TSXLDTRK lives in CPUID leaf 7[0].edx, not 7[0].ecx.
Bit 16 in ecx is LA57.
Fixes: a6d1b55847 ("x86emul: support X{SUS,RES}LDTRK")
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
The array of IDs is an output.
Fixes: 79647c5bc9 ("libxc: convert domctl interfaces over to hypercall buffers")
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
PKG_CONFIG_REMOVE doesn't do anything anymore. Commit dd33fd2e81
(tools: split libxenstore into new tools/libs/store directory) had
reintroduced it without saying why.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Those CFLAGS_* are already added in libs.mk via USELIBS_stat.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
This var was originally $(CFLAGS_$*.o), and probably was copied from
the generic %.o:%.c rules.
Nothing sets CFLAGS_libxl.o, so remove it.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
libxenutil doesn't include _paths.h so no need to generate it.
libxenctrl doesn't use macros from _paths.h so can be removed.
Fix libxenguest to include _paths.h properly instead of relying on
xc_private.h
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
The size of the video memory of PVH guests should be set to 0 in case
no value has been specified.
Doing not so will leave it to be -1, resulting in an additional 1 kB
of RAM being advertised in the memory map (here the output of a PVH
Mini-OS boot with 16 MB of RAM assigned):
Memory map:
000000000000-0000010003ff: RAM
0000feff8000-0000feffffff: Reserved
0000fc008000-0000fc00803f: ACPI
0000fc000000-0000fc000fff: ACPI
0000fc001000-0000fc007fff: ACPI
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
All *PRINTF() and *ERROR() macros are based on xc_reportv() which is
saving and restoring errno in order to not modify it. There is no need
to save and restore in those macros, too.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
The HVM parameters for pre-allocated event channels should be set in
libxenguest, like it is done for PV guests, and the ring pages that
libxenguest allocates.
Suggested-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
OSSTest has identified a 3rd regression caused by this change. Migration
between Xen 4.15 and 4.16 on the nocera pair of machines (AMD Opteron 4133)
fails with:
xc: error: Failed to set CPUID policy: leaf 00000000, subleaf ffffffff, msr ffffffff (22 = Invalid argument): Internal error
xc: error: Restore failed (22 = Invalid argument): Internal error
which is a safety check to prevent resuming the guest when the CPUID data has
been truncated. The problem is caused by shrinking of the max policies, which
is an ABI that needs handling compatibly between different versions of Xen.
Furthermore, shrinking of the default policies also breaks things in some
cases, because certain cpuid= settings in a VM config file which used to work
will now be refused. Also external toolstacks that attempt to set the CPUID
policy from a featureset might now see some filled leaves not reachable due to
the shrinking done to the default domain policy before applying the
featureset.
This reverts commit 540d911c28, as well as the
partial fix attempt in 81da2b544c (which added
one new case where cpuid= settings might not apply correctly) and restores the
same behaviour as Xen 4.15.
Fixes: 540d911c28 ("x86/CPUID: shrink max_{,sub}leaf fields according to actual leaf contents")
Fixes: 81da2b544c ("x86/cpuid: prevent shrinking migrated policies max leaves")
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Such macro just clamps the passed version to fit in the designated
bits of the domctl field. The main purpose is to make it clearer in
the code when max grant version is being set in the grant_opts field.
Existing users that where setting the version in the grant_opts field
are switched to use the macro.
No functional change intended.
Requested-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Bertrand Marquis <bertrand.marquis@arm.com>
Acked-by: Julien Grall <jgrall@amazon.com>
Reviewed-by: Ian Jackson <iwj@xenproject.org>
Release-Acked-by: Ian Jackson <iwj@xenproject.org>
CPUID policies from guest being migrated shouldn't have the maximum
leaves shrink, as that would be a guest visible change. The hypervisor
has no knowledge on whether a guest has been migrated or is build from
scratch, and hence it must not blindly shrink the CPUID policy in
recalculate_cpuid_policy. Remove the
x86_cpuid_policy_shrink_max_leaves call from recalculate_cpuid_policy.
