TAG specified
in Config.mk.
Signed-off-by: George Dunlap <george.dunlap@eu.citrix.com>
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
This patch optionally re-instates support for the partition time reference
counter that was previously introduced by commit
e36cd2cdc9 and reverted by commit
1cd4fab14c. The previous implementation was
non-optional and flawed.
This implementation uses the tsc of vcpu0, which is preserved across
save/restore as part of the architectural state, and then converts that
to a 100ns tick using the domain's tsc_khz.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Cc: Keir Fraser <keir@xen.org>
Acked-by: Jan Beulich <jbeulich@suse.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Cc: Christoph Egger <chegger@amazon.de>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
The following commits introduced the time reference counter MSR and
TSC/APIC frequency MSRs into the viridian feature set respectively:
e36cd2cdc984657efd91
The time reference counter MSR feature was then reverted by commit
1cd4fab14c
because a flaw in the implementation meant the counter was reset on
migration.
All of these changes were made without any addtional options being
added to the VM configuration, or any compatibility checks being made
in the domain save/restore code. Hence setting the single boolean
'viridian' option in the VM configuration yields a different set of
features depending on which version of Xen the VM is started on, and the
feature set can change across migration (so new MSRs can magically appear).
This patch grandfathers in the current viridian features set and calls them
the 'base' and 'freq' feature sets. HVM_PARAM_VIRIDIAN is re-purposed as
a feature mask. The hypervisor has only ever allowed it ot be set to 0
or 1, so the presence of the base and freq sets are indicated by setting
bit 0. The freq set can then be turned off by setting bit 1, thus
restoring the pre-Xen-4.4 base set. Newly implemented viridian features
can be optionally enabled in future by setting further bits.
The viridian option in xl.cfg(5) has also been changed to a list so
that the sets can be individually enabled or disabled. For compatibility,
if the option is specified as a boolean, then a true (1) value will enable
the base and freq sets and a false (0) value will not enable any
enlightenments.
This patch also alters the allowed write accesses to HVM_PARAM_VIRIDIAN.
Currently there is nothing to stop the guest writing this value (which,
while harmless to anything else, should not happen) and nothing to
stop a toolstack from setting the value back to zero whilst the guest is
running, causing CPUID leaves to disappear and MSR accesses to start
causing GPFs in the guest. Both of these possibilities are now disallowed:
Once the parameter is set to a non-zero value it may not be modified (only
re-written with the same value), and guests no longer have any write
access.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Cc: Keir Fraser <keir@xen.org>
Acked-by: Jan Beulich <jbeulich@suse.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Cc: David Scott <dave.scott@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Add xc_sched_rtds_* functions to interact with Xen to set/get domain's
parameters for rtds scheduler.
Note: VCPU's information (period, budget) is in microsecond (us).
Signed-off-by: Meng Xu <mengxu@cis.upenn.edu>
Signed-off-by: Sisu Xi <xisisu@gmail.com>
Reviewed-by: Dario Faggioli <dario.faggioli@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: George Dunlap <george.dunlap@eu.citrix.com>
[ ijc -- xenctrl.h has moved to tools/libxc/include, adjust patch to match ]
Build qemu-xen on ARM and ARM64: it is used to provide the PV backends,
disk and framebuffer in particular.
Ideally we would also modify the configure options to only build what is
necessary: a machine just for PV backends. However that is a work in
progress and not yet available in QEMU (see
http://marc.info/?l=qemu-devel&m=139082425718379&w=2). So we just build
the usual i386 target, even though no i386 emulation is going to be done
by qemu-xen on ARM.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Also moves xc_dom.h to include as it is used often by other xen tools.
Use the new include subdirectories to build Xen tools, qemu-xen and
stubdoms.
Add the old libxc include path to the programs that need it to build,
on a case by case basis and commeting that they shouldn't require
internal libxc headers to build.
[ And: update QEMU_TRADITIONAL_REVISION to corresponding qemu patch
- Ian jackson ]
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
In preparation to remove hardcoded /var/run/xen paths, provide
XEN_RUN_DIR and related directories to xc_private.h. Similar code exists
already for libxl, stubdom and other parts.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Replace usage of buildmakevars2file with buildmakevars2header. The macro
generates a C header file, so remove code which converts shell variables
into C defines. Also update the dependency, the macro itself creates a
dependency for _paths.h. A temporary file is not needed anymore.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
genpath is a detail of buildmakevars2file. Replace the dependency to
genpath with the actual buildmakevars2file target. This change by
itself does not fix any bug. Upcoming changes will add dependencies to
$(target), but no rule exist to create $(target).
To force a rebuild of the $(1) rule the target now depends on the
existing .phony target. This dummy target is already used elsewhere in
the code.
No change in behaviour is expected by this patch.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
install-hotplug and install-udev are obsolete since commit 57bcfa11
("tools/hotplug: Separate OS-specific scripts.")
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Create XEN_LOCK_DIR because it is a compiletime setting. Also /var/lock
might be empty on startup because it is a tmpfs mount point.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Create XEN_RUN_DIR instead of hardcoded path because it is a compiletime
setting. Also /var/run might be empty on startup because it is a tmpfs
mount point.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Move location of temporary bootfiles from /var/run/xend/boot to
/var/run/xen/pygrub. Create the subdirectory if does not exist.
The <dir> argument --output-directory must be an existing directory.
The reason for this change is that all entrys below /var/run have to be
created at runtime in case /var/run is cleared on every boot.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
The directory tools/python/xen/util does not exist.
Upcoming changes to genpath will fail if the rule persists.
Nothing uses path.py (anymore?), so get rid it.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
[ ijc -- removed from .gitignore too ]
Even if xen is configured and compiled with different --prefix= so that
it operates entirely below $prefix, the resulting package from 'make
rpmball' is always called "xen.rpm".
Use an environment name to give a different name.
This can be used like this:
suffix=-bugN
prefix=/opx/xen/staging${suffix}
./configure --prefix=${prefix}
make rpmball PKG_SUFFIX=${suffix}
The result will be "xen-bugN.rpm" instead of "xen.rpm". The benefit is that
many xen${suffix}.rpm packages can be installed at the same time.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
In verify mode, we map the guest memory, and the guest page is
region_base + i * PAGE_SIZE. So we should csum page (region_base
+ i * PAGE_SIZE), not (region_base + (i+curbatch) * PAGE_SIZE)
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
apply_batch() only handles MAX_BATCH_SIZE pages at one time. If
there is some bogus/unmapped/allocate-only/broken page, we will
skip it. So when we call apply_batch() again, the first page's
index is curbatch - invalid_pages. invalid_pages stores the number
of bogus/unmapped/allocate-only/broken pages we have found.
In many cases, invalid_pages is 0, so we don't catch this error.
Signed-off-by: Hong Tao <bobby.hong@huawei.com>
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Vitaly Kuznetsov
Roger Pau Monne
Andrew Cooper
Wei Liu
Yang Hongyang
Ian Jackson
Anthony PERARD
Stefano Stabellini
George Dunlap
Paul Durrant
Meng Xu
Ian Campbell
Olaf Hering
Wen Congyang
Hong Tao