Removing such call could be seen as a partial revert of 540d911c28.
Instead let the toolstack shrink the policies for newly created
guests, while keeping the previous values for guests that are migrated
in. Note that guests migrated in without a CPUID policy won't get any
kind of shrinking applied.
Fixes: 540d911c28 ('x86/CPUID: shrink max_{,sub}leaf fields according to actual leaf contents')
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Release-Acked-by: Ian Jackson <iwj@xenproject.org>
Introduce a new domain create field so that toolstack can specify the
maximum grant table version usable by the domain. This is plumbed into
xl and settable by the user as max_grant_version.
Previously this was only settable on a per host basis using the
gnttab command line option.
Note the version is specified using 4 bits, which leaves room to
specify up to grant table version 15. Given that we only have 2 grant
table versions right now, and a new version is unlikely in the near
future using 4 bits seems more than enough.
xenstored stubdomains are limited to grant table v1 because the
current MiniOS code used to build them only has support for grants v1.
There are existing limits set for xenstored stubdomains at creation
time that already match the defaults in MiniOS.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Christian Lindig <christian.lindig@citrix.com>
Reviewed-by: Ian Jackson <iwj@xenproject.org>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Release-Acked-by: Ian Jackson <iwj@xenproject.org>
In order to let the toolstack be able to set the gnttab version on a
per-domain basis, it needs to know which ABIs Xen supports. Introduce
XEN_SYSCTL_PHYSCAP_gnttab_v{1,2} for the purpose, and plumb in down into
userspace.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Christian Lindig <christian.lindig@citrix.com>
Reviewed-by: Ian Jackson <iwj@xenproject.org>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Releae-Acked-by: Ian Jackson <iwj@xenproject.org>
libxl will create an emulated PCI device tree node in the device tree to
enable the guest OS to discover the virtual PCI during guest boot.
Emulated PCI device tree node will only be created when there is any
device assigned to guest.
A new area has been reserved in the arm guest physical map at
which the VPCI bus is declared in the device tree (reg and ranges
parameters of the node).
Note that currently we are using num_pcidevs instead of
c_info->passthrough to decide whether to create a vPCI DT node.
This will be insufficient if and when ARM does PCI hotplug.
Add this note inside libxl_create.c where c_info->passthrough
is set.
Signed-off-by: Rahul Singh <rahul.singh@arm.com>
Signed-off-by: Michal Orzel <michal.orzel@arm.com>
Signed-off-by: Bertrand Marquis <bertrand.marquis@arm.com>
Reviewed-by: Julien Grall <jgrall@amazon.com>
Acked-by: Ian Jackson <iwj@xenproject.org>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
... to take a second argument of type libxl_domain_config*
rather than libxl_domain_build_info*.
This change will be needed to get access from
libxl__prepare_dtb to "num_pcidevs" field of
libxl_domain_config to check whether to create
a vPCI DT node or not.
Signed-off-by: Michal Orzel <michal.orzel@arm.com>
Signed-off-by: Bertrand Marquis <bertrand.marquis@arm.com>
Suggested-by: Ian Jackson <iwj@xenproject.org>
Reviewed-by: Ian Jackson <iwj@xenproject.org>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
... to take a second argument of type libxl_domain_config*
rather than libxl_domain_build_info*.
We need to pass the whole libxl_domain_config
structure as this will be needed later on to modify
the libxl__prepare_dtb function to also take
libxl_domain_config.
Signed-off-by: Michal Orzel <michal.orzel@arm.com>
Signed-off-by: Bertrand Marquis <bertrand.marquis@arm.com>
Suggested-by: Ian Jackson <iwj@xenproject.org>
Reviewed-by: Ian Jackson <iwj@xenproject.org>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
The extended region (safe range) is a region of guest physical
address space which is unused and could be safely used to create
grant/foreign mappings instead of wasting real RAM pages from
the domain memory for establishing these mappings.
The extended regions are chosen at the domain creation time and
advertised to it via "reg" property under hypervisor node in
the guest device-tree. As region 0 is reserved for grant table
space (always present), the indexes for extended regions are 1...N.
If extended regions could not be allocated for some reason,
Xen doesn't fail and behaves as usual, so only inserts region 0.
Please note the following limitations:
- The extended region feature is only supported for 64-bit domain
currently.
- The ACPI case is not covered.
***
The algorithm to choose extended regions for non-direct mapped
DomU is simpler in comparison with the algorithm for direct mapped
Dom0. We usually have a lot of unused space above 4GB, and might
have some unused space below 4GB (depends on guest memory size).
Try to allocate separate 2MB-aligned extended regions from the first
(below 4GB) and second (above 4GB) RAM banks taking into the account
the maximum supported guest physical address space size and the amount
of memory assigned to the guest. The minimum size of extended region
the same as for Dom0 (64MB).
Please note, we introduce fdt_property_reg_placeholder helper which
purpose is to create N ranges that are zeroed. The interesting fact
is that libfdt already has fdt_property_placeholder(). But this was
introduced only in 2017, so there is a risk that some distros may not
ship the last libfdt version. This is why we implement our own light
variant for now.
Suggested-by: Julien Grall <jgrall@amazon.com>
Signed-off-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Reviewed-by: Julien Grall <jgrall@amazon.com>
Acked-by: Ian Jackson <iwj@xenproject.org>
We need to pass info about maximum supported guest physical
address space size to the toolstack on Arm in order to properly
calculate the base and size of the extended region (safe range)
for the guest. The extended region is unused address space which
could be safely used by domain for foreign/grant mappings on Arm.
The extended region itself will be handled by the subsequent
patch.
Currently the same guest physical address space size is used
for all guests (p2m_ipa_bits variable on Arm, the x86 equivalent
is hap_paddr_bits).
Add an explicit padding after "gpaddr_bits" field and also
(while at it) after "domain" field.
Also make sure that full structure is cleared in all cases by
moving the clearing into getdomaininfo(). Currently it is only
cleared by the sysctl caller (and only once).
Please note, we do not need to bump XEN_DOMCTL_INTERFACE_VERSION
as a bump has already occurred in this release cycle. But we do
need to bump XEN_SYSCTL_INTERFACE_VERSION as the structure is
re-used in a sysctl.
Suggested-by: Julien Grall <jgrall@amazon.com>
Signed-off-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Reviewed-by: Ian Jackson <iwj@xenproject.org>
[hypervisor parts]
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Add parameter vpmu to xl domain configuration syntax
to enable the access to PMU registers by disabling
the PMU traps(currently only for ARM).
The current status is that the PMU registers are not
virtualized and the physical registers are directly
accessible when this parameter is enabled. There is no
interrupt support and Xen will not save/restore the
register values on context switches.
According to Arm Arm, section D7.1:
"The Performance Monitors Extension is common
to AArch64 operation and AArch32 operation."
That means we have an ensurance that if PMU is
present in one exception state, it must also be
present in the other.
Please note that this feature is experimental.
Signed-off-by: Michal Orzel <michal.orzel@arm.com>
Signed-off-by: Julien Grall <julien@xen.org>
Reviewed-by: Bertrand Marquis <bertrand.marquis@arm.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Ian Jackson <iwj@xenproject.org>
Introduce flag XEN_SYSCTL_PHYSCAP_vpmu which
indicates whether the platform supports vPMU
functionality. Modify Xen and tools accordingly.
Take the opportunity and fix XEN_SYSCTL_PHYSCAP_vmtrace
definition in sysctl.h which wrongly use (1 << 6)
instead of (1u << 6).
Signed-off-by: Michal Orzel <michal.orzel@arm.com>
Reviewed-by: Bertrand Marquis <bertrand.marquis@arm.com>
Acked-by: Nick Rosbrook <rosbrookn@ainfosec.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Acked-by: Ian Jackson <iwj@xenproject.org>
Acked-by: Christian Lindig <christian.lindig@citrix.com>
Arm's PCI passthrough implementation doesn't support legacy interrupts,
but MSI/MSI-X. This can be the case for other platforms too.
For that reason introduce a new CONFIG_PCI_SUPP_LEGACY_IRQ and add
it to the CFLAGS and compile the relevant code in the toolstack only if
applicable.
Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
[stefano: minor change to Makefile]
Signed-off-by: Stefano Stabellini <stefano.stabellini@xilinx.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Reviewed-by: Rahul Singh <rahul.singh@arm.com>
Tested-by: Rahul Singh <rahul.singh@arm.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
In case abi-dumper is available the stubdom builds will fail due to a
false dependency on dynamic loadable libraries. Fix that.
Fixes: d7c9f7a7a3 ("tools/libs: Write out an ABI analysis when abi-dumper is available")
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
The memory allocator currently calculates alignment in libxl's virtual
address space, rather than guest physical address space. This results
in the FACS being commonly misaligned.
Furthermore, the allocator has several other bugs.
The opencoded align-up calculation is currently susceptible to a bug
that occurs in the corner case that the buffer is already aligned to
begin with. In that case, an align-sized memory hole is introduced.
The while loop is dead logic because its effects are entirely and
unconditionally overwritten immediately after it.
Rework the memory allocator to align in guest physical address space
instead of libxl's virtual memory and improve the calculation, drop
errant extra page in allocated buffer for ACPI tables, and give some
of the variables better names/types.
Fixes: 14c0d328da ("libxl/acpi: Build ACPI tables for HVMlite guests")
Signed-off-by: Kevin Stefanov <kevin.stefanov@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Ian Jackson <iwj@xenproject.org>
There is a step change in speculation protections between the Zen1 and Zen2
microarchitectures.
Zen1 and older have no special support. Control bits in non-architectural
MSRs are used to make lfence be dispatch-serialising (Spectre v1), and to
disable Memory Disambiguation (Speculative Store Bypass). IBPB was
retrofitted in a microcode update, and software methods are required for
Spectre v2 protections.
Because the bit controlling Memory Disambiguation is model specific,
hypervisors are expected to expose a MSR_VIRT_SPEC_CTRL interface which
abstracts the model specific details.
Zen2 and later implement the MSR_SPEC_CTRL interface in hardware, and
virtualise the interface for HVM guests to use. A number of hint bits are
specified too to help guide OS software to the most efficient mitigation
strategy.
Zen3 introduced a new feature, Predictive Store Forwarding, along with a
control to disable it in sensitive code.
Add CPUID and VMCB details for all the new functionality.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
AMD Zen3 adds the NullSelectorClearsBase bit to indicate that loading
a NULL segment selector zeroes the base and limit fields, as well as
just attributes.
Expose bit to all guests.
Suggested-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Jane Malalane <jane.malalane@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
For one xc_private.h needlessly repeats xen-tools/libs.h's definition.
And then there are two suspicious uses (resulting from the inconsistency
with the respective 2nd parameter of DIV_ROUNDUP()): While the one in
tools/console/daemon/io.c - as per the code comment - intentionally uses
8 as the second argument (meaning to align to a multiple of 256), the
one in alloc_magic_pages_hvm() pretty certainly does not: There the goal
is to align to a uint64_t boundary, for the following module struct to
end up aligned.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Acked-by: Ian Jackson <iwj@xenproject.org>
For log-dirty operations a 64-bit field is being truncated to become an
"int" return value. Seeing the large number of arguments the present
function takes, reduce its set of parameters to that needed for all
operations not involving the log-dirty bitmap, while introducing a new
wrapper for the log-dirty bitmap operations. This new function in turn
doesn't need an "mb" parameter, but has a 64-bit return type. (Using the
return value in favor of a pointer-type parameter is left as is, to
disturb callers as little as possible.)
While altering xc_shadow_control() anyway, also adjust the types of the
last two of the remaining parameters.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Christian Lindig <christian.lindig@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Acked-by: Ian Jackson <iwj@xenproject.org>
Don't assume tv_sec is a unsigned long, it is 64 bits on NetBSD 32 bits.
Use %jd and cast to (intmax_t) instead
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Acked-by: Ian Jackson <iwj@xenproject.org>
We unconditionally set HTT, so merely doubling the value read from
hardware isn't going to be correct if that value is zero.
Reported-by: Julien Grall <julien@xen.org>
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Tested-by: Julien Grall <julien@xen.org>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Xen may not support 32-bit PV guest for a number of reasons (lack of
CONFIG_PV32, explicit pv=no-32 command line argument, or implicitly
due to CET being enabled) and advertises this to the toolstack via the
absence of xen-3.0-x86_32p ABI.
Currently, when trying to boot a 32-bit PV guest, the ABI check is too
late and the build explodes in the following manner yielding an
unhelpful error message:
xc: error: panic: xg_dom_boot.c:121: xc_dom_boot_mem_init: can't allocate low memory for domain: Out of memory
libxl: error: libxl_dom.c:586:libxl__build_dom: xc_dom_boot_mem_init failed: Operation not supported
libxl: error: libxl_create.c:1573:domcreate_rebuild_done: Domain 1:cannot (re-)build domain: -3
libxl: error: libxl_domain.c:1182:libxl__destroy_domid: Domain 1:Non-existant domain
libxl: error: libxl_domain.c:1136:domain_destroy_callback: Domain 1:Unable to destroy guest
libxl: error: libxl_domain.c:1063:domain_destroy_cb: Domain 1:Destruction of domain failed
Move the ABI check earlier into xc_dom_parse_image() along with other
ELF-note feature checks. With this adjustment, it now looks like
this:
xc: error: panic: xg_dom_boot.c:88: xc_dom_compat_check: guest type xen-3.0-x86_32p not supported by xen kernel, sorry: Invalid kernel
libxl: error: libxl_dom.c:571:libxl__build_dom: xc_dom_parse_image failed
domainbuilder: detail: xc_dom_release: called
libxl: error: libxl_create.c:1573:domcreate_rebuild_done: Domain 11:cannot (re-)build domain: -3
libxl: error: libxl_domain.c:1182:libxl__destroy_domid: Domain 11:Non-existant domain
libxl: error: libxl_domain.c:1136:domain_destroy_callback: Domain 11:Unable to destroy guest
libxl: error: libxl_domain.c:1063:domain_destroy_cb: Domain 11:Destruction of domain failed
Suggested-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Jane Malalane <jane.malalane@citrix.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Ian Jackson <iwj@xenproject.org>
Valid GFNs (having a representation in the dirty bitmap) need to be
strictly below p2m_size.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
minfo->p2m_size may have more than 31 significant bits. Change the
induction variable to unsigned long, and (largely for signed-ness
consistency) a helper variable to unsigned int. While there also avoid
open-coding min().
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
This adds an option to the xl domain configuration file syntax for specifying
a kernel command line for device-model stubdomains. It is intended for use with
Linux-based stubdomains.
Signed-off-by: Scott Davis <scott.davis@starlab.io>
Reviewed-by: Jason Andryuk <jandryuk@gmail.com>
Acked-by: Ian Jackson <iwj@xenproject.org>
Current unit8_t for pirq argument in this interface is too restrictive
causing failures on modern hardware with lots of GSIs. That extends down to
XEN_DOMCTL_irq_permission ABI structure where it needs to be fixed up
as well.
Internal Xen structures appear to be fine. Existing users of the interface
in tree (libxl, ocaml and python bindings) are currently using signed int
for pirq representation which should be wide enough. Converting them to
uint32_t now is desirable to avoid accidental passing of a negative
number (probably denoting an error code) by caller as pirq, but left for
the future clean up.
Domctl interface version is needed to be bumped with this change but that
was already done by 918b8842a8 ("arm64: Change type of hsr, cpsr, spsr_el1
to uint64_t") in this release cycle.
Additionally, take a change and convert allow_access argument to bool.
Signed-off-by: Igor Druzhinin <igor.druzhinin@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Christian Lindig <christian.lindig@citrix.com>
Acked-by: Julien Grall <jgrall@amazon.com>
Commit 0dbb4be739 add the inclusion of xenctrl.h from private.h and
wreck the build in an interesting way:
In file included from xen/stubdom/include/xen/domctl.h:39:0,
from xen/tools/include/xenctrl.h:36,
from private.h:4,
from minios.c:29:
xen/include/public/memory.h:407:5: error: expected specifier-qualifier-list before ‘XEN_GUEST_HANDLE_64’
XEN_GUEST_HANDLE_64(const_uint8) buffer;
^~~~~~~~~~~~~~~~~~~
This is happening because xenctrl.h defines __XEN_TOOLS__ and therefore
the public headers will start to expose the non-stable ABI. However,
xen.h has already been included by a mini-OS header before hand. So
there is a mismatch in the way the headers are included.
For now solve it in a very simple (and gross) way by including
xenctrl.h before the mini-os headers.
Fixes: 0dbb4be739 ("tools/libs/foreignmemory: Fix PAGE_SIZE redefinition error")
Signed-off-by: Julien Grall <jgrall@amazon.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
If PAGE_SIZE is already defined in the system (e.g. in /usr/include/limits.h
header) then gcc will trigger a redefinition error because of -Werror. This
patch replaces usage of PAGE_* macros with XC_PAGE_* macros in order to avoid
confusion between control domain page granularity (PAGE_* definitions) and
guest domain page granularity.
The exception is in osdep_xenforeignmemory_map() where we need the system page
size to check whether the PFN array should be allocated with mmap() or with
dynamic allocation.
Signed-off-by: Costin Lupu <costin.lupu@cs.pub.ro>
Reviewed-by: Julien Grall <jgrall@amazon.com>
Acked-by: Ian Jackson <iwj@xenproject.org>
If PAGE_SIZE is already defined in the system (e.g. in /usr/include/limits.h
header) then gcc will trigger a redefinition error because of -Werror. This
patch replaces usage of PAGE_* macros with XC_PAGE_* macros in order to avoid
confusion between control domain page granularity (PAGE_* definitions) and
guest domain page granularity.
The exception is in osdep_xenforeignmemory_map() where we need the system page
size to check whether the PFN array should be allocated with mmap() or with
dynamic allocation.
Signed-off-by: Costin Lupu <costin.lupu@cs.pub.ro>
Reviewed-by: Julien Grall <jgrall@amazon.com>
Acked-by: Ian Jackson <iwj@xenproject.org>
918b8842a8 changed CPSR and SPSR to be stored as 64bit values.
This is fixing the print size in some tools to use 64bit type.
Fixes: 918b8842a8 ("arm64: Change type of hsr, cpsr, spsr_el1 to uint64_t")
Signed-off-by: Bertrand Marquis <bertrand.marquis@arm.com>
Reviewed-by: Michal Orzel <michal.orzel@arm.com>
Tested-by: Michal Orzel <michal.orzel@arm.com>
Introduce a helper which decides if a given pfn type has data
in the migration stream.
No change in behaviour intended, except for invalid page types which now
have a safer default.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Introduce a helper which decides if a given pfn in the migration
stream is backed by memory.
This highlights more clearly that type XEN_DOMCTL_PFINFO_XALLOC (a
synthetic toolstack-only type used between Xen 4.2 to 4.5 which
indicated a dirty page on the sending side for which no data will be
send in the initial iteration) does get populated in the VM.
No change in behaviour intended, except for invalid page types which now
have a safer default.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Andrew Cooper
Jan Beulich
Anthony PERARD
Juergen Gross
Roger Pau Monné
Rahul Singh
Michal Orzel
Oleksandr Tyshchenko
Ian Jackson
Oleksandr Andrushchenko
Kevin Stefanov
Jane Malalane
Fabrice Fontaine
Alan Robinson
Scott Davis
Igor Druzhinin
Julien Grall
Costin Lupu
Richard Kojedzinszky
Bertrand Marquis
Olaf Hering